4529 - Kettle Cloer - Free user manual and instructions
Find the device manual for free 4529 Cloer in PDF.
User questions about 4529 Cloer
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Kettle in PDF format for free! Find your manual 4529 - Cloer and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 4529 by Cloer.
USER MANUAL 4529 Cloer
natural_image
Two stainless steel water heaters with black handles, one emitting a white flame (no visible text or symbols)Cloer-4519
Cloer-4529

natural_image
Two black industrial kettles, Cloer-4510 and Cloer-4520, displayed against a white background (no text or symbols on the devices themselves)
natural_image
Two white water heaters with black handles, one labeled 'cloer-4521' (no other text or symbols visible)Cloer-4511
natural_image
Circular grayscale image showing bubbles and droplets in a liquid (no text or symbols)SPRACHEN - LANGUAGES
EN Operating Instructions....S. 6
natural_image
Exterior view of a modern building labeled 'cloer' with no visible text or symbols on the facade itself.
Cloer Online-Shop
https://cloer.de
Gewährleistung
Basic safety instructions
- The appliance is intended to be used in household only and using in:
– staff kitchen areas in shops, offices and other working environments,
– in farm houses,
– by clients in hotels, motels and other residential type environments, on bed and breakfast type environments.
- Have repairs of Cloer electronic appliances carried out only by authorized Cloer specialist dealers or by the Cloer customer service. Improper repairs can involve substantial dangers for the user. Furthermore, this will void your warranty claims.
- Only operate the appliance at household-usual power sockets. Check if the mains voltage stated on the type plate is up to that of your power supply network.
- If the supply cord is damaged, it must be replaced by Cloer, its service agent or similarly qualified persons in order to avoid a hazard.
- Pull power plug of the power socket
– in case of a defect,
- if the appliance is not used for a longer time,
– before any cleaning.
- Only pull at the plug, never at the feed cable.
- Do not stretch the feed cable over sharp edges and do not tighten it too tight, do not use it for carrying and protect it from heat (hotplate, for example).
- Do not tighten the feed cable too tight as otherwise the appliance is likely to tip over. Do not stretch the feed cable over sharp edges.
- This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
- Cleaning and user maintenance shall not be made by children unless they are older than 8 and supervised.
- Do not leave children unattended to ensure they do not play with the appliance.
- Keep the appliance and its cord out of reach of children less than 8 years.
- Do not immerse the appliance in water.
- Protect the appliance from humidity (splashing water or rain)
- Let the appliance cool off before cleaning or stowing away. More information about proper cleaning on the following pages
- Do not use the appliance outdoors.
- Do not immerse appliance or base in water and do not clean under running water.
- Use the product only to cook water. An improper use of the appliance may lead to serious injuries.
- ATTENTION: After use, the heating plate of the device will still give off residual heat, risk of burns!
- Do not fill the appliance over the MAX mark.
- Please avoid that water spills on the base station
- Please do not open the lid during the boiling process or immediately after it.
Technical Data
type volt hz watt
451/452 220-240 50 1850-2200
Before initial use

Read these operating instructions carefully before using the appliance for the first time
- Remove all packaging elements and labels, but not the rating plate.
- Place the electric kettle on a dry, even, non-slip surface.
- Shake out the water from the first boiling process.
Safety notices for use of the contact base / electric kettle

The appliance meets the requirements of the applicable EC directives.

The appliance is intended for in door use only.

CAUTION! The surface is hot during operation. Only touch the device at its handle.

Never operate the electric kettle without the lid closed and without lime filter, since then the device will not shut off automatically when the water boils.

ATTENTION! Always unplug appliance when not in use and before cleaning!
- Do not fill the electric kettle with water past the MAX marking. Scalding may result from water boiling over.
- Note: Make sure that the kettle is filled with water at least up to the MIN mark (0.5l) and at most up to the MAX mark (451X = 1l / 452X = 1.7l) on the water level indicator.
- Always remove the electric kettle from the contact base before filling with water.
- This electric kettle may only be used for heating water.
- Before operating the machine, make sure that the contact base is dry.
- Please make sure that water is never spilled on the contact base.
- If water is accidentally spilled onto the contact base, proceed as follows:
- Unplug the unit from the wall socket.
- Dry the contact base with an absorbent dry kitchen towel.
– Dry the surface beneath the contact base.
– Plug the unit into the wall socket again.
NOTE
Never operate the electric kettle without the lid closed and without lime filter, since then the device will not shut off automatically when the water boils.
Operation
- Plug the power plug into the wall socket.
- Remove the electric kettle from the contact base. Open the lid of the removable kettle by pressing the button to open the lid.
-
NOTE: For your safety, the lid is equipped with a locking device. If the electric kettle is accidentally overturned during use, the lid will not open. This reduces the risk of being scalded by spilled water.
-
Fill the electric kettle with water.
- Close the lid manually.
- MAKE SURE not to fill water past the maximum mar - king on the water level indicator.
- Place the electric kettle anywhere on the contact base. The unit is now ready for operation.
- To switch it on, press the ON/OFF switch on the bottom of the handle. The switch locks into place and the control lamp lights up.
- When the water boils, the electric kettle automatically -ly switches off and the control lamp goes out.
- You can interrupt the boiling process at any time by pushing up the ON/OFF switch.
- To pour the water, lift the electric kettle from the contact base.
- IMPORTANT: Always make sure that the device is switched off before removing the electric kettle from the contact base.
NOTE
The electric kettle has a silicone cover over the spout, which serves as protection from dust and splashes. This cover must not be removed and does not hinder the liquid from being poured out.
Overheating protection device
The electric kettle is equipped with a doubleaction overheating protection device. In the event that you accidentally operate the electric kettle without water or if the water level is too low, causing the water to evaporate during boiling, the device will automatically switch off for your safety. The device will be ready to operate once it has been filled with cold water.
Cleaning
- The appliance must not be immersed in water! Do not clean the electric kettle with heavily abrasive cleaners. They could scratch the appliance.
- Clean very dirty appliances either with lukewarm water or with a stainless steel cleaner.
- If a stainless steel cleaner is used, make sure that it is not aggressive and does not contain chlorine or acids.
- Regularly remove the scale filter from its mounting on the inside of the water kettle and clean it with a soft brush and some washing-up liquid. Then fit it back in the mounting.
Care
- Use a special stainless steel care product for minor cleaning (water stains, light fingerprints, etc.).

Use only for the exterior! Do not use on surfaces that come into contact with food. (inside)
EN
Decalcifying
- If you have hard water, the electric kettle should be decalcified regularly (depending on the hardness of the water, about every 2 - 3 weeks). Use a commercially available liquid decalcifying product (do not use chemical decalcifiers) and follow the manufacturer's instructions.
- Tip: Mild calcium deposits can also be removed with a mixture of 5 to 6 tablespoons of vinegar in 0.5 l of water.
Please observe the following when decalcifying the machine:
- First, pour cold water into the electric kettle (if the decalcifier foams excessively, use only 0.5 l of water).
- Briefly bring it to a boil.
- Now, add the decalcifier and let the device stand for a while.
- CAUTION: Do not bring this mixture to a boil. After decalcifying, rinse the pot twice with clear water.
- Do not clean the electric kettle with heavily abrasive cleaners. They could scratch the appliance. In the event of malfunctions due to calcium deposits, the guarantee will be voided!
NOTE
Regularly decalcifying your electric kettle will reduce the electricity used and prolong the life of the appliance. The calcium content of water varies from region to region. Please consult your local water works or utility works for information on water hardness.
Environmentally friendly disposal
We use only environmentally friendly packaging for the transport of our appliances. Please recycle cardboard/paper and plastic packaging appropriately.

CAUTION! Electrical appliances should not be disposed of with the household trash.
Electrical appliances contain valuable raw materials. When an appliance is worn-out, please take it to a recognised recycling facility. Please consult the local authorities for information on recycling appliances.
Customer service
In the event that your Cloer appliance becomes defective, please contact your Cloer dealer or Cloer customer service department. Cloer electrical appliances comply with current EC guidelines and safety regulations.
Manufacturer warranty
Please register your appliances in the period of 6 months since the purchase in order to benefit from our manufacturer warranty. The published conditions of warranty in the moment of the registration are valid. You will find conditions of warranty and product registration here:

Manufacturer warranty https://cloer.eu/guarantee
Type voltage hz watt
451/452 220-240 50 1850-2200
© 2024 by Cloer Germany GmbH&CoKG