GranAroma Deluxe SM6685 - Coffee machine SAECO - Free user manual and instructions

Product type	Automatic espresso machine with grinder
Brand	Saeco
Model	GranAroma Deluxe SM6685
Dimensions (W x H x D)	262 x 383 x 448 mm
Weight	8.3 - 8.8 kg
Power cord length	1200 mm
Water tank capacity	1.8 liters
Bean hopper capacity	300 g
Coffee grounds container capacity	12 doses
Milk container capacity	600 ml
Adjustable dispensing spout height	87 - 147 mm
Power supply	See label on machine (230 V, 50 Hz)
Nominal power	See label on machine (approx. 1450 W)
Wi-Fi connectivity	802.11 b/g/n 2.4 GHz
Main functions	Coffee, espresso, cappuccino, latte macchiato, hot water, steam, CoffeeMaestro (flavor profiles), CoffeeEqualizer Touch (customization), ExtraShot, milk-based beverages
Grinder	Ceramic, 12 adjustable grind settings
Milk system	Integrated cappuccinatore with HygieSteam function (steam cleaning)
Water filter	AquaClean (replace every 3 months or 95 L)
Maintenance and cleaning	Automatic descaling programs, cleaning of the brewing unit, milk circuit cleaning (HygieSteam, Deep Milk Clean)
Spare parts and repairability	Removable brewing unit, water tank, coffee grounds container, drip tray, detachable cappuccinatore, seals and grease available
Safety	Automatic shut-off, overheat detection, child safety (not specified), food-grade materials
General information	Manual available online, software update via Wi-Fi, compatibility with Alexa and Amazon Smart Reorders

Frequently Asked Questions - GranAroma Deluxe SM6685 SAECO

How to connect the machine to Wi-Fi?

Press the Settings icon, scroll to select Wi-Fi, then follow the on-screen instructions. Make sure you are within range of the router (2.4 GHz).

What to do if coffee does not flow or flows slowly?

First check the AquaClean filter: if clogged, replace it. Clean the brewing unit under water and lubricate it if necessary. Set the grind to a coarser setting. Clean the dispensing spout with a pipe cleaner.

How to clean the integrated cappuccinatore?

Use the HygieSteam program via the Status menu. For manual cleaning, disassemble the cappuccinatore (pull down) and rinse all parts under the tap. You can also use the Deep Milk Clean program with the Philips cleaner.

The machine displays error code 01, what to do?

The coffee funnel is clogged. Turn off the machine, remove the brewing unit, open the lid of the pre-ground coffee compartment, and stir the handle of a spoon inside to dislodge the blockage.

How to adjust the water hardness?

Use the provided test strip to measure your water hardness. On the machine, go to Settings > Water hardness and select the corresponding number of red squares.

The milk does not froth, why?

Make sure the cappuccinatore is clean and correctly inserted. Use cold milk (straight from the refrigerator). Check that the milk intake spout is not clogged and that the flexible tube is properly connected.

How to use the ExtraShot function?

Select a beverage, slide the coffee strength bar to maximum, then press the ExtraShot icon. Confirm with the on/off button. Note that you can only prepare one cup at a time.

How often should one descale the machine?

The machine alerts you when descaling is needed. Use only Philips descaling solution. Using the AquaClean filter reduces the frequency of descaling.

How to customize my beverage with CoffeeEqualizer Touch?

After selecting a beverage, the function activates automatically. You can adjust the intensity, coffee/milk/water quantity, temperature, froth, and dispensing order by sliding the bars.

What to do if the coffee grounds container is full but the icon does not appear?

Remove the coffee grounds container, wait at least 5 seconds before putting it back. If the problem persists, clean the container and check that it is properly inserted.

USER MANUAL GranAroma Deluxe SM6685 SAECO

EN USER MANUAL

English 6

Azərbaycanca 25

Čeština 45

Crnogorski 65

Dansk 86

Deutsch 106

Eesti 129

Español 149

Français 170

Hrvatski 191

Italiano 212

Latviešu 234

Lietuviškai 254

Hungarian 274

Dutch 295

Norwegian 316

Uzbek 336

Polish 357

Portuguese 378

Romanian 399

Albanian 419

Slovenian 440

Slovak 460

Serbian 481

Finnish 502

Swedish 522

Turkmen 542

Greek 562

Bulgarian 585

Kyrgyz 607

Macedonian 630

Russian 653

Tajik 677

Ukrainian 700

Kazakh 722

Ruijtntu 743

phosphorus 767

790

Contents

Machine overview (Fig. A) 6

Introduction 7

Adjusting machine settings 11

AquaClean water filter 12

Removing and inserting the brew group 13

Cleaning and maintenance 13

Descaling procedure 16

Error codes 17

Ordering accessories 18

Software updates 18

Troubleshooting 19

Technical specifications 24

Declaration of Conformity 24

Wi-Fi 24

Machine overview (Fig. A)

A1 Lid of bean hopper

A2 Lid of pre-ground coffee compartment

A3 Control panel

A4 Socket for cord

A5 Drip tray

A6 Drip tray release grip

A7 HygieSteam container

A8 HygieSteam cover with milk tube holder

A9 Height-adjustable coffee and milk dispensing spout

A10 Internal cappuccinatore

A11 Power cord with plug

A12 Grind setting knob (to learn more, visit www.saeco.com/care)

A13 Bean hopper

A14 Brew group (to learn more, visit www.saeco.com/care)

A15 Service door

A16 Water tank

A17 Coffee grounds container

A18 Front panel of coffee grounds container

A19 Drip tray cover

A20 'Drip tray full' indicator

Accessories

A21 Milk container

A22 Milk tube

A23 Cleaning brush

A24 Grease tube

A25 AquaClean filter

A26 Measuring spoon

A27 Water hardness test strip

Control panel

Refer to figure B for an overview of all icons. Below you can find the descriptions.

B1 On/off icon

B2 Drinks

B3 Drinks menu

B4 Personal profiles

B5 Machine settings

B6 Status menu

B7 Shop

B8 Start/stop icon

Introduction

Congratulations on your purchase of a Saeco full-automatic coffee machine! To fully benefit from the online support that Saeco offers, you can use the control panel to register your machine via the built-in Wi-Fi connection, or go to www.saeco.com/MyCoffeeMachine and register your product there.

Read the separate safety booklet carefully before you use the machine for the first time and save it for future reference.

Your Saeco full-automatic coffee machine allows you to connect with your Wi-Fi network to enhance your coffee experience.

By connecting your machine to your Wi-Fi network, you will be able to:

• enjoy regular software updates to enhance your user experience
• make use of the shop functionality, if available in your country
• you can link your machine to your Amazon account for accessory replenishment, if this option is available in your country
• connect to your Alexa home device to make use of voice control, if available in your country

Note: This machine has been tested with coffee. Although it has been carefully cleaned, there may be some coffee residues left. We guarantee, however, that the machine is absolutely new.

Switching on the machine

Tap the 'on' icon and follow the step-by-step instructions on the control panel.

⚠️ Please connect and update the machine at first installation and regularly check for manual updates.

Connecting to Wi-Fi

Connect your coffee machine to a 2.4 GHz 802.11 b/g/n home Wi-Fi network.

i Connecting your coffee machine to your home Wi-Fi network provides you with an enhanced user experience.

i Make sure that the coffee machine and the Wi-Fi router are within range of each other.

Follow the steps below to connect your coffee machine to your Wi-Fi network.

1. Tap the Settings icon and swipe from left to right to find the Wi-Fi icon.

2. Tap the Wi-Fi icon.

3. Follow the steps on the screen to connect your machine to your Wi-Fi network.

You are now ready to start your connected experience.

The machine will perform the automatic rinsing cycle when it is switched on and off via voice control and when the machine has been inactive for a while and switches off. Please make sure that the environment of the machine is safe.

Special functions

Special function Purpose

	With CoffeeMaestro you can personalize your coffee by selecting a pre-set taste profile (Delicato, Intenso, Forte) for your beverage instead of changing the settings yourself.
	HygieSteam function automatically cleans the milk system, removing microorganisms: use it after brewing cappuccino or other milk-based drinks.
	Our durable grinder is made from 100% ceramic to be exceptionally hard and precise. It can be adjusted to your taste with 12-step levels.
	The Maintenance Dashboard gives you a helpful overview and notifies you with status information on things like that the AquaClean is running low.

Brewing drinks

General steps

To brew a drink, you need to follow a few simple steps.

1. Fill the water tank with tap water and fill the bean hopper with beans.

2. Place one or two cups under the height-adjustable dispensing spout. Slide the dispensing spout up or down to adjust the height to the size of the cup or glass you are using.

3. Tap the Drinks icon to enter the 'Drinks' menu. Swipe from left to right to select your drink by tapping on it.

- Tap the '2x' icon if you want to brew two cups. The machine automatically carries out two grinding cycles in sequence of the selected drinks.

i The '2x' icon is not available for all drinks.

4. After selecting a drink you can adjust the settings to your preference by swiping the adjustable bars up and down. 5. Press the start/stop icon to start brewing the selected drink.

Do not use caramelized or flavored coffee beans.

Support on drink parameters

To get additional information about a specific drink parameter, press and hold an item for 3 seconds.

Brewing milk-based drinks

To brew milk-based drinks, you need to follow a few simple steps.

1. Fill the water tank with tap water and fill the bean hopper with beans. 2. Unscrew the lid of the milk container and fill the milk container with milk.

Always use milk coming directly from the fridge for optimal results.

3 Connect the flexible milk tube to the cappuccinatore. 4 Place the metal milk tube in the container. 5 Tap the Drinks icon, scroll and select the milk-based drink icon of your choice. 6 You can adjust the settings to your preference by swiping the adjustable bars up and down. 7 Press the start/stop icon at any time to start brewing the selected drink.

• For specific drinks, the machine first dispenses milk and then coffee. For a number of other drinks this is the other way around, the machine will first dispense coffee and then milk.
• To stop dispensing milk before the machine has dispensed the preset amount, press the start/stop icon.
• To stop dispensing the complete drink (milk and coffee) before the machine is finished, press and hold the start/stop icon.

Directly after dispensing the milk, the 'HygieSteam Shot' is performed. The machine shoots steam through the internal milk system to rinse it quickly. The metal part of the milk tube may become hot. To avoid the risk of burns, let it cool down first.

Tip: You can also use a regular milk carton to brew your milk-based drinks. Place the metal milk tube directly into the milk carton.

Brewing coffee with pre-ground coffee

To brew coffee with pre-ground coffee, you need to follow a few simple steps.

1 Open the lid of the pre-ground coffee compartment and pour one measuring spoon of pre-ground coffee into it. Then close the lid. 2 Tap the Drinks icon, scroll from left to right and select your drink. 3 Tap the pre-ground coffee icon. 4 You can adjust the settings to your preference by swiping the adjustable bars up and down. 5 Press the start/stop icon to start brewing the selected drink.

i If you select pre-ground coffee, you cannot adjust the coffee strength or brew more than one drink at the same time.

Dispensing hot water

1 Make sure that the internal cappuccinatore is correctly attached to the machine (Fig. 1). 2 Place a cup under the spout. 3 Tap 'Hot Water' (Fig. 2). 4 Slide the adjustable bars up and down to adjust the hot water quantity or temperature to your preference (Fig. 3). 5 Press the start/stop icon. 6 To stop dispensing hot water before the machine is finished, press the start/stop icon again.

Personalization

The machine allows you to adjust the settings of a drink to your own preference and to store the adjusted drink in a personal profile. You can choose your own icon and your own profile name.

Speed up with CoffeeMaestro

Your machine offers the possibility to select taste profiles instead of adjusting all settings separately with the CoffeeMaestro function. You can choose between Delicato, Intenso and Forte. To select a CoffeeMaestro taste profile:

1. Tap the drink icon of your choice (Fig. 4). 2. Tap the CoffeeMaestro icon repeatedly (Fig. 5). - The main settings of the drink are now adjusted accordingly.

3. Press the start/stop ▶ icon to start brewing the drink.

Personalize your drink with the CoffeeEqualizer Touch function

After selecting a drink, the CoffeeEqualizer Touch function is activated automatically, allowing you to adjust the drink settings. Long press on each of the items on the display to activate the help function and receive further information.

With the CoffeeEqualizer Touch function you can adjust the following settings:

1. Aroma strength 5. Drink temperature 2. Coffee quantity 6. Foam amount 3. Milk quantity 7. You can also decide to prepare 1 or 2 cups 4. Water quantity 8. The order of first dispensing coffee or milk

Note: It depends on the drink you choose which settings you can adjust.

Save your favorite drinks in a profile

The machine allows you to adjust the settings of a drink to your own preference and to store the adjusted drink in a personal profile. You can select a profile and store a recipe using the profiles.

You can create a profile and add a drink using the profile icon.

1. Tap the profile icon on the main menu (Fig. 6). 2. Tap the Plus icon (Fig. 7). 3. Type your name and select your favorite icon. 4. You are ready to add a drink. Tap the drink icon of your choice. 5. Personalize the drink via the CoffeeEqualizer Touch or the CoffeeMaestro function. 6. Tap on the 'Save to profile' icon to store it in your personal profile (Fig. 8).

Extra shot (ExtraShot)

Your machine offers you the possibility to add an extra shot of Ristretto to your coffee and milk drinks, for example if you want to have a stronger coffee.

1. Place a cup under the spout. 2. Tap one of the one-touch drinks icons to select a drink (Fig. 4). 3. Slide the adjustable bar up to set the strength to the top level and select the ExtraShot function (Fig. 9). 4. Then press the start/stop icon to start brewing the drink. 5. To stop dispensing the drink before the machine has finished, press the start/stop ▶■ icon again.

When you have selected the ExtraShot function, you can only brew one coffee at a time.

Note: The extra shot function is not available for all drinks.

Adjusting machine settings

You can adjust most machine settings by tapping the Settings icon and following the steps on the screen.

For online support (frequently asked questions, movies, etc.), scan the QR code on the cover of this booklet or visit www.saeco.com/care

Setting the water hardness

We advise you to adjust the water hardness setting to the water hardness level in your region for optimal performance and a longer lifetime of the machine. This also prevents you from having to descale the machine too often. The default water hardness setting is 4: hard water.

Use the water hardness test strip supplied in the box to determine the water hardness in your region:

1. Immerse the water hardness test strip in tap water or hold it under the tap for 1 second (Fig. 10). 2. Wait 1 minute. The number of squares on the test strip that turn red indicate the water hardness (Fig. 11).

Set the machine to the correct water hardness:

1. Tap the Settings icon and scroll from left to right to select 'Water hardness'.

2. Select the water hardness level. The number of red squares selected on the display should be the same as the number of red squares on the test strip (Fig. 12). 3. When you have set the correct water hardness, tap the confirmation icon to confirm.

Adjusting the grind setting

You can change the coffee strength with the grind setting knob inside the bean container. The lower the grind setting, the finer the coffee beans are ground and the stronger the coffee becomes. There are 12 different grind settings you can choose from.

The machine has been set up to get the best taste out of your coffee beans. Therefore we advise you not to adjust the grind setting until you have brewed 100-150 cups (approx. 1 month of use).

You need to brew 2 to 3 drinks before you can taste the full difference.

Do not turn the grind setting knob more than one notch at a time to prevent damage to the grinder.

1. Tap the Settings icon in the main menu. 2. Tap on "Grinder". 3. Watch the how-to video.

Restoring factory settings

The machine offers you the possibility to restore the factory settings at any moment.

1. Tap the Settings icon. 2. Scroll from left to right to select 'Factory settings'. Confirm by tapping the confirmation √ icon. - The settings are now restored. Note: The following factory settings are restored to default: water hardness, standby time, display brightness, sound, front illumination, profiles, measure/units, home screen settings, Wi-Fi credentials, software update preferences, Saeco credentials, Amazon credentials.

AquaClean water filter

Your machine is AquaClean enabled. You can place the AquaClean water filter in the water tank to preserve the taste of your coffee. It also diminishes the need for descaling by reducing limescale build-up in your machine. You can purchase an AquaClean water filter from your local or online retailer or from authorized service centers.

AquaClean filter status indication

The status of the AquaClean filter is always visible in the 'Status' menu as a percentage.

• If the status of the AquaClean filter is 10% or less, the screen shows a message for 2 seconds each time you switch on the machine. This message advises you to buy a new filter.
• If the status of the filter is 0%, the machine asks you to replace the AquaClean filter every time you switch on the machine.

Activating the AquaClean water filter (5 min.)

Note: The machine does not automatically detect that a filter has been placed in the water tank. Therefore you need to activate each new AquaClean water filter that you install in the 'Status' menu. When the machine stops showing the filter activation message, you can still activate an AquaClean water filter, but you will need to descale the machine first. Your machine has to be completely limescale-free before you start using the AquaClean water filter.

Before activating the AquaClean water filter, it has to be prepared by soaking it in water as described below. If you don't do this, air might be drawn into the machine instead of water, which makes a lot of noise and prevents the machine from being able to brew coffee.

1 Tap the 'Status' icon and scroll from left to right to select 'AquaClean'. 2 Tap the confirmation √ icon again when the activation screen appears. Follow the instructions on the screen.

Replacing the AquaClean water filter (5 min.)

After 95 liters of water have flowed through the filter, the filter will cease to work. The AquaClean status indicator drops to 0% to remind you to replace the filter. If you do not replace the AquaClean water filter in time, you can still replace the filter but you first need to descale the machine.

When the AquaClean status indicator drops to 0% or when the machine reminds you to replace the AquaClean filter:

1 take out the old AquaClean water filter. 2 install a new filter and activate it as described in chapter 'Activating the AquaClean water filter (5 min).' i Replace the AquaClean water filter at least every 3 months, even if the machine does not yet indicate that replacement is required.

Removing and inserting the brew group

Go to the 'Status' menu on the screen and select 'Brew group clean' or visit www.saeco.com/care for detailed video instructions on how to remove, insert and clean the brew group.

Removing the brew group from the machine

1 Remove the water tank and open the service door (Fig. 13).

2 Press the PUSH handle (Fig. 14) and pull at the grip of the brew group to remove it from the machine (Fig. 15).

When you remove the brew group from the machine, make sure to empty the drip tray and the coffee grounds container.

Reinserting the brew group

Before you slide the brew group back into the machine, make sure it is in the correct position.

1 Check if the brew group is in the correct position. The arrow on the yellow cylinder on the side of the brew group has to be aligned with the black arrow and N (Fig. 16). - If they are not aligned, push down the lever until it is in contact with the base of the brew group (Fig. 17). 2 Slide the brew group back into the machine along the guiding rails on the sides (Fig. 18) until it locks into position with a click (Fig. 19). Do not press the PUSH button. 3 Close the service door and place back the water tank.

Cleaning and maintenance

Your machine will advise you when to perform cleaning and maintenance.

Regular cleaning and maintenance keeps your machine in top condition and ensures good-tasting coffee for a long time with a steady coffee flow.

Consult the table below for a detailed description of when and how to clean all detachable parts of the machine. You can find more detailed information and video instructions on www.saeco.com/care. See figure C for an overview of which parts can be cleaned in the dishwasher.

Item When to clean How to find in the control panel/

What to do

AquaClean filter When the machine asks you or every three months.	STATUS->CLEANING->AQUACLEAN. Follow the steps to activate the AquaClean filter.
i The machine does not automatically detect that a filter has been placed in the water tank. Therefore you need to activate each new AquaClean filter that you install in the 'Status' menu.
i Your machine has to be completely limescale-free before you start using the AquaClean filter.
i Replace the AquaClean filter at least every 3 months, even if the machine does not yet indicate that replacement is required.
Brew group Weekly STATUS -> PERFORMANCE ->BREW GROUP
	CLEAN. Follow the steps to remove and clean the brew group.
i When you remove the brew group from the machine, make sure to empty the drip tray and the coffee grounds container.
i Before you slide the brew group back into the machine, make sure it is in the correct position.The arrow on the yellow cylinder on the side of the brew group has to be aligned with the black arrow and N (Fig. 16).
Monthly STATUS -> PERFORMANCE ->COFFEE OIL
	REMOVAL. Follow the steps of the self-cleaning process to automatically remove coffee oil residues from the brew group.
Milk system/internal cappuccinatore	After every day of use STATUS -> HYGIESTEAM. Follow the steps of the self-cleaning process to clean the milk system. Wipe the outside of the metal milk tube with a damp cloth before placing it into the milk tube holder.
Weekly Remove and disassemble the internal cappuccinatore. Rinse all parts under the tap with some washing-up liquid.
Monthly STATUS -> HYGIESTEAM -> DEEP MILK CLEAN. Follow the steps of the self-cleaning process to clean the milk system.
Milk container Weekly Disassemble the milk container (Fig. 20) and push out the ball using the pin of the milk tube (Fig. 21). Clean all parts of the milk container under the tap or in the dishwasher.
HygieSteam container (milk tube holder)	Weekly or when the machine reminds you Remove the HygieSteam container from the machine (Fig. 22) and remove the HygieSteam cover (Fig. 23). Clean the HygieSteam container and cover under the tap or in the dishwasher. Let the container and cover air-dry and place them back into the machine.

Item When to clean How to find in the control panel/

		What to do
Pre-ground coffee compartment	Check the pre-ground coffee compartment weekly to see if it is clogged	Unplug the machine and remove the brew group. Open the lid of the pre-ground coffee compartment and insert the spoon handle into it. Move the handle up and down until the clogged ground coffee falls down (Fig. 24). Go to www.saeco.com/care for detailed video instructions.
Coffee grounds container	Empty the coffee grounds container when prompted by the machine. Clean it weekly	Remove the coffee grounds container while the machine is switched on. Clean it under the tap with some washing-up liquid or in the dishwasher.Note: The front panel of the coffee grounds container is not dishwasher proof.
Drip tray Empty the drip tray daily or as soon as the red 'drip tray full' indicator pops up through the drip tray (Fig. 25). Clean the drip tray weekly		Remove the drip tray (Fig. 26) and clean it under the tap with some washing-up liquid or in the dishwasher.
Lubrication of the brew group	Every 2 months Lubricate the brew group with the by-packed grease (see 'Lubricating the brew group'). Go to www.saeco.com/care for detailed video instructions.
Water tank Weekly Rinse the water tank under the tap.
Machine front Weekly Clean with a non-abrasive cloth.
Descaling of the machine	When the machine asks you to descale	STATUS -> DESCALING. Follow the steps to descale the machine. When descaling is needed, the machine asks you to descale it, press the OK icon to start and follow the steps.

Cleaning the brew group

Regular cleaning of the brew group prevents coffee residues from clogging up the internal circuits. Go to the 'Status' menu on the screen and select 'Brew group clean' or visit www.saeco.com/care for support videos on how to remove, insert and clean the brew group.

Cleaning the brew group under the tap

1 Tap the 'Status' icon and scroll to select 'Brew group clean'. 2 Tap the confirmation icon to confirm and then follow the instructions on the screen.

Cleaning the brew group with the coffee oil remover tablets

Only use Philips coffee oil remover tablets.

1 Tap the 'Status' icon and scroll to select 'Brew group clean'. 2 Tap the confirmation icon to confirm and then follow the instructions on the screen.

Lubricating the brew group

To improve your machine's performance, we suggest that you lubricate the brew group every 2 months, to ensure that the moving parts continue to move smoothly.

1 Apply a thin layer of grease on the piston (grey part) of the brew group (Fig. 27). 2 Apply a thin layer of grease around the shaft (grey part) in the bottom of the brew group (Fig. 28). 3 Apply a thin layer of grease to the guiding rails on both sides (Fig. 29).

Cleaning programs for the internal cappuccinatore

The machine tells you when to clean the internal cappuccinatore.

The machine has three programs to clean the internal cappuccinatore:

• 'HygieSteam Shot': during the preparation of a milk-based drink, the machine automatically shoots steam through the internal cappuccinatore to rinse it quickly.
• 'HygieSteam': the machine thoroughly cleans the internal milk system with steam. Make sure that the HygieSteam container is correctly assembled (Fig. 30) and attached to the machine (Fig. 31). Place the milk tube in the milk tube holder (Fig. 32) and follow the instructions on the screen.
• 'Deep Milk Clean': Perform the 'Deep Milk Clean' procedure with the Philips milk circuit cleaner for a thorough cleaning of the internal milk system.

Cleaning the internal cappuccinatore under the tap

1 Open the door of the internal cappuccinatore (Fig. 33). 2 Remove the internal cappuccinatore by pulling it down (Fig. 34). 3 Disassemble the internal cappuccinatore by pulling the bottom part off the top part (Fig. 35). 4 Disassemble all parts (Fig. 36) and clean them under the tap. 5 Reassemble the internal cappuccinatore. 6 To place back the internal cappuccinatore, put it in upright position and make sure the holes are aligned with the two tubes on the machine. Then move the internal cappuccinatore upwards until it locks into place (Fig. 1). 7 Close the door.

Visit www.saeco.com/care for detailed video instructions.

Descaling procedure

Please use Philips descaler only. Under no circumstances should you use a descaler based on sulfuric acid, hydrochloric acid, sulfamic or acetic acid (vinegar) as this may damage the water circuit in your machine and will not dissolve the limescale properly. Not using the Philips descaler will void your warranty. Failure to descale the appliance will also void your warranty. You can buy Philips descaler from your local or online retailer or from authorized service centers.

1 When the machine asks you to descale it, tap the confirmation √ icon to start. To start descaling without being prompted by the machine, tap the 'Status' icon and select 'Descale'. 2 Remove the drip tray, the coffee grounds container and the HygieSteam container (Fig. 22), empty them and put them back into place. 3 Remove the water tank and empty it. Then remove the AquaClean filter. 4 Pour the whole bottle of Philips descaler into the water tank and then fill it with water up to the CALC CLEAN level (Fig. 37). Then place the water tank back into the machine. 5 Place a large container (1.5 l) under the coffee dispensing spout. 6 Make sure that the HygieSteam container is correctly assembled (Fig. 30) and attached to the machine (Fig. 31). Place the milk tube in the milk tube holder.

7 Follow the instructions on the screen to start the descaling procedure. The descaling procedure lasts approx. 30 minutes and consists of a descaling cycle and a rinsing cycle. 8 Once the descaling cycle is finished, you need to rinse the water tank and water circuit. Follow the instructions on the screen. 9 Place a new AquaClean filter in the water tank and activate it (see 'Activating the AquaClean water filter (5 min).').

Tip: Using the AquaClean filter reduces the need for descaling!

What to do if the descaling procedure is interrupted

You can exit the descaling procedure by pressing the on/off icon on the control panel. If the descaling procedure is interrupted before it is completely finished, some descaling liquid may remain in the water tank or the water circuit. In that case, do the following:

1 Empty and rinse the water tank thoroughly. 2 Fill the water tank with fresh water up to the CALC CLEAN level indication and switch the machine back on. The machine will heat up and perform an automatic rinsing cycle. 3 Before brewing any drinks, perform a manual rinsing cycle. To perform a manual rinsing cycle, first dispense half a water tank of hot water and then brew 2 cups of pre-ground coffee without adding ground coffee.

Note: If the descaling procedure was not completed, the machine will require another descaling procedure as soon as possible.

Error codes

Below you find a list of the error codes showing problems that you can solve yourself. Video instructions are available on www.saeco.com/care. If another error code appears, please contact the Consumer Care Center in your country. For contact details, see the warranty leaflet.

Error code Problem Possible solution

01 The coffee funnel is clogged.	Switch off the machine and unplug it. Remove the brew group. Then open the lid of the pre-ground coffee compartment and insert the spoon handle. Move the handle up and down until the clogged ground coffee falls down. Visit www.saeco.com/care for detailed video instructions.
03 The brew group is dirty or not well-greased.	Switch off the machine. Rinse the brew group with fresh water, let it air-dry and then lubricate it (see 'Lubricating the brew group'). Consult chapter 'Cleaning the brew group' or visit www.saeco.com/care for detailed video instructions. Then switch the machine on again.
04 The brew group is not positioned correctly.	Switch off the machine. Remove the brew group and reinsert it. Make sure that the brew group is in the correct position before you insert it. Consult chapter 'Handling the brew group' or visit www.saeco.com/care for detailed video instructions. Then switch the machine on again.
05 There is air in the water circuit.	Restart the machine by switching it off and on again. If this works, dispense 2-3 cups of hot water. Descale the machine if you have not done so for a longer period of time.

Error code Problem Possible solution

	The AquaClean filter was not prepared properly before installation or it is clogged.	Remove the AquaClean filter and try to brew a coffee again. If this works, make sure that the AquaClean filter is prepared properly before you place it back (see 'Activating the AquaClean water filter (5 min.)'). Put the AquaClean filter back into the water tank. If this still does not work, the filter might be clogged and needs to be replaced.
11	The machine needs to adjust to room temperature	Allow some time for the machine to adjust from transport/outdoor temperature to room temperature. Switch off the machine for 30 minutes and switch it on again. If this does not work, contact the Consumer Care Center in your country. For contact details, see the warranty leaflet.
14	The machine is overheated.	Switch off the machine and switch it back on after 30 minutes.
19	The machine is not connected to the wall socket properly.	Make sure that the small plug of the power cord is properly connected to the socket on the back of the machine.

Ordering accessories

To clean and descale the machine, only use Philips maintenance products. These products can be purchased by enabling Amazon Smart Reorders, from your local or online retailer or from authorized service centers.

To be able to use Amazon Smart Reorders, you first need to activate this service on Amazon. Then follow the steps on the screen of your machine to connect your Amazon account to your Saeco account. After you have completed these steps, you can use the Amazon Smart Reorder service. In the 'Shop' menu on the control panel of the machine you can view the availability of Philips maintenance products and accessories at local retailers.

To find a full list of spare parts online, enter the type number of your machine. You can find the type number on the inside of the service door.

Maintenance products and type numbers:

• Descaling solution CA6700
• AquaClean filter CA6903
• Brew group grease HD5061
• Coffee oil remover tablets CA6704
• Milk circuit cleaner CA6705
• Maintenance kit CA6707

Software updates

Updating is essential to safeguard your privacy and proper functioning of your coffee machine. You can set whether you want to update your machine manually or whether you want it to be done automatically.

When you have selected automatic updates, make sure that the machine is also plugged in at night and Wi-Fi is enabled, so that the machine can receive the software updates overnight. i Updates are made available when there are software improvements, new features for the machine and to prevent a possible security issue.

i Mandatory firmware updates are started automatically when the coffee machine is in stand-by mode. During a firmware update the coffee machine cannot be used.

Troubleshooting

This chapter summarizes the most common problems you could encounter with the machine. Support videos and a complete list of frequently asked questions are available on www.saeco.com/care. If you are unable to solve the problem, contact the Consumer Care Center in your country. For contact details, see the warranty leaflet.

Problem Cause Solution

There are some coffee residues inside my new coffee machine.	This machine has been tested with coffee.	Although it has been carefully cleaned, there may be some coffee residues left. However, the machine is absolutely new.
The machine is in DEMO mode.	You pressed the standby icon for more than 8 seconds.	Switch the machine on and off by unplugging the power cord and then plugging it in again.
The drip tray fills up quickly / there is always some water in the drip tray.	This is normal. The machine uses water to rinse the internal circuit and brew group. Some water flows through the internal system directly into the drip tray.	Empty the drip tray daily or as soon as the red 'drip tray full' indicator pops up through the drip tray cover. Tip: place a cup under the dispensing spout to collect rinsing water that comes out of it.
The 'empty coffee grounds container' icon remains on.	You emptied the coffee grounds container while the machine was unplugged from the wall socket, or you placed it back too fast.	Remove the coffee grounds container, wait at least 5 seconds and then insert it again.
The machine prompts to empty the coffee grounds container even though the container is not full.	The machine did not reset the counter the last time you emptied the coffee grounds container.	Always wait approx. 5 seconds when you place back the coffee grounds container. In this way, the coffee pucks counter will be reset to zero and the number of coffee pucks is counted correctly.
The coffee grounds container is too full and the 'empty coffee grounds container' icon did not appear on the display.	You removed the drip tray without emptying the coffee grounds container.	When you remove the drip tray, also empty the coffee grounds container even if it contains only a few coffee pucks. This ensures that the coffee pucks counter is reset to zero and that the number of coffee pucks is counted correctly.
I cannot remove the brew group.	The brew group is not in the correct position.	Reset the machine in the following way: close the service door and place back the water tank. Switch the machine off and back on again and wait for the lights in the drink icons to come on. Try to remove the brew group again. See chapter 'Removing and inserting the brew group' for step-by-step instructions.

Problem Cause Solution

I cannot insert the brew group.	The brew group is not in the correct position.	Reset the machine in the following way: close the service door and place back the water tank. Leave the brew group out. Switch off the machine and unplug it. Wait for 30 seconds and then plug the machine back in, switch it on and wait for the lights in the drink icons to come on. Then put the brew group in the correct position and reinsert it into the machine. See chapter 'Removing and inserting the brew group' for step- by-step instructions.
The coffee is watery. The brew group is dirty or needs to be lubricated.		Remove the brew group, rinse it under the tap and leave it to dry. Then lubricate the moving parts (see 'Lubricating the brew group').
	The machine is performing its self-adjustment procedure. This procedure is started automatically when you use the machine for the first time, when you change to another type of coffee beans or after a long period of non-use.	Brew 5 cups of coffee initially to allow the machine to complete its self-adjustment procedure.
	The grinder is set to a too coarse setting.	Set the grinder to a finer (lower) setting. Brew 2 to 3 drinks to be able to taste the full difference.
The coffee is not hot enough.	The temperature is set too low. Set the temperature to the maximum setting (Fig. 38).
	A cold cup reduces the temperature of the drink.	Preheat the cups by rinsing them with hot water.
Adding milk reduces the temperature of the drink.		Regardless of whether you add hot or cold milk, adding milk always reduces the temperature of the coffee. Preheat the cups by rinsing them with hot water.
Coffee does not come out or coffee comes out slowly.	The AquaClean water filter was not prepared properly for installation.	Remove the AquaClean filter and dispense some hot water. If this works, the AquaClean filter was not installed properly. Reinstall and activate the AquaClean filter and follow all steps in chapter 'AquaClean water filter'.
		After a long period of non-use, you need to prepare the AquaClean water filter for use again and dispense 2-3 cups of hot water.
	The AquaClean water filter is clogged.	Replace the AquaClean water filter every 3 months. A filter that is older than 3 months can become clogged.

Problem Cause Solution

The grinder is set to a too fine setting.	Set the grinder to a coarser (higher) setting. Note that this will impact the coffee taste.
The brew group is dirty. Remove the brew group and rinse it under the tap (see 'Cleaning the brew group under the tap').
The coffee dispensing spout is dirty.	Clean the coffee dispensing spout and its holes with a pipe cleaner or needle.
The pre-ground coffee compartment is clogged	Switch off the machine and remove the brew group. Open the lid of the pre-ground coffee compartment and insert the spoon handle into it. Move the handle up and down until the clogged ground coffee falls down (Fig. 24).
The machine circuit is blocked by limescale.	Descale the machine with Philips descaler (see 'Descaling procedure'). Always descale when the machine prompts you.
The milk does not froth. The internal cappuccinatore is dirty or not inserted correctly.	Clean the internal cappuccinatore and make sure that you position and insert it correctly (see 'Cleaning the internal cappuccinatore under the tap').
The type of milk used is not suitable for frothing.	Different types of milk result in different amounts of froth and different froth qualities.
The milk is splashing. The milk you use is not cold enough.	Make sure you use cold milk coming directly from the fridge.
The flexible milk tube is not connected properly.	Open the door of the coffee dispensing spout (Fig. 33) and check if the flexible milk tube is fully connected to the cappuccinatore (Fig. 39). Note that the cappuccinatore and milk tubes may be hot. Let the cappuccinatore and the tubes cool down before you touch them.
The cappuccinatore and milk tubes are not clean.	Remove and disassemble the internal cappuccinatore (see 'Cleaning the internal cappuccinatore under the tap'). Rinse all parts under the tap. For thorough cleaning, use Philips milk circuit cleaner and perform the Deep Milk Clean procedure via the 'Status' and 'Hygiesteam' menu. Note that if the parts have been cleaned in the dishwasher, they may have become clogged by food particles or detergent residues. A visual check that they are not obstructed is also recommended.

Problem Cause Solution

		We advise you to perform the HygieSteam program every day: 1) Press 'Status' on the control panel. 2) Select 'HygieSteam'. 3) Then confirm all steps on the display.
	The milk tubes are clogged. Always store the milk container without the milk tubes in the refrigerator. Leftover milk could accumulate inside the milk tubes and block the flow of milk through the tubes. Rinse the milk tubes before storage.
The machine seems to be leaking.	The machine uses water to rinse the internal circuit and brew group. This water flows through the internal system directly into the drip tray. This is normal.	Empty the drip tray every day or as soon as the 'drip tray full' indicator pops up through the drip tray cover. Tip: Place a cup under the dispensing spout to collect rinsing water and reduce the amount of water in the drip tray.
	The drip tray is too full and has overflowed which makes it look like the machine is leaking.	Empty the drip tray every day or as soon as the 'drip tray full' indicator pops up through the drip tray cover.
	The water tank is not fully inserted, some water is leaking out of the water tank and air is drawn into the machine.	Make sure the water tank is in the correct position: remove it and reinsert it into the machine as far as possible.
	The brew group is dirty/clogged. Rinse the brew group.
	The machine is not placed on a horizontal surface.	Place the machine on a horizontal surface so that the drip tray does not overflow and the 'drip tray full' indicator works properly.
I cannot activate the AquaClean water filter and the machine asks for descaling.	The filter has not been installed or replaced in time after the screen showed the AquaClean reminder. This means your machine is not completely free of limescale anymore.	Descale your machine first and then install the AquaClean water filter.
The new water filter does not fit.	You are trying to install another filter than the AquaClean water filter.	Only the AquaClean water filter fits into the machine.
	The rubber ring on the AquaClean water filter is not in place.	Place back the rubber ring on the AquaClean water filter.
The machine is making a loud noise.	It is normal that your machine makes some noise during use.	If the machine starts to make a different kind of noise, clean the brew group and lubricate it (see 'Lubricating the brew group').

Problem Cause Solution

	The AquaClean water filter was not prepared properly and air is now drawn into the machine.	Remove the AquaClean water filter from the water tank and prepare it for use properly before you place it back. See chapter 'AquaClean water filter' for step-by-step instructions.
	The water tank is not fully inserted and air is drawn into the machine.	Make sure the water tank is in the correct position: remove it and reinsert it by pushing it into the machine as far as possible.
When I try to connect the machine to Wi-Fi for the first time, the machine cannot connect to the Wi-Fi network.	Your Wi-Fi name and password are not correct.	Check your Wi-Fi name and password.
	The coffee machine and the Wi-Fi router are not within range of each other.	Ensure that the coffee machine and the Wi-Fi router are within range of each other.or use a Wi-Fi repeater.
The machine is not able to find the home Wi-Fi network.	The Wi-Fi router is not working properly.	Please make sure that the Wi-Fi router is working properly and is connected to the internet.
	The machine is not within range of the router.	Make sure the machine is within range of the router. You can also use a Wi-Fi signal repeater.
	The router your coffee machine is trying to connect to is 5 GHz dual-band and your coffee machine is not trying to connect to a 2.4 GHz network.	5 GHz networks are not supported.Temporarily switch off the 5 GHz band in your router and try to pair your coffee machine again to another band of the same router (2.4 GHz). Switch on your 5 GHz band again after successful pairing
I cannot use Alexa and Amazon Smart Reorders yet.	You have not yet connected to your Amazon to your Saeco account.	Please follow the instructions on the control panel of the machine to connect your Amazon account to your Saeco account to be able to use Alexa voice control and Amazon Smart Reorders.Note: To be able to use these features you need to have an Alexa app or an Alexa device and you need to enable the Smart Reorders service on Amazon.
The Wi-Fi connectivity of the machine used to work but is not working anymore.	Your Wi-Fi name and/or password has changed.	Follow the instructions of section 'Connecting to Wi-Fi' and choose the network with the new Wi-Fi name to connect to.
	The Wi-Fi password has changed.	Follow the instructions of section 'Connecting to Wi-Fi' and enter the new Wi-Fi password.

Problem Cause Solution

	Your Wi-Fi router is not working properly.	Check the router and make sure it is working.
	The Wi-Fi connectivity can be interrupted by electromagnetic or other interferences.	Keep the appliance away from other electronic devices that may cause interferences.
	None of the solutions mentioned above work.	Switch off the machine and unplug it, then plug the machine back in and switch it on to recheck the Wi-Fi connection.

Technical specifications

The manufacturer reserves the right to improve the technical specifications of the product. All the preset quantities are approximate.

Description Value

Size (w x h x d) 262 x 383 x 448 mm

Weight 8.3 - 8.8 kg

Power cord length 1200 mm

Water tank 1.8 liters

Bean hopper capacity 300 g

Coffee grounds container capacity 12 pucks

Milk container capacity 600 ml

Height-adjustable spout height 87 - 147 mm

Nominal voltage - Power rating - Power supply See data label on inside of service door

Wi-Fi frequency band 2.4 GHz 802.11 b/g/n

Declaration of Conformity

Hereby, DAP B.V. declares that the fully automatic espresso machines SM6685, SM6682 and SM6680 are in compliance with Directive 2014/53/EU.

The full text of the EU declaration of conformity is available at the following internet address:

https://www.saeco.com.

The fully automatic espresso machines SM6685, SM6682 and SM6680 are equipped with a Wi-Fi module, 2.4 GHz 802.11 b/g/n (channels 1..13). Maximum transmitting power <100 mW (20 dBm).

Wi-Fi

The machine is a networked equipment, in compliance with reg. (EU) No 801/2013, and it is intended to be used permanently connected to a 2.4 GHz 802.11 b/g/n network.

A7 HygieSteam posuda

Connect and update the appliance during initial installation and regularly check for manual updates.

1 Tap the Settings ⚙ icon and swipe from left to right to find the "Wi-Fi" icon. 2 Tap the "Wi-Fi" icon.

3 Follow the on-screen steps to connect the appliance to the Wi-Fi network.

You are now ready to start working in a connected environment.

The appliance will perform an automatic rinse cycle when it is turned on and off via voice control and if it has been inactive for some time, so it turns off. Make sure the area around the appliance is safe.

Special functions

1 Fill the water tank with tap water and fill the coffee bean container with coffee beans.

2 Place one or two cups under the dispensing spout, which is adjustable in height. Slide the dispensing spout up or down to adjust its height to the size of the cup or glass you are using.

3 Tap the Drinks 🚙️ icon to access the "Drinks" menu. Swipe from left to right and select a drink by tapping it.

- Tap the "2x" icon if you want to brew two cups. The appliance automatically performs two grinding cycles in a row for selected drinks.

Brewing milk-based drinks

To make milk-based drinks, you need to follow a few simple steps.

COFFEE OIL REMOVAL

Follow the self-cleaning process steps to automatically remove coffee oil traces from the brewing unit.

Item When to clean How to find it on the control panel/

B2 Drinks

B3 Drinks menu

B4 Personal profiles

B8 Start/stop icon

Connect and update the device at first installation and regularly check for manual updates.

1 Tap the Settings icon ⚙️ and swipe from left to right to find the Wi-Fi icon. 2 Tap the Wi-Fi icon.

3 To connect the device to a Wi-Fi network, follow the on-screen steps. You are ready to start connecting.

1 Fill the water tank with tap water and fill the bean hopper with coffee beans.

Extra shot

A7 HygieSteam container

A8 HygieSteam lid with milk tube holder

A9 Height-adjustable coffee and milk spout

A10 Integrated automatic milk frother

A11 Power cord with plug

A12 Grinding adjustment button (you can go to www.saeco.com/care)

A13 Bean hopper

B8 Start/stop icon

Introduction

AquaClean water filter

A When installing for the first time, connect and update the machine, and regularly check for manual updates.

Connecting to a Wi-Fi network

i Connect your coffee machine to a 2.4 GHz 802.11 b/g/n home Wi-Fi network. i Connecting your coffee machine to your home Wi-Fi network provides you with an enhanced user experience. i Make sure the coffee machine and the Wi-Fi router are within range of each other.

To connect your coffee machine to the Wi-Fi network, follow the instructions below.

1 Tap the settings icon and swipe from left to right to find the Wi-Fi icon. 2 Tap the Wi-Fi icon. 3 Follow the on-screen instructions to connect your machine to the Wi-Fi network.

1 Fill the water tank with tap water and the bean hopper with coffee beans.

2 Place one or two cups under the height-adjustable dispensing spout. Slide the dispenser up or down to adjust the height to the size of the cup or glass you are using.

3 To access the "Drinks" menu, press the Drinks icon. Swipe from left to right to select your drink by tapping on it.

- If you want to make two cups of coffee, press the "2x" icon. The machine will automatically perform the grinding cycle in the sequence of selected drinks.

Brewing milk-based drinks

To brew milk-based drinks, follow these simple steps.

1 Fill the water tank with tap water, and fill the coffee bean container with coffee beans.

2 Unscrew the lid of the milk container and fill the container with milk.

For optimal results, always use milk directly from the refrigerator.

3 Connect the flexible milk tube to the cappuccinatore.

4 Place the metal milk tube into the container.

5 Press the Drinks icon, rotate, and press the milk-based drink icon according to your preference.

6 You can adjust the settings to your liking by sliding the control bars up and down.

7 Press the start/stop icon at any time to start brewing the selected drink.

1 Open the lid of the ground coffee compartment and add one measuring spoon of ground coffee. Then close the lid. 2 Press the Drinks icon, swipe from left to right, and select the drink. 3 Press the ground coffee compartment icon. 4. You can adjust the settings to your liking by sliding the control bars up and down. 5 Press the start/stop icon to start brewing the selected drink. i If you select ground coffee as the primary option, you cannot adjust the coffee strength and cannot brew more than one cup at a time.

Dispensing hot water

1 Check that the internal cappuccinatore is correctly attached to the machine (Fig. 1). 2 Place a cup under the spout. 3 Press the "Hot water" button (Fig. 2). 4 Slide the adjustable panel up and down to change the amount or temperature of hot water as desired (Fig. 3). 5 Press the Start/Stop▶ icon. 6 If you want to stop dispensing hot water before the machine finishes, press the start/stop▶■ icon again.

Matching

B7 Sklep B8 Start/stop icon (Icon

A7 HygieSteam container

Ordering accessories

A7 HygieSteam container

www.saeco.com/MyCoffeeMachine.

AquaClean water filter

www.saeco.com/MyCoffeeMachine.

A7 HygieSteam container

A8 HygieSteam lid with milk tube holder

Connect and update the machine during first installation and regularly check for manual updates.

1 Tap the Settings icon, swipe from left to right to find the Wi-Fi icon. 2 Tap the Wi-Fi icon. 3 Follow the on-screen steps to connect the machine to the Wi-Fi network.

You are now ready to start your connected experience.

1 Fill the water tank with tap water and fill the coffee bean container with coffee beans. 2 Place one or two cups under the adjustable height dispensing spout. To adjust the height of the spout to the size of the cup or glass you are using, slide it up or down. 3 Tap the Drinks icon to open the Drinks menu. Swipe from left to right to select a drink by tapping on it.

- Tap the 2x icon if you want to brew two cups. The machine automatically performs two grinding cycles in sequence for selected drinks.

1 Fill the water tank with tap water and fill the bean container with coffee beans. 2 Twist off the lid of the milk container and fill the milk container with milk.

B8 Start/stop icon

Introduction

When you set up the coffee maker for the first time, connect it and check for updates regularly.

Connecting to Wi-Fi

i Connect your coffee maker to a 2.4 GHz 802.11 b/g/n home Wi-Fi network. i Connecting your coffee maker to your home Wi-Fi network allows you to enhance your user experience. i Make sure that the coffee maker and the Wi-Fi router are within range of each other. Follow the steps below to connect your coffee maker to your Wi-Fi network.

1 Fill the water tank with tap water and fill the bean container with coffee beans. 2 Twist off the lid of the milk container and fill the milk container with milk.

For optimal results, always use milk straight from the refrigerator.

Maintenance Dashboard

A3 Children childhood

A4 Lwnh hwúwn pùhy

A5 ۴۶۸۹۵۱۷۱۶۰۱۶۲۷۳۷

A6 Чушрэhlwljhù consuminglyh wǔgwinnúwù lynǎwù

A7 HygieSteam qnlnn2ni wnàwlniú lynùntjutn

A8 HygieSteam qnlnn2nl wnàwyniw lwwihwnhş' lwwah hunnluwuh pnùhznul

A9 Uninǎh lù ywīh úwùnwúwùnúwù δnnuì pwnànníjwù ywnqwúnnúwù hùwnwúnníjwùp

A10 Utnphü ywwynişhùwunn

A11 3nuwuph [wn` hunngwlnu]

A12 Unwgúwù lwnqwùnnúwù prùwù (lnwgnighs untntlywùnúnjānìu unwùwùnì huúwùn wjgtībp www.saeco.com/care)

A13 Unipah hwnhylutph unnuh

A14 Unātūh hūnūp (lnwgnighz untnīqwwuyniŋjniù uunwùwlni huuíwn wjgtitp www.saeco.com/care)

A15 Uwwuwnluywù nzuwù

A16 Ωnh ρωρ

⚠ Warning: Read the user manual carefully before using the device. The manufacturer is not responsible for any damage caused by improper use.

Wi-Fi connection

The device supports 2.4 GHz 802.11 b/g/n Wi-Fi connections. The device's Wi-Fi connection allows you to use various smart features. Note that the device's Wi-Fi connection is compatible with standard home networks.

To connect the device to your home Wi-Fi network, follow these steps:

1. Press the Wi-Fi button on the device's control panel. 2. Select the Wi-Fi network. 3. Enter the network password using the device's touchscreen.

The device will then attempt to connect to the network.

If the connection is unsuccessful, check that the password is correct and that the router is within range. Also, ensure that the router is not blocking the device.

Maintenance Dashboard

CoffeeMaestro allows you to prepare your favorite coffee drinks. You can choose from three different coffee strengths (Delicato, Intenso, Forte).

The HygieSteam function cleans the milk frother automatically after each use. This ensures that no milk residue remains in the system.

The water filter is made of 100% natural materials and does not contain any harmful substances. It can be used for up to 12 months.

The AquaClean filter reduces scale and improves the taste of your coffee (the filter is included with the machine).

Troubleshooting

1. Use the device only for its intended purpose, following the instructions in this manual. 2. The device is intended for indoor use only. 3. The device must be connected to a power source that matches the specifications in the manual. Do not use the device if the power cord or plug is damaged.

- The "2x" function is used to double the speed of the device. This function is activated by pressing the button on the control panel.

The "2x" function is not available when the device is in standby mode.

4. The device must be cleaned regularly to ensure proper operation. Use a soft, dry cloth to clean the exterior. Do not use water or cleaning agents. 5. The device should be stored in a dry place, away from direct sunlight and heat sources. Keep the device out of reach of children.

The device is now ready for use.

The device has been tested and complies with all applicable safety standards. The device is designed to operate at a temperature range of 0°C to 40°C and a humidity range of 10% to 90%.

1. Remove the protective cap from the device and connect the device to the power source (see figure). The following steps are:

2. Press the power button, wait for the indicator light to turn on and the device to start operating.

3. Remove the protective cap from the nozzle.

4. Adjust the temperature/speed settings using the control buttons on the device's display.

i. The device is now ready for use. For optimal performance, ensure that the device is fully charged before each use.

For more information, refer to the user manual.

1 3wúnqutp, nn utnphù ywwnishùwnnnn ǎh2n ʒ uhwgulwó útptùwjhù (Uy. 1):
2 Όρημήν υπων υπωνητρ ρωδυγ:
3 Tap «Swp gni» wwwlytnwyn (Uy. 2):
4 ৬৭০১৭৫৭০৭০৭০৭০৭০৭০৭০৭০৭০৭০৭০৭০৭০৭০৭০৭০৭০৭০৭০৭০৭০৭০৭০৭০৭০৭৩
5 Utnútp útlyùwnyh/ywùqh▶ywwunytnwyn:
6 Члчнш утнібір уітүйінніх/уішіqh▶цімініутнінін, цнішіqh цнішінтібір ініпрігн wnінішіннінін інішіпріві інініп өзінішініпір өлінініп:

The CoffeeMaestro coffee machine is designed for making delicious coffee. It offers a choice of three different coffee strengths: Delicato, Intenso, and Forte. The CoffeeMaestro coffee machine is easy to use.

1. Fill the water tank with fresh water (Fig. 4). 2. Insert the CoffeeMaestro capsule (Fig. 5). - Select the desired coffee strength using the selector.

3. Press the start/stop button to begin brewing. The machine will automatically stop when the coffee is ready.

Translation of the user manual for CoffeeEqualizer Touch coffee machine

This user manual describes the CoffeeEqualizer Touch coffee machine, which you have purchased and which is intended for making coffee. Before using the machine, please read this manual carefully to ensure proper and safe operation.

The CoffeeEqualizer Touch coffee machine is designed for home use only.

1 Coffee bean container 2 Water tank 3 Control panel 4 Steam wand 5 Coffee grounds container 6 Drip tray 7 Power button and indicator light 8 Water tank lid / milk frother attachment

Note: Do not operate the machine without water, as this may cause damage.

1. Remove the water tank and fill it with fresh water.

It is recommended to use filtered water to improve the taste of your coffee and to prevent scale buildup. Do not use distilled or mineral water.

Before first use, rinse the water tank and the coffee machine components that come into contact with water.

1. Press the "MENU" button to enter the menu (Fig. 6): 2. Press the "SELECT" button to select the desired function (Fig. 7): 3. Confirm the selection by pressing the "OK" button: 4. The selected function is now active. Press the "BACK" button to exit the menu: 5. The "CoffeeEqualizer Touch" and "CoffeeMaestro" functions are available in the menu.

6. Press the "CoffeeEqualizer Touch" function to adjust the coffee strength according to your preference (Fig. 8):

ExtraShot function

The ExtraShot function allows you to add an extra shot of coffee to your beverage. To activate it, press the ExtraShot button on the control panel. The function will remain active until you deactivate it.

1. Press the "MENU" button to enter the menu: 2. Press the "SELECT" button to navigate to the "ExtraShot" function and confirm with "OK" (Fig. 4): 3. Use the arrow buttons to set the desired number of extra shots (from 1 to 10): 4. Press the "OK" button to save the setting and exit the menu: 5. The ExtraShot function is now activated. To deactivate it, repeat the procedure and set the number to 0. Note: The ExtraShot function is only available for certain beverages.

Beverage settings

To adjust the beverage settings, press the "MENU" button, then select "Beverage settings" and choose the desired beverage.

For more information, scan the QR code on the front of the machine or visit www.saeco.com/care

All grades of imaging

▶

▶

CoffeeEqualizer Touch grades of the 2018-2020 Coffee Equalizer Touch

AquaClean -by-mn-2-3-4-5-6-7

2 Uzbekistan, Thailand, Egypt, Bosnia, Myanmar, Jordan, Ghana (Egypt, Nigeria, Bangladesh), United States, China, Indonesia (U.S., 28).

3 Uzbekistan objung gub bujuzon dnddsmzgng qayd8g mn3g dbuqgu (luqm. 29).

azimuth, DAP B.V. azimuth, mem azimuth, azimuth, SM6685, SM6682, SM6680 azimuth 2014/53/EU azimuth

( \text{g3m3g3dn5n} ) g6b3b5on ( \text{g2b5d5dn5m} ) d3g15bgdo 1m7gmsq b3gm4n5b3qmdns d3g4g8 n6f0m6g0- ) d9b5d5m08g: https://www.saeco.com.

796 AquaClean D'Or D'Or

797

797 ____

800 ____

801

801 ____

802 ____

802 ____ 71777179

806 ____ ☐הכלה

807 ____

807 Wi-Fi

www.saeco.com/MyCoffeeMachine

1. Wi-Fi

2. Wi-Fi

3. 770

1. node 2.770

(9) ExtraShot-2017. 3

1. n7e

5.7nc

AquaClean 10% - 7% - 7% - 7% - 7% - 7% - 7% - 7% - 7% - 7% - 7% - 7% - 7% - 7% - 7% - 7% - 7% - 7% - 7% - 7% - 7% - 7% - 7% - 7% - 7% - 7% - 6% - 6% - 6% - 6% - 6% - 6% - 6% - 6% - 6% - 6% - 6% - 6% - 6% - 6% - 6% - 6% - 6% - 6% - 6% - 6% - 6% - 6% - 6% - 6% - 6%

1.Aql 2. ¹ (πι ₁

.הכלההוּרָהוּרָהוּרָהוּרָהוּרָהוּרָהוּרָהוּרָהוּרָהוּרָהוּרָהוּרָהוּרָהוּרָהוּרָה: www.saeco.com/care

9

© 2023 Versuni Holding B.V.

All rights reserved

SAECO is a registered trademark of Koninklijke Philips N.V. and is used under license.

This product has been manufactured by and is sold under the responsibility of Versuni Holding B.V., and Versuni Holding B.V. is the warrantor in relation to this product.

4219.451.0162.1 (5/2023) rev.00

421945101621