FK8420 - Insect repellent Duronic - Free user manual and instructions

USER MANUAL FK8420 Duronic

English Manual6 Instructions The Electronic Insect Killer works by using ultra-violet rays of wave lengths, which is proven to be the most effective lure for light sensitive ying insects such as ies, moths, mosquitoes etc. These insects are electrocuted by electrically-charged metal grids. No chemicals, no smell, no spray, no mess, pollution free and harmless to humans and pets.

1. This product is made for domestic use only.

2. This product has high voltage! Do not touch the inner electrical grids.

3. Never put metal objects inside the grids while the item is in operation.

4. Keep away from ammable gas or liquid.

5. Check the local voltage before operating.

6. Keep the appliance and its cord out of reach of children.

7. The Insect Killer cannot be used in barns, stables and similar locations

where ammable material is present or in locations where ammable vapor or explosive dust is likely to exist.

8. If the supply cord is damaged, it must be replaced by the manufacturer, its

service agent or similarly qualied persons in order to avoid a hazard.

9. Unplug the appliance before cleaning. Empty the collection tray every week

or when you notice it is full. Clean the plastic enclosure/grill with a dry cloth

10. This appliance is not intended for use by anyone (including children) with

reduced physical, sensory, or mental capabilities or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. The appliance can be used in two ways: Hanging or Standing Upright. If hanging the appliance, se two hooks and chain/cable to hang in a location which can support the weight of the appliance. If you use it standing upright, make sure to place it on a at and stable surface.7 Replacing The Bulbs Technical Details: Input AC: 220-240V 50/60Hz. Wattage: FK4812 - 12W, FK4816 - 16W, FK4820 - 20W The average working life of each bulb is 8000 hours. After this length of time the bulb will need replacing. The bulb model numbers are as follows: FK8412 – 6WT5 FK8416 – 8WT5 FK8420 – 10WT5 To replace the bulb, follow these simple instructions:

• Switch the appliance off

• Unscrew the 4 screws at the top the product to separate the mesh grill

• Unplug the faulty bulb

• Replace with the new bulb and reattach the mesh grill Protective Mesh Back Interior Side Board Right On/Off Switch Power Cord Exterior Side Board Right Transformer Collection Tray Protective Mesh Front Exterior Side Board Left High Voltage Grids Interior Side Board Left Tube Holder Tube8 Warranty 1 Year Guarantee from Shine-Mart Ltd, Trademark owners of Duronic Products. NOTE: THESE STATEMENTS DO NOT AFFECT YOUR STATUTORY RIGHTS AS A CONSUMER This product has been manufactured under the strictest or quality control procedures, and using the highest quality of materials, to ensure excellent performance and reliability. It will give very good and long lasting service, provided it is properly used and maintained. The product is guaranteed for 1 years from the date of original purchase. If any defect arises due to a faulty materials or poor workmanship, the faulty product must be returned to the original place of purchase. Refund or replacement is at the discretion of that company. Duronic Products are offered with a 1 year guarantee under the following conditions:

. T he product must be returned to the retailer with original proof of purchase.

2. The product must be installed and used in accordance with the instructions contained in

his operating manual.

. I t must be used only for domestic purposes.

t does not cover wear and tear, malicious damage, misuse, neglect, inexpert repairs o

. S hine-Mart Ltd has no responsibilities for accidental or consequential loss or damage.

. S hine-Mart Ltd are not liable to carry out any type of servicing work, under the guarantee