460405.0 S - Lawn mower Güde - Free user manual and instructions

USER MANUAL 460405.0 S Güde

ENGLISH Please read the instructions carefully before starting the machine.

Scanned document page with Chinese text and a circular logo at the bottom right.

Collection of eight labeled mechanical components and accessories, including rods, bolts, gears, and housing (no text or symbols visible)

Exterior view of a lawn mower with visible blades and handle (no text or symbols)

Illustration of mechanical components including a wheel, wrench, and clamped device (no text or symbols)

Two black plastic electronic components with cutouts, shown from different angles (no text or symbols visible)

Black plastic object with three legs and a central vertical seam, labeled '13' in the top-left corner (no other text or symbols)

DE	Montage	SL	Montaža
EN	Assembly	HR	Montaža
FR	Assemblage	BG	MONTAK
IT	Montaggio	RO	Montaj
NL	Montage
CZ	Montáž
SK	Montáž
HU	Szerelés

2-4

DE	Inbetriebnahme	SL	Uvedba v pogon
EN	Starting-up the machine	HR	Puštanje u rad
FR	Mise en service	BG	Пускане в действие
IT	Messa in funzione	RO	Punerea în funcțiune
NL	Inbedrijfstelling
CZ	Uvedení do provozu
SK	Uvedenie do prevádzky
HU	Üzembe helyezés

5-8

DE	Mähanweisungen	SL	Napotki za košnjo
EN	Cutting instructions	HR	Upute za sječenje
FR	Consignes de tonte	BG	Инструкции за сечене
IT	Istruzioni per taglio	RO	Instrucțiuni pentru cosit
NL	Aanwijzingen voor het maaien
CZ	Pokyny k sečení
SK	Pokyny na kosenie
HU	Utasítás kaszáláshoz

9-14

DE	Betrieb	SL	Delovanje
EN	Operation	HR	Rad
FR	Fonctionnement	BG	Păbota
IT	Esercizio	RO	Funcționare
NL	Gebruik
CZ	Provoz
SK	Prevádzka
HU	Üzemeltetés

15

DE	Reinigung / Wartung	SL	Čiščenje / Vzdrževanje
EN	Cleaning / Maintenance	HR	Čiščenje / Održavanje
FR	Nettoyage / Entretien	BG	Чистене / Поддръжка
IT	Pulizia / Manutenzione	RO	Curățare / Întreținere
NL	Schoonmaken / Onderhoud
CZ	Čištění / Údržba
SK	Čistenie / Údrzba
HU	Tisztítás / Karbantartás

16

1	DE Montage	SL Montaža
	EN Assembly	HR Montaža
	FR Montage	BG Монтаж
	IT Montaggio	RO Montaj
	NL Montage
	CZ Montáž
	SK Montáž
	HU Szerelés

Lhouette of a lawn mower with attached blades and handle, shown in two-step view (no text or symbols)

L how to adjust a lawn mower on a lawn, showing mechanical components and wiring (no text or symbols visible)

Lhouette of a lawn mower with a curved arrow indicating rotational motion (no text or symbols)

Lhouette of a lawn mower with attached circuit board and directional arrows indicating motion (no text or symbols)

DE Montage

SL Montaža

EN Assembly

HR Montaža

FR Montage

BG Монтаж

IT Montaggio

RO Montaj

NL Montage

CZ Montáž

SK Montáž

HU Szerelés

1

4 4 + 5

TIP

1	DE Montage	SL Montaža
	EN Assembly	HR Montaža
	FR Montage	BG Монтаж
	IT Montaggio	RO Montaj
	NL Montage
	CZ Montáž
	SK Montáž
	HU Szerelés

Lhouette of a lawn mower with attached tool, showing mechanical components and motion arrows (no text or symbols)

Diagram of a lawn mower with labeled parts and mechanical assembly instructions

3 10

Mechanical assembly diagram showing a wheel-mounted component being adjusted, with three sequential steps (no text or symbols)

EN Cutting height setting

Diagram showing the mounting mechanism of a lawn mower with labeled parts and directional arrows indicating motion.

2	DE Akku	SL Akumulator
	EN Battery	HR Akumulator
	FR Batterie	BG Акумулатор
	IT Accumulatore	RO Acumulator
	NL Accu
	CZ Akumulátor
	SK Akumulátor
	HU Akkumulátor

Diagram illustrating battery charging process with motor, battery, and power plug components

AUTO-STOP A UTO- S T O P

Close-up of a car's internal battery pack with open lid and plastic cover, showing mechanical components and airflow direction (no text or symbols)

Close-up of a car interior showing mechanical components and a transparent hood (no visible text or symbols)

3 CLICK

Close-up of a car interior showing a mechanical device with a curved arrow indicating rotation (no text or symbols)

DE	Akku	SL	Akumulator
EN	Battery	HR	Akumulator
FR	Batterie	BG	Акумулатор
IT	Accumulatore	RO	Acumulator
NL	Accu
CZ	Akumulátor
SK	Akumulátor
HU	Akkumulátor

	95871	40V / 2,5 Ah
	95870	40V / 2,6 Ah
	95872	40V / 3,0 Ah
	95875	40V / 1,0 A
	95874	40V / 3,0 A

Diagram illustrating the installation of a lawn mower with labeled components and lighting controls

2

DE Inbetriebnahme

EN Starting-up the machine

FR Mise en service

Top-down view of a lawn mower with visible blades and handle (no text or symbols)

Close-up of a mechanical component with an arrow pointing upward, no visible text or symbols

EN Any works / adjusting on the machine to be only performed with the engine switched off, contact key taken out and when the mowing blade is not moving.

EN Cutting instructions

FR Consignes de tonte

Safety warning illustration showing a person using a lawn mower to reduce noise and trash, with hazard symbols and icons.

Illustration showing a person using a lawn mower to trim a lawn, with corresponding pictograms for each action.

STOP

Black-and-white illustration of a person crossing a road with a crossbar, next to a lawn mower and a warning sign (no text or symbols on the diagram itself)

Silhouette of a person pushing a cart with a checkmark above, no text or symbols present

Silhouette of a person pushing a cart with a curved arrow, no text or symbols present

Illustration of a person using a lawn mower to cut the wheel, with a warning sign above (no text or symbols on the diagram itself)

DE	Mähen	SL	kosite
EN	mow	HR	kositi
FR	tondre	BG	koся
IT	falciare	RO	cosi
NL	maaien
CZ	sekat
SK	kosit'
HU	szénaboglya

STOP

Illustration of a lawn mower with grass blades, showing blade and wheel (no text or symbols)

Side view of a lawn mower with visible tire, wheels, and open hood (no text or symbols)

Side view of a small electric motor with open lid and wheels, no visible text or symbols

DE Mähen - Sammeln

EN mow - collect

FR tondre - collecter

Side profile illustration of a grassy tractor with visible blades and wheels, no text or symbols present

1 9 CLICK

Side view of a lawn mower with visible tire, wheels, and open hood (no text or symbols)

i 3

DE Mähen - Sammeln
EN mow - collect
FR tondre - collecter
IT falciare - raccogliere
NL maaien - verzamelen
CZ sekat - sbírat
SK kosit' - zbierat'
HU szénaboglya - gyűjt

SL kosite - zbirati

HR kositi - prikupiti

Diagram showing a lawn mower with labeled parts and directional arrows indicating motion or assembly.

Simple illustration of a dark rectangular object with grass at its base and a checkmark above it (no text or symbols)

STOP

DE Mähen - Mulchen

EN mow - mulching

FR tondre - paillage

Side profile illustration of a lawn mower with grass and a small circular icon (no text or symbols)

1

Side view of a black and silver lawn mower with visible wheels and open hood (no text or symbols)

2

Side view of a black and silver lawn mower with visible wheels and open hood (no text or symbols)

DE	Mähen - Auswerfen	SL	kosite - izmet
EN	mow - eject	HR	kositi - izbaciti
FR	tondre - éjecter	BG	кося - изхвърлям
IT	falciare - espellere	RO	cosi - evacua
NL	maaien - uitwerpen
CZ	sekat - vyhnat
SK	kosit' - vyhnat'
HU	szénaboglya - kiadása

STOP

Illustration of a lawn mower with a blade and grassy field (no text or symbols)

Side view of a lawn mower with visible tire, blade, and open hood (no text or symbols)

2 1 3 2

DE Betrieb

SL Delovanje

EN Operation

HR Rad

FR Fonctionnement

BG Работа

IT Esercizio

RO Functionare

NL Gebruik

CZ Provoz

SK Prevádzka

HU Üzemeltetés

START

1 2 2 1 CLICK

3

Diagram of a black cable with two labeled arrows pointing to specific parts, likely indicating motion or flow directions.

STOP 1 2 1 2

5	DE	Reinigung / Wartung	SL	Čiščenje / Vzdrževanje
	EN	Cleaning / Maintenance	HR	Čiščenje / Održavanje
	FR	Nettoyage / Entretien	BG	Чистене / Поддръжка
	IT	Pulizia / Manutenzione	RO	Curățare / Întreținere
	NL	Schoonmaken / Onderhoud
	CZ	Čištění / Údržba
	SK	Čistenie / Údrzba
	HU	Tisztítás / Karbantartás

STOP

1

2 3

4 +40°C +10°C - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Technische Daten

WARNING: The vibration emission level will vary because of the ways in which a power tool can be used and may increase above the level given in this information sheet.

The vibration emission level may be used to compare one tool with another.

It may be used for a preliminary assessment of exposure.

An accurate estimate of the vibratory load should also take into account the times when the tool is shut down or when it is running but not actually in use. This may significantly reduce the vibratory load over the total working period.

Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep the hands warm, organisation of work patterns.

Read and understand the operating instructions before using the appliance. Familiarise with the

control elements and how to use the appliance properly. Abide by all the safety measures stated in the service manual. Act responsibly toward third parties.

The operator is responsible for accidents or risks to third parties.

In case of any doubts about connection and operation refer please to our customer center

Persons over 16 years of age can only work on the appliance. An exception includes youngsters trained in order to reach knowledge under supervision of the trainer during occupational education.

This appliance is not intended for use by children.

The machine may not be used by persons with reduced physical, sensory or mental capabilities or persons with a

lack of knowledge or experience unless they are supervised by a person responsible.

Children must be supervised in order not to play with the machine.

Specified Conditions Of Use

The cordless lawn mower has been designed to cut small to medium-sized grass areas in private gardens by the house or in hobby gardens. Due to the physical danger to the user and other persons, the lawn mower may not be used for other purposes.

Do not use this product in any other way as stated for normal use. Not observing general regulations in force and instructions from this manual does not make the manufacturer liable for damages.

The mower must not be used for cutting bushes, hedges and thickets, for cutting and mulching creepers or lawns on roofs or in balcony boxes. The mower must also not be used as a crusher for mulching tree cuttings and hedges or levelling any terrain roughness.

Residual risks

Even when the device is used properly and all safety regulations are complied with, there still may be some residual risks.

⚠️ Rotating blades may lead to serious injuries by cutting or amputating parts of the body.

Never touch under the housing body when the engine is running. Wear gloves! Never remove the collection bag when the machine is being operated.

⚠️ Thrown-off stones or soil may lead to injuries.

Before mowing, check the area to be mowed for any undesirable objects. Make sure the collection bag is properly suspended. Wear safety goggles when working.

⚠️ Poor lighting/light conditions represent a high safety risk.

Provide adequate lighting or good lighting conditions when working with the machine.

⚠ Hearing damage

A longer stay in the immediate vicinity of the running unit may cause hearing damage. Wear ear protectors!

⚠ Damage to health arising from vibrations to hand and arms if the device is used for a long time or if the device is not guided and evaluated properly.

Emergency procedure

Conduct a first-aid procedure adequate to the injury and summon qualified medical attendance as quickly as possible. Protect the injured person from further harm and calm them down. If you seek help, state the following pieces of information: 1. Accident site, 2. Accident type, 3. Number of injured persons, 4. Injury type(s)

Symbols

Warning/caution!

Read the operating instructions to reduce the risk of injury.

Wear eye protective goggles! Wear ear protectors!

Wear gloves!

Wear safety cut through resistant shoes with safety sole and steel toe!

Slow

Warning against thrown-off items

Warning against sharp knives. Knives keep running for a short time after the appliance is switched off.

Keep bystanders in safe distance from the appliance (at least 5 m)

Switch off the engine before any work on it.

Always keep children and unauthorised persons out of reach of the appliance.

Protect against humidity Never expose tool to rain.

Switch the appliance off and remove the contact key before any adjustment, cleaning and servicing work.

Caution, risk of drawing-in

Protection class III

CE marking

Any damaged or disposed electric or electronic devices must be delivered to appropriate collection centres.

Guaranteed sound power level L_WA

Battery

	For an optimum life-time, the battery packs have to be fully charged, after used.
	Battery to be used at the ambient temperatures between 10°C and +40°C only.
	Protect the battery against heat and fi re.
	Protect the battery against water and moisture.
	Protect the battery against temperatures above 40°C.
	Direct Current
	Any damaged or disposed electric or electronic devices must be delivered to appropriate collection centres.
	Do not throw the batteries in household waste.
	Deliver the batteries to a collection centre of old batteries where they will be recycled in an environmentally friendly way.

General Power Tool Safety Warnings

WARNING

Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fi re and/or serious injury. Save all warnings and instructions for future reference.

The term „power tool“ in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.

1) Work area safety

a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.
a) Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any

2) Electrical safety

adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.

b) Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.
e) When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
f) If operating a power tool in a damp location is unavoidable, use a residual current device (RCprotected supply. Use of an RCD reduces the risk of electric shock.
a) Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.
b) Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure the switch is in the off -position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents.
d) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.
e) Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
g) If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards.
a) Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.

3) Personal safety

4) Power tool use and care

b) Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
c) Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
d) Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
e) Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool's operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.
5) Battery tool use and care
a) Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
b) Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.
c) When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.
d) Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.
6) Service
a) Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.

Safety instructions for Cordless lawn mower

Danger of injury!

Never put your hands and feet near the rotating parts. Keep a distance from the ejection opening at all times.

When working with this machine, do not use spare parts other than those recommended by us. Using spare parts not recommend by us can result in serious injuries to persons or damage to the machine.

Keep children and other persons including animals in a safe distance when using the appliance. Minimum safe distance is 5 m.

Wear personal protective equipment. Wear solid shoes and long trousers. Never use the appliance when barefooted or in light sandals. Wear protective gloves if necessary.

Check carefully the terrain where the appliance is being used and remove any items that could get caught and be thrown away.

Avoid operating the equipment in wet grass, where feasible;

All protection covers and safety devices must be correctly attached to operate the device.

Never remove the collection bag when the machine is being operated.

Before using, always visually inspect to see that the blades, blade bolts and cutter assembly are not blunt, worn or damaged. Replace worn or damaged blades and bolts in sets to preserve balance;
The protective equipment on the appliance is strictly prohibited to be disassembled, changed, used in conflict with the designation and it is prohibited to attach any protective equipment of other manufacturers.
The appliance must not be used if damaged or safety equipment is defective. Replace any worn-out and damaged parts.

Do not start the engine before your feet are in a safe distance from the cutting tools.

Do not incline the appliance when being started.

Do not start the appliance when you are standing in front of the ejection opening.

Do not race when working with the appliance. Walk slowly and cautiously.

Be careful when going backwards – risk of tripping!

Make sure your posture is safe, especially on slopes. Do not cut on too steep slopes. Be particularly careful when changing travelling direction on slopes.

On slopes always go straight to the slope and not up and down.

Pay maximum attention when turning around and pulling the appliance to you.

Switch the mower off whenever carrying or inclining it or when being outside a grass area. Wait until all rotating parts have stopped.

If an undesirable item is encountered or the appliance starts vibrating, the appliance must be switched off and the socket plug removed. Check whether the appliance is not damaged. Repair any damage.

Switch the appliance immediately off after finishing your work.

• Stop the machine and take out the contact key. Wait until all rotating parts have stopped and the unit has cooled down. Take out the key.whenever you leave the lawnmower.
  • To release a blocked blade.
  • To adjust the mowing height.
  • To empty the collection bag.
• Check the machine if working perfectly after catching an undesirable object. Repairs must be executed before putting the machine into operation again..
  • To lift the machine or take it away..
  • To flip the mower over or carry it (e.g. from lawn to lawn or across a road).
• Clean the mower or do any other works before checking the mower.

The ON/OFF switch and safety switch must not be locked.

Use only those batteries for the power tool that have been designed to be used for that tool. Use of other batteries may lead to injuries and a risk of fire..

Do not use the device near flammable liquids or gases. Risk of fire and explosion in case of short circuit.

Battery

Risk of fire! Risk of explosion!

Never use damaged, defective or deformed accumulators. Never open or damage the accumulator or let it fall on the ground.

Protect the battery against heat and fire. Battery to be used at the ambient temperatures between 10°C and +40°C only. Never put the battery on heaters and do not expose it to strong sunlight for a long time. After being subject to heavy load, let the battery cool down first.

Short circuit - do not bridge the accumulator contacts with metal parts.

The accumulator must be packaged (plastic bag, box) or accumulator contacts must be sealed up for accumulator disposal, transport or storage.

The Güde charger to be used only to charge the battery. There can be malfunction or fire if different chargers are used.

Vapours may leak out in case of unauthorised use or when using a damaged accumulator. Bring fresh air and seek medical advice if experiencing difficulties. Vapours may irritate the respiratory system.

Work instructions

Accumulators are supplied partially charged and must therefore be fully charged before being used for the first time.

• Charge the accumulator when the appliance is running slowly or stops.
• A li-ion battery may be charged at any time without any shortening of its life. Charging process interruption will not damage the accumulator.
• A li-ion battery is protected by the Electronic Cell Protection against deep discharge.
• A significantly shorter operating time of a charged battery means the battery life is over and the battery must be replaced.

Maintenance

Rotating blade

Any works / adjusting on the machine to be only performed with the engine switched off, contact key taken out and when the mowing blade is not moving.

Switch the appliance off and remove the contact key before any adjustment, cleaning and servicing work. Wait until all rotating parts have stopped and the appliance cooled down. After each use, clean carefully the cutter bar. Wipe it with a cloth moistened in oil or apply metal treatment spray on it.

Keep the machine clean. Regularly clean the grass ejection chute and machine body. Keep the device, in particular the air vents, clean at all times. Never spray water on the device body! Do not clean the plastics with solvents, flammable or toxic fluids. For cleaning, use a damp cloth only.

Apply environment-friendly oil to all moving parts.

Check the collection bag at regular intervals for any wear and aging.

Repairs and works specified in these Instructions may only be performed by qualified authorised staff.

Use only original accessories and original spare parts.

Only a regularly maintained and treated appliance can serve as a satisfactory aid. Insufficient maintenance and care can lead to unforeseen accidents and injuries.

If necessary, a list of spare parts can be found at www.guede.com.

Machine to be stored in a dry place.

Disposal

The disposal instructions are based on the icons placed on the appliance or its package.

Any damaged or disposed devices must be delivered to appropriate collection centres.

Dispose of the batteries in an environmentally friendly manner.

Li-ion batteries are subject to the special disposal obligation. Have any defective batteries disposed of by a specialised shop. The battery must be taken out before the appliance is scrapped. Damaged batteries may harm the environment and your health if toxic vapours or liquids leak out of such batteries.

Therefore, never send a defective battery by post, etc. Please contact your local recycling centre.

Dispose of the batteries when discharged. We recommend applying an adhesive tape on the poles to protect them against short circuit. Never open the battery.

Guarantee

Warranty period of 12 months applies to commercial use and 24 months applies to private use and commences on the day of purchase of the device.

The guarantee solely covers inadequacies caused by material defect or manufacturing defect. Original payment voucher with the sales date needs to be submitted for any claim in the guarantee period.

The guarantee does not cover any unauthorised use such as appliance overloading, use of violence, damage as a result of any unauthorised interference or caused by foreign items. Failing to follow the operating and assembly instructions and common wear are also not included in the guarantee.

Important information for the customer

Please be sure to know that returning the product in or after the warranty period must be made in the original packaging.

Service

Do you have any technical questions? Any claim? Do you need any spare parts or operating instructions? We will quickly help you and without needles bureaucracy at our web pages at www.guede.com in the Servicing part. Please help us be able to help you. In order to identify your device in case of claim we need the serial No., product No. and year of production. All this data can be found on the type label.

Tel.: [phone] / 700-360

Fax: [phone]

E-Mail: [e-mail]

Failure removal

Defect	Cause	Removal
The motor does not start	Battery is empty Charge the battery
	Battery is defective Have it replaced in a Güde authorised service centre
	Contact key is not inserted	See „Operation" below → 15
	Main switch or safety arch is not controlled	See „Operation" below → 15
Unsteady running, strong vibrations	Blade is damaged Replace the blade
	Blade is loose Check and tighten the blade clamping
Poor mowing/catching performance	Blade is blunt Have the blade sharpened or replaced
	Collection bag is blocked	Empty the collection bag → 12
	Mowing height adjustment not regulated	Adjust the mowing height → 5
Grass is not collected	Blocked channel	Clean the ejection channel
	Full collection bag	Empty the collection bag → 12
	Too wet grass	Cut in dry weather

Translation of the EC-Declaration of Conformity

We, hereby declare the conception and construction of the below mentioned appliances correspond - at the type of construction being launched - to appropriate basic safety and hygienic requirements of EC Directives.

In case of any change to the appliance not discussed with us the Declaration expires.

Annex IV Notified Body Name: Adress:No:

Type Ex. Cert.-No.:

97/68/EC_Emission No.:

2000/14/EC_2005/88/EC