CT-3001/STBT - Hand tool Panduit - Free user manual and instructions

USER MANUAL CT-3001/STBT Panduit

infrastructure for a connected world

BlackFin

CT-3001/STBT

Instruction Manual

Serialnumber

Pic. similar

HE.20210_B © 11/2021 R&D-2

Panduit Unite LLP West World, West Gale, London, W5 1UD

CT-3001/STBT

infrastructure for a connected world

AUTO QUICK STOP MAN 2K IPS SERVICE OLED 18V Li-Ion ELECTRONIC PDF PANDUIT Energy Save easy REAL TIME LED datecode For US and Canada only FCC ID: RRR-S50 • IC: 4957A-S50 Model: CFM The device comprises with Part 1 of the FCC Rules and with industry Canada information. RSS standards(1). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undiased operation. N=30065 304711 XN 142 batch# e.g. 304711 datecode e.g. X = 2027; N = Jan. consecutive# e.g. "142" = tool # 142 Bluetooth® The Bluetooth® word mark and Bluetooth® symbol are registered trademarks of Bluetooth SIG, Inc. and any use by Panduit is licensed.

Bluetooth®

The Bluetooth ^® word mark and Bluetooth ^® symbol are registered trademarks of Bluetooth SIG, Inc. and any use by Panduit is licensed.

datecode

For US and Canada only

RCC ID: RJR-S50 • IC: 4957A-S50 Model: CRM

This device comprises with Part 15 of the RCC Rules and with industry Canada license-exempt RSS standards(a). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation

batch# e.g. 304711
datecode e.g. X = 2027; N = Jan.
consecutive# e.g. "142" = tool # 142

304711
XN
142

Pic. similar / Intended Use

HE.20210_B © 11/2021

CT-3001/STBT

infrastructure for a connected world

0,6" 16mm 3,7" 90mm 3,5" 90mm 17" 430,2mm 312 4,6" 116mm 4,9" 2,9" 75mm 1,6" 40mm 125mm

1 PANDUIT 2 PANDUIT C: 300000000000000000000000000000000000000000000000000000000000000000000000000000 Wage: 15.75% (Fave) / 15.75% (Mn) Solder: 4.85% (Folder) / 4.85% (Mn) Access: 96.5% (Folder) / 96.5% (Mn) Access: 96.5% (Folder) / 96.5% (Mn) Access: 96.5% (Folder) / 96.5% (Mn) Access: 96.5% (Folder) / 96.5% (Mn) Access: 96.5% (Folder) / 96.5% (Mn) Access to the Company 3 UK CA LISTED TOOL B0103807

6,6 lbs 3,0 kg VIBR <2,5m/s² +104°F +40°C +14°F -10°C 6.7 Ton (60 kN) BiO

WARNING

Read all safety warnings, instructions, illustrations and specifications provided with this power tool.

Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury.

Save all warnings and instructions for future reference.

CT-3001/STBT comes with this instruction booklet and

QTY Item QTY Item 1 Carrying Case 2 Li-ion Makita Batteries
1 Crimp Tool 1 Die Adapter (CD-3001/ST-DA)
1 Battery Charger 1 Safety Booklet

WORK SERVICE DON'T DO DON'T DO General safety rules

Use tool only with 18 V Makita battery

Takita® BL1840 18V= 4.0Ah 72Wh Li-ion ★

Takita® Li-ion BL1830 18V = 3.0Ah 54Wh Li-ion Ni No Moist Corporation Made in Japan

BL1840(B) 36 CT-LIBCMK4AH BL1830(B) 22 CT-LIBCMK3AH

10 - 40°C

Pic. similar / Intended Use HE.20210_B © 11/2021 III

WORK SERVICE DON'T DO DON'T DO General safety rules

CT-3001/STBT

infrastructure for a connected world

< 360° ✓ > 360° Authorised Service Center STOP

DON'T DO! YES!

1. 2. 3. 1. 2. 3.

30% max.

LED on/off PRESS RESS LED LEX

Pic. similar / Intended Use

HE.20210_B © 11/2021 IV

WORK SERVICE DON'T DO DON'T DO General safety rules

CT-3001/STBT

PANDUIT™
infrastructure for a connected world

1. 2.

Illustration of a hand holding a mechanical clamp with an arrow indicating motion (no text or symbols)

1 2 CLICK

PANDUIT KC22-600B

CLICK CLICK PANDUIT CD-3001/ST-DA

PANDUIT CD-2001

Pic. similar / Intended Use
HE.20210_B © 11/2021 V

WORK SERVICE DON'T DO

General safety rules

CT-3001/STBT

PANDUIT™
infrastructure for a connected world

Technical diagram of a mechanical clamp or bracket assembly with numbered parts and directional arrow indicating motion or force.

3D mechanical component with blue indicator lights and a 'CLICK' button label (no readable text or symbols beyond the button)

CLICK

Close-up of a mechanical power crimping tool with orange directional arrows indicating press application (no text or symbols on the component itself)

PRESS

Pic. similar / Intended Use
HE.20210_B © 11/2021 VI

WORK SERVICE DON'T DO DON'T DO General safety rules

CT-3001/STBT

PANDUIT™

infrastructure for a connected world

Close-up of a mechanical power crimp tool with orange arrows indicating press application (no text or symbols on the tool itself)

Close-up of a mechanical cable with a yellow connector and green checkmark indicating inspection (no text or symbols)

MAN PRESS

(QUICK STOP) (QUICK STOP)

Pic. similar / Intended Use

HE.20210_B © 11/2021 VII

WORK SERVICE DON'T DO DON'T DO General safety rules

CT-3001/STBT

infrastructure for a connected world

1 2 PRES PANQUIT ERROR CODE: ***** Error code *1 3a BT P 3 bar P 3 bar Bluetooth (if connected) Battery charging level Current pressure Pressure max. *2 3b bar / psi to change: bar / psi 3c bar / psi 3b kN / 1! to change: kN / lbf 3d BTS F 74 lbf F 369lbf

4a USER 3: RD3 Doppelklick Doubleclick 4b USER SELECT: RD3 Einfachklick Singleclick enter menua 3 sec. USER SELECT: RD3 Doppelklick Doubelclick select 4c USER SELECT: RD3 Doppelklick Doubelclick 4d USER SELECT: RD3 Doppelklick Doubelclick confirmed 5 NEXT SERVICE: 9826 OPs Cycles (until next service) 6 TOTAL: t = 0.07 h Q = 2142 Ah n = 174 Capacity

crimps

7 RETURN

1. Overcurrent comparator

3 Overheat board

4 Overheat battery

5 Battery empty, operation step

6 Faulty crimp motor in operation

1. Faulty crimp motor not in operation

8 Low battery

9 Battery empty 10 RTC battery

1. Service necessary

2. BTC and found

13 RTC non found 14 BT unit and four

1. ET unit not found

2. Mobile unit not found

3. Pressure sensor not found

4. Burst pressure exceeded

18 Battery temperature top low

19 Battery reserves

20 Overcurrent fuse (I)

21 Remote Control Battery Low!*

22 Service necessary SAST1

23 Service necessary SAST2

24 Service necessary SAS13

25 Remote mode: tool trigger not actuated

1. Overhead motor

28 Service necessary: Pressure low

29 Service necessary: Pressure high

23 Service Ownership, Bruckhorn

WORK SERVICE DON'T DO DON'T DO General safety rules

CT-3001/STBT

infrastructure for a connected world

Tool Link App

Klauke GmbH

Changes or modifications made to this equipment not expressly approved by Klauke may void the FCC authorization to operate this equipment.

CT-3001/STBT

infrastructure for a connected world

BEFORE WORK DIN EN 50110

graph TD
    A["1. OIL"] --> B["2. Hand"]
    B --> C["3. Box with 'Black Fin' logo"]
    C --> D["4. Paper icon with 'PANDUIT' label"]

Authorised Service Center

OLD PART REPLACEMENT SAFETY NEW ✓ 3 years or 10.000 operations Authorised Service Center 2 years Warranty World wide Tool Service AUDICE AIC 2 years Warranty World wide Tool Service AUDICE AIC + 3 years Warranty PANDUIT Tool warranty 5 years

WEEE 2012/19/EU [e-mail]

PAYOUT once a year Recommendation Empfehlungs Authorised Service Center

CT-3001/STBT

infrastructure for a connected world

				Wann/When/Quand/Quando/cuándo/Wanneer/Kогда/это происходит/Kiedy/quando	Warum/Why/Pourqoui/Porquê/?por qué?/Waarom/Причина/Dlaczego/Perché
				nach Arbeitsvorgang after working cycle après opération de travailDespués del proceso de trabajo após o processo de trabalho na bedrijfscyclusпосле цикла опрессовки po zakończeniu pracy dopo il processo di lavoro
z				nach Arbeitsvorgang after working cycle après opération de travailDespués del proceso de trabajo após o processo de trabalho na bedrijfscyclusпосле цикла опрессовки po zakończeniu pracy dopo il processo di lavoro
				während der Übertemperatur while exceeding the temp. limit pendant surchauff e en caso de temperatura excesiva durante a temperatura excessiva tijdens te hoge temperatuur при высокой температуре внутри корпуса przy przegrzaniu superando il limite di temperatura	Werkzeug zu heißUnit too hot outil surchauff éHerramienta demasiado caliente ferramenta demasiado quente gereedschap te heetПереррев инструмента urządzenie za gorąceUtensile troppo caldo

DGBFENLP RUS PLIDGBFENLP

Authorised Service Center

https://www.klauke.com/de/en/service-centre-and-repairs

Pic. similar / Intended Use

HE.20210_B © 11/2021 XI

WORK SERVICE DON'T DO

General safety rules

CT-3001/STBT

infrastructure for a connected world

			Wann/When/Quand/Quando/cuándo/Wanneer/Kогда/это происходит/Kiedy/quando	Warum/Why/Pourqoui/Porquê/?por qué?/Waarom/Причина/Dlaczego/Perché
	1 x 1 x		nach Arbeitsvorgang after working cycle après opération de travail Después del proceso de trabajo após o processo de trabalho na bedrijfscyclus после цикла опрессовки po zakończeniu pracy dopo il processo di lavoro	Fehler: der notwendige Pressdruck wurde nicht erreicht. Es handelt sich um eine manuelle Unterbrechung der Pressung bei stehendem Motor.Error: the required pressure has not been reached. The operator has interrupted the pressing cycle manually while the motor was not running.ERREUR: Pression nécessaire pas atteinte. Il s'agit d'une interruption manuelle de la sertissage au moteur arrêté.Error: No se ha alcanzado la presión necesaria o el operador ha interrumpido el ciclo a mano mientras el motor ha parado.Falha: a pressão de prensagem necessária não foi alcançada. Trata-se de uma interrupção manual da prensagem com o motor parado.Foutmelding: De benodigde persdruk wordt niet bereikt. De gebruiker heeft de verkrimping handmatig stopgezet aangezien de motor niet actief is.Ошибка: не было достигнуто требуемое усилие опрессовки или оператор прервал процесс опрессовки вручную, когда двигатель остановился.Błąd: konieczne ciśnienie nie zostało osiągnięte. Użytkownik przerwał cykl pracy ręcznie w chwili, gdy silnik nie był włączonyErrore: la pressione richiesta non è stata raggiunta. L'operatore ha interrotto manualmente il ciclo di pressatura mentre il motore non è in funzione.
			nach Arbeitsvorgang after working cycle après opération de travail Después del proceso de trabajo após o processo de trabalho na bedrijfscyclus после цикла опрессовки po zakończeniu pracy dopo il processo di lavoro	Schwerwiegender Fehler: Pressdruck wurde bei laufendem Motor nicht erreicht.Serious Error: The pressure has not been reached while the motor was running.Erreur Grave: Pression pas atteinte au moteur courant.Error grave: No se ha alcanzado presión mientras el motor estaba en marchaFalha grave: a pressão de prensagem não foi alcançada com o motor em funcionamento.Urgente foutmelding: De persdruk werd bij een werkende motor niet bereikt.Серьезная ошибка: не было достигнуто требуемое усилие опрессовки во время работы двигателяPoważny błąd: konieczne cisnienie nie zostało osiągnięte podczas pracy silnikaErrore grave: la pressione non è stata raggiunta mentre il motore è in funzione.

Pic. similar / Intended Use

HE.20210_B © 11/2021

Declaration of conformity CT-3001/STBT

(D) CE-* - Konformitätserklärung. Wir erklären in alleiniger Verantwortlichkeit, daß dieses Produkt mit den folgenden Normen oder normativen Dokumenten übereinstimmt: EN 62841-1, EN ISO 12100, EN ISO 13857, EN 61000-6-3, EN 61000-6-2, EN 60529, EN ISO 14118 gemäß den Bestimmungen der Richtlinien 2006/42/EG, 2014/30/EU, 2011/65/EU
(GB) CE- ^ - Declaration of conformity. We declare under our sole responsibility that this product is in conformity with the following standards or normative documents: EN 62841-1, EN ISO 12100, EN ISO 13857, EN 61000-6-3, EN 61000-6-2, EN 60529, EN ISO 14118 in accordance with the regulations of directives 2006/42/EG, 2014/30/EU, 2011/65/EU
(F) CE ^-4 - Déclaration de conformité. Nous déclarons sous notre seule reponsabilité que ce produit est en conformité avec les normes ou documents normatifs suivants: EN 62841-1, EN ISO 12100, EN ISO 13857, EN 61000-6-3, EN 61000-6-2, EN 60529, EN ISO 14118 conformément aux réglementations des directives 2006/42/EG, 2014/30/EU. 2011/65/EU
(E) CE- ^+ - Declaración de conformidad. Declaramos bajo nuestra sola responsabilidad que este producto está en conformidad con las normas o documentos normativos siguientes: EN 62841-1, EN ISO 12100, EN ISO 13857, EN 61000-6-3, EN 61000-6-2, EN 60529, EN ISO 14118 de acuerdo con las regulaciones de las directivas 2006/42/EG, 2014/30/EU, 2011/65/EU
(I) CE:* - Dichiarazione di conformità. Dichiariamo sotto la nostra esclusiva responsabilità che questo prodotto è conforme alle seguenti norme e documenti normativi: EN 62841-1, EN ISO 12100, EN ISO 13857, EN 61000-6-3, EN 61000-6-2, EN 60529, EN ISO 14118 conformemente alle disposizioni delle direttive 2006/42/EG, 2014/30/EU, 2011/65/EU
(P) CE- ^™ - Declaração de conformidade. Declaramos sob nossa exclusiva responsabilidade que este producto cumpre as seguintes normas ou documentos normativos: EN 62841-1, EN ISO 12100, EN ISO 13857, EN 61000-6-3, EN 61000-6-2, EN 60529, EN ISO 14118 conforme as disposições das direcivas 2006/42/EG, 2014/30/EU, 2011/65/EU
(NL) CE:* - Konformiteitsverklaring. Wij verklaren en wij stellen ons er alleen voor verantwoordelijk dat dit produkt voldoet aan de volgende normen of normatieve documenten: EN 62841-1, EN ISO 12100, EN ISO 13857, EN 61000-6-3, EN 61000-6-2, EN 60529, EN ISO 14118 overeenkomstig de bepalingen van de richtlijnen 2006/42/EG, 2014/30/EU, 2011/65/EU
(GR) CE- ^ - ΔΗΛΩΣΗ ΣΥΜΜΟΡΦΩΣΗΣ Με αναλψη συνολικης δηλωνομεστι το πορον προσον πριφωσει με τα παρακατο ποστυτα και με τα ηραναφεροιται στα υχετικο εγγρασα EN 62841-1, EN ISO 12100, EN ISO 13857, EN 61000-6-3, EN 61000-6-2, EN 60529, EN ISO 14118 πριφωσει με τοχς κονούσμους 2006/42/EG, 2014/30/EU, 2011/65/EU
(S) CE- ^ - Konformitetsdeklaration. Vi förklarar på eget ansvar att denna produkt överenstämmer mod följande normer eller normativa dokument: EN 62841-1, EN ISO 12100, EN ISO 13857, EN 61000-6-3, EN 61000-6-2, EN 60529, EN ISO 14118 enligt bestämmelserna i direktverna 2006/42/EG, 2014/30/EU, 2011/65/EU
(DK) CE- ^* - Konformitetserklæring. Vi erklærer under almindeligt ansvardt at dette produkt er i overensstemmelse med folgende normer eller normative dokumenter: EN 62841-1, EN ISO 12100, EN ISO 13857, EN 61000-6-3, EN 61000-6-2, EN 60529, EN ISO 14118 i henhold til bestemmelseme i direktiveme 2006/42/E∅F, 2014/30/EU, 2011/65/EU

(N) CE-* - Konformitetserklæring. Vi erklærer på eget ansvarlighet at dette produkt er i overensstemmelse med følgende standarder eller standard-dokumenter: EN 62841-1, EN ISO 12100, EN ISO 13857, EN 61000-6-3, EN 61000-6-2, EN 60529, EN ISO 14118 i henhold til bestemmelsene i direktive ne 2006/42/E∅F, 2014/30/EU, 2011/65/EU
(FIN) CE- ^ - Todistus slandardinmukaisuudesta Asiasta vastaavana todistamme täten, että tämä tuoto on seuraavien standardien ja standardoisasiakirjojen vaatmusten mukainen: EN 62841-1, EN ISO 12100, EN ISO 18357, EN 61000-6-3, EN 61000-6-2, EN 60529, EN ISO 14118 ja vastaa säädoksiää 2006/42/EG, 2014/30/EU, 2011/65/EU
(SK) CE- ^ - Prehlásenie o zhode. Prehlasujeme na vlastnú zodpovednost, že tieto produkty sú v súlade s nasledovnými normami: EN 62841-1, EN ISO 12100, EN ISO 13857, EN 61000-6-3, EN 61000-6-2, EN 60529, EN ISO 14118 a v zhode so smernicemi 2006/42/EG, 2014/30/EU, 2011/65/EU
(PL) CE- ^ - Zgodnosć z dyrektywami CE. Swiadomi odpowiedzialności oswiadczamy, ze niniejszy produkt jest zgodny z następującymi normami lub dokumentacja normatywna: EN 62841-1, EN ISO 12100, EN ISO 13857, EN 61000-6-3, EN 61000-6-2, EN 60529, EN ISO 14118 zgodnie z postanowieniami wytycznych 2006/42/EG, 2014/30/EU, 2011/65/EU
(CZ) CE- ^ - Prohlášení o shode. Prohlášujeme na vlastní zodpovednost, ze tyto produkty splnuji následující normy nebo normativní listiny: EN 62841-1, EN ISO 12100, EN ISO 13857, EN 61000-6-3, EN 61000-6-2, EN 60529, EN ISO 14118; Ve shode se smernicemi 2006/42/EG, 2014/30/EU, 2011/65/EU
(SLO) CE- ^- - Izjava o skladnosti. S tem potrjujemo splošno odgovomost, da je ta izdelek narejen v skladu z navedenimi normami in standardi: EN 62841-1, EN ISO 12100, EN ISO 13857, EN 61000-6-3, EN 61000-6-2, EN 60529, EN ISO 14118 ter določbarni in smemicami 2006/42/EG, 2014/30/EU, 2011/65/EU
(HR) CE- ^ - Izjava o sukladnosti. Pod punom odgovornošću izjavljujemo da je proizvod naveden u naslovu ovog dokumenta sukladan sa primijenjonim normama i normativnim dokumentima: EN 62841-1, EN ISO 12100, EN ISO 13857, EN 61000-6-3, EN 61000-6-2, EN 60529, EN ISO 14118 u skladu sa odrecbama preporuka 2006/42/EG, 2014/30/EU, 2011/65/EU
(H) CE- ^- - Megfelelőségi nyilatkozat. Kéziműködtetésű elektromos kéziszerszámok: Teljes felelősségel kijelentjük, hogy ezek a termékek a következő szabványokkal és irányelvekkel összhangban vannak: EN 62841-1, EN ISO 12100, EN ISO 13857, EN 61000-6-3, EN 61000-6-2, EN 60529, EN ISO 14118; és megfelelnek a rendeltetés szerinti 2006/42/EG, 2014/30/EU, 2011/65/EU irányelveknek.
(RO) CE- ^ - Declaratie de conformitate. Noi declaram pe propria răspundere că acest produs este în conformitate cu 77106. Tumătoarile horme și documente normative: EN 62841-1, EN ISO 12100, EN ISO 13857, EN 61000-6-3, EN 61000-6-2, EN 60529, EN ISO 14118; potrivit dispoziților directivelor 2006/42/EG, 2014/30/EU, 2011/65/EU

Declaration of conformity CT-3001/STBT

KlauKe

(D) CE- ^ -Konformitätserklärung RED. Wir erklären in alleiniger Verantwortlichkeit, daß dieses Produkt mit den folgenden Normen oder normativen Dokumenten übereinstimmt: EN IEC 62368-1, ETSI EN 301489-1, ETSI EN 301489-17, ETSI EN 300328 V2.2.2, EN 62479 gemäß den Bestimmungen der Richtlinien 2014/53/EU, 2011/65/EU
(GB) CE- ^ - Declaration of conformity RED. We declare under our sole responsibility that this product is in conformity with the following standards or normative documents: EN IEC 62368-1, ETSI EN 301489-1, ETSI EN 301489-17, ETSI EN 300328 V2.2.2, EN 62479 in accordance with the regulations of directives 2014/53/EU, 2011/65/EU
(F) CE- ^ - Déclaration de conformité RED. Nous déclarons sous notre seule reponsabilité que ce produit est en conformité avec les normes ou documents normatifs suivants: EN IEC 62368-1, ETSI EN 301489-1, ETSI EN 301489-17, ETSI EN 300328 V2.2.2, EN 62479 conformément aux réglementations des directives 2014/53/EU, 2011/65/EU
(E) CE- ^ -Declaración de conformidad RED. Declaramos bajonuestra sola responsabilidad que este producto está en conformidad con las normas o documentos normativos siguientes: EN IEC 62368-1, ETSI EN 301489-1, ETSI EN 301489-17, ETSI EN 300328 V2.2.2, EN 62479 de acuerdo con las regulaciones de las directivas 2014/53/EU, 2011/65/EU
(I) CE = - Dichiarazione di conformità RED. Dichiariamo sotto la nostra esclusiva responsabilità che questo prodotto è conforme alle seguenti norme e documenti normativi: EN IEC 62368-1, ETSI EN 301489-1, ETSI EN 301489-17, ETSI EN 300328 V2.2.2, EN 62479 conformemente alle disposizioni delle direttive 2014/53/EU, 2011/65/EU
(P) CE- ^* - Declaração de conformidade RED. Declaramos sob nossa exclusiva responsabilidade que este producto cumpre as seguintes normas ou documentos normativos: EN IEC 62368-1, ETSI EN 301489-1, ETSI EN 301489-17, ETSI EN 300328 V2.2.2, EN 62479 conforme as disposições das directivas 2014/53/EU, 2011/65/EU
(NL) CE-** - Konformiteitsverklaring RED. Wij verklaren en wij stellen ons er alleen voor verantwoordelijk dat dit produkt voldoet aan de volgende normen of normatieve documenten: EN IEC 62368-1, ETSI EN 301489-1, ETSI EN 301489-17, ETSI EN 300328 V2.2.2, EN 62479 overaenkomstig de bepalingen van de richtlijnen 2014/53/EU, 2011/65/EU
(GR) CE-* - ΔΙΛΩΣΠ ΣΥΜΜΟΡΦΩΣΠΣ M RED. ε αναληψη συνολικης δηλεωρομε το το πορον προιον στιφωτει με τα παρακτο ποστυτα και με τα προτιησα που ανα εγγρασα∞ EN IEC 62368-1, ETSI EN 301489-1, ETSI EN 301489-17, ETSI EN 300328 V2.2.2, EN 62479 στιφωτει με τοχς κορονωρως 2014/53/EU, 2011/65/EU
(S)CE -*-Konformitetsdeklaration RED. Vi förklararpåegelansvar attldennaproduktöverenstämmermed följande normer eller normativa dokument: EN IEC 62368-1, ETSI EN 301489-1, ETSI EN 301489-17, ETSI EN 300328 V2.2.2, EN 62479 enligt bestämmelsema i direktiverna 2014/53/EU, 2011/65/EU
(DK) CE- ^- - Konformitetserklæring RED. Vi erklærer under almindeligt ansvardt at dette produkt er i overensstemmelse med folgende normer eller normativa dokumenter: EN IEC 62368-1, ETSI EN 301489-1, ETSI EN 301489-17, ETSI EN 300328 V2.2.2, EN 62479 i henhold til bestemmelseme i direktverne 2014/53/EU, 2011/65/EU

(N)CE- * -Konformitetserklæring RED. Vierklærerpå egetansvarlighetatdetteprodukterioverensstemmelsemedføgende standardereller standard-dokumenter: ENIEC 62368-1, ETSIEN 301489-1, ETSIEN 301489-17, ETSIEN 300328V2.2.2, EN 62479 i henhold til bestemmelsene i direktive ne 2014/53/EU, 2011/65/EU
(FIN) CE-* - Todistus slandardinmukaisuudesta RED. Asiasta vastaavana toclistamme täten, että tämä tuote on seuraavien standardien ja standardoimisasiakirjojen vaatimusten mukainen: EN IEC 62368-1, ETSI EN 301489-1, ETSI EN 301489-17, ETSI EN 300328 V2.2.2, EN 62479 ja vastaa säädoksiä 2014/53/EU, 2011/65/EU
(SK) CE- ^ - Prehlásenie o zhode RED. Prehlasujeme na vlastnú zodpovednosť, že tieto produkty sù v súlade s nasledovnými normami: EN IEC 62368-1, ETSI EN 301489-1, ETSI EN 301489-17, ETSI EN 300328 V2.2.2, EN 62479 a v zhode so smemlicemi 2014/53/EU, 2011/65/EU
(PL) CE: ^ - Zgodnosć z dyrektywami RED. Swiadomi odpowiedzialnosci oswiadczamy, ze niniejszy produkt jest zgodny z następujacymi normami lub dokumentacja normalywna: EN IEC 62368-1, ETSI EN 301489-1, ETSI EN 301489-17, ETSI EN 300328 V2.2.2, EN 62479 zgodnie z postanowieniami wytycznych 2014/53/EU, 2011/65/EU
(CZ) CE-“ - Prohlášení o shode RED. Prohlášujeme na vlastni zodpovednost, ze tyto produkty splnuji následující normy nebo normativní listiny: EN IEC 62368-1, ETSI EN 301489-1, ETSI EN 301489-17, ETSI EN 300328 V2.2.2, EN 62479 Ve shode se smamicemi 2014/53/EU, 2011/65/EU
(SLO) CE- ^ - Izjava o skladnosti RED. S tem potrjujemo splošno odgovornost, da je ta izdelek narejen v skladu z navedenimi normami in standardi EN IEC 62368-1, ETSI EN 301489-1, ETSI EN 301489-17, ETSI EN 300328 V2.2.2, EN 62479 ter določbami in smernicami 2014/53/EU, 2011/65/EU
(HR) CE- ^2 - Izjava o sukladnosti RED. Pod punom odgovornošću izjavljujemo da je proizvod naveden u naslovu ovog dokumenta sukladan sa primijenjenim normama i normativnim dokumentima : EN IEC 62368-1, ETSI EN 301489-1, ETSI EN 301489-17, ETSI EN 300328 V2.2.2, EN 62479 u skladu sa odredbama preporuka 2014/53/EU, 2011/65/EU
(H) CE-** - Megfelelősegi nyilatkozat RED. Kéziműködtetésü elektromos kéziszerszámok. Teljes felelősségel kijelentége, hogy ezekra temérekter a következő szabványokkal és irányelvekkel összhangban vannak: EN IEC 62368-1, ETSI EN 301489-1, ETSI EN 301489-17, ETSI EN 300328 V2.2.2, EN 62479 és megfelelnek a rendeltetés 2014/53/EU, 2011/65/EU irányelveknek.
(RO) CE- ^ - Declaratie de conformitate RED. Noi declaram pe propria răspundere că acest produs este în conformitate cu următoarele norme și documente normative: EN IEC 62368-1, ETSI EN 301489-1, ETSI EN 301489-17, ETSI EN 300328 V2.2.2, EN 62479 potrivit dispozitiilor directivelor 2014/53/EU, 2011/65/EU

Declaration of conformity CT-3001/STBT

infrastructure for a connected world

(GB) UKCA-'22 - Declaration of conformity. We declare under our sole responsibility that this product is in conformity with the following standards or normative documents:

BS EN 62841-1, BS EN ISO 12100, BS EN ISO 13857, BS EN 28662-1,

BS EN 61000-6-3, BS EN 61000-6-2, BS EN 1037 in accordance with the regulations of directives 2006/42/EG, 2014/30/EU, 2011/65/EU

RED: BS EN IEC 62368-1, EN 301489-1, EN 301489-17, EN 300328 V2.2.2, BS EN 62479 in accordance with the regulations of directives 2014/53/EU, 2011/65/EU

Declaration of conformity CT-3001/STBT

infrastructure for a connected world

Christopher S. Clancy VP, Legal & General Counsel Rangui Corp.

Blackfi n Tools Certifi cate of Calibration

Subject: Panduit BlackFin Series **

The Panduit BlackFin tools have completed the following Testing criteria in the Factory before shipped.

Checklist Final Inspection

1. Final Inspection (type, serial number, product group, etc.)
2. Check head for stop or locking
3. Check the pressure with the housing closed
4. Check if all screws are installed
5. Check whether the machine is "reset"
6. Check if a warning sticker is attached
7. Check whether the inspection sticker is attached
8. Check the cleanliness (oil leakage, case, etc.)
9. Check whether the accessories are complete
10. Check whether the desired test reports are attached (TQ16, etc.)
11. The final inspection is carried out by the Service Center Goods Department

The user of the Panduit product is responsible for verifying suitability of the product for the application and assumes all risk and liability in connection with its use.

Our most important connection is with you.

We have the knowledge and experience to help you make the most of your infrastructure investment.

www.panduit.com

Let's Connect

P: 800-777-3300 :: F: 708-532-1811

www.panduit.com/en/support/contact-us.html

HE.20210_B