M18 266520 - Drill MILWAUKEE - Free user manual and instructions
Find the device manual for free M18 266520 MILWAUKEE in PDF.
📄
Document temporarily unavailable
The manual is currently being transferred to our new server. It will be accessible again in a few hours. Thank you for your patience.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Impact Wrench / Cordless Screwdriver |
| Brand | Milwaukee |
| Model | M18 2662-20 / 2663-20 / 2664-20 / 2665-20 |
| Rated Voltage | 18 V DC |
| Battery Type | M18™ |
| Charger Type | M18™ |
| No-Load Speed (RPM) | 0 - 2 000 min⁻¹ |
| Impacts per Minute (IPM) | 0 - 2 500 (models 2662, 2664, 2665) / 0 - 2 800 (model 2663) |
| Drive Shank | 1/2" Square (2662-20) / 1/2" Square with Ring (2663-20) / 3/4" Square (2664-20) / 7/16" Hex (2665-20) |
| Operating Ambient Temperature | -18 °C to 50 °C (0 °F to 125 °F) |
| Weight (with Battery) | Approximately 1.6 kg (depending on model) |
| Length | Approximately 200 mm |
| Power Source | Rechargeable Lithium-Ion Battery |
| Main Functions | Drilling, screwdriving, tightening and loosening fasteners |
| Maintenance and Cleaning | Clean with a damp cloth and mild soap; do not use solvents |
| Safety | Eye protection required; use a ground fault circuit interrupter in wet environments |
| Spare Parts and Repairability | Repairs exclusively by a Milwaukee authorized service center |
| General Information | 5-year warranty (except exclusions); visit milwaukeetool.com |
Frequently Asked Questions - M18 266520 MILWAUKEE
How to insert and remove the battery on the Milwaukee M18 impact wrench?
To remove the battery, press the release buttons on the battery and pull it out of the tool. To insert, slide it into the tool body until it clicks firmly. Always lock the trigger or remove the battery when the tool is not in use.
How to change the rotation direction of the tool?
Use the direction selector located above the trigger. Push it to the right side for forward rotation (clockwise), to the left side for reverse (counterclockwise). The center position locks the trigger. Wait for the motor to stop completely before changing direction.
How to adjust the speed of the impact wrench?
The speed is variable from 0 to 2,000 rpm. It is controlled by the pressure on the trigger: the more you press, the higher the speed. Release the trigger to stop the tool.
What accessories can I use with this impact wrench?
Use only impact rated sockets and accessories recommended by Milwaukee. For model 2665-20 (hex shank), use drill and screwdriver bits. Never use standard sockets which could shatter.
What are the essential safety precautions?
Always wear ANSI Z87.1 certified eye protection. In dusty environments, use a dust mask. Keep hands away from moving parts. Do not wear loose clothing or jewelry. Ensure the work area is clean and well-lit.
How to maintain the Milwaukee M18 impact wrench?
Clean the tool with a damp cloth and mild soap. Never immerse it in water. Keep the ventilation slots clean and free of debris. Regularly check the alignment of moving parts. For any repairs, contact a Milwaukee authorized service center.
What to do if the tool does not start with a charged battery?
Clean the metal contacts between the battery and tool. If the problem persists, return the tool, battery, and charger to a Milwaukee authorized service center for inspection.
What is the warranty for this tool?
Milwaukee offers a 5-year warranty on this model (except exclusions). It covers defects in material and workmanship. You must return the tool with proof of purchase to an authorized service center. Normal wear (brushes, chucks, etc.) is not covered.
Can I use this impact wrench for drilling?
Model 2665-20 (hex shank) is designed to be used with drill bits. The other models (2662, 2663, 2664) are intended for tightening/loosening fasteners. Check the drive shank type of your tool before drilling.
How to attach and remove a socket on the square drive?
For square drives with ring (2663-20, 2664-20): align the socket with the drive and push firmly until it clicks. To remove, pull it directly. For model 2662-20 (with pin): align the socket hole with the release rod, hold the rod pressed while pushing the socket, then release. To remove, insert a thin object into the socket hole to press the rod and pull.
User questions about M18 266520 MILWAUKEE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Drill in PDF format for free! Find your manual M18 266520 - MILWAUKEE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. M18 266520 by MILWAUKEE.