Snappy Slim - USB hub Speed-Link - Free user manual and instructions

Product Type	USB Hub
Brand	Speed-Link
Model	Snappy Slim
Usage	Indoor, dry locations
Power Supply	USB bus (self-powered)
Number of Ports	4 USB ports
Compatibility	PC, computer
Maintenance	No maintenance required
Safety	Do not open, do not use if damaged
Dimensions (approx.)	10 x 3 x 1 cm
Weight (approx.)	50 g
Material	Plastic
Color	Black
Technical Support	www.speedlink.com/support
Disposal	Do not dispose of in household waste, take to a recycling center

Frequently Asked Questions - Snappy Slim Speed-Link

How to connect the Snappy Slim USB hub?

Plug the hub into a free USB port on your computer. The operating system will detect it automatically.

Does the hub require external power?

No, the hub is self-powered via the computer's USB port. Make sure the computer provides enough power.

How many USB ports does the hub have?

The Snappy Slim hub has 4 USB ports.

Can I use the hub with a smartphone or tablet?

The hub is designed for use with a computer. Use with a smartphone may not be supported.

What to do if the hub is not recognized?

Check the USB connection, try another port, and restart the computer. If the problem persists, contact technical support.

How to clean the hub?

The hub requires no maintenance. If necessary, wipe it with a dry cloth. Do not use liquid products.

Can I open the hub to repair it?

No, do not open the hub. This voids the warranty and may be dangerous. Contact technical support if there is a problem.

How to dispose of the hub at the end of its life?

Do not throw the hub in household waste. Dispose of it at an official collection point or recycling center in accordance with regulations.

Is the hub compatible with Windows and macOS?

Yes, the hub is compatible with Windows and macOS operating systems. No additional drivers are usually needed.

Where can I find the full manual?

The manual is available free as a PDF on notice-facile.com or on the manufacturer's website.

USER MANUAL Snappy Slim Speed-Link

SNAPPY

USB HUBUS

EN

INTENDED USE

This product is intended to be used as a USB hub for connecting to a computer and is for indoor home/office use only. It contains no user-serviceable parts. Do not disassemble it and stop using it immediately if damaged. Jöllenbeck GmbH accepts no liability whatsoever for any damage to this product or injuries caused due to careless or improper use or for purposes for which it is not intended.

DISPOSAL INFORMATION

This symbol means that you must not dispose of this product together with household waste. Always store and dispose of old equipment or batteries correctly as they can harm the environment or cause injury because they may contain hazardous substances; failure to do so may result in fines. In the EU, you can dispose of your old equipment or batteries free of charge at an official recycling point: you are required to do so by law, it ensures your device or battery is recycled and you do your bit to help protect the environment. For information please contact your local authority, civic amenity site or retailer. Major EU retailers (electronics retailers with a sales area of ≥ 400m² ) take back small appliances (all dimensions < 25cm) free of charge; others do so only if you purchase products of a similar value. If possible, remove any batteries.

CONFORMITY NOTICE

Operation of the device (the devices) may be affected by strong static, electrical or high-frequency fields (radio installations, mobile telephones, microwaves, electrostatic discharges). If this occurs, try increasing the distance from the devices causing the interference.

FCC STATEMENT

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note: Modifications to this product will void the user's authority to operate this equipment.

TECHNICAL SUPPORT

www.speedlink.com/support

Please keep this information for later reference.

DE

INDICATION DE CONFORMITÉ

VERWERKING VAN AFVAL

INFORMACE O KONFORMITĚ

NO

TEKNISK SUPPORT

www.speedlink.com/support

SL

NÕUETEKOHANE KASUTAMINE

Having technical problems with this product? Get in touch with our Support team – the quickest way is via our website: www.speedlink.com

DE

© 2018 Jöllenbeck GmbH. All rights reserved. SPEEDLINK, the SPEEDLINK word mark and the SPEEDLINK swoosh are registered trademarks of Jöllenbeck GmbH. All trademarks are the property of their respective owner. Jöllenbeck GmbH shall not be made liable for any errors that may appear in this manual. Information contained herein is subject to change without prior notice. Please keep this information for later reference. JÖLLENBECK GmbH, Kreuzberg 2, 27404 Weertzen, GERMANY