WVD900 - Vacuum Cleaner Numatic - Free user manual and instructions

USER MANUAL WVD900 Numatic

WVD 1800-APWVD 1800-AP

Line drawing of three different vacuum cleaner units with wheels and control panels (no text or symbols)

Original Instructions

CAUTION, Read instructions before using the machine.

Technical line drawings of a hose, a curved tube, and a bracket (no text or symbols)

BS7
WVD1800DH
WVD1800PH
WVD1800AP

Technical line drawings of mechanical components including a coiled hose, two parallel tubes, and two clamps (no text or symbols)

BS8
WV570
WVD570
WV900
WVD900

Technical line drawings of a coiled hose, a curved tool, and a mechanical bracket (no text or symbols)

AS15
WV900

Line drawing of three different vacuum cleaner units with wheels and control panels (no text or symbols)

WV WVD1800 WV WVD570 WV WVD900

Handle Fitting Instructions - Anbringen des geraden Bügelgriffs - Instructions de montage de la poignée droite - Montage Instructie voor rechte handel - Montar a pega - Gruppo maniglia - Montaje del asa - Montowanie uchwytu - Montera handtag - Työntöaisan kiinnittäminen - Håndtagsenhed

Simple line drawing of a mechanical component or bracket with two horizontal supports and a central slot (no text or symbols)

2

Two gray cylindrical objects inside a circle, no text or symbols present

Illustration of hands holding a cylindrical object with a handle, no text or symbols present

Hand holding a screwdriver to adjust or install a mechanical component, with no visible text or symbols

5

Illustration of a hand holding a tool with three bolts, mounted on a pipe (no text or symbols)

Diagram showing two mechanical assembly steps with arrows indicating motion (no text or symbols)

Technical line drawing of a mechanical assembly with no visible text or symbols

Diagram of a mechanical assembly with a spring and downward arrow, no text or symbols present

Wet / Assembling the machine for extraction use - Montage der Maschine

Diagram showing three pipe fittings with arrows indicating direction (no text or symbols)

Illustration of a hand holding a tool interacting with a rope knot, with an arrow indicating the process (no text or symbols present)

Illustration of hands holding a tool with an arrow indicating motion (no text or symbols)

Illustration of hands holding a cable with a hose, showing a black arrow indicating direction (no text or symbols)

Technical line drawing of a mechanical component with coiled spring and threaded end (no text or symbols)

50mm A B A B

Line drawing of a vacuum cleaner with handle and wheels (no text or symbols)

Line drawing of a mechanical component with a central housing and curved base (no text or symbols)

1 Vac

WV 570

WVD570

WV 900

WVD900

WVD1800DH

Line drawing of a mechanical component with two circular indicators labeled 1 and 2 (no text or symbols on the diagram itself)

WVD1800PH WVD1800AP

1 Vac
2 Pump

Close-up of a hand adjusting a mechanical component with wires (no visible text or symbols)

Cleaning the machine - Reinigung der Maschine - Nettoyage de la machine - De machine reinigen - Limpeza da máquina - Pulizia apparecchio - Limpieza de la máquina - Czyszczenie maszyny - Rengöra maskinen - Koneen puhdistus - Rengöring af maskinen

Line drawing of a vacuum cleaner with four wheels and top-mounted air vent (no text or symbols)

Line drawing of hands holding a portable device with a small inset image below (no text or symbols)

WV 570

WVD 570

Line drawing of a vacuum cleaner with wheels and handle (no text or symbols)

Line drawing of a hand operating a portable water heater with a small outlet below (no text or symbols)

WV 900

WVD 900

Exterior view of a stainless steel bucket cart with handle and wheels (no text or symbols visible)

Industrial machine with two wheels and a cylindrical top, shown in grayscale (no text or symbols visible)

WV 750T WVD 750T

Tipper

Line drawing of a vacuum cleaner with wheels and handle (no text or symbols)

Line drawing of a vacuum cleaner with a handle and wheels, no text or symbols present

WVD 1800DH

Dump Hose

Line drawing of a vacuum cleaner with a magnified inset showing its internal components (no text or symbols)

Line drawing of a vacuum cleaner with attached control panel (no text or symbols)

WVD 1800PH / AP

Pump Hose Auto Pump

Technical line drawing of a mechanical assembly with circular components and internal components (no text or symbols)

Illustration of a hand pouring granular material from a cylindrical container into a slotted cup (no text or symbols)

WVD1800DH WVD1800PH WVD1800AP

Dry- Assembling the machine - Montage der Maschine - Montage de la machine - Machine samenstellen / opbouwen - A seco / Montar a máquina para utilização a seco - A secco / Assemblaggio dell'apparecchio per l'per uso a secco - SECO / Montaje de la máquina para uso en SECO - Na sucho / Montaż urządzenia do użytku NA SUCHO - Torrt / Montering av maskinen för torranvändning - Koneen käyttöönotto KUIV Akäyttöä varten - Tør / Samling af maskinen til tør brug

Illustration of a fan with printed documents and a small icon, likely depicting a document or book cover.

WV 570 / WVD 570

NVM - 3BH

WV 900 / WVD 900

NVM - 4BH

Line drawing of a vacuum cleaner with two circular insets showing internal components (no text or symbols)

graph TD
    A["1"] --> B["2"]
    B --> C["3"]

Diagram of a mechanical device with a hand holding a circular component and an arrow indicating force or movement (no text or symbols present)

graph TD
    A["1: Bag with dust collector"] --> B["2: Bag with dust collector"]
    B --> C["3: Machine with dust collector"]

HY-HEH MUNATE H.

Numatic HEPÁ-FLO

Illustration of a hand using a tool to adjust or install a mechanical component, with no visible text or symbols.

3

Illustration of a mechanical assembly with a hand holding a tool and a black arrow pointing to a component (no text or symbols present)

Line drawing of a mechanical component with a screwdriver inserted, showing rotational motion (no text or symbols)

4 5

6

Diagram of a plug inserted into an electrical socket, showing wiring and a directional arrow (no text or symbols present)

Illustration of a coiled cable with a connector (no text or symbols)

78

9

Technical line drawing of a mechanical component with a hand adjusting a cable (no text or symbols)

Mechanical diagram showing a tool interacting with a component, no text or symbols present

Illustration of hands using a tool to adjust or install a mechanical component, with no visible text or symbols.

11

1	company Name & Address
2	Model
3	Voltage/Alternating Current
4	frequency
5	Rated Input Power
6	Weight
7	gress Protection
8	WEEE Logo
9	protection Class 2 Symbol
10	Approval Mark
11	Machine yr/wk Serial Number

Numatic International Ltd. CHARD, ENGLAND, TA30308 ****** *V~ *Hz *W **kg IPX* Name and Address of EU Importers in Manual S/N:*******

DailyKeep the machine clean, including hoses and tubes.Ensure the bag and fi liter are fi tted, (Dry use).Empty dust bag if required.Clean and check fi oat safety valve for signs of damage.Regularly examine the power cord.Check fi Iters are clean.Weekly - as daily and:-Check for any worn or damaged parts and replace immediately.

MAINTENANCE

MAINTENANCE

WEEE Legislation (Waste, Electrical and Electronic Equipment)

Vacuum cleaner, accessories and packaging should be sorted for environmentally - friendly recycling.

(Only for EU Countries)

Do not dispose of vacuum cleaner into household waste! According to the European Directive 2012/19/EU on waste electrical and electronic equipment and its incorporation into national law. Vacuum cleaners that are no longer suitable for use must be separately collected and sent for recovery in an environmentally - friendly manner.

Symbol of a trash bin with crossed lines indicating no waste or discharge (no text or labels)

PPE (personal protective equipment). That may be required for certain operations.

Ear Protection Safety Footwear Head Protection		ction Safety Gloves
Eye Protection Protective Clothing		Dust / Allergens Protection	Hi Viz Jacket Caution Floor Sign

NOTE: A risk assessment should be conducted to determine which PPE should be worn.

Failure to rectify the problem or in the event of a breakdown contact your Numatic dealer or the Numatic Technical helpline [phone]
Mains leads:	Safety Critical Components
	HO5VV-F 10 m x 2 Core x 1.0 mm ^2
	GTSA 10 m x 2 Core x 1.0 mm ^2
	HO5VV-F 10 m x 3 Core x 1.5 mm ^2
	HVCTF 10 m x 2 Core x 1.25 mm ^2

Warning

Read the instruction manual before using the machine.

Operators shall be adequately instructed on the use of these machines.

As with all electrical equipment, care and attention must be exercised at all times during use,

in addition to ensuring that routine and preventative maintenance is carried out periodically to ensure safe operation.

Failure to carry out maintenance as necessary, including the replacement of parts to the correct standard could render this equipment unsafe and the manufacturer can accept no responsibility in this respect.

The machine shall be disconnected from the mains power by removing the plug from the power supply socket during cleaning or maintenance and when replacing parts or converting the machine to another function.

This machine is not to be used by children or persons with reduced physical, sensory or mental capabilities, or lack of experience or knowledge.

Children being supervised are NOT to play with the machine.

This appliance is intended to be assembled, cleaned and maintained by an adult.

This machine is not a toy.

This machine is not suitable for picking up hazardous or explosive dust. Contact your local distributor if you require a machine capable of performing these tasks.

Caution

If foam/liquid comes out of machine exhaust, switch off immediately.

Allow the accumulated liquid to drain out through the machine exhaust, check the float assembly to ensure correct operation, empty the container if full of liquid, reassemble the machine.

Immediately upon start up there will be a certain amount of liquid issuing from the machine exhaust which will be the residue of liquid still within the power head. This will be quickly discharged after which the machine should function normally.

Liquid ejected from the machine could be hazardous as a result of its temperature, pressure or chemical content.

Ensure that the fi ltration system fi tted to the machine is suitable for the material being collected.

This machine is for indoor use only.

This machine shall be stored indoors only.

When moving from one place to another, consider the weight of the machine.

Notes

You must ensure that the fi ltration system fi tted to the machine is suitable for the material being collected.

This product complies with the requirements of clause 20 of IEC/EN 60335-2-69 Stability and Mechanical Hazards.

The primary use for this machine is commercial, for example in hotels, schools, hospitals, factories, shops and offices.

If the vacuum cleaner stops working, remove the plug from the power supply before investigating where the fault lies.

The vacuum cleaner should be inspected after use for damage.

The power light will illuminate, when your machine is connected to a suitable power supply (where fitted).

Do

• Use a bag and fi Iter at all times when using 'dry'.
- Keep your machine clean.
- Keep fi Iters clean.
• Regularly clean the water level limiting float safety valve and examine for signs of damage or correct operation.
- Keep hoses and tubes clear.
- Replace any worn or damaged parts immediately.
• Regularly examine the power cord, if damage is found, the power cord must be replaced by a special cord available from Numatic or its service agents.

Don't

• Use steam cleaners or pressure washers to clean the machine or use the machine in the rain.
• Immerse in water for cleaning.
- Allow any inexperienced repairs. Call the experts.
• Use wet if fl oat valve is not functioning or fitted.
• Use to suck up hot ashes, or lighted cigarette ends.
• Run the machine over the power cable during operation as a hazard may occur.
• Pull on the cable to unplug the machine from the power supply.
• Walk over-wet carpets, upholstery or fabrics.
• Walk on clean carpets until fully dry.
• Attempt machine maintenance or cleaning unless the power supply plug has been removed from the supply outlet.
• Under any circumstances place foreign objects including (but not limited to) air fresheners, air freshener capsules or scented beads of any type into the top filter of the machine. Doing so can be dangerous and risk damage to the machine and may invalidate the machine warranty.

Dry Mode maintenance/fault fi nding

If the vacuum cleaner stops working switch off and remove the plug from the wall before investigating were the fault lies. If the vacuum cleaner will not pick up any debris from the surface, switch off and remove the plug from the wall, inspect the floor tool, wands and hose for blockages, if no blockages are found, the dust bag may be full if the dust bag is not full the filter may be blocked.

Wet mode

If the vacuum cleaner stops working switch off and remove the plug from the wall before investigating were the fault lies. If the vacuum cleaner has a blockage and will not pick up liquid, switch off and remove the plug from the wall, has the float valve operated, this will shut off the suction and the pitch of the vacuum motor will change.

Remove the power head and empty the liquid out of the container, if the container is empty, check that the floor tool wands and hose are not blocked.

Flush the system with clean water after use.

After use always inspect the machine for damage.

Symbol of a trash bin crossed with a diagonal line, no text or numbers present

Numatic International Ltd. CHARD, ENGLAND, TX3008 ****** *V~ *Hz *W **kg IPX* Name and Address of EU Importers in Manual S/N:********

Symbol of a trash bin with crossed lines indicating no waste or restriction, plus a solid black rectangle below (no text or labels)

Numatic International Ltd. CHARG, ENGLAND, TAXESUS ****** *** V~ *Hz ****W **kg IPX* Name and Address of EU Importers in Manual S/N:*******

Simple line drawing of a trash bin with crossed lines indicating no waste or discharge (no text or symbols)

Numatic International Ltd. CHARGO, ENGLAND, TX3038 ****** *V~ *Hz *W **kg IPX* Name and Address of EU Importers in Manual S/N:*******

Codziennie

Symbol of a trash bin crossed with no text or numbers, representing waste sorting or disposal (no text present)

Numatic International Ltd. CHARGO, ENGLAND, TX3038 ****** *V~ *Hz *W **kg IPX* Name and Address of EU Importers in Manual S/N:*******

Symbol of a trash bin with crossed lines indicating no waste or restriction, accompanied by a solid black rectangle below (no text or labels)

1	ompany Name & Address
2	Model
3	Voltage/Alternating Current
4	Frequency
5	Rated Input Power
6	Weight
7	gress Protection
8	WEEE Logo
9	rotection Class 2 Symbol
10	Approval Mark
11	Machine yr/wk Serial Number

Numatic International Ltd. CHARD, ENGLAND, TUSKOSA ****** *V~ *Hz *W **kg IPX* Name and Address of EU Importers in Manual S/N:*******

Symbol of a trash bin with crossed lines indicating no waste or discharge, and a solid black rectangle below (no text or labels)

You must ensure that the fi ltration system fi tted to the machine is suitable for the material being collected.

This product complies with the requirements of clause 20 of IEC/EN 60335-2-69 Stability and Mechanical Hazards.

The primary use for this machine is commercial, for example in hotels, schools, hospitals, factories, shops and offices.

If the vacuum cleaner stops working, remove the plug from the power supply before investigating where the fault lies.

The vacuum cleaner should be inspected after use for damage.

The power light will illuminate, when your machine is connected to a suitable power supply (where fitted).

OIKEIN

Numatic International Ltd. CHAND, ENGLAND, TAXISER ****** *** V~ **Hz ****W **kg IPX* Name and Address of EU Importers in Manual S/N:*******

Dagligt

Symbol of a trash bin crossed with a diagonal line, no text or numbers present

L E N 3 DELAY START PCB 2 1 M M

14" (WVD) Duplex 120V

WD-0257

L E N 3 DELAY START PCB 2 1 M M

SWITCH COVER 206573 BLUE SWITCH 220843 SUPPRESSOR 230234 BROWN LINK WIRE 250MM LG 320094 WHITE LINK WIRE 321084 O/LOAD 220532 WHITE LINK WIRE 320997

BROWN LINK WIRE 200mm 320003 GREEN SWITCH 220582 BROWN LINK WIRE 380mm 320947 SUPPRESSOR 230234 BLUE SWITCH 220843 N L BLUE LINK WIRE 200mm 320183 PTO SOCKET 229018 BLUE LINK WIRE 380mm 320946 BLUE LINK WIRE 300mm LG 220336 BROWN LINK WIRE 250MM LG 320094 WHITE LINK WIRE 321084 O/LOAD 220532 WHITE LINK WIRE 320997

SUPPRESSOR 230234 BLUE SWITCH 220843 BLUE LINK WIRE 300mm LG 321990 BROWN LINK WIRE 220mm LG 220336 WHITE LINK WIRE 255mm LG 321087 UNIVERSAL DELAY RELAY 906039 DRV-24904 A41 WHITE LINK WIRE 190mm LG 321089 BROWN LINK WIRE 220mm LG 220336 0/LOAD 220532 220V MOTOR 205410 REAR MOTOR WHITE LINK WIRE 150mm LG 321088 220V MOTOR 205410 FRONT MOTOR

BROWN LINK WIRE 200mm 320003 GREEN SWITCH 220582 BROWN LINK WIRE 380mm 320947 SUPPRESSOR 230234 BLUE SWITCH 220843 PTO SOCKET 229018 BLUE LINK WIRE 380mm 320946 BLUE LINK WIRE 200mm 320183 N E L BLUE LINK WIRE 300mm LC 220336 BROWN LINK WIRE 220mm LC 220336 UNIVERSAL DELAY RELAY 906039 DRW-24904 A41 WHITE LINK WIRE 210mm LG 321087 WHITE LINK WIRE 190mm LC 321089 BROWN LINK WIRE 260mm LG 320995 0/LOAD 220532 BROWN LINK WIRE 220mm LG 220336 220V MOTOR 205410 REAR MOTOR WHITE LINK WIRE 150mm LG 321086 FRONT MOTOR

SWITCH COVER 208573 BROWN LINK WIRE 200mm 320003 GREEN SWITCH 220582 BROWN LINK WIRE 380mm 320947 BLUE LINK WIRE 200mm 320183 GREEN LINK WIRE 500mm 320429 BLUE LINK WIRE 380mm 320946 PTO SOCKET 229018 E SUPPRESSOR 220142 L N SWITCH COVER 206573 BLUE SWITCH 220643 BLUE LINK WIRE 300mm LG 320044 3 DELAY START MODULE 220556 1 2 BROWN LINK WIRE 220mm LG 220336 WHITE LINK WIRE 255mm LG 321087 WHITE LINK WIRE 190mm LG 321089 BROWN LINK WIRE 250mm LG 320995 O/LOAD 220532 BROWN LINK WIRE 220mm LG 320287 REAR MOTOR FRONT MOTOR

UKCA Declaration of Conformity
Manufacturer:	Numatic International LimitedChardSomersetTA20 2GBwww.numatic.co.uk			EU, EC, EL, UE, ES:Declaration of ConformityProhäläseni o shodëKonformitatserklarungOverensstemmelseserklæringDeclaración de conformidadVastavusdeklaratsioonDéclaration de conformité	Декларация за съответствиеΔηλωση συμμόρφωσηςMegfelelőségi nyliatkozatDichlarazione di conformitàAttikties deklaracijaConformiteitsverklaringSamsvarserklæringDeclaração de conformidade
Product:	WV, WVD, CV, CVD		Manufacturer: / Výrobce / Hersteller / Fabrikant / Fabricante / Tootja / Fabricant / производитель / Kataokseuaotíc / Gyártó / Fabbricante / Gamintojas / Fabrikant / Produsent / Fabricante / Producent / Producátor / производитель / Tillverkare / Proizvajalca / Valmistaja:		Numatic International LimitedChardSomersetTA20 2GBwww.numatic.co.uk
Description:	Vacuum Cleaner – Commercial – Wet & Dry		Product: / Produkt / Produkt / Produkt / Producto, Toodet, Produit / Проdykt / Проϊöv / Termék / Prodotto / Produktas / Artikel / Produkt / Produtos / Produkt / Produs / товар / Produkt / Izdelka / Tuote:		WV, WVD, CV, CVD, SSIVD
			Description: / Popis / Beschreibung / Beskrivelse / Descripción / Kirjeldus / La description / Описание / Перурафή / Leirás / Descrizione / Apibudinimas / Omschrijving / Beskrivelse / Descrição / Opis / Descriere / Описание / Beskrivning / Opis / Kuvaus:		Vacuum Cleaner – Commercial – Wet & Dry
We, Numatic hereby declare under our sole responsibility, that the above-mentioned product(s) is/are in conformity with the following directives and standards.			EN We, Numatic hereby declare under our sole responsibility, that the above-mentioned product(s) is/are in conformity with the following directives and standards.CZ My, Numatic prohlašujeme na syou vylučnou odpovědnost, že výše uvedený vyrobek je ve shodě s nasledujcimi směrnicemi a normami.DE Wir, Numatic erklären in alleiniger Verantwortung, dass das oben genannte Produkt den folgenden Richtlinien und Normen entspricht.DA VI, Numatic erklærer hermed under eget ansvar at ovennaavnite produkt(er) er i overensstemmelse med folgende direktiver og standarder.		PT Nós, a Numatic declaramos, sob nossa exclusiva responsabilidade, que o produto acima mencionado está em conformidade com as diretrizes e normas a seguir.PL My, Numatic Niniejszym oświadczy z pełną odpowiedzialnością, ze wyżej wymieniony produkt jest zgodny z następującymi dyrektywami i normami.RO Noi, Numatic Prin prezenta declarám pe propria räspundere, cā produsul mai sus menjonat este în conformitate cu urmätoarelle standarde yi directive.RU Mi, Нилифск овим изjavљујем под пуном одговорношу, да наведеног производ је у складу са следећим директивама и стандардима.SV Vi Numatic förklar härmed under eget ansvar att ovan nämnda produkt överensstämmer med foljande direktiv och normer.SL MI, Numatic izjavljamo s polno odgovornostjo, da je zgoraj omenjeni izdelek v skladu z naslednjimi smernicami in standardi.FI Me, Numatic täten vakuutamme omaila vastuulla, että edellä mainittu tuote on yhdenmukainen seuraavien direktivien ja standardien mukaisesti
S.I. 2008: 1597	Supply of Machinery Regulations	EN60335-1:2012 + AC:2014 + A11:2014 + A13:2017 + A15:2021EN60335-2-69:2012EN62233:2008				BG Hne, Numatic С настоящото декларираме на свов лична отговорност, не посоченийте по-роре продуктет в съответствие сус следните директиви и стандарти.EL Ejusic, Numatic δηλώνουμε με αποκλειστική μας ευδύνη, ότο το προσανφερόμενο προϊόν αυμμορφώνεται με τις ακέλουθες οδηγίες και πρατυπα.HU Mi, Numatic Kijelentijk, egyedüli feleldssäggel, hogy a fent emitlett termék megfelel az alábbi irányelveknek és szabványoknakIT Noi, Numatic dichiara sotto la propria responsabilità, che il prodotto di cui sopra è conforme alle seguenti direttive e norme.
S.I. 2016: 1091	EMC Regulations	EN55014-1:2017 + A11:2020EN55014-2:1997 + A1:2001 + A2:2008EN61000-3-2:2014EN61000-3-3:2013
S.I. 2012: 3032	RoHS Regulations		ES Nosotros, Numatic declaramos bajo nuestra única responsabilidad que el producto antes mencionado está en conformidad con las siguientes directivas y normasET Meie, Numatic Käesolevaga kinnitame ja kanname ainuisikulist vastutust, et eespool nimetatud toode on kooskõlas järgmiste direktiviide jaFR Numatic déclare sous notre seule responsabilité que le produit mentionné ci-dessus est conforme aux directives et normes suivantes.	LT Mes, "Numatic parelskiu vienačaliikos atsakomybės, kad pirmiaiu minetas produktas atitinka šlas direktyvas ir standardusNL We verklaren Numatic hierbij op eigen verantwoordelijkheid, dat het bovengenoemde product voldoet aan de volgende richtlijnen en normenNO VI, Numatic erklærer herved under eget ansvar, at det ovennevnte produktet er i samsvar med folgende direktiver og standardier
Authorised Signatory: Mr. Matthew Coles		Position: Head of TechnologyNumatic International Limited, Chard,Somerset, TA20 2GB, UK
Signed: M Colos Date: 2ndFebruary 2024			2006/42/EC	Machinery Directive	EN60335-1:2012 + AC:2014 + A11:2014 + A13:2017 + A15:2021EN60335-2-69:2012EN62233:2008
			2014/30/EU	EMC Directive	EN55014-1:2017 + A11:2020EN55014-2:1997 + A1:2001 + A2:2008EN61000-3-2:2014EN61000-3-3:2013
			2011/65/EU	RoHS Directive

Position: Head of Technology

Numatic International Limited

Chard,

nd February 2024 Somerset, TA20 2GB, UK

Numatic

numatic.com

Numatic International Limited (Head Office)

Chard, Somerset TA20 2GB, UNITED KINGDOM

Tel: [phone] numatic.com

Numatic International GmbH

Fränkische Straße 15-19, 30455 Hannover, DEUTSCHLAND

Tel: [phone] numatic.de

Numatic International Denmark

Fränkische Straße 15-19, 30455 Hannover, DEUTSCHLAND

Tel: [phone] numatic-online.dk

Numatic International S.A.S

Numatic International BV

Numatic International (PTY) Ltd.

Cnr. 16th & Pharmaceutical Road, Randjes Park, Midrand 1685, SOUTH AFRICA

Tel: [phone] numatic.co.za

Numatic International ULDA

Rua Francisco da Silva Duarte, n°79,

4475-269 Santa Maria de Avioso, Castêlo da Maia, PORTUGAL

Tel: [phone] numatic.pt

NUMATIC INTERNATIONAL SPAIN, S.L.U.

Av. Baix Llobregat, 5-7, Ofi cina bajos 1 (Parc Negocis Mas Blau II),

08820 El Prat de Llobregat (Barcelona) SPAIN

Tel: [phone] numatic.es

Numatic International Italy S.R.L

Via Luigi Galvani, 2, Z.I. Talponedo, 33080 Porcia (PN), ITALY

Tel: [phone] numatic.it

Specification subject to change without prior notice

numatic.com © Numatic International Limited