QE55Q70DAT - TV SAMSUNG - Free user manual and instructions

USER MANUAL QE55Q70DAT SAMSUNG

Before Reading This Simple User Guide

This TV comes with this Simple User Guide and an embedded User guide (☑) > ≡ (left directional button) > ⚙️ Settings > Support > Open User guide).

Warning! Important Safety Instructions

Please read the Safety Instructions before using your TV. Refer to the table below for an explanation of symbols which may be on your Samsung product.

CAUTION
RISK OF ELECTRIC SHOCK. DO NOT OPEN.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED PERSONNEL.
	This symbol indicates that high voltage is present inside. It is dangerous to make any kind of contact with any internal part of this product.
	This symbol indicates that this product has included important literature concerning operation and maintenance.
	Class II product: This symbol indicates that a safety connection to electrical earth (ground) is not required. If this symbol is not present on a product with a mains lead, the product MUST have a reliable connection to protective earth (ground).
	AC voltage: Rated voltage marked with this symbol is AC voltage.
	DC voltage: Rated voltage marked with this symbol is DC voltage.
	Caution. Consult instructions for use: This symbol instructs the user to consult the Simple User Guide for further safety related information.

Power

- Do not overload wall outlets, extension cords, or adapters beyond their voltage and capacity. It may cause fire or electric shock.

Refer to the power specifications section of the manual or the power supply label on the product for voltage and amperage information.

- Power-supply cords should be placed so that they are not likely to be walked on or pinched by items placed upon or against them. Pay particular attention to cords at the plug end, at wall outlets, and at the point where they exit from the appliance.

- Never insert anything metallic into the open parts of this apparatus. This may cause electric shock.

- To avoid electric shock, never touch the inside of this apparatus. Only a qualified technician should open this apparatus.

- Be sure to plug in the power cord until it is firmly seated. When unplugging the power cord from a wall outlet, always pull on the power cord's plug. Never unplug it by pulling on the power cord. Do not touch the power cord with wet hands.

- If this apparatus does not operate normally - in particular, if there are any unusual sounds or smells coming from it - unplug it immediately and contact an authorised dealer or Samsung service centre.

- To protect this apparatus from a lightning storm, or to leave it unattended and unused for a long time, be sure to unplug it from the wall outlet and disconnect the antenna or cable system.

– Accumulated dust can cause an electric shock, an electric leakage, or a fire by causing the power cord to generate sparks and heat or by causing the insulation to deteriorate.

- Use only a properly grounded plug and wall outlet.

- An improper ground may cause electric shock or equipment damage. (Class I Equipment only.)

- To turn off this apparatus completely, disconnect it from the wall outlet. To ensure you can unplug this apparatus quickly if necessary, make sure that the wall outlet and power plug are readily accessible.

Installation

- Do not place this apparatus near or over a radiator or heat register, or where it is exposed to direct sunlight.

- Do not place vessels (vases etc.) containing water on this apparatus, as this can result in a fire or electric shock.

- Do not expose this apparatus to rain or moisture.

• Be sure to contact an authorised Samsung service centre for information if you intend to install your TV in a location with heavy dust, high or low temperatures, high humidity, chemical substances, or where it will operate 24 hours a day such as in an airport, a train station, etc. Failure to do so may lead to serious damage to your TV.
• Do not expose this apparatus to dripping or splashing.

Mounting the TV on a wall

If you mount this TV on a wall, follow the instructions exactly as set out by the manufacturer. If it is not correctly mounted, the TV may slide or fall and cause serious injury to a child or adult and serious damage to the TV.

• To order the Samsung wall mount kit, contact Samsung service centre.
• Samsung is not responsible for any damage to the product or injury to yourself or others if you choose to install the wall mount on your own.
• Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or when the consumer fails to follow the product installation instructions.
• You can install your wall mount on a solid wall perpendicular to the floor. Before attaching the wall mount to surfaces other than plaster board, contact your nearest dealer for additional information. If you install the TV on a ceiling or slanted wall, it may fall and result in severe personal injury.
• When installing a wall mount kit, we recommend you fasten all four VESA screws.
• If you want to install a wall mount kit that attaches to the wall using two top screws only, be sure to use a Samsung wall mount kit that supports this type of installation. (You may not be able to purchase this type of wall mount kit, depending on the geographical area.)
• Do not mount the TV at more than a 15 degree tilt.
• Standard dimensions for wall mount kits are shown in the table on the Unpacking and Installation Guide.

Do not install your wall mount kit while your TV is turned on. This may result in personal injury from electric shock.

- Do not use screws that are longer than the standard dimension or do not comply with the VESA standard screw specifications. Screws that are too long may cause damage to the inside of the TV set.

• For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may differ depending on the wall mount specifications.
• Do not fasten the screws too firmly. This may damage the product or cause the product to fall, leading to personal injury. Samsung is not liable for these kinds of accidents.
• Always have two people mount the TV onto a wall.
• For 82 inch or larger models, have four people mount the TV onto a wall.

Providing proper ventilation for your TV

When you install your TV *and One Connect Box, maintain a distance of at least 10 cm between the TV *and One Connect Box with other objects (walls, cabinet sides, etc.) to ensure proper ventilation. Failing to maintain proper ventilation may result in a fire or a problem with the product caused by an increase in its internal temperature.

*: One Connect Box Supported Model Only

- When you install your TV with a stand or a wall mount, we strongly recommend you use parts provided by Samsung only. Using parts provided by another manufacturer may cause difficulties with the product or result in injury caused by the product falling.

Safety Precaution

Caution: Pulling, pushing, or climbing on the TV may cause the TV to fall. In particular, do not hang on or destabilise the TV. This action may cause the TV to tip over, causing serious injuries or death. Follow all safety precautions provided in the Safety Flyer included with your TV. For added stability and safety, you can purchase and install the anti-fall device, referring to "Preventing the TV from falling".

WARNING: Never place a television set in an unstable location. The television set may fall, causing serious personal injury or death. Many injuries can be avoided by taking simple precautions such as:

• Always use cabinets or stands or mounting methods recommended by Samsung.
• Always use furniture that can safely support the television set.
- Always ensure the television set is not overhanging the edge of the supporting furniture.

• Always educate about the dangers of climbing on furniture to reach the television set or its controls.
• Always route cards and cables connected to your television so they cannot be tripped over, pulled or grabbed.
- Never place a television set in an unstable location.
- Never place the television set on all furniture (for example, cupboards or bookcases) without anchoring both the furniture and the television set to a suitable support.
- Never place the television set or cloth or other materials that may be located between the television set and supporting furniture.
- Never place items that might tempt to climb, such as toys and remote controls, on the top of the television or furniture on which the television is placed.

If the existing television set is going to be retained and relocated, the same considerations as above should be applied.

- When you have to relocate or lift the TV for replacement or cleaning, be sure not to pull out the stand.

Preventing the TV from falling

Technical diagram showing a mechanical assembly with a magnified view of a corner detail (no text or symbols)

★: Wall-anchor (not supplied)

1. Using the appropriate screws, firmly fasten a set of brackets to the wall. Confirm that the screws are firmly attached to the wall.

You may need additional material such as wall anchors depending on the type of wall.

1. Using the appropriately sized screws, firmly fasten a set of brackets to the TV.

For the screw specifications, refer to the standard screw part in the table on the Unpacking and Installation Guide.

1. Connect the brackets fixed to the TV and the brackets fixed to the wall with a durable, heavy-duty string, and then tie the string slightly.

- install the TV near the wall so that it does not fall backwards.

Precautions when installing the TV with a stand

[The Frame Series only]

When you install the TV with a stand, avoid placing the stand on the back part of the table surface. Failure to do so may cause the motion sensor as the bottom of the TV not to work properly.

Operation

• This apparatus uses batteries. In your community, there might be environmental regulations that require you to dispose of these batteries properly. Please contact your local authorities for disposal or recycling information.
• Store the accessories (remote control, batteries, or etc.) in a location safely out of the reach.
• Do not drop or strike the product. If the product is damaged, disconnect the power cord and contact a Samsung service centre.
  • Do not dispose of remote control or batteries in a fire.
• Do not short-circuit, disassemble, or overheat the batteries.
• CAUTION: There is danger of an explosion if you replace the batteries used in the remote with the wrong type of battery. Replace only with the same or equivalent type.
• WARNING - TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES AND OTHER ITEMS WITH OPEN FLAMES AWAY FROM THIS PRODUCT AT ALL TIMES.

Caring for the TV

• To clear this apparatus, unplug the power cord from the wall outlet and wipe the product with a soft, dry cloth. Do not use any chemicals such as wax, benzene, alcohol, thinners, insecticides, aerial fresheners, lubricants, or detergents. These chemicals can damage the appearance of the TV or erase the printing on the product.
• The exterior and screen of the TV can get scratched during cleaning. Be sure to wipe the exterior and screen carefully

01 What's in the Box?

Make sure the following items are included with your TV. If any items are missing, contact your dealer.

• Simple User Guide
• Warranty Card / Regulatory Guide (Not available in some situations)
  • *Samsung Smart Remote
  * Remote Control & Batteries
  • *Standard Remote Control & Batteries
• *□ Card Adapter
  • *TV Power Cord
  • Wall Mount Adapter x 2
  • **One Connect Flex
  • **One Connect Box Power Cord
• **One Connect Cable x 2
• **One Connect cable holder (for wall mount)
• ***One Connect Box
• One Connect Box Power Cord
• ***One Connect Cable
  • Web Camera / Text Cover / Page Gender (QNPSD Series only)
  * Some of the items specified above may not be included in the
  package, depending on the model or geographical area.
  **:ON9**D, DN8**D, S950 Series
  *** The Frame Series
  • The type of battery may vary depending on the model.
• The items' colours and shapes may vary depending on the modes.
  • Cables not included can be purchased separately.
• Check for any accessories hidden behind or in the packing materials when opening the box.

Warning: Screens can be damaged from

direct pressure when handled incorrectly. We

recommend lifting the IV at the edges, as shown.

For more information about handling, refer to the Unpecking and installation Guide came with this product.

02 Connecting the TV to the One Connect Box

(One Connect Box Supported Model only)

For more information about how to connect via the One Connect Box, refer to Unpacking and Installation Guide.

- Do not use the One Connect Box in the upside-

down or upright position.

• Take care not to subject the cable to any of the

actions below. The One Connect Cable contains a power circuit.

Banding Twisting Pulling

Pressing on Electric snack

CLASS LASER PRODUCT (the Frame Series only)

- Cautism - Invisible laser radiation when open. Do not share into beam.

- Do not bend the One Connect Cable excessively. Do not cut the cable.

- Do not place heavy objects on the cable.

Do not disassemble either of the cable connectors.

- Caution - Use of controls, adjustments, or the performance of procedures other than these specified herein may result in hazardous radiation exposure.

Using the One Connect cable holder

[QN8**D, QN9**D, SP5D Series only]

You can use the One Connect cable holder to toy up the cables while installing the wall mount.

03 Initial Setup

• You will need a Samsung Account to access our network-based smart services. If you choose not to log in, you will only get a connection to terrestrial TV applicable to devices with tuners only! and external devices, e.g. via HDMI.
• When installing the 43LS03D model as a wall mount, it can be installed vertically and used.

- Some features may not support portrait mode or full screen.

- The initial setup is optimized for landscape mode.

Using the TV Controller

You can turn on the TV with the TV Controller button at the bottom of the TV, and then use the Control menu. The Control menu appears when the TV Controller button is pressed while the TV is On.

• The position and shape of the buttons at the bottom of the TV may differ depending on the model.
• The screen may dim if the protective film on the SAMSUNG logo or the bottom of the TV is not detached. If protective film is attached, remove the film.

A Control menu
8 TV Controller button / Remote control sensor / Microphone switch / *Motion Sensor
© TV Controller button / Remote control sensor
D Microphone switch
- "In Art mode, the Remote control sensor at the bottom of the IV remains off.
*: The Frame Series only

How to turn on and off the Microphone
Type A Type B

Type C Type D

You can turn on or off the microphone by using the switch at the bottom or rear bottom of the TV. If microphone is turned off, all voice and sound features using microphone are not available.

• The function is supported only in QN8**D/QN9**D/Q7*D except for 43Q7*D/50G7*D model:Q8*D/QN8*D/QN9*D/58*D/59*D/The Frame Series.
• The position and shape of the microphone switch may differ depending on the model.
• During analysis using data from the microphone, the data is not saved.

Connecting the camera to the product (QN95D Series only)

When you connect a camera, you can use video calls, home workouts, and other new features with the camera.

Resolution	1920 x 1080, 30 (ps. IFHD)
Automatic lighting correction	YES
Viewing angle	85°

04 Troubleshooting and Maintenance

Troubleshooting

For more information, refer to "Troubleshooting" in the User's video.

≡ (Ie/1 directional button) > Settings > Support > Open User guide > Troubleshooting
If none of the troubleshooting tips apply, please visit "www.samsung.com" and click Support or contact the Samsung service centre.
- This panel is made up of sub pixels which require sophisticated technology to produce. There may be, however,

The TV won't turn on.

• Make sure that the power cord is securely plugged into the product and the wall outlet.
• Make sure that the wall outlet is working and the remote control sensor at the bottom of the TV is lit and glowing a solid rod.
• Try pressing the TV Controller button at the bottom of the TV to make sure that the problem is not with the remote control if the TV turns on, refer to "The remote control does not work"

The remote control does not work.

• Check if the remote control sensor at the bottom of the TV blinks when you press the 📁 button on the remote control.
• DU7 Series, Standard Remote Control: If it does not blink replace the remote control's batteries. Make sure that the batteries are installed with their poles (1/2) in the correct direction. Alkaline batteries are recommended for longer battery life.
• Other models: When the remote's battery is discharged, charge the battery using the USB charging port (C type), or turn over the remote to expose the solar cell to light.

- Try pinching the remote directly at the TV from 1.5–1.9 m away.

- If your TV came with a Samsung Smart Remote (Bluetooth Remote), make sure to pair the remote to the TV. To pair a Samsung Smart Remote, press the 📋 and 📌️ buttons.

Eco Sensor and screen brightness

For Sensor adjusts the brightness of the TV automatically. This feature measures the light in your room and optimises the brightness of the TV automatically to reduce power consumption. If you want to run this off, go in > > (if, directional button) > > Settings > All Settings > General & Privacy > Power and Energy Saving > Brightness Optimisation.

- The exc sensor is located at the bottom of the TV. Do not block the sensor with any object. This can decrease picture brightness.

Changing the TV's password

(●) > □ (left directional button) > ⏻ Settings > All Settings > General & Privacy > System Manager > Change PIN

Run Change PIN and then enter the current password in the password field. The default password is "0200" (French: "11"). Enter a new password and then enter it again to confirm it. The password chance is complete.

• Samsung Smart Remote: Press +/—(Volume) button.
Volume Up > Volume Down > Volume Up >
- Standard Remote Control: Press +Volume Up> >Press RETURN button, >-(Volume Down)>Press RETURN button, >+(Volume Up)>Press RETURN button.

05 Specifications and Other Information

Specifications

Display Resolution

CN8**D/QN9**D Series: 7680 x 4320

Other models: 3840 x 2160

Sound (Output)

DU7/DU8/Q6*D/Q7*D Series: 20 W

590D/Q8*D/QN8*D Series:40W

59*D Series: 60 W

GN900/QN9*D Series (MT): 20 W

GN900/ON90 Series 150":40 W

CNVDO Series (55"-98"); 60 W. QNF*D Series (55"-85"); 70 W

595D/QN95D/QNB**D Series:70 W

GNR**D Series: 90 W

LS03D Series (45'-50'): 20 W

L303D Series (55'-65'): 40 W

Operating Temperature

10℃ to 40℃ (50°F to 104°F)

Operating Humidity

10% to 80%, non-condensing

Storage Temperature

-20℃ to 45℃; -4°F to 113°F)

Storage Humidity

5% to 95%, non-condensing

Notes

• This device is a Class B digital apparatus.

- For information about the power supply, and more information about power consumption, refer to the information or the label attached to the product.

- On most models, the label is attached to the back of the IV.

(On some models, the label is inside the cover terminal.)

On One Connect Box models, the label is attached to the

bottom of the One Connec

• Typical power consumption is measured according to IEC 2007

- The images and specifications of the Unpacking and Installation Guide may differ from the actual product.

Figures and Illustrations in this Simple User Guide are provided for reference only and may differ from the actual product appearance. Product design and specifications may change without notice.

An administration fee may be charged in the following situations: (a) An engineer is called out at your request, but it is found that the product has no defect (i.e., where the user manual has not been read).

(b) You bring the unit to the Samsung service centre, but it is found that the product has no defect (i.e., where the user manual has not been read).

You will be informed of the administration fee amount before a technician visits.

Following the repair by a non authorised service provider, self-repair or non-professional repair of the product, Samsung is not liable for any damage to the product, any injury or any other product safety issue caused by any attempt to repair the product which does not carefully follow these repair and maintenance instructions. Any damage to the product caused by an attempt to repair the product by any person other than a Samsung certified service provider will not be covered by the warranty.

Please visit samsung.com/support to find father information about external power adapter and remote control associated with EU Ecodesign directive - ErP regulation

Decreasing power consumption

When you shut the TV off, it enters Standby mode. In Standby mode, it continues to draw a small amount of power. To decrease power consumption, unplug the power cord when you don't intend to use the TV for a long time.

Hersey, Samsung declares that this radio equipment is in compliance with Directive 2014/53/EU and the relevant UK statutory requirements.

The full text of the declaration of conformity is available at the following internet address:

http://www.samsung.com.go to Support and enter the model name.

This equipment may be operated in all EU countries and in the UK

[QN9**D/QN8**D Series]

100 mW at 2A CI z - 2A835 GHz

200 mW a: 515 GHz - 525 GHz & 547 GHz - 5725 GHz

100 mW at 5.25 GHz 5.35 GHz

200 mW at 5.945 GHz - 6.425 GHz

[59*D/S8*D/QN9*D/QN8*D/Q8*D/Q7*D/Q6*D/DU8/DU7]

Series]

100 mW at 2/4 GHz - 2/4935 GHz

200 mW at 5.15 GHz - 5.25 GHz & 5.47 GHz - 5.725 GHz

100 mW at 5.25 GHz - 5.35 GHz.

[The Frame Series]

100 mW at 24 GHz - 24835 GHz

200 mW at 515 GHz 525 GHz & 547 GHz 5725 GHz

100 mW at 5.25 GHz - 5.35 GHz

100 mV at 51 GHz - 61.5 GHz

Correct Disposal of This Product Waste

Electrical & Electronic Equipment

(Applicable in countries with separate

collection systems)

This marking or the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cabinet should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote sustainable reuse of material resources.

Household users should contact other the retailer where they purchased this product, or their local government office, for details of where and how they can take these items for environmentally safe recycling.

Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its electronic accessories should not be mixed with other commercial wastes for disposal.

Removing the battery

• To remove the battery, contact an authorised service centre. To obtain battery removal instructions, please visit www.samsung.com/global/ecodesign_energy.

- For your safety, you must not attempt to remove the battery. The battery is not more than removed if raw least to remove to

Correct disposal of batteries in this product (Applicable in countries with separate collection systems)

This marking or the battery, manual or packaging indicates that the bestark in this product should not be disposed of with other household waste at the end of their working life. Where marked, the chemical symbols Hg, Co or Po indicate that the battery contains mercury, cadmium or lead above the reference levels in FC Directive 2006/66. If batteries are not properly disposed of, these substances can cause harm to human health or the environment.

To protect natural resources and to promote material reuse, please separate batteries from other types of waste and recycle them through your local, free battery return system.

- The type of battery may vary depending on the model.

Correct disposal of batteries in this product (Applicable in countries with separate collection systems)

The marking on the battery, manual or packaging indicates that the battery in this product should not be disposed of with other household waste. Where marked, the chemical symbols I.g. Cd o Pb indicate that the battery contains mercury, sodium or lead above the reference levels in EC Directive 2006/66.

The battery incorporated in this product is not user replaceable. For information on its replacement, please contact your service provider. Do not attempt to remove the battery or dispose it in a fire. Do not disassemble, crush, or puncture the battery. If you intend to discard the product, the waste collection she will take the epoproxise measures for the recycling and treatment of the product, including the battery.

• The type of battery may vary depending on the model.

Declaration of Conformity

Manufacturer

Nama Samsung

Registered Trade Name: Samsung Electronics Co., Ltd

Address: 129 Samsung-ro, Yeongtang-gu, Suwon-sl, Gyeonggi-

de, Kores

Product Details

Product: Smart Control

Model(s): VC-1M23605

Declaration and applicable standards

We hereby declare under our sole responsibility that the product

above is in compliance with the essential requirements of the

Radio Equipment Directive[2014/53/EUI] by application of:

EMC

EN:301499-1V223

EN 301489-17V3.24

EN EC 62368-1:2020+A11:2020

ENIEC 62368-3-2020

LN624792010

Radio

EN 300 328 V2.2.2

and the Directive (2017/65/LU) on the restriction of the use

of certain hazardous substances in electrical and electronic

equipment by application of EN IEC 63000-2018.

Signed for and on behalf of: Samsung

Samsung Euro QA Lab, Saxony Way, Yateley, GU46 60G, UK

2023-11-14 (Place and date of signature)

Stephen Coldough Director

Regulatory Affairs

Name and signature of

authorized person

This is not the address of Samsung Service Centre. Please see the address or the phone number of Samsung Service Centre in the warranty card or contact the retailer where you purchased your product.

English

The image is too blurry to recognize any text content.

Technical illustration showing a mechanical assembly with a magnified inset of a component and a close-up view of a pin (no text or symbols)

Simple line drawing of a rectangular box with a flat panel on top, no text or symbols present.

Simple line drawing of a rectangular box with a vertical panel and a dashed line indicating a measurement or alignment (no text or symbols)

Funktion

Diagram showing a device being processed from a base to a display panel, with an inset close-up of the component (no text or symbols present)

* Shielded Twisted Pair

Deutsch - 7

EN IEC 62368-1:2020+A11:2020

EN 301 489-17 V3.2.4

EN IEC 62368-3:2020

EN 62479:2010

Funk

EN 300 328 V2.2.2

Technical illustration showing a mechanical assembly with a magnified inset of a gear and a close-up view of a pin (no text or symbols)

★ : Ancrage mural (non fourni)

Simple line drawing of a rectangular box with a flat panel and a circular element on top (no text or symbols)

Simple line drawing of a rectangular box with a vertical panel and a diagonal line, no text or symbols present.

Opération

Diagram showing a device being processed from a base to a display panel, with an inset close-up of the component (no text or symbols present)

03 Configuration initiale

Diagram showing three rectangular panels with labeled points A, B, C, D and connecting lines, likely illustrating a physics or engineering concept.

A Menu de contrôle

* Shielded Twisted Pair

Nom commercial depose: Samsung Electronics Co., Ltd

Address: 129 Samsung-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, Korea

Détails du produit

EN IEC 62368-1:2020+A11:2020

EN IEC 62368-3:2020

EN 62479:2010

Radio

EN 300 328 V2.2.2

Technical illustration showing a mechanical assembly with a magnified inset of a component (no text or symbols)

Simple line drawing of a rectangular box with a flat panel and a circular element above it (no text or symbols)

Simple line drawing of a rectangular box with a vertical panel and a diagonal line, no text or symbols present.

Funzione

Diagram showing a device being processed from a base to a display panel, with an inset close-up of the component (no text or symbols present)

EN IEC 62368-1:2020+A11:2020

EN IEC 62368-3:2020

EN 62479:2010

Radio

EN 300 328 V2.2.2

Technical illustration showing a mechanical assembly with a magnified inset of a component (no text or symbols)

Simple line drawing of a rectangular box with a flat panel and a circular element above it (no text or symbols)

Simple line drawing of a rectangular box with a vertical panel and a dashed line indicating a measurement or alignment (no text or symbols)

Bediening

Diagram showing a device being processed from an initial state, with a magnified inset illustrating the process (no text or symbols present)

Diagram showing three identical setups with labeled components A, B, C, D and a central component S, likely illustrating a physics or engineering concept.

* Shielded Twisted Pair

EN IEC 62368-1:2020+A11:2020

EN IEC 62368-3:2020

EN 62479:2010

Radio

EN 300 328 V2.2.2

Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact the Samsung service centre.

Country/Region	Samsung Service Centre	Website
AUSTRIA 0800 72 67	864 (0800-SAMSUNG) www.samsung.com/at/support
BELGIUM 02-201-24	-18	www.samsung.com/be/support (Dutch)www.samsung.com/be_fr/support (French)
BOSNIA 055 233 999	www.samsung.com/ba/support
DENMARK 707 019 70	www.samsung.com/dk/support
FINLAND 030-6227	515 www.samsung.com/fi/support
FRANCE 01 48 63 00	00 www.samsung.com/fr/support
GERMANY 06196 77	555 77 www.samsung.com/de/support
ITALIA 800-SAMSUNG	(800.7267864) www.samsung.com/it/support
LUXEMBURG	261 03 710	www.samsung.com/be_fr/support
MONTENEGRO	020 405 888	www.samsung.com/support
NETHERLANDS	088 90 90 100	www.samsung.com/nl/support
NORWAY	21629099	www.samsung.com/no/support
PORTUGAL	210 608 098	www.samsung.com/pt/support
KOSOVO	038 40 30 90	www.samsung.com/support
SPAIN	91 175 00 15	www.samsung.com/es/support
SWEDEN 0771-400 300	www.samsung.com/se/support
SWITZERLAND	0800 726 786	www.samsung.com/ch/support (German)www.samsung.com/ch_fr/support (French)