Natt - Stroller Lionelo - Free user manual and instructions

USER MANUAL Natt Lionelo

IMPORTANT – READ CAREFULLY AND KEEP FOR

FUTURE REFERENCE WARNING

1. Never leave the child unaended.

2. Ensure that all the locking devices are engaged before use.

To avoid injury ensure that the child is kept away when unfolding and folding this product.

4. Do not let the child play with this product.

Check that the pram body or seat unit or car seat aachment devices are correctly engaged before use.

7. This product is not suitable for running or skang.

The product is suitable for a child weighing up to 22 kg or up to 4 years (whichever comes rst).

The lowest backrest posion is recommended for newborns.

10. If you want to take the baby out of the stroller, or put it in it,

make sure the parking device is locked.

11. The maximum allowable load of the basket is 3 kg.

Any load aached to the handle and / or the back of the backrest and / or the sides of the product will aect the stability of the stroller.

13. Only one child can use the product at a me.

14. Do not use accessories that have not been approved by the

Use only spare parts supplied or recommended by the manufacturer.

16. Do not use the product on stairs.

4. Seat adjustment strap

Unfolding the stroller To unfold the stroller, remove the locking mechanism (g. 1, 1A), then grasp the handle and dynamically pull it upward. The stroller will unfold on its own (g. 1B). A click will signal the correct unfolding of the stroller. Installaon and removal of front wheels Note! Pay aenon to the installaon of the le and right wheel on the correct side of the stroller frame. Make sure that the bolt inside the wheel is on the inside of the frame.

Insert the front wheel stem into the corresponding holes in the frame of the stroller (g. 2).

To lock the wheels for straight-ahead travel, move the lock (g. 3) in the outward direcon. To unlock, move the lock towards the inside.

3. To remove the front wheels, press the buon (g. 4) and pull them out of

the stroller frame. Installaon and removal of rear wheels

Insert the rear wheel stem into the corresponding holes in the stroller frame (g. 5).

2. To remove the rear wheels, pull the metal handle (g. 6) and pull them out

Insert the fastener components into the main buckle (g. 11). A correct connecon will signal a click.

Adjust the length of the harness to the child’s body using the buckles located on the straps (g. 12).

3. To unbuckle the harness, press the buon located in the buckle (g. 13).

Harness adjustment To adjust the harness, remove the buckle through the hole located in the seat and put it in the desired place. Make sure that the buckles are in the correct, stable posion aer reposioning. Installaon and removal of the safety bar

Insert the safety bar into the connectors on the stroller frame (g. 7). Correct installaon will signal a click.

To remove the safety bar, press the release buons located on the inside of the frame. Push the buons independently on both sides of the stroller, then pull out the safety bar. Footrest adjustment

To lower the footrest, press both adjustment buons (g. 8) and set the footrest to the desired posion.

2. To raise the footrest, li it and move it to the desired posion.

A click will signal that the footrest is locked in the selected posion. Seat adjustment Note! Do not adjust the seat when there is a child in the stroller. To change the posion of the seat, use the buckle located on the adjustment strap at the back of the backrest (g. 9).

1. Slide the buckle down to the end of the adjustment strap to adjust the seat

to the reclining posion.

2. Slide the buckle upward to adjust the seat to a sing posion.

Parking device Press to lock the wheels and stop the stroller. Li to unlock (g. 10).‑ 11 ‑

1. To fold the stroller, move both folding levers at the same me (g. 14), then

push the handle forward.

Press down on the stroller to make sure it is folded correctly. Make sure that the lock is correctly installed (g. 15) Cleaning and maintenance

• The cover and basket can be hand-washed at 30°C.

• Clean the frame of the stroller with a damp cloth and mild cleaning agents.

Regularly check the condion of the stroller and wheels. Do not use accessories that are not included. Use only original spare parts.

• Do not expose the stroller to direct sunlight for too long.

• Do not expose the stroller to salt water, as this can cause rust. The photos are for reference only, the actual look of the products may dier from the ones shown in the pictures.‑ 12 ‑PL WAŻNE! PRZECZYTAJ UWAŻNIE I ZACHOWAJ NA