Puro 5 - Air purifier Sonnenkönig - Free user manual and instructions

USER MANUAL Puro 5 Sonnenkönig

Line drawing of a cylindrical mechanical device with a flanged end and internal components (no text or symbols)

INDEX

Diagram showing a device emitting particles into a square chamber with an arrow indicating direction (no text or symbols)

Simple line drawing of a cylindrical object with two radiating lines and a central horizontal bar (no text or symbols)

Diagram showing a device emitting particles from a container, with no visible text or symbols

Diagram of a mechanical device with a cylindrical top and internal components, showing an upward arrow (no text or symbols)

Diagram of a mechanical device with rotating shaft and housing, showing upward motion (no text or symbols)

Diagram of a mechanical device with a rotating shaft and spring, showing motion direction (no text or symbols)

Diagram of a mechanical device with a downward arrow indicating motion or force (no text or symbols present)

1. Abdeckung anbringen

Line drawing of a cylindrical mechanical device with a base and side ports (no text or symbols)

INDEX

Simple line drawing of a device with a square panel and a cylindrical device emitting particles (no text or symbols)

Simple line drawing of a cylindrical object with three radiating lines and two concentric rings, no text or symbols present.

Diagram showing a device emitting particles from a container, with no visible text or symbols

1. retirer de la prise

Diagram of a mechanical device with a cylindrical top and internal components, showing an upward arrow (no text or symbols)

Diagram of a mechanical device with rotating shaft and directional arrow (no text or symbols)

Diagram of a mechanical device with a rotating shaft and spring, showing motion direction (no text or symbols)

Diagram of a mechanical device with a downward arrow indicating motion or force (no text or symbols present)

1. attacher la couverture

Modifications techniques

Line drawing of a cylindrical mechanical device with a base and side ports (no text or symbols)

INDEX

Diagram showing a device emitting powder into a square socket (no text or symbols)

Simple line drawing of a cylindrical object with three radiating lines and two concentric rings, no text or symbols present.

Diagram showing a device emitting particles from a source, with no visible text or symbols

Diagram of a mechanical device with a cylindrical top and internal components, showing directional arrows (no text or symbols)

Mechanical device diagram showing a rotating knob and directional arrow (no text or symbols)

Diagram of a mechanical device with a rotating shaft and spring, showing motion direction (no text or symbols)

Diagram of a mechanical device with a downward arrow indicating motion or force (no text or symbols present)

1. copertura allegare

Line drawing of a cylindrical mechanical device with a base and side ports (no text or symbols)

INDEX

1 Safety instructions ....30
2 Device overview....31
3 Technical Details ...... 31
4 Usage....32
5 Replace lamp....32
6 Troubleshooting....33
7 Cleaning ....33
8 Warranty / disposal / technical modifications ....34

1 Safety instructions

Before putting the device into operation, please read the following important information and the operating instructions thoroughly!

• Use the air purifier only according to the instructions in this manual.
• Before inserting the plug into the socket, make sure that the voltage corresponds to the specifications on the product's type plate.
• Do not use the product if the power plug is damaged or the power plug has become loose to avoid electric shock, short circuits and fire.
• Do not use extension cords
• Do not make any changes to the air purifier. If the air purifier needs to be repaired or the damaged power plug needs to be replaced, please contact an authorized service center.
• Before cleaning the air purifier or removing the UV-C bulb, always turn off the power and unplug the appliance.
• Never touch the plug or the air purifier with wet hands.
• Do not operate the air purifier when using bug spray.
• The air purifier is not equipped with a protection against moisture and must be used exclusively inside the apartment, away from showers, bathtubs, washbasins or similar.
• Do not use the appliance outdoors.
• Do not immerse it in water or other liquids.
• Do not operate the appliance near an oven.
• Do not use the unit near flammable gases such as natural or propane gas.
• Do not use the unit near flames, kitchen or heating appliances or generally hot surfaces.
• Keep the air purifier out of the reach of children and disabled persons to prevent accidents.
• Do not insert fingers and/or other objects into the air intake/exhaust grilles.
• Do not place any objects on the appliance.
• Unplug the appliance from the power outlet during long periods of non-use

2 Device overview

EN

1 Air outlet

4 Indicator

2 Cover

5 Air inlet

3 UV-C Bulb

6 Plug

2 13456

3 Technical Details

Designation PURO 5

Art. Nr. 10200901

Weight 0.24 kg

Power 4.5 W

Voltage 230 V / 50 Hz

UV lamp ≥ 400 uW/cm ^2

253.7 nm (UV-C)

4 Usage

Diagram showing a device emitting powder into a square socket (no text or symbols)

1. Plug the device into a suitable socket.

Simple line drawing of a cylindrical object with three radiating lines and two concentric rings, no text or symbols present.

1. The device now immediately begins operation and confirms this with a blue light.

5 Replace lamp

Diagram showing a device emitting particles from a square source, with no visible text or symbols

1. remove from the socket

Diagram of a mechanical device with a cylindrical top and internal components, showing an upward arrow (no text or symbols)

1. Remove the cover

Mechanical device diagram showing a rotating shaft and housing with an upward arrow (no text or symbols)

1. Unscrew the old lamp

Diagram of a mechanical device with a rotating shaft and spring, showing motion direction (no text or symbols)

1. Screw the new lamp in

Diagram of a mechanical device with a downward arrow indicating motion or force (no text or symbols present)

1. Install the cover

The service life of the UV-C lamp is 5000 hours. It is recommended to replace the UV-C lamp approximately every 6 months. If a significant decrease in brightness or a change in color is detected, the lamp bulb should be replaced.

6 Troubleshooting

EN

Problem Solution

Device does not work	Check the power connection
	Contact the manufacturer
Blinking light	Change the UV-C bulb according to this manual.
Device running without light

7 Cleaning

Disconnect the device from the power supply, before they start cleaning.

Clean the device with a soft, damp cloth. Also clean the inside of the cover and check if dust has formed in the air inlet. Remove the UV-C lamp for cleaning so that it is not damaged.

Do not use caustic or abrasive cleaning agents!

8 Warranty / disposal / technical modifications

Warranty

The air washers are carefully checked before delivery. Should there still be a defect in your device, please contact your dealer in confidence. Please have the proof of purchase ready, as this must be presented for any warranty service.

Disposal

The air conditioner must be disposed of properly. The unit can be returned to any specialist dealer free of charge for disposal.

Technical modifications

Subject to technical changes in technology and design.

Please retain the packaging material for the device.

CE-declaration of conformity

The device complies with the following standards

EMC EN 55014-1:2017

EN 55014-2:2015

EN 61000-3-2:2019

EN 61000-3-3:2013

LVD EN 60335-2-65:2003+A11:2012

EN 60335-1:2012+A13:2017

EN 62233:2008

EMC 2014/30/EU

LVD 2014/35/EU

RoHS 2011/65/EU

DISPOSAL INSTRUCTIONS FOR THE ELECTRICAL PART OF THE PRODUCT

In accordance with Article 26 of the Decree-Law of 31 March 2015 implementing Directive 2012/19/EC and the Law of 4 March 2014 implementing Directive 2015/863/EC on the reduction of the use of hazardous substances in electrical and electronic equipment and on waste management.

The crossed-out dustbin symbol on the machine or packaging indicates that the waste generated at the end of its useful life must be collected separately from other waste. The user must therefore take the device to the appropriate collection points at the end of its service life. Sort electronic and electrical waste or send the purchase of new, equivalent devices back to the dealer in a one-to-one process. L'adeguata separate collection for subsequent commissioning of the equipment to be recycled, treatment and environmentally sound disposal, helps to avoid possible adverse effects on the environment and health and promote the reuse and/or recycling of the materials to which they belong. composed the equipment. Misuse of this product by the user will result in the application of the administrative penalties provided for in the applicable legislation. Batteries contained in the device must be disposed of separately in the appropriate containers for the collection of used batteries.

DISPOSAL OF BATTERIES AND ACCUMULATORS

In accordance with Legislative Decree 188 of 20 November 2008 implementing Directive 2006/66/EC on batteries, accumulators and related waste, the symbol of the crossed-out waste bin on the battery indicates that it is prohibited to dispose of used batteries in household waste.

Batteries and batteries contain substances that are highly polluting for the environment. The user is obliged to dispose of used batteries at collection points in the municipality or in appropriate containers. The service is free. In this way, legal requirements will be respected and the environment will be protected. The symbols identifying hazardous materials that may be present in batteries and accumulators are as follows: Hg= Mercury, Cd= Cadmium, Pb= Lead.

Company

Armin Schmid

Olensbachstrasse 9-15

CH-9631 Ulisbach

Tel. Int. [phone]

Tel. Nat. 0848870850

www.sonnenkoenig.ch

Company

Armin Schmid