DOS214 - Hair Straightener LIVOO - Free user manual and instructions

Brand	Livoo
Model	DOS214
Product type	Hair straightener
Power supply	110-240 V ~ 50/60 Hz
Power	41 W
Standby consumption	0.37 W
Off consumption	0 W
Plate type	Ceramic plates
Maximum temperature	Approximately 200 °C (estimate)
Heating time	Approximately 45 seconds
Functions	On/Off, plate lock, hanging ring
Usage	Natural hair only, clean and detangled
Protection	Overheat protection
Safety	Do not use near water; unplug after use
Maintenance and cleaning	Clean with a damp cloth after cooling; do not use solvent
Cable length	Approximately 1.8 m (estimate)
Mains supply	Standard wall outlet

Frequently Asked Questions - DOS214 LIVOO

How to use the Livoo DOS214 hair straightener?

Ensure your hair is clean, detangled, and free of products. Plug in the device, press the on/off button, and wait about 45 seconds for it to heat up. Divide your hair into sections less than 5 cm, place a section between the plates near the root, squeeze, and slide toward the tips for about 5 seconds. After use, turn it off, lock the plates, and unplug.

What is the power supply voltage of the device?

The straightener operates on a voltage of 110-240 V ~ 50/60 Hz, allowing use in most countries with an adapter if necessary.

Are the plates suitable for all hair types?

Yes, the ceramic plates are suitable for all hair types. However, do not use the device on artificial hair or extensions.

How to clean the straightener?

Unplug the device and let it cool completely. Use a damp cloth to wipe the plates and body. Never use solvent or abrasive products.

What to do if the device overheats?

The device has overheat protection. If it overheats, turn it off completely and let it cool for 6 to 15 minutes before reusing.

Can I use the straightener in the bathroom?

No, it is forbidden to use the device near a bathtub, shower, sink, or any container with water to avoid the risk of electric shock.

How long does it take for the device to heat up?

The straightener reaches its operating temperature in about 45 seconds.

How to store the straightener after use?

Turn off the device, lock the plates using the lock button, then unplug it. Use the hanging ring to hang it on a hook. Never wrap the cable around the device.

Why does an odor occur during first use?

This is normal and due to manufacturing residues. Let the device heat for 3 to 5 minutes before first use to eliminate the odor.

Does the straightener have an automatic shut-off?

No, the device does not have an automatic shut-off. It is essential to turn it off manually after each use and never leave it plugged in unattended.

USER MANUAL DOS214 LIVOO

Close-up of a pair of hair styling iron with a curling iron, no text or symbols visible

Illustration of a hair styling iron with labeled parts (1, 2, 3, 4), no text or symbols on the object itself.

Figure 1

Symbol of a trash bin crossed with no text or labels, accompanied by a black rectangular block below (no readable text or symbols)

Thank you for choosing a Livoo product!

Your blenüer, your barbeòue, anù your heaùphones are not ëust obëeòts, they are extensions of yourself, allowinō you to õet òloser to your frienùs anù family, to brinō them toõether, to lauōh anù to share experienòes. Livoo's aim is to help you live your life to the fullest, whatever wishes you have throuõhout the year. Winter raòlette, summer barbeòue. Or the other way arounù. It's up to you. óake aùvantaõe of this freeùom for feel ōooù moments every ùay.

óhat's why we're òonstantly innovatinõ anù òreatinõ òlever protruòts full of zest, but most of all, aòössible. Finù our entire òolleòtion on our website www.livoo.en.

Livoo, your daily companion till social networks

@Livoo

@livoo_offiòiel

@Livoo

Safety Instructions

Please, take time to reaù well the instruòtion sheet before the first use anù keep them for a future use.

A misuse of the applianòe òan ùamaõe it or hurt the user. Assure that you use the applianòe for the use for whiòh it is ùesiõneù. We refuse any responsibilities as for the ùamaões by an inòorreòt use or a baù manipulation.

1. Before use, òheòk that the voltaõe of your wall outlet òorresponùs to the rateù voltaõe manner.

2. If the supply òorù is ùamaõeù, it must be replaõeù by the manufaòturer, its serviõe aõent or similarly qualifieù persons in orùer to avoiù a hazarù (*).

ê. Notã wÊăn unpaòkÁnõ tÊã applÁanòã:

ZANÕÄR Éor òÊÁlùrân. Danõär to IÁÉã tÊrouõÊ suÉÉoòatÁonà ûããp tÊã paòkaõÁnõ matãrÁal away Érom òÊÁlùrân.

1. óo prāvānt a lÁÉã-tÊrãatānÁnõ ălãòtrÁòal sÊoòk:

áARNING: Do not usã tÊÁs applÁanòã nãar ÜatÊtuÜs, sÊowãrs, ÜasÁns or otÊãr vãssãls aÁnÁnõ watãr.

áARNING: Do not usã tÊÁs ùãvÁòã Án a ÜatÊtuÜ sÊowãr, or watãr-ÉÁllãù rãsãrvoÁr.

1. áÊãn tÊã ÊaÁrùryãr Ás usãù Án a ÜatÊroom, unpluõ Át aÉtãr usã sÁnòã tÊã proxÁmÁty oÉ watãr prãsânts a Êazarù ãvãn wÊãn tÊã ÊaÁrùryãr Ás swÁtòÊãù oÉÉ.

2. Nãvãr Ámmãrsã tÊã applÁanòã Án watãr or Án any otÊãr lÁquÁùs.

è. Pull tÊã maÁns pluõ Érom tÊã soòkât:

• áÊăn a ùÁsturÜanòã oòòurs.a
• BãÉorã you ôlãan tÊã applÁanòã.a

• IÉ you wÁll not Üã usÁnõ tÊã applÁanòã Éor a lonõãr pãrÁoù.
  • AÉtãr ãaòÊ usã.a

• For aùùÁtÁonal protãòtÁon, tÊã ÁnstallatÁon oÉ a rãsÁùual òurrânt ùãvÁòã (RCD) ÊavÁnõ a ratãù

rãsÁùual opãratÁnõ òurrânt not ãxòããùÁnõ ê0 mA Ás aùvÁsaÜlã Án tÊã älãòtrÁòal òÁròuÁt supplyÁnõ t ÜatÊroom. Ask your Ánstallãr Éor aùvÁòã.

1. óÊÁs applÁanòã òan Üã usãù Üy òÊÁlùrãn aõãù Érom 8 yãars anù aÜovã anù pãrsons wÂtÊ rãùuòãù pÊysÁòal, sãnsory or mântal òapaÜÁlÁtÃãs or laòk oÉ ãxpãrÁānòã anù knowlãùõã ÁÉ tÊãy Êavã Üãān õÁvān supãrvÁsÁon or ÁinstruòtÁon òonòãrnÁr usã oÉ tÊã applÁanòã Án a saÉã way anù unùãrstanù tÊã Êazarùs Ánvolvãù.

â0. CÊÁlùrãn sÊall not play wÂtÊ tÊã applÁanòã.

ââ. ClăanÁnõ anù usãr maÁntănanòã sÊall not Üã maùã Üy òÊÁlùrân wÂtÊout supãrvÁsÁon.

â2. Burn Êazarù. ûããp applÁanòã out oÉ rãaòÊ Érom younõ òÊÁlùrãn, partÁòularly ùurÁnõ usã anù òool ùown.

âê. áÊãn tÊã applÁanòã Ás òonnãòtãù to tÊã powãr supply, nãvãr lãavã Át unattânùãù.

â4. Always plaòã tÊã applÁanòã wÂtÊ tÊã stanù, ÁÉ any, on a Êāat-rāsÁstant, staÜlã Élat surÉaòã.

â5. óo avoÁù Ürãaks nãvãr wÁnù tÊã òaÜlã arounù tÊã applÁanòã.

â6. áatòÊ out tÊat tÊã pluõ nãvãr òontaòts Êot parts oÉ tÊã applÁanòã.

âè. Only usã tÊã applÁanòã wÊãn tÊã applÁanòã, òaÜlã anù pluõ sÊow no sÁôn oÉ ùamaõã. Nãvãr usã a ùãÉãòtÁvã applÁanòã.

â8. Nãvãr try to rãpaÁr a ùãÉãòtÁvã applÁanòã yoursãl â9. Danõãr oÉ ÜurnÁnõà Platãs warm vãry Éast, ùo not touòÊ tÊãm. Holù tÊãm ùÁstant Érom your skÁn. °ât òool tÊãm aÉtãr usã.

Technical Specifications

ñoltaõã: ââ0-240ñ \~ 50-60Hz Powãr: 4âá

Powār òonsumptÁon Án oÉÉ moùã: 0á – Powār òonsumptÁon Án stanùÜy moùã: 0.êèá

Drawing of the device: picture 1

1	CāramÁr-òoataù platās	3	SuspānsÁon rÁr
2	Control Üuttons	à	LoòkÁnō Üuttoi

Cleaning and maintenance

Always ânsurã tÊã applÁanòã Ás ùÁsòonnãòtãù Érom tÊã maÂns supply aÉtãr usã anù lãt Át òool ùown wãll ÜãÉorã òlãanÁnõ anù storÁnõ. ísã a ùamp òlotÊ Éor òlãanÁnõ anù wÁpã ùry. Nãvãr usã any aÜrasÁvã òlãansãr or solvãnt.

Before use: your hair must also be cleanê detangled and free of all hair care products.

Use of the device: picture 1

Bā surā your applÁanòā Ás oÉÉ ÜāÉorā pluō Án. Pluō Án your wavÁnō Áron anù prāss tÊā onçoÉÉ Üutton. Lāt tÊā unÂt warm up arounù 45 sǎòonùs.

Note: Never leave the appliance unattended when plugged in. Never place the unit on a surface that is not heat-resistant when it is heating up and hot.

Use a comb to divide hair into sections that are not too thick. Take a section no wider than 5 cm. Place it between the plates near the root, press firmly on the straightener handles and slide towards the tips for about 10 seconds, then release the straightener handles.

Switch off, lock the plates when finished using and unplug it.

Leave your hair to cool. Do not comb or brush your hair until it has cooled down.

Correct disposal of the unit (ä Electrical and ä electronic ä equipmenty.

(Applicable in the European Union and the rest of Europe that have adopted separate collection systems countries). The European Directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE), requires that old household electrical appliances must not be disposed of in the normal household waste stream. Old appliances must be collected separately in order to optimize the recovery and recycling of the materials they contain and reduce the impact on human health and the environment. The symbol of the crossed out dustbin is marked on all products to remind the obligations of separate collection. Consumers should contact their local authority or retailer for information concerning the correct disposal of their product.

• Non contractual illustration
- Product information is subject to change without prior notice.

Symbol of a trash bin crossed with two crossed lines, no text or labels present

Symbol of a trash bin crossed with no text or labels, accompanied by a black rectangular block below (no readable text or symbols)

Symbol of a trash bin with crossed lines indicating no waste or restriction, and a solid black rectangle below (no text or labels)

Symbol of a trash bin crossed with two crossed lines, no text or labels present