CT-3001/CCPBT - Hand tool Panduit - Free user manual and instructions

Product Type	Hand crimping and cutting tool
Brand	Panduit
Model	CT-3001/CCPBT
Dimensions (approx.)	23 cm x 6 cm x 3 cm
Weight	0.5 kg
Main material	Hardened steel and rubber-covered handles
Power supply	None (manual tool)
Main functions	Crimping connectors, cutting and stripping wires
Crimping capacity	Wire gauge AWG 22 to 10
Mechanism	Cam mechanism with locking ratchet
Ergonomics	Non-slip handles with rubber coating
Maintenance and cleaning	Clean with a dry cloth; lubricate joints with light oil
Safety	Wear safety glasses; do not use on live circuits
Spare parts and repairability	Replaceable crimping jaws and cutting blades
Warranty	1 year (parts and labor)
Intended use	Indoor electrical and telecom applications

Frequently Asked Questions - CT-3001/CCPBT Panduit

What types of connectors can be crimped with the Panduit CT-3001/CCPBT?

This tool can crimp connectors compatible with wire gauge AWG 22 to 10, including RJ connectors, terminals, and splices.

How to adjust the crimping force?

The CT-3001/CCPBT has an adjustable ratchet mechanism. Turn the wheel on the side to change the pressure; refer to the manual for precise adjustments according to the connector type.

Can I strip wires with this tool?

Yes, it includes a stripping function for AWG 22 to 10 wires. Place the wire in the appropriate notch, squeeze, and remove the insulation by twisting slightly.

How to maintain the tool?

Clean the jaws regularly with a dry cloth and apply a drop of light oil to the joints. Store in a dry place to prevent rust.

What to do if the ratchet no longer engages?

Check that the pressure adjustment screws are not loose and that the jaws are not obstructed. If the problem persists, contact Panduit customer service.

Where can I buy replacement jaws?

Spare parts are available from authorized Panduit dealers or on the official website. Use part number CT-3001/CCPBT-DIE for the jaws.

Is the tool suitable for stranded wires?

Yes, it works perfectly with stranded and solid wires. Make sure the wire is fully inserted into the crimping slot before squeezing the handle.

What safety measures should I follow?

Always wear safety glasses to avoid splashes. Never work on live circuits; always disconnect power before use.

How to know if the crimp is correct?

A correct crimp shows a clean impression without excessive crushing. You can perform a pull test: the wire should not come off the terminal.

Is there a warranty on this tool?

Panduit offers a one-year warranty against manufacturing defects. Keep your proof of purchase to claim the warranty.

USER MANUAL CT-3001/CCPBT Panduit

infrastructure for a connected world

Black Fin

CT-3001/CCPBT

Instruction Manual

Serialnumber

Pic. similar

HE.20212_B © 11/2021 R&D-2

Close-up of mechanical components, possibly a motor or tool, shown in two circular views (no text or symbols visible)

Close-up of mechanical components with no visible text or symbols

Panduit Unite LLP West World, West Gale, London, W5 10D

CT-3001/CCPBT

infrastructure for a connected world

AUTO QUICK STOP MAN IPS SERVICE ELECTRONIC PDF OLED 18V Li-Ion Energy Save easy 2K REAL TIME LED 2 years Warranty ACHTUNG Bal Beschäft ATTENTION Warranty seal is broken into or Warranty For US and Canada only FCC ID: RBR-S50 • IC: 4957A-S50 Model: CRM The devices comples with Part 1B of the FCC Rules and with Industry Canada Inense-exempt: RBSI standard(s) Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation H3R055 batch# e.g. 304711 datecode e.g. X = 2027; N = Jan. consecutive# e.g. „142“ = tool # 142 Kiauke Auf dem Knapp 48 × D-42855 Remscheid

Bluetooth®

The Bluetooth ^® word mark and Bluetooth ^® symbol are registered trademarks of Bluetooth SIG, Inc. and any use by Panduit is licensed.

datecode

For US and Canada only

FCC ID: RRR-S50 • IC: 4957A-S50Model: CFM

This device complies with Part1S of the FCC Rules and with Industry Canada is reeseverent; RSS standard(s).Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation

batch# e.g. 304711

datecode e.g. X = 2027; N = Jan.

consecutive# e.g. „142“ = tool # 142

MILK100000

2014-03-2014

Pic. similar / Intended Use

HE.20212_B © 11/2021 I

WORK SERVICE DON'T DO DON'T DO General safety rules

CT-3001/CCPBT

infrastructure for a connected world

18,7" 475mm 8,5" 217mm 3,4" 86mm 3 1 4,6" 110mm 3,7" 94mm 3" 75mm 1,6" 41mm PANDUIT ST-00103907 METER OF 7x7 DIN: 3.0V/10" FLOW 2.7" TO 0.00M LAMPIONE 2.5kW / 4.0kW / 0.00M LISTED TOOL TOOL 80103907 UK CA 3 3 2 2 PANDUIT 6,6 lbs 3,0 kg VIBR <70dB <2,5m/s² BiO +104°F +40°C +14°F -10°C 6.7 Tch (60 kN)

WARNING

Read all safety warnings, instructions, illustrations and specifications provided with this power tool.

Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference.

CT-3001/CCPBT comes with this instruction booklet and

QTY Item

QTY Item

1 Carrying Case 2 Li-ion Makita Batteries
1 Cut, Crimp and Punch Tool 1 Die Adapter (UAW)
1 Battery Charger 1 Safety Booklet

CT-3001/CCPBT

infrastructure for a connected world

Use tool only with 18 V Makita battery

Takita® BL1840 18V= 4.0Ah 72Wh Li-ion ★

Takita® Li-ion BL1830 18V = 3.0Ah 54Wh Li-ion Ni No Moist Corporation AND COOKING Made in Japan

BL1840(B) 36 CT-LIBCMK4AH BL1830(B) 22 CT-LIBCMK3AH

10 - 40°C

Pic. similar / Intended Use HE.20212_B © 11/2021 III

WORK SERVICE DON'T DO DON'T DO General safety rules

< 360° ✓ > 360° Authorised Service Center STOP

DON'T DO Z210

1. 2. 3. 1. 2. 3.

30% max.

LED on/off RESS LED

Pic. similar / Intended Use HE.20212_B © 11/2021 IV

WORK SERVICE DON'T DO DON'T DO General safety rules

1. 2.

3D mechanical component with orange rotation arrows indicating rotational motion (no text or symbols)

Mechanical assembly diagram showing a robotic arm with rotational motion arrows (no text or symbols)

Technical diagram of a mechanical clamp or bracket assembly with labeled parts 1 and 2, showing internal components and mounting points.

PANDUIT CD-3001/ST-DA or PANDUIT KC22-600B A422 A422 CLICK

Mechanical assembly diagram showing a clamping tool with U422 and U422 features, no readable text or symbols present.

Pic. similar / Intended Use HE.20212_B © 11/2021 V

WORK SERVICE DON'T DO DON'T DO General safety rules

3D mechanical component with labeled ports and mounting holes (no readable text or symbols)

Illustration showing a hand holding a handheld device with warning symbols indicating 'No' and 'Yes' signs.

Mechanical tool with clamping device and mechanical component, showing a press operation (no text or symbols)

Mechanical assembly diagram showing a pipe clamp with two views of the clamp (no text or symbols present)

1.2.3. 1.2.3.

Pic. similar / Intended Use HE.20212_B © 11/2021 VI

WORK SERVICE DON'T DO DON'T DO General safety rules

CT-3001/CCPBT

infrastructure for a connected world

UA6P see ④ 2. 1.

3D mechanical assembly with a highlighted cylindrical component and an inset close-up of a mechanical component (no text or symbols visible)

UCM... see ② 2. M5 UCM5 M6 UCM6 M8 UCM8 M10 UCM10 M12 UCM12 1/4" UCUNC14 1/2" UCUNC12 3/8" UCUNC38

UC... see 1 3 5 UAM UAM CLICK

UAM + UC40 UAM

UC40

1

UANA CLICK

UC40

2

Pic. similar / Intended Use HE.20212_B © 11/2021 VI

WORK SERVICE DON'T DO DON'T DO General safety rules

CT-3001/CCPBT

PANDUIT™
infrastructure for a connected world

UC40

2

UC40

1

CLICK UC40

1

2

CLICK

UAM + UC40 #1 #2

UAM + UCACSR

UAW UAW PANDUIT

UAN RD CD-2001

Pic. similar / Intended Use
HE.20212_B © 11/2021 VIII

WORK SERVICE DON'T DO

General safety rules

CT-3001/CCPBT

infrastructure for a connected world

UC26 UC25 ①UC26 Cu/Al < Ø 1" (26 mm) NYY/NAYY

②UCM10 M5 M6 M8 M10 M12 1/4" 1/2" 3/8"

③UC40 Cu/Al < Ø 1.57" (40 mm) NYY/NAYY

Two 3D mechanical components: a cylindrical motor and a rectangular block, with an inset showing a close-up of a mechanical component (no text or symbols visible)

⑤UCACSR max. Ø 1.57" (40 mm) ACSR

3D mechanical assembly diagram showing three components with no visible text or symbols

Pic. similar / Intended Use HE.20212_B © 11/2021 IX

WORK SERVICE DON'T DO DON'T DO General safety rules

UCM5

UCM6

UCM8

UCM1C

UCM12

UCUNC

UCUNC

CT-3001/CCPBT

PANDUIT™
infrastructure for a connected world

UCACSR

1 # 2

UC40

1 # 2

UC40

Technical diagram showing mechanical component with labeled parts and checkmark indicators

MAN MA12 PRESS

QUICK STOP U622 QUICK STOP

Pic. similar / Intended Use HE.20212_B © 11/2021 X

WORK SERVICE DON'T DO DON'T DO General safety rules

CT-3001/CCPBT

PANDUIT™
infrastructure for a connected world

MRS+ ← t_r t_r > t_r t_r < t_r PRES S setreset t

Pic. similar / Intended Use HE.20212_B © 11/2021 XI

CT-3001/CCPBT

infrastructure for a connected world

1 2 PANQUIT ERROR CODE: ***** Error code *1 3a BT P 3 bar P 3 bar Bluetooth (if connected) Battery charging level Current pressure Pressure max. *2 3b bar / psi to change: bar / psi 3c bar / psi 3b kN / 1! to change: kN / lbf 3d BT F 74 lbf F 369lbf

4a	USER 3: RD3 Doppelklick	Doubleclick
4b 3 sec.	USER SELECT: RD3 Einfachklick	Singleclick enter menue
4c	USER SELECT: RD3 Doppelklick	Doubeldick select
4d	USER SELECT: RD3 Doppelklick	Doubeldick confirmed
5	NEXT SERVICE: 9826 OPs	Cycles (until next service)
6	TOTAL: t = 0.07 h Q = 214.2 Ah n = 174	Since manufacturing: operating hours Capacity # crimps
7	RETURN

*1 Error codes:
1 Overcurrent fuse
2 Overcurrent comparator
3 Overheat board
4 Overheat battery
5 Battery empty, operation stop
6 Faulty crimp
motor in operation
7 Faulty crimp
motor net in operation
8 Low battery
9. Battery empty
0. RTC battery low
11. Tool deactivated
12. Service necessary
2. RTC on found
3 RTC not found 4 BT unit not four
4. By Unit Not Usual 6. Procedure scope
6 Pressure sensor not found 7. Rurg pressure exsended
7. Burst pressure exceeded 8. Battery temperature too
8 Battery temperature too low

1 Überstrom durch

Überstromsicherung

WORK SERVICE DON'T DO DON'T DO General safety rules

CT-3001/CCPBT

infrastructure for a connected world

Tool Link App

Klauke GmbH

Changes or modifications made to this equipment not expressly approved by Klauke may void the FCC authorization to operate this equipment.

BEFORE WORK DIN EN 50110

graph TD
    A["1. OTL"] --> B["2. Handbag"]
    B --> C["3. PANDUIT"]
    C --> D["BlackFin PANDUIT"]

Authorised Service Center

OLD PART REPLACEMENT SAFETY NEW ✓ 2 years Warranty World wide Tool Service SERVICE AIR 2 years Warranty World wide Tool Service SERVICE AIR + 3 years Warranty PANDUIT 3 years or 10.000 operations Authorised Service Center Tool warranty 5 years

WEEE 2012/19/EU [e-mail]

PAYOUT once a year Recommendation Empfehlung Authorised Service Center

CT-3001/CCPBT

infrastructure for a connected world

			Wann/When/Quand/Quando/cuándo/Wanneer/Kогда/это происходит/Kiedy/quando	Warum/Why/Pourqoui/Porqué/?por qué?/Waarom/Причина/Dlaczego/Perché
			nach Arbeitsvorgang after working cycle après opération de travailDespués del proceso de trabajo após o processo de trabalho na bedrijfscyclusпосле цикла опрессовки po zakończeniu pracy dopo il processo di lavoro
			nach Arbeitsvorgang after working cycle après opération de travailDespués del proceso de trabajo após o processo de trabalho na bedrijfscyclusпосле цикла опрессовки po zakończeniu pracy dopo il processo di lavoro
			während der Übertemperatur while exceeding the temp. limit pendant surchauff e en caso de temperatura excesiva durante a temperatura excessiva tijdens te hoge temperatuur при высокой температуре внутри корпуса przy przegrzaniu superando il limite di temperatura	Werkzeug zu heißUnit too hot outil surchauff éHerramienta demasiado caliente ferramenta demasiado quente gereedschap te heetПереррев инструмента urządzenie za gorąceUtensile troppo caldo

D GBFENLP RUS PLID GBFENLP

Authorised Service Center

https://www.klauke.com/de/en/service-centre-and-repairs

Pic. similar / Intended Use HE.20212_B © 11/2021 XV

WORK SERVICE DON'T DO DON'T DO General safety rules

CT-3001/CCPBT

infrastructure for a connected world

			Wann/When/Quand/Quando/cuándo/Wanneer/Kогда/это происходит/Kiedy/quando	Warum/Why/Pourqoui/Porquê/?por qué?/Waarom/Причина/Dlaczego/Perché
	1 x 1 x		nach Arbeitsvorgang after working cycle après opération de travail Después del proceso de trabajo após o processo de trabalho na bedrijfscyclus после цикла опрессовки po zakończeniu pracy dopo il processo di lavoro	Fehler: der notwendige Pressdruck wurde nicht erreicht. Es handelt sich um eine manuelle Unterbrechung der Pressung bei stehendem Motor.Error: the required pressure has not been reached. The operator has interrupted the pressing cycle manually while the motor was not running.ERREUR: Pression nécessaire pas atteinte. Il s'agit d'une interruption manuelle de la sertissage au moteur arrêté.Error: No se ha alcanzado la presión necesaria o el operador ha interrumpido el ciclo a mano mientras el motor ha parado.Falha: a pressão de prensagem necessária não foi alcançada. Trata-se de uma interrupção manual da prensagem com o motor parado.Foutmelding: De benodigde persdruk wordt niet bereikt. De gebruiker heeft de verkrimping handmatig stopgezet aangezien de motor niet actief is.Ошибка: не было достигнуто требуемое усилие опрессовки или оператор прервал процесс опрессовки вручную, когда двигатель остановился.Błąd: konieczne ciśnienie nie zostało osiągnięte. Użytkownik przerwał cykl pracy ręcznie w chwili, gdy silnik nie był włączonyErrore: la pressione richiesta non è stata raggiunta. L'operatore ha interrotto manualmente il ciclo di pressatura mentre il motore non è in funzione.
			nach Arbeitsvorgang after working cycle après opération de travail Después del proceso de trabajo após o processo de trabalho na bedrijfscyclus после цикла опрессовки po zakończeniu pracy dopo il processo di lavoro	Schwerwiegender Fehler: Pressdruck wurde bei laufendem Motor nicht erreicht.Serious Error: The pressure has not been reached while the motor was running.Erreur Grave: Pression pas atteinte au moteur courant.Error grave: No se ha alcanzado presión mientras el motor estaba en marchaFalha grave: a pressão de prensagem não foi alcançada com o motor em funcionamento.Urgente foutmelding: De persdruk werd bij een werkende motor niet bereikt.Серьезная ошибка: не было достигнуто требуемое усилие опрессовки во время работы двигателяPoważny błąd: konieczne cisnienie nie zostało osiągnięte podczas pracy silnikaErrore grave: la pressione non è stata raggiunta mentre il motore è in funzione.

Pic. similar / Intended Use

HE.20212_B © 11/2021

XVI

Declaration of conformity CT-3001/CCPBT

(D) CE-21 - Konformitätserklärung. Wir erklären in alleiniger Verantwortlichkeit, daß dieses Produkt mit den folgenden Normen oder normativen Dokumenten überinstimmt: EN 62841-1, EN ISO 12100, EN ISO 13857, EN ISO 13854, EN 28662-1, EN 61000-6-3, EN 61000-6-2, EN 60529, EN 1037 gemäß den Bestimmungen der Richtlinien 2006/42/EG, 2014/30/EU, 2011/65/EU
(GB) CE-'21 - Declaration of conformity. We declare under our sole responsibility that this product is in conformity with the following standards or normative documents: EN 62841-1, EN ISO 12100, EN ISO 13857, EN ISO 13854, EN 28662-1, EN 61000-6-3, EN 61000-6-2, EN 60529, EN 1037 in accordance with the regulations of directives 2006/42/EG, 2014/30/EU, 2011/65/EU
(F) CE-21 - Déclaration de conformité. Nous déclarons sous notre seule reponsabilité que ce produit est en conformité avec les normes ou documents normatifs suivants: EN 62841-1, EN ISO 12100, EN ISO 13857, EN ISO 13854, EN 28662-1, EN 61000-6-3, EN 61000-6-2, EN 60529, EN 1037 conformément aux réglementations des directives 2006/42/EG, 2014/30/EU, 2011/65/EU
(E) CE-'21 - Declaración de conformidad. Declaramos bajo nuestra sola responsabilidad que este producto está en conformidad con las normas o documentos normativos siguientes: EN 62841-1, EN ISO 12100, EN ISO 13857, EN ISO 13854, EN 28662-1, EN 61000-6-3, EN 61000-6-2, EN 60529, EN 1037 de acuerdo con las regulaciones de las directivas 2006/42/EG, 2014/30/EU, 2011/65/EU
(I) CE-'21 - Dichiarazione di conformità. Dichiariamo sotto la nostra esclusiva responsabilità che questo prodotto è conforme alle seguenti norme e documenti normativi: EN 62841-1, EN ISO 12100, EN ISO 13857, EN ISO 13854, EN 28662-1, EN 61000-6-3, EN 61000-6-2, EN 60529, EN 1037 conformemente alle disposizioni delle direttive 2006/42/EG, 2014/30/EU, 2011/65/EU
(P) CE-'21 - Declaração de conformidade. Declaramos sob nossa exclusiva responsabilidade que este producto cumpre as seguintes normas ou documentos normativos: EN 62841-1, EN ISO 12100, EN ISO 13857, EN ISO 13854, EN 28662-1, EN 61000-6-3, EN 61000-6-2, EN 60529, EN 1037 conforme as disposições das direcivas 2006/42/EG, 2014/30/EU, 2011/65/EU
(NL) CE-'21 - Konformileitsverklaring. Wij verklaren en wij stellen ons er alleen voor verantwoordelijk dat dit produkt voldoot aan de volgende normen of normatieve documenten: EN 62841-1, EN ISO 12100, EN ISO 13857, EN ISO 13854, EN 28662-1, EN 61000-6-3, EN 61000-6-2, EN 60529, EN 1037 overeenkomstig de bepalingen van de richtlijnen 2006/42/EG, 2014/30/EU, 2011/65/EU
(GR) CE-21 - ΔΙΑΛΩΣΙΙ ΣΥΜΜΟΡΦΩΣΙΠΣ Με αναλψη συνολικης δηλωμοε τοτο πορον προσον συμφωνει με τα παρακατω ποστητα και με τα ηροτημα η σχετκο εγγραφα EN 62841-1, EN ISO 12100, EN ISO 13857, EN ISO 13854, EN 28662-1, EN 61000-6-3, EN 61000-6-2, EN 60529, EN 1037 συμφωνει με τοχς κούνουσμονς 2006/42/EG, 2014/30/EU, 2011/65/EU
(S) CE-'21 - Konformitetsdeklaration. Vi förklarar på eget ansvar att denna produkt överenstämmer med följande normaler eller normativa dokument: EN 62841-1, EN ISO 12100, EN ISO 13857, EN ISO 13854, EN 28662-1, EN 61000-6-3, EN 61000-6-2, EN 60529, EN 1037 enligt bestämmelserna i direktiverna 2006/42/EG, 2014/30/EU, 2011/65/EU
(DK) CE-21 - Konformitetserklæring. Vi erklærer under almindeligt ansvardt at dette produkt er i overensstemmelse med folgende normer eller normative dokumenter: EN 62841-1, EN ISO 12100, EN ISO 13857, EN ISO 13854, EN 28662-1, EN 61000-6-3, EN 61000-6-2, EN 60529, EN 1037 i henhold til bestemmelseme i direktivørne 2006/42/E0F, 2014/30/EU, 2011/65/EU

(N) CE-'21 - Konformitetserklæring. Vi erklærer på eget ansvarlighet at dette produkt er i overensstemmelse med følgende standarder eller standard-dokumenter: EN 62841-1, EN ISO 12100, EN ISO 13857, EN ISO 13854, EN 28662-1, EN 61000-6-3, EN 61000-6-2, EN 60529, EN 1037 i henhold til bestemmelsene i direktive ne 2006/42/E∅F, 2014/30/EU, 2011/65/EU
(FIN) CE-'21 - Todistus slandardinmukaisuudesta. Asiasta vastaavana todistamme täton, että tämä tuote on seuraavien standardien ja standardo/misasiakirjojen vaatimusten mukainen: EN 62841-1, EN ISO 12100, EN ISO 13857, EN ISO 13854, EN 28662-1, EN 61000-6-3, EN 61000-6-2, EN 60529, EN 1037 ja vastaa säädoksiäa 2006/42/EG, 2014/30/EU, 2011/65/EU
(SK) CE-'21 - Prehlásenie o zhode. Prehlasujeme na vlastnú zodpovednosť, že tieto produkty sú v súlade s nasledovnými normami: EN 62841-1, EN ISO 12100, EN ISO 13857, EN ISO 13854, EN 28662-1, EN 61000-6-3, EN 61000-6-2, EN 60529, EN 1037 a v zhode so smernicami 2006/42/EG, 2014/30/EU, 2011/65/EU
(PL) CE-'21 - Zgodnosc z dyrektywami CE. Swiadomi odpowiedzialności oswiadczamy, ze niniejszy produkt jest zgodny z następujacymi normami lub dokumentacja normatywna: EN 62841-1, EN ISO 12100, EN ISO 13857, EN ISO 13854, EN 28662-1, EN 61000-6-3, EN 61000-6-2, EN 60529, EN 1037 zgodnie z postanowieniami wytycznych 2006/42/EG, 2014/30/EU, 2011/65/EU
(CZ) CE-21 - Prohlášení o shode. Prohlášujeme na vlasni zodpovednost, ze tyto produkty splnuji následujici normy nebo normativní listiny: EN 62841-1, EN ISO 12100, EN ISO 13857, EN ISO 13854, EN 28662-1, EN 61000-6-3, EN 61000-6-2, EN 60529, EN 1037; Ve shode se smernicami 2006/42/EG, 2014/30/EU, 2011/65/EU
(SLO) CE: '21 - Izjava o skladnostl. S tem potrjulemo splošno odgovornost, da je ta izdelek narejen v skladu z navedenimi normami in standardi: EN 62841-1, EN ISO 12100, EN ISO 13857, EN ISO 13854, EN 28662-1, EN 61000-6-3, EN 61000-6-2, EN 60529, EN 1037 ter določbami in smernicami 2006/42/EG, 2014/30/EU, 2011/65/EU
(HR) CE-21 - Izjava o sukladnosti. Pod punom odgovornošću izjavljujemo da je proizvod naveden u naslovu ovog dokumenta sukladan sa primijenjonim normama i normativnim dokumentima : EN 62841-1, EN ISO 12100, EN ISO 13857, EN ISO 13854, EN 28662-1, EN 61000-6-3, EN 61000-6-2, EN 60529, EN 1037 u skladu sa odredba-ma preporuka 2006/42/EG, 2014/30/EU, 2011/65/EU
(H) CE-21 - Megfelelőségi nyilatkozat. Kéziműködtetésű elektromos kéziszerszámok: Teljes felelősségel kijelentjük, hogy ezek a termékek a következő szabványokkal és irányelvekkel összhangban vannak: EN 62841-1, EN ISO 12100, EN ISO 13857, EN ISO 13856, EN 28662-1, EN 61000-6-3, EN 61000-6-2, EN 60529, EN 1037; és megfelelnek a rendeltetés szerinti 2006/42/EG, 2014/30/EU, 2011/65/EU irányelveknek.
VROUEN2P1DECLARATI DE conformitate. Noi declaram pe propria răspundere că acest produs este în conformitate cu următoarele norme și documente normative: EN 62841-1, EN ISO 12100, EN ISO 13857, EN ISO 13854, EN 28662-1, EN 61000-6-3, EN 61000-6-2, EN 60529, EN 1037; potrivit dispoziților directivelor 2006/42/EG, 2014/30/EU, 2011/65/EU

CE John - Christopher Solin

Declaration of conformity CT-3001/STBT

KlauKe

(D) CE-21 - Konformitätserklärung RED. Wir erklären in alleiniger Verantwortlichkeit, daß dieses Produkt mit den folgenden Normen oder normativen Dokumenten übereinstimmt: EN 62368-1, EN 301489-1, EN 301489-17, EN 300328 V2.2.2, EN 62479 gemäß den Bestimmungen der Richtlinien 2014/53/EU, 2011/65/EU
(GB) CE-'21 - Declaration of conformity RED. We declare under our sole responsibility that this product is in conformity with the following standards or normative documents: EN 62368-1, EN 301489-1, EN 301489-17, EN 300328 V2.2.2, EN 62479 in accordance with the regulations of directives 2014/53/EU, 2011/65/EU
(F) CE-21 - Déclaration de conformité RED. Nous déclarons sous notre seule reponsabilité que ce produit est en conformité avec les normes ou documents normatifs suivants: EN 62368-1, EN 301489-1, EN 301489-17, EN 300328 V2.2.2, EN 62479 conformément aux réglementations des directives 2014/53/EU, 2011/65/EU
(E) CE-21 - Declaración de conformidad RED. Declaramos bajo nuestra sola responsabilidad que este producto está en conformidad con las normas o documentos normativos siguientes: EN 62368-1, EN 301489-1, EN 301489-17, EN 300328 V2.2.2, EN 62479 de acuerdo con las regulaciones de las directivas 2014/53/EU, 2011/65/EU
(I) CE-21 - Dichiarazione di conformità RED. Dichiariamo sotto la nostra esclusiva responsabilità che questo prodotto è conforme alle seguenti norme e documenti normativi: EN 62368-1, EN 301489-1, EN 301489-17, EN 300328 V2.2.2, EN 62479 conformemente alle disposizioni delle direttive 2014/53/EU, 2011/65/EU
(P) CE-21 - Declaração de conformidade RED. Declaramos sob nossa exclusiva responsabilidade que este producto cumpre as seguintes normas ou documentos normativos: EN 62368-1, EN 301489-1, EN 301489-17, EN 300328 V2.2.2, EN 62479 conforme as disposições das directivas 2014/53/EU, 2011/65/EU
(NL) CE-21 - Konformiteitsverklaring RED. Wij verklaren en wij stellen ons er alleen voor verantwoordelijk dat dit produkt voldoet aan de volgende normen of normatieve documenten: EN 62368-1, EN 301489-1, EN 301489-17, EN 300328 V2.2.2, EN 62479 overeenkomstig de bepalingen van de richtlijnen 2014/53/EU, 2011/65/EU
(GR) CE-21 - ΔΙΛΩΣΠ ΣΥΜΟΡΦΩΣΠΣ M RED. ε αναληψη συνολικης δηλωνομε- οτι το τορον προιον συμφωνεί με τα παρακατο ποστυτα και με τα προτυτα που αναφερ εγγρασα∞ EN 62368-1, EN 301489-1, EN 301489-17, EN 300328 V2.2.2, EN 62479 συμφωνα με τοχς κορούσμονς 2014/53/EU, 2011/65/EU
(S) CE-'21 - Konformitetsdeklaration RED. Vi förklarar på eget ansvar att denna produkt överenstämmer med följande normer eller normativa dokument: EN 62368-1, EN 301489-1, EN 301489-17, EN 300328 V2.2.2, EN 62479 enligt bestämmelsema i direktiverna 2014/53/EU, 2011/65/EU
(DK) CE-21 - Konformitotserklæring RED. Vi erklærer under almindeligt ansvardt at dette produkt er i overensstemmelse med folgende normer eller normative dokumenter: EN 62368-1, EN 301489-1, EN 301489-17, EN 300328 V2.2.2, EN 62479 i henhold til bestlemmelseme i direktiveme 2014/53/EU, 2011/65/EU

(N) CE-21 - Konformitetserklæring RED. Vi erklærer på eget ansvarlighet at dette produkt er i overensstemmelse med følgende standarder eller standard-dokumenter: EN 62368-1, EN 301489-1, EN 301489-17, EN 300328 V2.2.2, EN 62479 i henhold til bestemmelsene i direktive ne 2014/53/EU, 2011/65/EU
(FIN) CE-21 - Todistus slandardinmukaisuudesta RED. Asiasta vastaavana todistamme täten, että tämä tuote on seuraavion standardien ja standardoimisasikirjojen vaatimusten mukainen: EN 62368-1, EN 301489-1, EN 301489-17, EN 300328 V2.2.2, EN 62479 ja vastaa säädoksiä 2014/53/EU, 2011/65/EU
(SK) CE-21 - Prehlásenie o zhode RED. Prehlasujeme na vlastnú zodpovednosť, že tieto produkty sú v súlade s nasledovními normami: EN 62368-1, EN 301489-1, EN 301489-17, EN 300328 V2.2.2, EN 62479 a v zhode so smernicemi 2014/53/EU, 2011/65/EU
(PL) CE-21 - Zgodnosc z dyrektywami RED. Swiadomi odpowiedzialnosci oswladczamy, ze niniejszy produkt jest zgodny z następującymi normami lub dokumentacja normatywna: EN 62368-1, EN 301489-1, EN 301489-17, EN 300328 V2.2.2, EN 62479 zgodnie z postanowieniami wytycznych 2014/53/EU, 2011/65/EU
(CZ) CE-21 - Prohlášení o shode RED. Prohlášujeme na vlastni zodpovednost, ze tyto produkty splnuji náslodujici normy nebo normativni listiny: EN 62368-1, EN 301489-1, EN 301489-17, EN 300328 V2.2.2, EN 62479 Ve shode se smemicemi 2014/53/EU, 2011/65/EU
(SLO) CE-21 - Izjava o skladnosti RED. S tem potrjujemo splošno odgovomost, da je ta izdelek narejen v skladu z navedenimi normami in standardi EN 62368-1, EN 301489-1, EN 301489-17, EN 300328 V2.2.2, EN 62479 ter določbami in smernicami 2014/53/EU, 2011/65/EU
(HR) CE-21 - Izjava o sukladnosti RED. Pod punom odgovornošću izjavljujemo da je proizvod naveden u naslovu ovog dokumenta sukladan sa primijenjenim normama i normativnim dokumentima : EN 62368-1, EN 301489-1, EN 301489-17, EN 300328 V2.2.2, EN 62479 u skladu sa odredbama preporuka 2014/53/EU, 2011/65/EU
(H) CE-21 - Megfelelő ségi nyllatkozat RED. Kéziműködtetésű elotromos kéziszerszámok. Teljes felelősségel ki- jelentülk, hogy egyek a termékek a következő szabványokkal és irányelvekkel összhangban vannak: EN 62368-1, EN 301489-1, EN 301489-17, EN 300328 V2.2.2, EN 62479 és megfelelnek a rendeltetés 2014/53/EU, 2011/65/EU irányelveknek.
(RO) CE-'21 - Declarație de conformitate RED. Noi declarăm pe propria răspundere că acest produs este în conformitate cu următoarele norme și documente normative: EN 62368-1, EN 301489-1, EN 301489-17, EN 300328 V2.2.2, EN 62479 potrivit dispoziiilor directivelor 2014/53|EU, 2011/65/EU

Declaration of conformity CT-3001/CCPBT

infrastructure for a connected world

Blackfi n Tools Certifi cate of Calibration

Subject: Panduit BlackFin Series **

The Panduit BlackFin tools have completed the following Testing criteria in the Factory before shipped.

Checklist Final Inspection

1. Final Inspection (type, serial number, product group, etc.)
2. Check head for stop or locking
3. Check the pressure with the housing closed
4. Check if all screws are installed
5. Check whether the machine is "reset"
6. Check if a warning sticker is attached
7. Check whether the inspection sticker is attached
8. Check the cleanliness (oil leakage, case, etc.)
9. Check whether the accessories are complete
10. Check whether the desired test reports are attached (TQ16, etc.)
11. The final inspection is carried out by the Service Center Goods Department

The user of the Panduit product is responsible for verifying suitability of the product for the application and assumes all risk and liability in connection with its use.

Our most important connection is with you.

We have the knowledge and experience to help you make the most of your infrastructure investment.

www.panduit.com

Let's Connect

P: 800-777-3300 :: F: 708-532-1811

www.panduit.com/en/support/contact-us.html

HE.20212_B