PHILIPS Series 3000 BT3211 - Beard trimmer

Series 3000 BT3211 - Beard trimmer PHILIPS - Free user manual and instructions

Find the device manual for free Series 3000 BT3211 PHILIPS in PDF.

📄 144 pages English EN Download 💬 AI Question 12 questions ⚙️ Specs
Notice PHILIPS Series 3000 BT3211 - page 6
Pick your language and provide your email: we'll send you a specifically translated version.
Product type Beard trimmer
Brand Philips
Model Series 3000 BT3211
Power supply Built-in rechargeable battery, charges via 100-240 V power adapter
Charging time Approximately 10 hours
Runtime 60 minutes
Cutting lengths 0.5 to 10 mm with comb; up to 20 mm with long beard comb (models BT3236/BT3237)
Length adjustment Integrated adjustment wheel
Use without comb Yes, for contours and stubborn hairs
Battery indicator Light indicator: flashes green when charging, solid green when charged, flashes orange when battery low
Cleaning Trimmer head and guard washable under water; wipe housing with a dry cloth
Maintenance Cleaning brush supplied; do not use abrasive products
Safety Keep power adapter dry; do not immerse the appliance
Included accessories Beard comb, long beard comb (depending on model), cleaning brush, power adapter, large and small storage pouches
Warranty International warranty; trimmer head not covered for normal wear and tear
Recycling Do not dispose of with household waste; built-in rechargeable battery

Frequently Asked Questions - Series 3000 BT3211 PHILIPS

How long does it take to fully charge the Philips Series 3000 BT3211 trimmer?
Full charging takes approximately 10 hours for the BT3211 model. Use only the supplied power adapter.
What is the battery runtime after a full charge?
The runtime is approximately 60 minutes for the BT3211 model.
How do I adjust the cutting length on the BT3211 trimmer?
Turn the adjustment wheel on the comb to select a length from 0.5 to 10 mm. The value is displayed in the center of the wheel.
Can I use the trimmer without the comb?
Yes, you can remove the comb for trimming contours or cutting stubborn hairs. Be careful, as the trimmer head cuts all hair it touches.
How do I clean the Philips BT3211 trimmer?
Turn off and unplug the appliance. Wipe the housing with a dry cloth. The trimmer head and guard can be rinsed under running water. Dry them by shaking gently.
What should I do if the battery indicator flashes orange?
The flashing orange indicator means the battery is almost empty. Recharge the appliance as soon as possible.
Is the trimmer waterproof?
No, the appliance is not washable. Only the trimmer head and guard can be rinsed. Never immerse the appliance in water.
What accessories are included with the BT3211 model?
The pack includes a beard comb, a cleaning brush, a power adapter, a small and a large storage pouch. The long beard comb may not be included depending on the version.
How can I optimize the battery life?
After the first charge, use the appliance until fully discharged, then recharge it. Repeat this process at least twice a year.
Where can I find spare parts for the BT3211 trimmer?
Visit www.shop.philips.com/service or contact your Philips dealer. Refer to the international warranty leaflet for consumer service contact details.

User questions about Series 3000 BT3211 PHILIPS

2 questions about this device. Answer the ones you know or ask your own.

Ask a new question about this device

Your email remains private: it is only used to notify you if someone answers your question.

Where can I find the complete instructions for the PHILIPS Series 3000 BT3211?
Frequently Asked Questions - 3 d
Response Notice-Facile

The complete instructions for the PHILIPS Series 3000 BT3211 are available directly on this page, in the PDF viewer above.

Here are the essential elements for using your trimmer effectively:

  • Power on: press the on/off button once to turn the device on or off
  • Length adjustment: turn the adjustment dial to select the desired length (0.5 to 10 mm with the standard comb, up to 20 mm with the long comb)
  • Shaving: run the trimmer against the direction of hair growth while keeping contact with the skin
  • Battery indicator: solid green light = charged, flashing green light = charging, flashing orange light = low battery
  • Maintenance: clean the trimmer head under running water, wipe the casing with a dry cloth

The trimmer fully charges in about 10 hours for the first charge, then provides 60 minutes of usage time.

Respond (be the first)
How long does it take to charge the PHILIPS Series 3000 BT3211 for the first time?
Frequently Asked Questions - 3 d
Response Notice-Facile

The first charge of the PHILIPS Series 3000 BT3211 takes about 10 hours. It is important to let the device charge completely before first use.

Charging procedure:

  • Turn off the device
  • Plug the small plug directly into the device
  • Connect the power adapter to a wall outlet (100-240V)
  • Wait about 10 hours for a full charge
  • Unplug after charging
  • Remove the small plug from the device

Charging indicators:

  • Flashing green light = device charging
  • Solid green light = full charge

Once fully charged, you can use your trimmer for 60 minutes continuously before needing to recharge.

Respond (be the first)

Download the instructions for your Beard trimmer in PDF format for free! Find your manual Series 3000 BT3211 - PHILIPS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Series 3000 BT3211 by PHILIPS.

USER MANUAL Series 3000 BT3211 PHILIPS

Illustration of an open book with a grid and an arrow indicating rotation (no text or symbols).

PHILIPS Series 3000 BT3211 - 2

English 6

Dansk 16

Deutsch 26

Español 38

Français 48

Italiano 59

Nederlands 70

Norsk 81

Português 91

Suomi 102

Svenska 112

Türkçe 122

Ελληνικα 132

General description (fig. 1)

1 Cutting unit 2 Zoom wheel 3 On/off button 4 Battery status indicator 5 Socket for small plug 6 Beard comb 7 Long beard comb 8 Cleaning brush 9 Supply unit 10 Small plug 11 Large pouch 12 Small pouch

Important safety information

Read this important information carefully before you use the appliance and its accessories and save it for future reference. The accessories supplied may vary for different products.

Danger

Prohibition sign of a faucet without any text or symbols.

- Keep the supply unit dry.

Warning

- To charge the battery, only use the detachable supply unit (XXxxxx) provided with the appliance.

- To charge the battery, only use the detachable supply unit provided with the appliance.

- The supply unit contains a transformer. Do not cut off the supply unit to replace it with another plug, as this causes a hazardous situation.

- This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

- Always check the appliance before you use it. Do not use the appliance if it is damaged, as this may cause injury. Always replace a damaged part with one of the original type.

- Do not open the appliance to replace the rechargeable battery.

Caution

Prohibition sign showing a faucet crossed out by a diagonal line, indicating no pollution or barrier (no text present).

  • This appliance is not washable. Never immerse the appliance in water and do not rinse it under the tap.
  • Only use this appliance for its intended purpose as shown in the user manual.
  • For hygienic reasons, the appliance should only be used by one person.
  • Never use compressed air, scouring pads, abrasive cleaning agents or aggressive liquids such as petrol or acetone to clean the appliance.
  • Do not use the supply unit in or near wall sockets that contain an electric air freshener to prevent irreparable damage to the supply unit.

Electromagnetic fields (EMF)

This Philips appliance complies with all applicable standards and regulations regarding exposure to electromagnetic fields.

General

- The supply unit is suitable for mains voltages ranging from 100 to 240 volts.

- The supply unit transforms 100-240 volts to a safe low voltage of less than 24 volts.

Introduction

Congratulations on your purchase and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome.

Charging

Charge the appliance fully before you use it for the first time and after a long period of disuse.

It takes approximately 10 hours (BT3205 BT3206 BT3211) or 1 hour (BT3212 BT3215 BT3216 BT3221 BT3226 BT3227 BT3236 BT3237) to fully charge the appliance.

When it is fully charged, the appliance has a cordless operating time of up to 45 minutes (BT3205), 60 minutes (BT3211 BT3212 BT3215 BT3216 BT3226 BT3236) or 90 minutes (BT3221 BT3227 BT3237).

1 Make sure the appliance is switched off. 2 Insert the small plug into the appliance. 3 Put the supply unit in the wall socket. 4 After charging, remove the supply unit from the wall socket and pull the small plug out of the appliance.

Illustration of a plug inserted into a socket with an arrow pointing to the socket (no text or symbols present).

Optimizing the lifetime of the rechargeable battery

When you have charged the appliance for the first time, we advise you to use it until the battery is completely empty. Continue to use the appliance until the motor almost stops running during a session. Then recharge the battery. Follow this procedure at least twice a year.

Battery status indicator

Simple line drawing of a bottle and a starburst shape, no text or symbols present.

  • Selected types (BT3205, BT3211, BT3212, BT3215, BT3216, BT3221, BT3227, BT3226) only.
  • When the battery is almost empty, the battery charge indicator flashes orange.
  • When the product is charging, the battery charge indicator flashes green.
  • When the battery is fully charged, the battery charge indicator lights up green continuously.

Note: The lights switch off automatically after 30 minutes.

Using the appliance

Note: Switch off and clean the appliance and attachments after each use.

- Always comb your beard and/or moustache with a fine comb before you start trimming.

Be careful when you trim for the first time. Do not move the trimmer too fast. Make smooth and gentle movements.

Switching the appliance on and off

- Press the on/off button once to switch the appliance on or off.

Diagram showing a hand pressing a button labeled 'Power' with an arrow indicating direction or force application.

Trimming with comb

Note: When you trim for the first time, start at the highest length setting to familiarize yourself with the appliance.

Use the trimming comb attached to the cutting element to trim your beard and moustache in your preferred style. Turn the zoom wheel to choose from length settings ranging from 0.5mm to 10mm (1/32in. to 13/32in.). With the long beard comb you can choose from length settings ranging from 11mm to 20mm (BT3236 BT3237).

PHILIPS Series 3000 BT3211 - Trimming with comb - 1

1 Slide the trimming comb straight into the guiding groove of the appliance. 2 Turn the zoom wheel to the desired setting. The desired hair length setting is shown in the center of the zoom wheel.

3 Switch the appliance on.

4 To trim most effectively, move the product against the hair growth direction. Make sure that the surface of the comb always stays in contact with the skin.

Since all hairs do not grow in the same direction, you may want to try different trimming positions (i.e. upwards, downwards, or across). Practice is best for optimum results.

Diagram of a mechanical clamp or bracket with arrows indicating force direction (no text or symbols).

5 Regularly remove cut hair from the comb. If a lot of hair has accumulated in the comb, remove it from the appliance and blow and/or shake out the hairs. The selected hair length setting does not change when the comb is removed.

6 Switch off and clean the appliance after each use.

Trimming for 'stubble look'

1 Be certain trimming comb is on product and use setting 0.5mm (1/32in.) to create a 'stubble look' trim.

1 0.5

Trimming without comb

Use the trimmer without the trimming comb to trim the edges and single hairs.

Be careful when you trim without the comb as the cutting unit will remove every hair it touches.

1 Pull the trimming guard straight off the appliance.

Illustration showing a hairpin being brushed down and shaped like a man's face (no text or symbols present).

Cleaning

2 Switch the appliance on. 3 Make well-controlled movements. Touch the hair lightly with the trimmer.

Never use scouring pads, abrasive cleaning agents or aggressive liquids such as gasoline or acetone to clean the product.

Never dry the trimmer teeth with a towel or tissue, as this may damage the trimmer teeth.

1 Switch off the appliance and disconnect it from the power outlet. 2 Wipe the housing of the appliance with a dry cloth.

Caution: Never immerse the appliance in water, or rinse it under the tap. Only the cutting unit and guard can be rinsed under the tap.

3 Remove the comb and clean it with the cleaning brush and/or rinse it under the tap.

4 Remove the cutting unit by pushing against the teeth of the cutting unit and clean it with the brush or rinse it under the tap.

PHILIPS Series 3000 BT3211 - Cleaning - 1

Diagram illustrating two steps of a hand holding a device, with arrows indicating direction and labeled parts.

5 Carefully shake off excess water and let air dry completely. 6 Insert the lug of the cutting unit into the guiding slot and push the cutting unit back onto the appliance.

Storage

- Store the product in the pouch supplied. Make sure the product is dry before you store it in the pouch.

Ordering accessories

To buy accessories or spare parts, visit www.shop.philips.com/service or go to your Philips dealer. You can also contact the Philips Consumer Care Center in your country (see the international warranty leaflet for contact details).

Recycling

PHILIPS Series 3000 BT3211 - Recycling - 1

- This symbol means that this product shall not be disposed of with normal household waste (2012/19/EU).

PHILIPS Series 3000 BT3211 - Recycling - 2

- This symbol means that this product contains a built-in rechargeable battery which shall not be disposed of with normal household waste (2006/66/EC). Please take your product to an official collection point or a Philips service center to have a professional remove the rechargeable battery.

- Follow your country's rules for the separate collection of electrical and electronic products and rechargeable batteries. Correct disposal helps prevent negative consequences for the environment and human health.

Warranty and support

If you need information or support, please visit www.philips.com/support or read the international warranty leaflet.

Warranty restrictions

Cutting units are not covered by the terms of the international warranty because they are subject to wear.

- Only selected types (BT3205 BT3211 BT3212 BT3215 BT3216 BT3221 BT3227 BT3226).

Trimming with comb

Cleaning

Diagram showing welding process with labeled steps 1 and 2, indicating tool path and welding angle.

Storage

Trimming with comb

Trimming with comb

Cleaning

Storage

Extend the life of the rechargeable battery

Trimming with comb

Trimming with comb

Cleaning

Illustration of a hand holding a device with an arrow indicating upward motion (no text or symbols)

Diagram showing two steps of welding or cutting process with labeled arrows and motion indicators.

Storage

Ordering accessories

Cleaning

- Only selected types (BT3205 BT3211 BT3212 BT3215 BT3216 BT3221 BT3227 BT3226).

Trimming with comb

Cleaning

Trimming with comb

Cleaning

Trimming with comb

Cleaning

75% recycled paper

75% recycled paper

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : PHILIPS

Model : Series 3000 BT3211

Category : Beard trimmer