SUS-8442 - Foldable game table Vevor - Free user manual and instructions

Product Type	Folding Game Table
Brand	Vevor
Model	SUS-8442
Dimensions (estimated)	Approximately 213 x 107 x 76 cm (84 x 42 x 30 inches)
Weight (estimated)	Approximately 25 kg
Main Material	MDF with felt or faux leather covering
Number of Players	Up to 8
Folding Type	Fold in half with safety latch
Adjustable Playing Surface	Yes, flatness adjustment via adjustment screws (2 screws)
Folding Legs	Yes, two sets of legs unfold laterally
Intended Use	Indoor only, domestic use (card games, poker, etc.)
Maximum Load Capacity (estimated)	Approximately 50 kg (normal use, do not sit or stand on it)
Assembly Required	Yes, by two people (unfolding and adjustment)
Maintenance	Wipe with a soft, dry cloth
Cleaning	Clean water and immediate drying; do not use abrasive cleaners
Safety	Do not allow children to climb; do not sit or stand; risk of pinching when folding
Warranty	Technical support and electronic warranty certificate at www.vevor.com/support
Technical Support	www.vevor.com/support
Spare Parts	Not specified; contact Vevor support
Repairability	Simple adjustments possible; for complex repairs, contact customer service
General Information	Imported to the United States by Sanven Technology Ltd.; made in China

Frequently Asked Questions - SUS-8442 Vevor

How to assemble the Vevor SUS-8442 game table?

Assembly requires two people. Unbolt the safety latch, unfold the tabletop, open the left and right legs being careful not to pinch your hands, then turn the table over. Adjust the flatness of the tabletop using the adjustment screws located underneath the table. For more details, refer to steps 1 to 4 of the manual.

How to adjust the tabletop if it is not flat?

If the tabletop is concave, tighten screws 1 and 2. If it is convex (bulging upward), loosen screws 1 and 2. These screws are located under the tabletop. Make adjustments gradually until a flat surface is achieved.

What is the maximum weight the table can support?

The manual does not specify an exact maximum weight, but it advises against placing heavy objects, sitting, or standing on the table. For normal use (games, drinks, etc.), estimate a maximum load of approximately 50 kg.

How to clean the game table?

Wipe with a soft, dry cloth. If necessary, use a damp cloth with clean water, then dry immediately. Never use abrasive cleaners or harsh pads. Avoid contact with animal urine or feces which could damage the covering.

Can this table be used outdoors?

No, this table is designed for indoor use only. Moisture, direct heat (radiators, burners), and ignition sources (fireworks, cigarettes) can damage the table or cause a fire.

Can children play on this table?

Children must not climb, play on or under the table. Supervise them constantly to avoid any risk of tipping or injury. Cleaning by children is also not recommended.

How to fold and store the table?

To fold the table, reverse the assembly steps: lower the legs, fold the tabletop in half, then lock the safety latch. Store it in a dry place, protected from dust. Use the provided cover if available.

What to do if a part is damaged or missing?

Contact Vevor technical support via www.vevor.com/support. Have the model number (SUS-8442) and proof of purchase ready. Support can provide replacement parts or advice.

Can I sit or stand on the table?

No, this is strictly prohibited. The table is not designed to support a person's weight. Sitting or standing can cause collapse and serious injury.

Where to find the complete user manual?

The complete manual is available for free download in PDF format on the site notice-facile.com. You can also consult the original manual on the Vevor support site (www.vevor.com/support). If your language is not available, you can request a translation by email.

USER MANUAL SUS-8442 Vevor

Technical Support and E-Warranty Certificate www.vevor.com/support

FOLDING POKER TABLE

MODEL: SUS-7232 / SUS-8442

We continue to be committed to provide you with tools at competitive prices. "Save Half", "Half Price" or any other similar expressions used by us only represent an estimate of savings you might benefit from buying certain tools with us compared to top brands, and does not necessarily mean to cover all categories of tools offered. You are kindly reminded to verify carefully when placing an order with us that you are actually saving half in comparison with the top major brands.

VEVOR®

TOUGH TOOLS, HALF PRICE

FOLDING POKER TABLE

MODEL: SUS-7232 MODEL: SUS-8442

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of the user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you if there are any technology or software updates on our product.

	Warning-To reduce the risk of injury, user must read instructions manual carefully.
	Do not allow children to climb or play on or under ba
	Do not sit or stand on table. Do not place heavy obj desktop.
	Be careful to pinch your hands.

SAFETY WARNINGS AND PRECAUTIONS

Thank you for using this product. In order to make sure that you can operate the machine correctly, read this instruction carefully before operation and keep it properly for future reference. Please be sure to follow the precautions and safety rules in this page to ensure your safe use. The manual will outline safety warnings and precautions, operating, maintenance and cleaning. The warnings and instructions reviewed in the manual cannot cover all possible conditions and situations that may occur. Caution and common sense are not built into this product, since we assume that the users will comply with these codes.

Please read ALL the instructions before using your machine.

1. Assemble needs to follow these instructions. Incorrect assembly can cause a hazard. Wear heavy-duty work gloves during assembly.
2. Do not assemble when tired or when under the influence of alcohol, drugs, or medication.
3. Keep the assembly area clean and well-lit.
4. Keep bystanders out of the area during assembly.
5. Do not allow children and pets to play alone or approach this item. Climb Products.
6. Use as intended only. Do not sit or stand on the product.
7. Inspect before every use. Do not use it if parts are loose or damaged.
8. People or objects hanging on the product will cause the product to tip over.
9. For indoor use only. Do not place heavy objects on the product.
10. DO NOT CLEAN IT WITH ANY ABRASIVE MATERIAL.
11. Pet urine and feces can damage the product, please keep away.
12. Do not place the product on or near hot air, electric burners, or fire. Fireworks, cigarettes, flares, and other items can ignite the product. Please stay away from them.
13. The product should be placed on a flat surface. And it should be installed in an open and safe place.
14. Do not place it in a damp environment.

WARNING:

1. This appliance is not intended for use by young or infirm pets unless supervised by a responsible person to ensure that they can use the appliance safely. Young children should be supervised to ensure that they do not play with the product. Pets should stay away from the product.

ASSEMBLY STEPS

1. Please dispose of all plastic bags carefully and keep them away from children and pets.
2. Check all components provided according to the list in this manual. Make sure you have all of the parts listed.
3. Although paying particular attention when manufacturing this product, you must be careful during the assembly process to avoid being scratched by sharp edges.
4. Wear protective gloves during assembly and use.
5. The product should be placed on a flat surface.
6. The product requires two people to assemble.

TIPS: Before installation, the packaging can be laid flat on the ground, and the product placed on the packaging for assembly to protect the product.

Note: The assembly and adjustment methods for both machines are the same.

STEP 1: Unbuckle the safety buckle and unfold the product.

STEP 2: Open the left and right legs.

Attention: Be careful not to pinch your hands.

STEP3: Flip product.

Attention: Be careful to pinch your hands.

STEP4: Make the tabletop flat by adjusting the bolts.

ADJUST DESKTOP

1. If the table top is concave, tighten screws 1 and 2.

1. If the desktop protrudes upward, loosen screws 1 and 2

CLEANING AND STORAGE

1. Wipe with a soft, dry cloth. Never use an abrasive cleanser or harsh chemicals. Wipe with clean water. Keep product dry after cleaning.
2. Children are not allowed to wipe the product to avoid tipping and injuries.
3. After the product is disassembled, please put the parts and accessories together.
4. If it will not be used for a long time, please fold the product, lock safety buckles, and put on the dust cover.

Manufacturer: Shanghai Muxin Muye Youxiangongsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, Baoshanqu, Shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREET EASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69, 60329 Frankfurt am Main

UK

REP

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical Support and E-Warranty Certificate

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

NEED HELP? CONTACT US!

Manufacturer: Shanghaimuxinmuyeyouxiangongsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Imported in Australia: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

A/S YH Consulting Limited Office 147, Centurion

Maison, London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

Manufacturer: Shanghaimuxinmuyeyouxiangongsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, Shanghai 200000 CN.

Imported into AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported into the USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

Vertreter der EG

E-CrossStu GmbH

Mainzer Landstr.69, 60329 Frankfurt am Main.

UK

REP

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147, Centurion

House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Imported in AUS: SIHAO PTY LTD. 1 ROKEVA STREET EASTWOOD

New South Wales 2122 Australia

Imported in USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim

Place, Rancho Cucamonga, CA 91730

C/O YH Consulting Limited Office 147, Centurion

House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

electronics www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Manufacturer: Shanghaimuxinmuyeyouxiangongsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Imported to Australia: SIHAO PTY LTD. 1 ROKEVA STREET EASTWOOD

House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

NEED HELP? CONTACT US!

STEP 3: Turn the product.

Manufacturer: Shanghaimuxinmuyeyouxiangongsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, Shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREET EASTWOOD NSW 2122 Australia

C/O YH Consulting Limited Office 147, Centurion

House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

NEED HELP? CONTACT US!

Manufacturer: Shanghaimuxinmuyeyouxiangongsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, Baoshanqu, Shanghai 200000 CN.

C/O YH Consulting Limited, Kantoor 147, Centurion

Huis, London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

Warranty certificate www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

NEED HELP? CONTACT US!

Manufacturer: Shanghaimuxinmuyeyouxiangongsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, Baoshanqu, Shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD

NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim

Place, Rancho Cucamonga, CA 91730

EC

REP

E-CrossStu GmbH

Mainzer Landstr. 69, 60329 Frankfurt am Main.

UK

REP

YH CONSULTING LIMITED.

C/O YH Consulting Limited, Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

C/O YH Consulting Limited, Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support