BGBQ-1 - Punching bag Vevor - Free user manual and instructions

Product type	Reaction striking bag (reaction ball)
Brand	Vevor
Model	BGBQ-1
Mounting	Wall-mounted (with expansion screws included)
Materials	Steel (bracket), PVC (reaction ball)
Usage	Indoor, domestic use only
Maintenance	Clean with a soft cloth and soapy water; avoid harsh solvents
Periodic check	Tighten screws every 60 days
Safety	Prohibited for children under 12 without supervision; maintain a distance of 3 m
Package contents	Wall bracket, reaction ball, springs, rods, screws, base (depending on model)
Functions	Improves reflexes, speed, hand-eye coordination
Installation	Attach to the wall using expansion screws; mount the lever and ball
Warranty	Electronic warranty certificate at vevor.com/support
Customer service	Technical support via vevor.com/support
Repairability	Spare parts listed in the manual (lever, springs, ball, etc.)

Frequently Asked Questions - BGBQ-1 Vevor

How to install the Vevor BGBQ-1 reaction ball?

First, attach the wall bracket to a solid wall using the provided expansion screws. Then mount the lever, reaction rod, and ball according to the manual diagram. Make sure everything is securely tightened before use.

What maintenance does this reaction striking bag require?

Clean the surface with a soft cloth and soapy water. Avoid harsh solvents. Every 60 days, check and tighten the mounting screws.

Can children use this product?

Children under 12 must not come within 3 meters of the bracket. Ages 12-18 must be supervised by an adult. For family use only.

What are the dimensions of the reaction ball?

The manual does not specify exact dimensions, but the ball is standard size for reflex training (approximately 20-30 cm diameter). Check the product received for measurements.

Can I use this product outdoors?

No, the Vevor BGBQ-1 striking bag is designed for indoor use only. It must be stored away from moisture and dust.

What is the maximum weight supported by the bracket?

The manual does not specify a maximum load, but the bracket is designed to absorb moderate hits. Avoid excessive force.

Where can I find spare parts?

Spare parts (lever, springs, ball, etc.) are listed in the manual. Contact customer service at vevor.com/support to order.

How to clean the ball and bracket?

Use a soft non-abrasive cloth with a little water and mild soap. Dry with a clean cloth. Do not use harsh chemicals.

Is the product delivered with a warranty?

Yes, Vevor provides an electronic warranty certificate available at vevor.com/support. Keep your proof of purchase.

How to contact Vevor customer service?

Go to vevor.com/support for technical support and warranty. There you will find contact details for your region.

USER MANUAL BGBQ-1 Vevor

Technical Support and E-Warranty Certificate www.vevor.com/support

PUNCHING BAG

MODEL: BGBQ-1

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical Support and E-Warranty Certificate

www.vevor.com/support

We continue to be committed to provide you tools with competitive price.

"Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us. You

are kindly requested to verify carefully when you are placing an order with us if you are actually saving half in comparison with the top major brands.

VEVOR®

TOUGH TOOLS, HALF PRICE

PUNCHING BAG

MODEL: BGBQ-1

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

Technical Support and E-Warranty Certificate

www.vevor.com/support

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.

Thank you very much for choosing this product. Please read all of the instructions before using it. The information will help you achieve the best possible results.

INTRODUCTION

SAVE THESE INSTRUCTIONS

WARNING:

Please read all instructions before using this product.

It is the owner's responsibility to ensure that all users of this product are fully aware of all warnings and precautions.

• Children or persons with disabilities must be closely supervised when using the boxing ring. - Do not drop or insert anything into any hole.

• Boxing stands are for family use only. Do not use this product for any commercial, rental, school, or institution.
• Do not use outside.
• Keep the product indoors, away from moisture and dust. Choose a flat surface with a mat underneath it to protect the floor or carpet. Make sure there is enough space to install, disassemble, and use this product.
• Keep hands and feet away from moving parts.
• Check whether the installation is firm before use to avoid

potential safety hazards.

- Check and tighten the screw interface of each component regularly.

- It should be stored in a dry environment if not used for a long time.

At NO time should pets or children under the age of 12 be closer to the Boxing Stand than 3 m (10 feet). At NO time should children under the age of 12 use the Boxing Stand. Children over the age of 12 should not use the Boxing Stand without adult supervision.

PART LIST

NO Part Name		Qty
1 Lift The Regulato		2
2	Pillar	1
3	Swing Arm Regulator	1
4	Round Gasket (030mm)	1
5	Latch Needle 1
6	Expansion Screws 4
7 The Base		1
8 Fixed Bolt 1
9 UtmgLeve 1

NO Part Name Q_ty
10	Beanng Orbit	4
11	Roller	2
12	Round GasKe<(@$0mm)	1
13 Reaction Rod 1
14	Spnngs	1
15 Gaskets		1
16	Reacbon Ball	1

ASSEMBLY

Step 1: First install the pillar according to the drawing

Step 2: Install fixed supports and bases according to the drawings

Step 3: Fix the lever to the bracket according to the drawing installation, and then install the reaction rod and reaction ball on the lever

Step 4: After the overall installation is completed according to the drawing fix it on the wall

PRODUCT SIZE CHART

CLEANING AND MAINTENANCE

-Use a soft, clean cloth that will not scratch the surface when dusting. -This item could be cleaned with soap and water. Be sure to avoid harsh solvents and abrasives. • Periodically (every 60 days) make sure the screws are fully tightened.

Manufacturer: Shanghaimuxinmuyeyouxiangongsi

Address: Baoshan District, Shuangcheng Road 803, Lane 11, No. 1602A-1609

Shanghai

Imported to AUS: SI HAO PTY LTD. 1 ROKEVA STREET EASTWOOD

NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim

Place, Rancho Cucamonga, CA91730

Pooledas Group Ltd

Unit 5 Albert Edward House,

The Pavilions Preston, United Kingdom

pooledas [e-mail]

01772418127

SHUNSHUN GmbH

Rdmer^cker 9 Z2021.76351

V ETV LER®

TOUGH RIX MCO, HALF P

www.vevor.com/support

VEVOR®

PUNCHING BAG

TOUGH TOOLS, HALF PRICE

MODEL: BGBQ-1

NEED HELP? CONTACT US!

www.vevor.com/support

ASSEMBLY

Step 1: First install the pillar according to the drawing.

Step 2: Install fixed supports and bases according to the drawings.

PRODUCT SIZE CHART

CLEANING AND MAINTENANCE

Pooledas Group Ltd Unit

5 Albert Edward House, The

Rdmer^cker 9 Z2021.76351

Linkenheim-Hochstetten, Germany

[e-mail] +49

1727041930

Made in China

V UND V DER R ^®

TOUG REZSOLS, HALF P

www.vevor.com/support

VEVOR®

Boxing bag

ROBUST TOOLS AT HALF PRICE

MODEL: BGBO-1

ASSEMBLY

Step 1: First install the pillar according to the drawing

Step 2: Install fixed supports and bases according to the drawings

PRODUCT SIZE TABLE

Pooledas Group Ltd Unit 5

Albert Edward House, The Pavilions

VEVILR®

H ATOLESE RISOF P

www.vevor.com/support

Machine Translated by Google

VEVOR®

DURABLE UTENSILS, HALF PRICE

BOXING BAG

MODEL: BGBQ-1

www.vevor.com/support

Machine Translated by Google

Machine Translated by Google

ASSEMBLY

Step 1: First install the pillar according to the drawing

Step 2: Install fixed supports and bases according to the drawings

Machine Translated by Google

Imported in AUS: SI HAO PTY LTD. 1 ROKEVA STREET EASTWOOD NSW 2122 Australia

Imported in USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA91730

Pooledas Group Ltd Unit

5 Albert Edward House, The Pavilions

Preston, United Kingdom pooledas [e-mail]

Rdmer'cker 9 Z2021.76351

V Y V ELR ^®

H ATOGO HABFZ P

VEVOR®

SAND BAG

TOOLS RESISTANT AT HALF PRICE

MODEL: BGBQ-1

ASSEMBLY

Step 1: First install the pillar according to the drawing.

Step 2: Install fixed supports and bases according to the drawings.

CLEANING AND MAINTENANCE

Rdmer^cker 9 Z2021.76351

Linkenheim-Hochstetten, Germany

[e-mail] +49

1727041930

Made in China

VIVO R®

H DOTOLG,GRYALF P

www.vevor.com/support

VEVOR®

Training bag

DURABLE TOOLS, HALF PRICE

MODEL: BGBQ-1

NEED HELP? CONTACT US!

ASSEMBLY

Step 1: First install the pillar according to the drawing

Step 2: Install fixed supports and bases according to the drawings

PRODUCT SIZE TABLE

CLEANING AND MAINTENANCE

Pooledas Group Ltd Unit 5

Albert Edward House, The Pavilions

V EVOR®

Technical support and e-warranty certificate www.vevor.com/support

BOX CONTENTS

MODEL: BGBQ-1

VEVOR®

www.vevor.com/support

VEVOR®

BOX

ROBUST TOOLS, HALF PRICE

MODEL: BGBQ-1

NEED HELP? CONTACT US

WARNING: TO REDUCE THE RISK OF INJURY.

SAVE THESE INSTRUCTIONS

A—^WARNING:

ASSEMBLY

Step 1: First install the pillar according to the drawing

Step 2: Install fixed supports and bases according to the drawings

PRODUCT DATA TABLE

CLEANING AND MAINTENANCE

Pooledas Group Ltd Unit

5 Albert Edward House, The Pavilions

Rdmer^cker 9 Z2021.76351

V och V DER ^®

OLS, HALF PRISH TILLTUGT

www.vevor.com/support

VEVOR®

SLAGSÄCK

TÄRA VERKTYG, HALVA PRISET

MODEL: BGBQ-1

NEED HELP? CONTACT US!

ASSEMBLY

Step 1: First install the pillar according to the drawing

Step 2: Install fixed supports and bases according to the drawings

CLEANING AND MAINTENANCE

Pooledas Group Ltd Unit 5

Albert Edward House, The Pavilions

Preston, United Kingdom pooledas [e-mail]

01772418127

SHUNSHUN GmbH

Rdmer*cker 9 Z2021.76351

Linkenheim-Hochstetten, Germany

[e-mail] +49

1727041930

Made in China