303243 - LED Lighting Bearware - Free user manual and instructions

USER MANUAL 303243 Bearware

Important safety guidelines for this device

• This device is meant exclusively for personal use and for the intended purpose. It is not intended for commercial use
• Do not use it outdoors and keep it away from heat sources and direct sunlight
• Do not use this device with wet hands
• Disconnect the power plug from the mains socket when the device is not being used or for cleaning
• Operate the device only with the voltage indicated on the device label
• Children should be supervised to ensure that they do not play with the device
• Children should use or clean the device only under supervision or guidance

- Improper installation will pose a risk to:

- Your own life; - the life of all those who use the electrical unit

- An improper installation can cause serious damage, e.g. by fire!

- Disconnected only when the plug is removed!

- Only for use in dry rooms!

- Do not operate in covered condition!

Thank you for choosing a Bearware product. Please read the following user manual carefully so as to get the most from the product you have purchased.

1 Scope of supply

• LED night light
• User manual

2 Technical data

Power supply 230V AC, 50Hz
Power consumption Approx. 1.6W
Dimensions ø 73.5 x 67.5mm
Features • Adjustable brightness	• Brightness sensor

3 Function

The night light is provided with a sensor that automatically turns on when its gets dark. The sensor light turns off automatically at dawn. The night light is ideal for use, for example, as an orientation light.

4 Product details

RGB light Increase the brightness White light

graph TD
    A["Sun"] --> B["Oval"]
    C["Light Source"] --> D["Light Source"]
    E["W"] --> F["Light Source"]
    G["Light Source"] --> H["Light Source"]
    I["Light Source"] --> J["Light Source"]
    K["Light Source"] --> L["Light Source"]

Brightness sensor Decrease the brightness

5 Commissioning

Take the device out of the package and remove all the packaging material.

• Connect the night light to a properly installed socket.
• Press the "White light" button to change the light to white.
• To switch between the individual colours, press the "RGB light" button in quick succession. The colour changes each time you press the button.
• Press "RGB light" button for about 3 seconds to automatically enable colour-changing function.
• Choose between different levels of brightness by pressing the "Increase brightness" and "Reduce brightness" buttons.

Note: You can adjust the sensitivity to light using the position of the sensor. The sensitivity is higher if the sensor points upwards. The sensitivity is lower if the sensor points downwards.

Caution!

6 Safety instructions and Disclaimer

Never try to open the device to repair or make modifications. Avoid contact with the mains voltage. Do not short-circuit the product. The device is not waterproof, hence please use it only in dry surroundings. Protect it from high humidity, water and snow. Keep the device away from high temperatures.

Do not expose the device to sudden changes in temperature or strong vibrations, as this could damage the electronic components. Check the device for any damage before using it. The device should not be used if it was subject to impact or has been damaged in some other manner. Please comply with the local regulations and restrictions. Do not use the device for purposes other than those described in the user manual.

This product is not a toy. Keep it out of the reach of children or mentally disabled persons. Any repair or modifications to the device, which is not carried out by the original supplier will void any warranty and guarantee claims. The device should only be used by those who have read and understood this user manual. The specifications of the device may be changed without prior intimation.

7 Disposal instructions

In line with the European WEEE directive, electrical and electronic devices should not be disposed of along with domestic waste. Their components have to be separately sent for recycling or disposal, because improper disposal of toxic and dangerous components may permanently damage the environment. According to the Electrical and Electronic Equipment Act (ElektroG), you are obliged (as a consumer) to return (free of charge) all electrical and electronic devices to the manufacturer, the point of sale, or public collection points at the end of their service life. The relevant local laws regulate the details in this regard.

The symbol displayed on the product, in the user manual or/and on the packaging refers to these regulations. With this manner of sorting, recycling and disposal of used devices, you make an important contribution towards protecting our environment.

WEEE directive: 2012/19/EU WEEE Register no.: DE 67896761

The company WD Plus GmbH hereby certifies that the device 303243 / 20180319ZS025 complies with the fundamental requirements and the other relevant stipulations of the directive. A complete conformity statement can be obtained from: WD Plus GmbH, Wohlenbergstraße 16, 30179 Hanover

12 English

graph TD
    A["Sun"] --> B["Oval"]
    C["Light Source"] --> D["Light Source"]
    E["W"] --> F["Light Source"]
    G["Light Source"] --> H["Light Source"]
    I["Light Source"] --> J["Light Source"]
    K["Light Source"] --> L["Light Source"]
    M["Light Source"] --> N["Light Source"]
    O["Light Source"] --> P["Light Source"]
    Q["Light Source"] --> R["Light Source"]
    S["Light Source"] --> T["Light Source"]
    U["Light Source"] --> V["Light Source"]
    W["Light Source"] --> X["Light Source"]
    Y["Light Source"] --> Z["Light Source"]

QR code image containing encoded data, no visible human-readable text

DOWNLOADS & MANUALS