Silk-épil 5 625 - Epilator BRAUN - Free user manual and instructions

USER MANUAL Silk-épil 5 625 BRAUN

This appliance is provided with a special cord set with an integrated Safety Extra Low Voltage power supply. Do not exchange or manipulate any part of it. Otherwise there is risk of electric shock.

This appliance is suitable for cleaning under run- ning tap water.

Warning: Detach the appli-

ance from the power supply before cleaning any of the heads with water.

This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervi- sion or instruction concerning the safe use of the appliance and understand the hazards involved. Children should not play with the appliance. Cleaning and user mainte- nance should not be made by children.

• When switched on, the appliance must never come in contact with the hair on your head, eyelashes, ribbons, etc. to prevent any danger of injury as well as to prevent blockage or damage to the appliance.

• For hygienic reasons, do not share this appliance with other persons. General information on epilation All methods of hair removal at the root can lead to in-growing hair and irritation (e.g. itching, discomfort and reddening of the skin) depending on the condition of the skin and hair. This is a normal reaction and should quickly disappear, but may be stronger when you are removing hair at the root for the first few times or if you have sensitive skin. If, after 36 hours, the skin still shows irritation, we recommend that you contact your physician. In general, the skin reaction and the sensation of pain tend to diminish considerably with the repeated use of Silk·épil. In some cases inflammation of the skin could occur when bacteria penetrate the skin (e.g. when sliding the appliance over the skin). Thorough cleaning of the epilation head before each use will minimise the risk of infection. If you have any doubts about using this appliance, please consult your physician. In the following cases, this appliance should only be used after prior consultation with a physician: – eczema, wounds, inflamed skin reactions such as folliculitis (purulent hair follicles) and varicose veins, – around moles, 90340813_SE5_Power_MN.indd 1090340813_SE5_Power_MN.indd 10 02.06.22 10:4902.06.22 10:4911 – reduced immunity of the skin, e.g. diabetes mellitus, during pregnancy, Raynaud’s disease, haemophilia, candida or immune deficiency. Some useful tips If you have not used an epilator before, or if you have not epilated for a longer period of time, it may take a short time for your skin to adapt to epilation. The discomfort experienced in the beginning will decrease considerably with repeated use as the skin adapts to the process. Epilation is easier and more comfortable when the hair is at the optimum length of 2-5 mm. If hairs are longer, we recom- mend that you first shave (see section B) and epilate the shorter, re-growing hairs a week later. When epilating for the first time, it is advisable to epilate in the evening, so that any possible reddening can disap- pear overnight. To relax the skin we recommend applying a moisture cream after epilation. Fine hair which re-grows might not grow up to the skin surface. The regular use of massage sponges (e.g. after showering) or exfoliation peelings helps to prevent in-growing hair as the gentle scrubbing action removes the upper skin layer and fine hair can get through to the skin surface. Description 1a High-frequency massage cap 1b Skin Contact cap* 2 Epilation head with tweezer element 3 Light 4 On/off switch 5 Release button 6 Special cord set 7 Shaver head attachment with trimmer cap*

• not with all models Preparing for use

• Your skin must be dry and free from grease or cream.

• Before use, always make sure that the epilation head (2) is clean and provided with a cap (1).

• To change caps, press their lateral ribs and pull off.

• To change heads, press the release button (5). A How to epilate 1 How to operate the appliance Turn the on/off switch (4) to operate the appliance: Turn to position «I» = extra gentle Turn to position «II» = extra efficient As long as the appliance is switched on, the light (3) illuminates the area to be epilated. This gives you a better control for improved epilation efficiency. 2 How to guide the appliance

• Always stretch your skin when epilating.

• Always make sure that the epilation area is in close contact with your skin.

• Guide the appliance in a slow, continuous movement without pressure against the hair growth, in the direction of the switch. As hair can grow in different directions, it may also be helpful to guide the appliance in different directions to achieve optimal results. The pulsat- ing movements of the massaging rollers stimulate and relax the skin for a gentler epilation.

• If you are used to the sensation of epilation, you may replace the massage cap (1a) with the skin contact cap (1b) which provides a closer skin contact and an improved adaptation to all body areas. 3 Leg epilation Epilate your legs from the lower leg in an upward direction. When epilating 90340813_SE5_Power_MN.indd 1190340813_SE5_Power_MN.indd 11 02.06.22 10:4902.06.22 10:4912 behind the knee, keep the leg stretched out straight. 4 Underarm and bikini line epilation Please be aware that especially at the beginning, these areas are particularly sensitive to pain. Therefore, we recom- mend you start with switch setting «I». With repeated usage the pain sensa- tion will diminish. Before epilating, thoroughly clean the respective area to remove residues (like deodorant). Then carefully dab dry with a towel. When epilating the underarm, keep your arm raised up so that the skin is stretched and guide the appliance in different directions. As skin may be more sensitive directly after epilation, avoid using irritating substances such as deodorants with alcohol. 5 Cleaning the epilation head Before cleaning, unplug the appliance. Regular cleaning ensures better per- formance. a Brush cleaning: Remove the cap (1) and brush it out. Thoroughly clean the tweezers from the rear side of the epilator head with the brush dipped into alcohol. While doing so, turn the tweezer element manually. This cleaning method ensures best hygienic conditions for the epilation head. b Cleaning under running water: Remove the cap. Hold the appliance with the epilation head under running water. Then press the release button (5) to remove the epilation head (2). Thoroughly shake both, the epilation head and the appliance to make sure that remaining water can drip out. Leave both parts to dry. Before reat- taching, make sure that they are com- pletely dry. B How to use the shaver head The shaver head (7) is designed for a fast and close shave of legs, underarms and bikini line, contour trimming and cutting hair to 5 mm length. With the shaver head attached, use the appliance only on dry skin and with speed setting «II». a Shaving: select «