SHX01HL2000 - Heating SHX - Free user manual and instructions

USER MANUAL SHX01HL2000 SHX

White portable heating fan with wavy grille and two side control knobs (no visible text or symbols)

HERZLICHEN GLÜCKWUNSCH!

VIELEN DANK, DASS SIE SICH FÜR DIESES PRODUKT VON SHX ENTSCHIEDEN HABEN.

Labeled diagram of a heating fan with numbered parts for identification

1) Ansauggitter (Rückseite)
2) Ausblasgitter
3) Bedienungsregler
4) Signalleuchte
5) Thermostatregler
6) Handgriff

White portable heating fan with ventilation grille and two side fans (no visible text or symbols)

FÉLICITATIONS !

MERCI D'AVOIR OPTÉ EN FAVEUR DE CE PRODUIT DE SHX.

Labeled diagram of a heating fan with numbered parts for identification

White portable heating fan with ventilation grille and two side fans (no visible text or symbols)

CONGRATULAZIONI!

GRAZIE PER AVER DECISO DI ACQUISTARE QUESTO PRODOTTO DI SHX.

Labeled diagram of a heating fan with numbered parts for identification

White portable heating fan with ventilation grille and two side fans (no visible text or symbols)

HARTELIJK GEFELICITEERD!

HARTELIJK BEDANKT DAT U VOOR DIT PRODUCT VAN SHX HEBT GEKOZEN.

Labeled diagram of a heating fan with numbered parts for identification

White portable electric heater with visible cooling fins and two side fans (no text or symbols)

GRATTIS!

TACK FÖR ATT DU HAR BESTÄMT DIG FÖR DEN HÄR PRODUKTEN FRÅN SHX.

INNEHÅLLSFÖRTECKNING

SE

Labeled diagram of a heating fan with numbered parts for identification

1) Insugsgaller (på baksidan)
2) Utblåsgaller
3) Inställningsreglage
4) Signallampa
5) Termostatregulator
6) Handtag

White portable heating fan with wavy grille and two side control knobs (no visible text or symbols)

SRDEČNĚ BLAHOPŘEJEME!

DĚKUJEME, ŽE JSTE SE ROZHODLI PRO TENTO PRODUKT SPOLEČNOSTI SHX.

Labeled diagram of a heating fan with numbered parts for identification

White portable electric heater with visible cooling fins and two side fans (no text or symbols)

SRDEČNE BLAHOŽELÁME!

ĎAKUJEME, ŽE STE SA ROZHODLI PRE TENTO VÝROBOK OD FIRMY SHX.

Labeled diagram of a heating fan with numbered parts for identification

White portable electric heater with ventilation grille and two side fans (no visible text or symbols)

SRDEČNE BLAHOŽELÁME!

ĎAKUJEME, ŽE STE SA ROZHODLI PRE TENTO VÝROBOK OD FIRMY SHX.

Labeled diagram of a heating fan with numbered parts for identification

White portable electric heater with ventilation grille and two side fans (no visible text or symbols)

FELICITĂRI!

VĂ MULȚUMIM CĂ AȚI DECIS SĂ ACHIZIȚIONAȚI ACEST PRODUSUL DE LA SHX.

Labeled diagram of a heating fan with numbered parts for identification

1) Grilaj de aspirare (partea posterioară)
2) Grilaj de evacuare
3) Selector de operare
4) Lampă de semnalizare
5) Termostat
6) Mâner

White portable heating fan with ventilation grille and two side fans (no visible text or symbols)

CONGRATULATIONS!

THANK YOU FOR PURCHASING THIS SHX PRODUCT.

This product is intended for use in well-insulated areas and for occasional use only.

TABLE OF CONTENTS

EN

Important information on safety, place of use and electrical connections

Recycling, disposal and Declaration of Conformity

Scope of delivery

Description of the appliance

Place of use and connection to power supply

Starting up and functions

Safety features

Cleaning and maintenance

Technical information

Required data for single-room electrical heating devices

PLEASE READ THE OPERATING MANUAL CAREFULLY BEFORE BEGINNING ASSEMBLY,, INSTALLATION, OPERATION OR MAINTENANCE. PROTECT YOURSELF AND OTHERS BY FOLLOWING THE SAFETY INSTRUCTIONS. FAILURE TO COMPLY WITH THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE AND/OR LOSS OF CLAIMS UNDER WARRANTY.

Intended Use

This appliance is intended exclusively for the heating of domestic living spaces and may not be used for any other purpose.

IMPORTANT INFORMATION ON SAFETY, STANDARDS AND ELECTRICAL CONNECTIONS

1. Use this appliance only in accordance with the guidelines in this operating manual. Any other use not recommended by the manufacturer may result in fire, electrical shock or personal injury.

2. This appliance is intended exclusively for the heating of domestic living spaces and may not be used for any other purpose.

3. Remove the packaging and check that the appliance is not damaged. If you are in doubt, do not use the appliance and contact your dealer.

4. Before connecting to the mains power supply, check that the mains voltage and type matches the information provided on the type plate of the appliance.

5. The electrical socket to which you connect the appliance must not be defective or loose, must be suitable for the current load required, and above all must be reliably earthed.

1. Avoid using an extension cable, because this could overheat and cause a fire.

2. If the power supply cable is damaged, it must be replaced by the manufacturer or an authorised service centre to avoid all possible risks. Do not twist, kink or sharply bend the power supply cable.

3. Do not situate the appliance directly beneath a wall socket. In case of doubt, have your electrical installation checked by a qualified electrician.

4. It is forbidden to adapt or modify the properties of this appliance in any way. Use only replacement parts and accessories recommended by the manufacturer (failure to do so may result in loss of warranty cover).

5. Do not use this heater if it shows visible signs of damage.

6. For any repairs to the appliance, the power plug or the cable, always contact the customer services authorised by the manufacturer.

7. This appliance is for use by adults only.

1. Children over 3 and under 8 years may only switch the appliance on or off under supervision or if they have been instructed in its safe use and understand the resultant dangers, on the condition that the appliance is positioned or installed in its normal place of use. Children over 3 and under 8 years must not be allowed to insert the plug into the socket, alter the settings, clean the appliance or perform user maintenance on the appliance.

2. Do not operate the appliance unattended. Whenever you leave the room, always switch off the appliance.

3. Do not use the appliance in small rooms where people are present who are unable to leave the room by themselves, unless they are under constant supervision.

4. Do not allow children to play with the appliance. Keep children under 3 years away from the appliance unless they are under constant supervision.

5. Keep the packaging materials away from children. If swallowed, these pose a risk of suffocation.

6. This appliance is not equipped with a thermostat for controlling the room temperature.

7. The appliance is not suitable for continuous or high-precision operation.

8. This appliance is for use in dry indoor spaces only.

1. Do not use this heater if it has previously been dropped.

2. Do not use the appliance near water or high humidity, e.g. in damp cellars, or hear swimming pools, baths or showers. Make sure that water cannot get into the appliance.

3. Do not use the appliance in close proximity to petrol, gas, oil, alcohol or other explosive or flammable liquids or gases.

4. To minimise the risk of fire, ensure a distance of at least one metre between the air outlet of the appliance and any flammable materials such as:

a. Pressurised containers (e.g. spray cans)
b. Furniture
c. Textiles of any kind

1. This heater should only be operated on a level, stable surface.

2. Never cover the appliance while it is in operation or while cooling down after use.

3. Ensure that no objects come between the appliance and the mounting wall that could touch the heating surface.

4. Always switch the appliance off before unplugging it.

5. Caution: certain parts of this appliance may become very hot and cause burns. Take particular care if children or vulnerable persons are present. Always allow the

appliance to cool down before cleaning it or removing it from its mounting.

1. Unplug the appliance when you are not using it and before cleaning it or performing any maintenance.

Do not allow children to clean or perform user maintenance on the appliance without supervision.

1. To avoid electric shocks, do not touch the plug with wet hands.

ATTENTION	RISK OF INJURYThis appliance becomes hot during use.Never touch the appliance while it is in use → this may result in severe BURNS.
ATTENTION	RISK OF FIREDo not cover the appliance while it is in use.
ATTENTION	SAFE DISTANCEMaintain a safe distance of at least one metre from flammable items such as furniture, curtains, paper and similar.PLACE OF USEPosition the appliance in such a way that air can flow in and out without hindrance.RISK OF BURNSThis appliance becomes very hot during use and can cause burns. Take particular care if children or vulnerable persons are present.RISK OF OVERHEATINGDo not use the appliance in rooms with a volume less than 4m3.

Symbol markings on the appliance

Symbol:

Meaning:

Caution. Do not cover

The symbol on the device indicates that it is not permitted to suspend any item (e.g. towels, clothing etc.) above the appliance or directly in front of it. To prevent overheating and the risk of fire, do not cover the heater.

Symbol:

Meaning:

Protection class 2

This symbol indicates that the appliance is classified as protection class 2 (double insulated).

Class 2 appliances are not connected to the earth of the electricity supply. Instead, they feature an enhanced or doubled insulation up to the rated insulation voltage between the live parts and the parts that can be touched. Accordingly, electrically conductive surfaces or other parts that can be touched are isolated by an enhanced or doubled insulation from live parts.

Recycling, disposal and Declaration of Conformity

	RECYCLINGThe packaging materials can be recycled. It is recommended that you dispose of them in separated waste.
	DISPOSALThe pictogram with the crossed out dustbin indicates that electrical and electronic appliances must be disposed of separately from household waste (WEEE). Electrical and electronic appliances can contain harmful and environmentally hazardous materials. Do not dispose of them in unsorted residual waste, but at a registered collection centre for waste electrical and electronic equipment. By doing so, you will help to conserve resources and protect the environment. For further information please consult your dealer or your local authorities. Directive 2012/19/EU
	DECLARATION OF CONFORMITYWe hereby confirm that this article complies with the essential requirements, regulations and guidelines of the EU. The detailed declaration of conformity can be viewed at any time via following link:https://www.schuss-home.at/downloads

Errata and technical changes reserved.

Scope of delivery

• Fan heater
• Operating manual

Description of the appliance

Labeled diagram of a heating fan with numbered parts for identification

1) Air inlet grille (rear)
2) Outlet grille
3) Operating control
4) Signal lamp
5) Thermostat adjustment
6) Handle

Place of use and connection to power supply

1. Remove all packaging material and keep it out of reach of children. After removing the packaging, check for any damage or signs of faults or defects in the appliance. If in doubt, do not use the appliance and contact your dealer to examine and/or replace it.
2. Select a suitable location for the fan heater, at least one metre from any obstacle, walls or flammable materials (see also the safety information).
3. Ensure that the fan heater is always placed upright on a stable, smooth and horizontal surface.
4. Check that the control is set to OFF (O).
5. Unwind the power cable completely and insert the plug into a suitable 230 V socket. To prevent overloading to the supply, do not connect any other appliance to the same mains circuit.

s

Starting up and functions

• Turn the thermostat up to maximum (clockwise as far as it will go).
• Operate the fan heater by turning the function controller to one of the three positions:

Fan only (thermostat set to maximum)

I Heating at half power (1000 W)

II Heating at full power (2000 W)

The indicator lamp on the front of the unit now lights up. The most economical way of using the heater is to heat the room up at full power and then to switch to half power to maintain the temperature.

• The fan operates at the same speed for both half and full power, and the only difference is the number of heating elements used.
• Once the desired temperature is reached, turn the thermostat controller slowly down until you hear a click. The temperature is now set.

The fan heater will switch itself automatically on and off to maintain the set temperature. When the unit switches off, the signal lamp goes out. To set a higher or lower temperature, simply turn the thermostat controller clockwise or anticlockwise respectively.

- To switch the fan heater off, set the power controller to OFF (O). The signal lamp goes out. The signal lamp thus indicates that the fan heater is operating and not simply whether it is connected to the mains supply or not.

- Now pull the mains plug from the socket.

Safety features

The fan heater features tip protection that switches the appliance off if it should fall over unexpectedly. When you stand it up again, it resumes operation.

But to do this, first switch the appliance off, remove the plug from the power socket and check the fan heater for any damage. Do not use the appliance if it is damaged or does not function correctly. Take it for inspection and if necessary for repair.

NOTE

Overheating protection causes the fan heater to cut out if it becomes too hot.

This can occur if the heater cannot fully expel all its heat or if too little fresh air is available for it to draw in. The usual cause of this is that something is covering or partly covering the heater or that the air inlet or outlet grille is blocked or clogged; other causes are the presence of dirt or a positioning of the unit too close e.g. to a wall.

If the overheating protection of the fan heater cuts out, set the function controller to OFF (O), then unplug from the power socket and allow the unit to cool down. You should remove the cause of the overheating before operating the fan heater again.

If you cannot identify the cause of the overheating and the problem persists, stop using the heater and take it for examination and possible repair.

Cleaning and maintenance

Keep the fan heater clean. The build-up of dust and dirt in the appliance is one of the commonest causes of overheating. You should therefore remove such dirt regularly. Before cleaning or performing maintenance, switch the fan heater off, remove the plug from the socket and allow to cool.

- Clean the outside of the appliance regularly with a dry or very slightly moistened cloth. Do not use any abrasive soap, spray, detergents or scouring agents, wax, glazing agents or other chemical solutions.

- Use a vacuum cleaner to carefully remove dirt and dust from the grilles and check that the air inlets and outlets are clean. When cleaning these, take care not to touch or damage any internal parts.

- The fan heater does not contain any other components that require maintenance.

- When the heating season ends, carefully pack the fan heater away, where possible in its original packaging. Store it upright in a cool, dry and dusty-free place.

- When the appliance reaches the end of its useful life, do not dispose of it in the domestic waste. Take it instead to a local collection point for electrical equipment. Care will then be taken to recycle any re-usable materials.

TECHNICAL INFORMATION

Article number:	SHX01HL2000
Input voltage:	220-240 V
Frequency:	50 Hz
Power range:	2000 W
Controllable parameters:	0 – 1000 – 2000 W
Thermostat:	Yes
Oscillating:	No
Weight:	0.85 kg
Dimensions	13 × 22 × 26 cm
Contact address for further information:	Schuss Home Electronic GmbH Scheringgasse 3, A-1140 Wien Serviceline: [phone] www.schuss-home.at FB-Nr: 236974 t / FB-Gericht: Wien

Required data for single-room electrical heating devices

Article number SHX01HL2000
Information	Symbol	Value	Unit		Information	Unit
Heat output					Single-room electric storage heaters only:Method of heat transfer control
Nominal heat output	P_nom	2.0	kW		Manual control of heat transfer with integrated thermostat	No
Minimum heat output (guideline)	P_min	0.0148	kW		Manual control of heat transfer with feedback of room and/or outside temperature	No
Maximum continuous heat output	P_max,c	2.000	kW		Electronic control of heat transfer with feedback of room and/or outside temperature	No
Auxiliary current consumption					Fan-assisted heat outlet	No
At Nominal heat output	eI_max	0	kW		Type of heat output/room temperature control
At Minimum heat output	eI_min	0	kW		Single heat output level, no room temperature control	No
In standby mode	eI_sB	0.000	kW		Two or more manually settable output levels, no room temperature control	No
					Room temperature control with mechanical thermostat	Yes
					With electronic room temperature control	No
					Electronic room temperature control and timed control through the day	No
					Electronic room temperature control and timed control through the week	No
					Other control options
					Room temperature control with presence detection	No
					Room temperature control with detection of open windows	No
					With remote control option (WiFi)	No
					With adaptive start-up control	No
					With operating time limiter	No
					With ball-type sensor	No
Contact information:	Schuss Home Electronic GmbH Scheringgasse 3, A-1140 Wien Österreich

WARRANTY

By purchasing this SHX quality product, it means you have decided to place trust in durability, reliability and innovation.

For this SHX appliance, we grant a warranty period of 2 years from the date of purchase valid in Austria and Germany!

If, contrary to expectations, service work on your appliance is still necessary during this period, we hereby guarantee either free repairs (spare parts and working time) or (at the discretion of Schuss) that we will replace the product. If it is not possible to either repair or exchange the product for economic reasons, we reserve the right to create a time value credit.

In any case, please contact the customer hotline as a first step (see the operating manual – 'contact addresses for further information and service line').

We would like to point out that repair work that has not been performed by authorised contract workshops will immediately terminate the validity of this warranty.

This warranty does not cover:

• Damage due to non-adherence to the operating manual
  • Repair or replacement of parts due to normal wear and tear
• Appliances that are used commercially, even in part
• Appliances mechanically damaged due to external influence (any fall(s), impact(s), breakage(s), improper use, etc.) as well as signs of wear and tear of an aesthetic nature

• Appliances that have been improperly treated

- Appliances that have not been opened by our authorised service workshop

• Unfulfilled consumer expectations

- Damage caused by force majeure, water, lightning and overvoltage

- Appliances that have had their type designation and/or serial number on the appliance changed, deleted, made illegible or removed

• Defects due to extreme contamination

- Services outside our contract workshops, the transport costs to either an authorised workshop or to us and back, and the associated risks

We would like to expressly point out that a fixed amount of €60 (indexed basis CPI 2015, June 2020) will be charged within the warranty period in the event of operating errors or if no error has been detected.

The provision of a warranty service (repairs or replacement of the appliance) does not extend the absolute warranty period of 2 years from the date of purchase.

The 2-year warranty is only valid upon presentation of the proof of purchase (must include the name and address of the dealer as well as the complete appliance designation) and the corresponding warranty certificate, on which the appliance type and the serial number (on the box and on both the back and underside of the appliance) are to be noted! Without presenting the warranty certificate, only the legal warranty applies!

We would like to expressly point out that the statutory warranty rights are unaffected by this warranty and continue unabated.

A liability for damage on the part of Schuss Home Electronic GmbH and its vicarious agents only exists in the event of gross negligence or intent. In any event, liability for lost profits, expected but not occurred savings, consequential damage and damage arising from claims of third parties is excluded.

The contact address of the respective service workshop is available on our homepage www.schuss-home.at.

Congratulations on making your choice. We wish you a lot of pleasure with the SHX appliance!

ADDRESS

SHX Vertrieb

Schuss Home Electronic GmbH

A-1140 Vienna (Austria), Scheringgasse 3

Tel.: [phone]

Type designation:

Serial number:......