B0F D641A X - Dishwasher BAUKNECHT - Free user manual and instructions

USER MANUAL B0F D641A X BAUKNECHT

1. On-Off/Reset button with indicator light
2. Program selection button with indicator light
3. Multizone button with indicator light / Key lock
4. Eco program indicator light
5. Key lock indicator light
6. Display
7. Program number and remaining time indicator
8. Tablet (Tab) indicator light

9. Closed water tap indicator light

10. Rinse Aid refill indicator light

11. Salt refill indicator light
12. Sani Rinse button with indicator light / Tablet (Tab)

13. Delay button with indicator light

14. Start/Pause button with indicator light / Drain out

FIRST TIME USE

FILLING THE SALT RESERVOIR

The use of salt prevents the formation of LIMESCALE on the dishes and on the machine's functional components.

- It is mandatory that the salt reservoir never be empty.

- It is important to set the water hardness.

The salt reservoir is located in the lower part of the dishwasher and must be filled when the SALT REFILL indicator light S in the control panel is lit.

1. Remove the lower rack and unscrew the reservoir cap (anticlockwise).

2. Only the first time you do this: fill the salt reservoir with water.

3. Position the funnel (see figure) and fill the salt reservoir right up to its edge (approximately 1 kg); it is not unusual for a little water to leak out.

4. Remove the funnel and wipe any salt residue away from the opening.

Make sure the cap is screwed on tightly, so that no detergent can get into the container during the wash program (this could damage the water softener beyond repair).

Whenever you need to add salt, it is mandatory to complete the procedure before the beginning of the washing cycle to avoid corrosion.

FILLING THE RINSE AID DISPENSER

Rinse aid makes dish DRYING easier. The rinse aid dispenser A should be filled when the RINSE AID REFILL indicator light ✗ in the control panel is lit.

NEVER pour the rinse aid directly into the appliance tub.

FILLING THE DETERGENT DISPENSER

To open the detergent dispenser use the opening device C. Introduce the detergent into the dry dispenser D only. Place the amount of detergent for pre-washing directly inside the tub.

If all-in-one detergents are used, we recommend using the TABLET button, because it adjusts the program so that the best washing and drying results are always achieved.

Usage of detergent not designed for dishwashers may cause malfunction or damage to the appliance.

WATER SOFTENING SYSTEM

Water softener automatically reduces water hardness, consequently preventing scale buildup on heater, contributing also to better cleaning efficiency. This system regenerates itself with salt, therefore it is required to refill salt container when empty.

Frequency of regeneration depends on water hardness level setting - regeneration takes place once per 6 Eco cycles with water hardness level set to 3.

Regeneration process starts in final rinse and finishes in drying phase, before cycle ends.

• Single regeneration consumes: 3.5L of water;
  • Takes up to 5 additional minutes for the cycle;
  • Consumes below 0.005kWh of energy.

PROGRAMS TABLE

Program	Programs description	Drying phase	ActiveDry	Available options *)	Duration of wash program (h:min)**	Water consumption (litres/cycle)	Energy consumption (kWh/cycle)
1.	Eco 50°- Program is suitable to clean normally soiled tableware, that for this use, it is the most efficient programme in terms of its combined energy and water consumption, and that it is used to assess compliance with the EU Ecodesign legislation.	√	√		3:10	9.5	0.75
2.		Sensor 50°-60° - For normally soiled dishes with dried food residues. Senses the level of soiling on the dishes and adjusts the program accordingly.	√	√	MULTI ZONE	1:25 - 3:00	7.0 - 14.0	0.90 - 1.40
3.		Intensive 65° - Program recommended for heavily soiled crockery, especially suitable for pans and saucepans.	√	√	MULTI ZONE	2:50	17.0	1.60
4.		Fast Wash&Dry 50° - Normally soiled crockery. Everyday cycle, that ensures optimal cleaning and drying performance in shorter time.	√	√	MULTI ZONE	1:25	11.5	1.10
5.		Glass 45° - Program for delicate items, which are more sensitive to high temperatures, for example glasses and cups.	√	√	MULTI ZONE	1:40	12.0	1.20
6.		Rapid 30' 50° - Program to be used for half load of lightly-soiled dishes with no dried food residues. Without drying.	-	√	MULTI ZONE	0:30	9.0	0.50
7.		Silent 50° - Suitable for night-time operation of the appliance. With the lowest noise.	√	√		3:30	16.0	1.15
8.		Prewash - Use to refresh crockery planned to be washed later. No detergent to be used with this program.	-	-	MULTI ZONE	0:12	4.5	0.01

ECO program data is measured under laboratory conditions according to European Standard EN 60436:2020.

Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following address: [e-mail] Pre-treatment of the dishes is not needed before any of the programs.

*) Not all options can be used simultaneously.

**) Values given for programs other than the program Eco are indicative only. The actual time may vary depending on many factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of load, load balancing, additional selected options and sensor calibration. The sensor calibration can increase program duration up to 20 min.

OPTIONS AND FUNCTIONS

Please scan the QR code on your product in order to have more detailed information.

OPTIONS can be selected directly by pressing the corresponding button (see CONTROL PANEL). If an option is not compatible with the selected program (see PROGRAMS TABLE), the corresponding LED flashes rapidly 3 times and beeps will sound. The option will not be enabled.

MULTI ZONE MULTIZONE - If there are not many dishes to be washed, a half loading may be used in order to save water, electricity and detergent. By default the appliance washes dishes in all racks.

KEYLOCK - A long press (for 3 seconds) of MULTIZONE button, will activate the KEYLOCK function. To deactivate the KEYLOCK, long press again.

SANI RINSE - This option can be used to sanitize washed dishes. It will increase final rinse temperature and add antibacterial wash to the selected program. WARNING: the crockery and plates could be extremely hot at the end of the cycle.

TABLET (Tab)- If you use powder or liquid detergent, this option should be off.

DELAY -The start of the program may be delayed for a period of time between 0:30 and 24 hours.

The DELAY function cannot be set once a wash cycle has been started.

ActiveDry is a convection drying system which automatically opens the door during/after drying phase to ensure exceptional drying performance every day. Door opens at the temperature that is safe to your kitchen furniture, thus door will not be opened when the option of SANI RINSE is on.

LOADING THE RACKS

CAPACITY: 14 standard place-settings

CUTLERY RACK

Interior view of a metal tray containing various electronic components and modules (no visible text or symbols)

(loading example for the cutlery rack) The third rack was designed to house the cutlery.

UPPER RACK

Cross-sectional diagram of a multi-level kitchen or dining area with no visible text or symbols

(loading example for the upper rack) Load delicate and light dishes: glasses, cups, saucers, low salad bowls.

FOLDABLE FLAPS WITH ADJUSTABLE POSITION

LOWER RACK

Cross-sectional diagram of a shopping basket with coins and a tray (no text or labels)

(loading example for the lower rack)

For pots, lids, plates, salad bowls, cutlery etc. Large plates and lids should ideally be placed at the sides to avoid interferences with the spray arm.

The lower rack has tip-up supports which can be used in a vertical position when arranging plates or in a horizontal position (lower) to load pans and salad bowls easily.

Illustration of a hand placing a grid into a wireframe crate (no text or symbols)

CUTLERY BASKET

It is fitted with top grids for improved cutlery arrangement. It must only be positioned at the front of the lower rack.

Knives and other utensils with sharp edges must be placed in the cutlery basket with the points facing downwards or they must be positioned horizontally in the tip-up compartments on the upper rack.

GLASS CARE

Dedicated accessory that allows you to safely store different types of stem glasses in the lower rack.

It enables cleaning & drying results by allowing an optimised and stable positioning of the glasses.

CLEANING AND MAINTENANCE

More information in the Daily Reference Guide on website.

CLEANING THE FILTER ASSEMBLY CLEANING THE SPRAY ARMS

3

Medical illustration of a surgical procedure with instruments and tubing (no text or labels)

Technical line drawing of a mechanical assembly with no visible text or symbols

To remove the upper spray arm, turn the plastic locking ring in a clockwise direction.

Diagram of a hand operating a mechanical device with an upward arrow, no text or symbols present

The lower spray arm may be removed by pulling it upwards.

In case you find foreign objects (such as broken glass, porcelain, bones, fruit seeds etc.) please remove them carefully.

NEVER REMOVE the wash-cycle pump protection (black detail) (Fig 4).

TROUBLESHOOTING

Please scan the QR code on your product in order to have more detailed information.

In case your dishwasher doesn't work properly, check if the problem can be solved by going through the following list. For other errors or issues please contact authorized After-sales Service which contact details can be found in the warranty booklet. Spare parts will be available for a period of either up to 7 or up to 10 years, according to the specific Regulation requirements.

PROBLEMS POSSIBLE CAUSES SOLUTIONS
The dishwasher does not fill the water. Display shows: and F6, both On/Off and START/Pause LEDs are blinking rapidly.	No water in the water supply or the tap is closed.	Make sure there is water in the water supply or the tap running.
	The inlet hose is bent.	Make sure the inlet hose is not bent (see INSTALLATION) reprogram the dishwasher and reboot.
	The sieve in the water inlet hose is clogged; it is necessary to clean it.	After having carried out the verification and cleaning, turn off and turn on the dishwasher and restart a new program.
Dishwasher finishes the cycle prematurely. Display shows: F15 and both On/Off and START/Pause LEDs are blinking rapidly.	Drain hose positioned too low or siphoning into home sewage system.	Check if end of drain hose is placed at correct height (see INSTALLATION).Check for siphoning into home sewage system, install air admittance valve if necessary.
	Air in water supply. Check water supply for leaks or other issues letting air inside.

Policies, standard documentation, ordering of spare parts and additional product information can be found by:

• Using QR code on your product.

- Visiting our website docs.bauknecht.eu and parts-selfservice.whirlpool.com

- Alternatively, contact our After-sales Service (See phone number in the warranty booklet). When contacting our After-sales Service, please state the codes provided on your product's identification plate.

The model information can be retrieved using the QR-Code indicated on the energy label. The label also includes the model identifier that can be used to consult the https://eprel.ec.europa.eu database portal.

Wingful Bottle coefficient 0.15 0.25 0.35 0.45 0.55 0.65 0.75 0.85 0.95 1.05 1.15 1.25 1.35 1.45 1.55 1.65 1.75 1.85 1.95 2.05 2.15 2.25 2.35 2.45 2.55 2.65 2.75 2.85 2.95 3.05 3.15 3.25 3.35 3.45 3.55 3.65 3.75 3.85 3.95 4.05 4.15 4.25 4.35 4.45 4.55 4.65 4.75 4.85 4.95 5.05 5.15 5.25 5.35 5.45 5.55 5.65 5.75 5.85 5.95 6.05 6.15 6.25 6.35 6.45 6.55 6.65 6.75 6.85 6.95 7.05 7.15 7.25 7.35 7.45 7.55 7.65 7.75 7.85 7.95 8.05 8.15 8.25 8.35 8.45 8.55 8.65 8.75 8.85 8.95 9.05 9.15 9.25 9.35 9.45 9.55 9.65 9.75 9.85 9.95 10.05

DANKE, DASS SIE SICH FÜR EIN BAUKNECHT PRODUKT

Interior view of a large industrial or warehouse space with grid-like structures and no visible text or symbols.

Cross-sectional diagram of a multi-compartment kitchen or storage unit (no text or labels visible)

Cross-sectional diagram of a kitchen appliance showing dish arrangement and interior components (no text or labels)

Line drawing of a hand placing a patterned object into a wireframe basket (no text or symbols)

Diagram of a mechanical assembly with a hand holding a tool, showing internal components and motion direction (no text or labels)

Illustration of a hand using a tool to press or install a mechanical component on a base (no text or symbols visible)

Wingled Reset condition 2000000000 1.50x 3.50x

MERCI D'AVOIR CHOISI UN PRODUIT BAUKNECHT.

OPTIONS ET FONCTIONS

Black-and-white photo of a mechanical component with grid pattern and internal structures (no visible text or symbols)

Cross-sectional diagram of a mechanical or electronic device with multiple components and no visible text or symbols

Interior view of a shopping basket with cutouts and circular items (no text or symbols visible)

Line drawing of a hand placing a metal object into a woven basket (no text or symbols)

PANIER À COUVERT

Diagram of a medical procedure showing a surgical tool interacting with internal organs (no text or labels)

Technical line drawing of a structural framework with hand holding a tool, no visible text or symbols

Illustration of a hand using a tool to press or install a mechanical component on a baseplate (no text or symbols visible)

Interior view of a mechanical or electrical enclosure with grid patterns and cylindrical components (no visible text or symbols)

Cross-sectional diagram of a mechanical assembly with gears and housing (no text or labels)

Cross-sectional diagram of a kitchen appliance showing internal compartments and fixtures (no text or labels)

Diagram of a medical or laboratory procedure showing tissue and components (no text or labels)

Diagram of a mechanical device with rotating components and a hand holding a tool (no text or symbols)

Illustration of a hand operating a mechanical device with a handle and lever (no text or symbols)

Wired Heat and 100% Temperature: 25°C Pressure: 1000V Balance: 500g Balance: 100g Balance: 150g Balance: 200g Balance: 250g Balance: 300g Balance: 350g Balance: 400g Balance: 450g Balance: 500g Balance: 550g Balance: 600g Balance: 650g Balance: 700g Balance: 750g Balance: 800g Balance: 850g Balance: 900g Balance: 950g Balance: 1000g

400011722047

02/2024 as - Xerox Fabriano