HOCT3L517EW2 - Fridge HOOVER - Free user manual and instructions

Brand	Hoover
Model	HOCT3L517EW2
Product Type	Refrigerator with freezer compartment
Climate Class	SN (10°C to 32°C), N (16°C to 32°C), ST (16°C to 38°C), T (16°C to 43°C)
Power Supply	220-240 V ~ 50 Hz
Refrigerant	R600a (flammable)
Insulating Gas	Cyclopentane
Interior Lighting	LED (energy class G), replaceable by a professional
Door Reversibility	Yes, detailed instructions provided
Super Cooling Function	Yes, maintains 2°C for 24h then automatically returns
Refrigerator Temperature Ranges	2°C, 3°C, 4°C, 6°C, 8°C + Super Cooling mode
Compartments	Refrigerator: glass shelves, vegetable drawer, door balconies; Freezer: drawer
Adjustable Feet	Yes, at the front
Cleaning and Maintenance	Manual defrosting recommended; do not use sharp objects or electrical appliances for defrosting
Memory in case of power failure	Yes, retains settings
Child Safety	Use under adult supervision; children aged 8 and over allowed
Included Accessories	Glass shelf, vegetable drawer, freezer drawer, door balconies, adjustable feet

Frequently Asked Questions - HOCT3L517EW2 HOOVER

How to set the refrigerator temperature?

Press the right button (sensor) to cycle through the temperatures: Super Cooling, 2°C, 3°C, 4°C, 6°C, 8°C. The temperature blinks then locks after 5 seconds to confirm the setting.

What to do in case of a power outage?

The appliance retains settings in memory. Avoid opening the door to maintain cold. If the outage lasts less than the temperature rise time indicated on the label, frozen food remains safe.

How to reverse the door opening direction?

Unplug the appliance. Remove the upper hinge, the door, the middle and lower hinges. Move the stoppers and hole covers to the opposite side. Reinstall in reverse order starting with the lower hinge.

How to clean the inside of the refrigerator?

Unplug the appliance. Use a soft cloth with warm water and mild detergent. Do not clean cold glass shelves with hot water. Dry thoroughly before reconnecting.

How to defrost the freezer?

Unplug the appliance and leave the door open. Never use sharp objects or electrical appliances to speed up defrosting. Remove water with a cloth. Reconnect after complete drying.

What to do if the refrigerator is not cooling enough?

Check that the ambient temperature matches the climate class (SN, N, ST, T). Ensure ventilation openings are not blocked. Set a colder temperature (2°C or Super Cooling). If problem persists, contact technical support.

The interior light no longer works, how to replace it?

Unplug the appliance. Remove the lamp cover using a screwdriver. Replace the bulb (12V/5W) and put back the cover. If not comfortable, call a professional.

Which foods should not be stored in the refrigerator?

Bananas, onions, potatoes, and garlic should not be stored in the refrigerator. Store fruits and vegetables in the designated drawer.

Why is the door hard to open just after closing?

This is normal: a pressure difference has been created inside. Wait a few minutes for the pressure to equalize, then the door will open normally.

How to contact after-sales service?

Go to the website https://corporate.haier-europe.com/en/, select your brand and country to get the phone number and contact form.

USER MANUAL HOCT3L517EW2 HOOVER

Two stacked rectangular blocks with no text or symbols

BG....3

CZ 17

DA 30

DE 42

EL....56

ES 71

FI....85

FR 98

HR....112

HU 125

IT....139

NL 153

NO....166

PL....178

PT 192

RO....205

RU 218

SK 234

SL....247

SR 260

SV 273

UK 285

EN 300

ET 316

LT 332

LV....348

graph TD
    A["Robot Icon"] --> B["LED"]
    B --> C["Square Box"]
    style A fill:#f9f,stroke:#333
    style C fill:#bbf,stroke:#333

Technical diagram of a refrigerator with numbered parts for identification

Diagram of a boat hull with directional arrows indicating movement or force (no text or symbols)

Simple line drawing of a curved panel with directional arrows indicating movement or force (no text or symbols)

Diagram showing a folding panel with tools and a separate blank sheet, no text or symbols present

Diagram showing a curved panel with two small vehicles and a moving device with directional arrows, no text or symbols present.

Diagram showing a window with tools and a separate panel, no text or symbols present

Diagram showing two views of a window frame with directional arrows indicating movement (no text or symbols)

Simple line drawing of a cabinet with arrows indicating force or movement (no text or symbols)

Technical diagram of a refrigerator with numbered parts for identification

Diagram of a boat's side view showing top, bottom, and side views with directional arrows indicating flow or movement (no text or symbols)

Line drawing of a cabinet with an open door and a tool, showing motion arrows (no text or symbols)

Pure technical line drawing of a mechanical component with no text or symbols

Diagram of a container with liquid and a dropper, showing fluid flow direction (no text or symbols)

Diagram showing a curved panel with directional arrows and a mechanical component with rotational arrow (no text or symbols)

Diagram showing two views of a window frame with arrows indicating direction (no text or symbols)

Diagram showing a folding panel with a handle, a switch, and a separate flat panel (no text or symbols present)

Simple line drawing of a window with a tool and a magnifying glass, next to a blank panel (no text or symbols)

Simple line drawing of a cabinet with arrows indicating movement or force, no text or symbols present

Brugervejledning

TRF-37LE

SIKKERHEDSOP- LYSNINGER

graph LR
    A["LED"] --> B["Robot Icon"]
    B --> C["LED"]

Technical diagram of a refrigerator with numbered parts for identification

Diagram of a boat with directional arrows indicating flow or movement (no text or symbols)

Line drawing of a cabinet with an open door and a tool, showing motion arrows (no text or symbols)

Pure technical diagram of a mechanical assembly without any text, numbers, or symbols

Simple line drawing of a container with liquid and a tool, no text or symbols present

Diagram showing a curved panel with directional arrows and a mechanical component with rotational arrow (no text or symbols)

Two technical diagrams showing a structural component before and after deformation, with arrows indicating force direction (no text or symbols)

Diagram showing a folding panel with tools and a separate blank sheet, no text or symbols present

Simple line drawing of a window with a tool and directional arrows, next to a blank rectangular panel (no text or symbols)

Simple line drawing of a cabinet with an open lid and arrows indicating motion (no text or symbols)

Technical diagram of a refrigerator with numbered parts for identification

Diagram of a boat's side view showing top, bottom, and side views with arrows indicating motion (no text or symbols)

Line drawing of a cabinet with arrows indicating movement or force, no text or symbols present

Diagram showing a curved structure with force vectors labeled 'F' and 'B', indicating applied forces on the bottom surface.

Diagram showing a curved panel with directional arrows and a mechanical component with rotational motion (no text or symbols)

Two technical diagrams showing structural changes: one with upward arrows indicating compression, the other with a wavy panel and arrow indicating force (no text or symbols)

Technical line drawing showing a door frame with tools and a separate panel, no text or symbols present

Simple line drawing of a window with a tool and directional arrows, next to a blank rectangular panel (no text or symbols)

Simple line drawing of a box with a triangular object on top and arrows indicating motion (no text or symbols)

Technical diagram of a refrigerator with numbered parts for identification

Diagram of a boat hull with directional arrows indicating movement or flow (no text or symbols)

Simple line drawing of a cabinet with an open door and a tool, no text or symbols present

Pure diagram of a mechanical or electrical component with no text, numbers, or symbols

Pure diagram of a curved structure with directional arrows and small symbols, no text or labels present

Diagram showing a curved panel with directional arrows and a mechanical component with rotational motion (no text or symbols)

Two technical diagrams showing structural changes under force, with arrows indicating direction (no text or symbols)

Line drawing of a cabinet interior with tools and components, no text or symbols present

Simple line drawing of a window with tools and a door, no text or symbols present

Simple line drawing of a box with a lid and an arrow pointing to it, no text or symbols present.

Technical diagram of a refrigerator with numbered parts for identification

User control panel with battery, switch, and numeric keypad buttons

Diagram of a boat hull with directional arrows indicating movement or force (no text or symbols)

Line drawing of a cabinet with tools and a handle, no text or symbols present

Pure technical line drawing of a mechanical assembly without any text, numbers, or symbols

Diagram of a container with liquid and arrows indicating flow or movement (no text or symbols)

Diagram showing a curved panel with directional arrows and a mechanical component with rotational motion (no text or symbols)

Diagram showing two views of a window frame with directional arrows indicating movement (no text or symbols)

Diagram showing a folding panel with a ruler and screwdriver, alongside a blank rectangular panel (no text or symbols)

Simple line drawing of a window with tools and a door, next to a blank panel (no text or symbols)

Simple line drawing of a rectangular box with a triangular top and internal arrows indicating motion or force (no text or symbols)

Käyttöopas

TRF-37LE

TURVALLISUUS-OHJEET

Technical diagram of a refrigerator with numbered parts for identification

Diagram of a boat with an upward arrow and curved arrows indicating motion or flow (no text or symbols)

Line drawing of a cabinet with a handle and a tool, showing motion arrows (no text or symbols)

Pure technical line drawing of a mechanical component with no text or symbols

Diagram of a container with liquid and a dropper, showing fluid flow direction (no text or labels)

Diagram showing a curved panel with directional arrows and a mechanical component with rotational arrow (no text or symbols)

Simple line drawing of a window with a tool and screwdriver, next to a blank panel (no text or symbols)

Two technical diagrams showing structural changes under compression, with arrows indicating force direction (no text or symbols)

Simple line drawing of a cabinet with arrows indicating force or movement (no text or symbols)

Technical line drawing showing a door frame with tools and a separate panel, no text or symbols present

Technical diagram of a refrigerator with numbered parts for identification

Diagram of a boat with directional arrows indicating flow or movement (no text or symbols)

Simple line drawing of a cabinet with an attached shelf and directional arrows indicating motion (no text or symbols)

Pure technical line drawing of a mechanical component or assembly without any text, numbers, or symbols

Simple line drawing of a container with liquid and a tool, no text or symbols present

Diagram showing a curved panel with directional arrows and a mechanical component with rotational arrow (no text or symbols)

Diagram showing two views of a folded panel with arrows indicating force or movement (no text or symbols)

Diagram showing a folding panel with a ruler and screwdriver, alongside a blank rectangular panel (no text or symbols)

Simple line drawing of a window with a tool and a ruler inside, next to a blank panel (no text or symbols)

Line drawing of a cabinet with arrows indicating movement or force, no text or symbols present

Korisnički priručnik TRF-37LE

SIGURNOSNE INFORMACIJE

graph TD
    A["LED"] --> B["Worker Icon"]
    B --> C["LED"]
    style A fill:#f9f,stroke:#333
    style C fill:#bbf,stroke:#333

Technical diagram of a refrigerator with numbered parts for identification

Diagram of a boat with an upward arrow and curved arrows indicating motion or flow (no text or symbols)

Upute za zamjene žarulje su:

Line drawing of a mechanical assembly with arrows indicating motion (no text or symbols)

Pure technical diagram of a mechanical assembly with no text, numbers, or symbols

1. Uklonite vijke koji pričvršćuju donju šarku na desnoj strani ormarića, zatim šarku i podesive nožice.

Simple line drawing of a container with liquid and a tool, no text or symbols present

Diagram showing a curved panel with directional arrows and a mechanical component with rotational arrow (no text or symbols)

Simple line drawing of a window with a tool and screwdriver, next to a blank panel (no text or symbols)

Two technical diagrams showing structural changes: one with downward arrows indicating compression, the other with a wavy panel and a grid of blocks (no text or symbols)

Simple line drawing of a box with a tool and arrows indicating movement or force (no text or symbols)

Line drawing of a cabinet interior with tools and components, no text or symbols present

Technical diagram of a refrigerator with numbered parts for identification

Diagram of a boat hull with directional arrows indicating movement or force (no text or symbols)

Pure technical line drawing of a mechanical component or assembly without any text, numbers, or symbols

Diagram of a container with liquid and arrows indicating flow or movement (no text or symbols)

Diagram showing a curved panel with directional arrows and a mechanical component with rotational motion (no text or symbols)

Simple line drawing of a window with a tool and a ruler inside, next to a blank rectangular panel (no text or symbols)

Two technical diagrams showing a structural component before and after assembly, with arrows indicating force direction (no text or symbols)

Simple line drawing of a cabinet with arrows indicating motion or force, no text or symbols present

Diagram showing a folding panel with tools and a separate rectangular panel, no text or symbols present

Technical diagram of a refrigerator with numbered parts for identification

Diagram of a boat hull with directional arrows indicating movement or force (no text or symbols)

Simple line drawing of a garment collar with a handle and two small items below (no text or symbols)

Diagram showing a curved panel with directional arrows and a mechanical component with rotational arrow (no text or symbols)

Two technical diagrams showing structural changes under force, with no visible text or symbols.

Diagram showing a folding panel with a switch and two parts, alongside a separate rectangular panel (no text or symbols)

Simple line drawing of a window with a tool and a ruler inside, next to a blank rectangular panel (no text or symbols)

Simple line drawing of a rectangular box with a tool and arrows indicating motion (no text or symbols)

Technical diagram of a refrigerator with numbered parts for identification

Diagram of a boat with directional arrows indicating flow or movement (no text or symbols)

Diagram showing a curved panel with directional arrows and a mechanical component with rotational motion (no text or symbols)

Two technical diagrams showing structural changes under compression, with arrows indicating force direction (no text or symbols)

Technical line drawing showing a door frame with tools and a separate panel, no text or symbols present

Diagram showing a tool interacting with a window and a blank panel, no text or symbols present

Simple line drawing of a box with a handle and arrows indicating movement or force (no text or symbols)

Brukerhåndbok

TRF-37LE

SIKKERHETS- INFORMASJON

Technical diagram of a refrigerator with numbered parts for identification

TRF-37LEA
Nr	Beskrivelse
1	Elektronisk kontrolltavle
2	Glasshylle
3	Krisperdeksel
4	Krisper
5	Fryseskuff
6	Justerbare føtter
7	Dørbalkong

Diagram of a boat hull with directional arrows indicating movement or force (no text or symbols)

Bruksanvisningen for skifte av lampe er som fölger:

Skift ut lysene (lampeparameter: 12 V / 5 W)

Line drawing of a cabinet with an open door and a tool, showing motion arrows (no text or symbols)

Pure technical line drawing of a mechanical assembly without any text, numbers, or symbols

Diagram of a container with liquid and a dropper, showing fluid flow direction (no text or symbols)

Diagram showing a curved panel with directional arrows and a mechanical component with rotational arrow (no text or symbols)

1. Monter midthengshengselet på venstre side, og installer deretter kjøledøren samtidig.

Simple line drawing of a window with a tool and screwdriver, next to a blank panel (no text or symbols)

Diagram showing two views of a folded panel or cabinet with directional arrows indicating force or movement (no text or symbols present)

Simple line drawing of a box with a tool and arrows indicating movement or force (no text or symbols)

Technical line drawing of a cabinet with tools and components, no text or symbols present

Technical diagram of a refrigerator with numbered parts for identification

Diagram of a boat with an upward arrow and curved arrows indicating motion or flow (no text or symbols)

Simple line drawing of a cabinet with an open door and a tool, no text or symbols present

Pure technical line drawing of a mechanical component with no text or symbols

Diagram of a curved structure with directional arrows indicating force or movement (no text or symbols)

Technical line drawing of a cabinet with components and an arrow indicating assembly (no text or symbols)

Diagram showing a curved panel with two small car icons and a mechanical component with rotational arrows (no text or symbols)

Simple line drawing of a window with a tool and arrow, next to a blank rectangular panel (no text or symbols)

Two technical line drawings showing structural changes: one with downward arrows indicating compression, the other with a wavy panel and a small inset detail (no text or symbols)

Simple line drawing of a box with a tool and arrows indicating movement or force (no text or symbols)

Manual do utilizador TRF-37LE

INFORMAÇÕES DE SEGURANÇA

graph TD
    A["LED"] --> B["Robot Icon"]
    B --> C["LED"]
    C --> A

Technical diagram of a refrigerator with numbered parts for identification

Diagram of a boat with an upward arrow and curved arrows indicating motion or flow (no text or symbols)

Simple line drawing of a cabinet with an open door and a tool, no text or symbols present

Pure technical line drawing of a mechanical assembly or component without any text, numbers, or symbols

Simple line drawing of a curved panel or duct with two downward arrows indicating force or movement (no text or symbols)

Diagram showing a curved panel with directional arrows and a mechanical component with rotational arrow (no text or symbols)

Two technical diagrams showing structural changes under compression, with arrows indicating force direction (no text or symbols)

Diagram showing a folding panel with a tool and mechanical components, next to a blank sheet (no text or symbols)

Simple line drawing of a window with a tool and a ruler inside, next to a blank rectangular panel (no text or symbols)

Simple line drawing of a box with a triangular object on top and arrows indicating force or movement (no text or symbols)

Technical diagram of a refrigerator with numbered parts for identification

Diagram of a boat's side view showing top, bottom, and side views with directional arrows indicating flow or movement (no text or symbols)

Pure technical line drawing of a mechanical component or housing with no text, numbers, or symbols

Simple line drawing of a container with liquid and a screw, no text or symbols present

Diagram showing a curved panel with directional arrows and a mechanical component with rotational motion (no text or symbols)

Simple line drawing of a window with a tool and directional arrows, next to a blank rectangular panel (no text or symbols)

Diagram showing two views of a folded panel with arrows indicating force or movement (no text or symbols)

Simple line drawing of a box with a tool and arrows indicating movement or force (no text or symbols)

Diagram showing a folding panel with tools and components, no text or symbols present

Technical diagram of a refrigerator with numbered parts for identification

Diagram of a boat hull with an upward arrow indicating motion, and curved arrows indicating rotation (no text or symbols)

Line drawing of a cabinet with a lid and a tool, showing mechanical components and directional arrows (no text or symbols)

Pure technical diagram of a mechanical assembly with no text, numbers, or symbols

Simple line drawing of a curved structure with arrows indicating force or movement (no text or symbols)

Diagram showing a curved panel with directional arrows and a mechanical component with rotational motion (no text or symbols)

Diagram showing two views of a folded panel with directional arrows indicating movement (no text or symbols)

Technical line drawing of a door frame with a slide and screwdriver, showing assembly steps (no text or symbols)

Simple line drawing of a window with a tool and a ruler inside, next to a blank rectangular panel (no text or symbols)

Simple line drawing of a cabinet with arrows indicating movement or force, no text or symbols present

Technical diagram of a refrigerator with numbered parts for identification

PRE spotrebiče bez oddelenia označeného 4 hviezdičkami: tento chladiaci spotrebič nie je vhodný na zmrazovanie potravín

Diagram of a boat hull with an upward arrow indicating motion, and directional arrows showing rotation (no text or symbols)

Simple line drawing of a cabinet with an open door and a tool, no text or symbols present

Pure technical diagram of a mechanical assembly with no text, numbers, or symbols

Diagram of a container with liquid and a tool, showing flow direction (no text or symbols)

Diagram showing a curved panel with directional arrows and a mechanical component with rotational arrow (no text or symbols)

Simple line drawing of a window with a tool and screwdriver, next to a blank rectangular panel (no text or symbols)

Two technical diagrams showing structural changes under compression, with arrows indicating force direction (no text or symbols)

Simple line drawing of a cabinet with arrows indicating force or movement (no text or symbols)

Technical line drawing of a cabinet with components and an open door, showing assembly steps (no text or symbols)

Navodila za uporabo TRF-37LE

VARNOSTNE INFORMACIJE

graph TD
    A["Person Icon"] --> B["LED"]
    B --> C["LED"]
    C --> A

Technical diagram of a refrigerator with numbered parts for identification

Diagram of a boat hull with an upward arrow indicating motion, and a curved arrow below showing rotational direction (no text or symbols)

Simple line drawing of a cabinet with an open door and a tool, no text or symbols present

1. Odstranite dva vijaka, ki pritrjujeta sredinski tečaj.

Pure technical line drawing of a mechanical component with no text or symbols

1. Odstranite vijake, ki pritrjujejo spodnji tečaj na desno stran omare, nato odstranite tečaj in nastavljive noge.

Diagram of a container with liquid and a tool, showing no text or symbols

1. Odstranite desno zaporo vrat na spodnjem delu vrat hladilnika in zamrzovalnika, nato pa iz vrečke z dodatki vzemite levo zaporo vrat, jo namestite na levo spodnjo stran vrat hladilnika in zamrzovalnika. Odstranite zatič in ga namestite na drugo stran.

Diagram showing a curved panel with directional arrows and a mechanical component with rotational arrow (no text or symbols)

1. Namestite sredinski tečaj na levo stran in nato istočasno namestite vrata hladilnika.

Simple line drawing showing a window with a tool and a magnifying glass, next to a blank rectangular panel (no text or symbols)

1. Odstranite pokrov levega tečaja na desno stran, nato namestite zgornji tečaj in pokrov tečaja na levo stran omare.

2. Odstranite pokrov odprtine desnega tečaja zamrzovalnika in ga namestite na drugo stran. Odstranite prekrivni čep luknje sredinskega tečaja na levi strani in ga nato namestite na desno stran,

Two technical diagrams showing structural changes under force, with arrows indicating direction (no text or symbols)

Simple line drawing of a box with a tool and arrows indicating movement or force (no text or symbols)

Technical line drawing of a cabinet with components and assembly (no text or symbols)

Korisničko uputstvo TRF-37LE

BEZBEDNOSNE INFORMACIJE

Pažljivo pročitajte uputstva za upotrebu i ugradnju!

Technical diagram of a refrigerator with numbered parts for identification

ZA uređaje bez pregrade sa 4 zvezdice: ovaj frižider nije pogodan za zamrzavanje namirnica

ZA samostojeće uređaje: ovaj frižider ne može da se koristi kao ugradni uređaj

Diagram of a boat with an upward arrow and curved arrows indicating motion (no text or symbols)

Line drawing of a cabinet with an open door and a tool, showing motion arrows (no text or symbols)

1. Uklonite dva zavrtnja koja pričvršćuju centralnu šarku.

Pure diagram of a mechanical or electrical component with no text, numbers, or symbols

1. Uklonite zavrtnje koji pričvršćuju donju šarku za desnu stranu frižidera, zatim i šarku i podesive stopice.

Diagram of a container with liquid and a tool, showing no text or symbols

1. Uklonite desni graničnik za vrata pri dnu frižidera i vrata zamrzivača, a zatim iz torbe za pribor izvadite levi graničnik za vrata, montirajte ga na donju levu stranu vrata frižidera i vrata zamrzivača. Uklonite osigurač i montirajte ga na drugu stranu.

Diagram showing a curved panel with directional arrows and a mechanical component with rotational motion (no text or symbols)

1. Montirajte centralnu šarku na levu stranu, pa zatim istovremeno montirajte vrata frižidera.

Simple line drawing of a window with a tool and a ruler inside, next to a blank rectangular panel (no text or symbols)

1. Uklonite poklopac otvora za desnu šarku zamrzivača, pa ga postavite na levu stranu. Uklonite čep za otvor zavrtnja centralne šarke s leve strane, a zatim ga montirajte na desnu stranu.

Diagram showing two views of a window frame with directional arrows indicating movement (no text or symbols)

1. Uklonite poklopac otvora leve šarke sa desne strane, a zatim montirajte gornju šarku i poklopac šarke na levu stranu frižidera.

Simple line drawing of a box with a tool and arrows indicating motion (no text or symbols)

1. Montirajte donju šarku na levu stranu frižidera, montirajte dve podesive stopice u trenutnom položaju, a zatim montirajte vrata zamrzivača.

Diagram showing a door frame with tools and a separate panel, no text or symbols present

Technical diagram of a refrigerator with numbered parts for identification

Diagram of a boat with an upward arrow and curved arrows indicating motion or flow (no text or symbols)

Simple line drawing of a cabinet with an open door and a tool, no text or symbols present

Pure technical line drawing of a mechanical component with no text or symbols

Diagram of a container with liquid and a tool, showing fluid flow and support points (no text or labels)

Diagram showing a curved panel with directional arrows and a mechanical component with rotational arrow (no text or symbols)

Diagram showing two views of a window frame with directional arrows indicating movement (no text or symbols)

Diagram showing a folding panel with tools and a separate blank panel, no text or symbols present

Simple line drawing of a window with tools and a door, no text or symbols present

Simple line drawing of a cabinet with arrows indicating motion or force, no text or symbols present

Technical diagram of a refrigerator with numbered parts for identification

Diagram of a boat hull with directional arrows indicating movement (no text or symbols)

Line drawing of a cabinet with a lid and a tool, showing mechanical components and motion arrows (no text or symbols)

Pure technical line drawing of a mechanical component with no text or symbols

Pure technical line drawing of a mechanical component with no text or symbols

Diagram showing a door frame with tools and a separate panel, no text or symbols present

Diagram showing a curved panel with directional arrows and a mechanical component with rotational arrow (no text or symbols)

Diagram showing a tool interacting with a wall-mounted device next to a blank panel (no text or symbols)

Two technical diagrams showing a structural component before and after deformation, with arrows indicating force direction (no text or symbols)

Simple line drawing of a box with a tool and arrows indicating movement or force (no text or symbols)

USER MANUAL

CITY COMBI

Two stacked rectangular blocks with no text or symbols

SAFETY INFORMATION

Please read the operating and installation instructions carefully! They contain important information on how to install, use and maintain the appliance.

The manufacturer is not liable if you fail to comply with the instructions and warnings.

Retain all documents for subsequent use or for the next owner.

- Do not connect the appliance to the electricity supply until all packing and transit protectors have been removed. Keep children away from packaging and its parts.

• Danger of suffocation from folding cartons and plastic film!

- Leave to stand for at least 4 hours before switching on the product, to allow compressor oil to settle if transported horizontally.

• Make sure there is no transport damage.

- Do not damage the refrigerant circuit.

- Maintain the ventilation openings in the appliance enclosure or in the built-in structure, free of obstruction.

- Never use water to wash the compressor position, wipe it with a dry cloth thoroughly after cleaning to prevent rust.

- Handle the appliance always with at least two persons because it is heavy.

• Install and level the appliance in an area suitable for its size and use.
• Make sure that the electrical information on the rating plate agrees with the power supply. If it does not, contact an electrician.
- The appliance is operated by a 220-240 VAC/50 Hz power supply. Abnormal voltage fluctuation may cause the appliance to fail to start, or damage to the temperature control or compressor, or there may be an abnormal noise when operating. In such case, an automatic regulator shall be mounted.
- Only for UK: The appliance's power cable is fitted with 3-cord

(grounding) plug that fits a standard 3-cord (grounded) socket. Never cut off or dismount the third pin (grounding). After the appliance is installed, the plug should be accessible.

• Make sure that mains cable is not caught under the appliance during and after carrying/moving the appliance, to avoid the mains cable becoming cut or damaged. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified person in order to avoid a hazard.

- Do not install the appliance in humid, oily or dusty places, nor expose it to direct sunlight and to water.

- Do not install the appliance near heaters or inflammable materials.

- FOR appliances with a freezer compartment: if there is a power failure do not open the lid. Frozen food should not be affected if the failure lasts for less than the hours indicated on the rating label (Temperature rise time). If the failure is longer, then the food should be checked and eaten immediately or cooked and then refrozen.

- If you find that the lid of the appliance is difficult to open just after you have closed it, don't worry. This is due to the pressure difference which will equalize and allow the lid to be opened normally after a few minutes.

- Do not store medicines, bacteria or chemical agents in the appliance. This appliance is a household appliance, it is not recommended to store materials that require strict temperatures.

- Do not excessively pull or fold the power cord or touch the plug with wet hands.

- Do not store products which contain flammable propellant (e.g. spray cans) or

explosive substances in the appliance. Risk of explosion!

- Do not place unstable articles (heavy objects, containers filled with water) on top of the refrigerator, to ovoidpersonal injury caused by falling or electric shock caused by contact with water.

- Do not use electrical appliances inside the food storage compartments, unless they are of the type recommended by the manufacturer.

- Do not touch internal cooling elements, especially with wet hands, to avoid cracks or injuries.

- At risk here are children, people who have limited physical, mental or sensory abilities, as well as people who have inadequate knowledge concerning safe operation of the appliance.

- Check that children and vulnerable people have understood the hazards. A person responsible for safety must supervise or

instruct children and vulnerable people who are using the appliance. Only children aged 8 years and above may use the appliance.

• Children should not play with the appliance.
• Children aged from 3 to 8 years are allowed to load and unload this appliance.
• FOR appliances with a freezer compartment: do not store bottled or canned liquids (especially carbonated drinks) in the freezer compartment. Bottles and cans may burst!
- FOR appliances with a freezer compartment: never put frozen food straight from the freezer compartment in your mouth. Risk of low- temperature burns!
- Keep plastic parts and the door seal free of oil and grease. Otherwise,

plastic parts and the door seal will become porous.

• Before performing any operation, unplug the power cord from the power socket.

• Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.

• Do not use pointed or sharp-edged objects such as knives or forks to remove the frost.

• Never use hairdryers, electrical heaters or other such electrical appliances for defrosting.
• It is recommended to keep the plug clean, any excessive dust residues on the plug can be the cause fire.
• Do not try to repair, disassemble or modify the appliance by yourself. In case of repair please contact always our customer service.

• Supervise children while the appliance is being cleaned or maintained.

• Do not clean the cold glass shelves with hot water. Sudden temperature change may cause the glass to break.

• WARNING: The tubes of the refrigeration circuit convey a small quantity of an environmentally friendly but flammable refrigerant (R600a) and insulating gas (cyclopentane). It does not damage the ozone layer and does not increase the greenhouse effect. If refrigerant escapes, it may injure your eyes or ignite.
• If the refrigerant circuit should be damaged:
• Switch off the appliance and pull out the mains plug,

- Keep naked flames and/or ignition sources away from the appliance,

- Thoroughly ventilate the room for several minutes,

- Inform customer service.

- WARNING: Do not damage the plug and/or the power cord; this could cause electrical shocks or fires.

- WARNING: Do not use multiple portable socket-outlets or portable power supplies. We do not recommend the use of extension leads and multi-way adapters.

- Do not attempt to sit or stand on the top of the appliance. You could injure yourself or damage it. This appliance is not designed for stacking with any other ones.

• The product is designed and built for domestic household use only.

- Only original parts supplied by the manufacturer may be used. The manufacturer guarantees that only these parts satisfy the safety requirements.

- Opening the door for long periods can cause a significant increase of the temperature in the compartments of the appliance.

- Clean regularly surfaces that can come in contact with food and accessible drainage systems.

- Clean water tanks if they have not been used for 48h; flush the water system connected to a water supply if water has not been drawn for 5 days.

- Store raw meat and fish in suitable containers in the refrigerator, so that it is not in contact with or drip onto other food.

- Two-star frozen-food compartment (if they are presented in the appliance) are suitable for storing pre-frozen food, storing or making ice-cream and making ice cubes.

- One-, two- and three-star compartments, if present in the appliance, are not suitable for the freezing of fresh food.

- If the appliance is left empty for long periods, switch off, defrost, clean, dry and leave the door open to prevent mould developing within the appliance.

• FOR Wine Coolers: this appliance is intended to be used exclusively for the storage of wine

• FOR a free standing appliance: this refrigerating appliance is not intended to be used as a built-in appliance

• FOR appliances without a 4-star compartment: this refrigerating appliance is not suitable for freezing food stuffs.

• This product contains a light source of energy efficiency class G.

- Replaceable (LED only) light source by a professional.

graph LR
    A["LED"] <--> B["LED"]

Labeled diagram of a refrigerator interior showing numbered compartments and doors

No	Description
1	Electronic control board
2	Glass shelf
3	Crisper Cover
4	Crisper
5	Freezer drawer
6	Adjustable feet
7	Door balcony

FOR appliances without a 4-star compartment: this refrigerating appliance is not suitable for freezing foodstuffs FOR a free standing appliance: this refrigerating appliance is not intended to be used as a built-in appliance FOR Wine Coolers: this appliance is intended to be used exclusively for the storage of wine

POSITIONING

Install the appliance at a location where the ambient temperature corresponds to the climate class indicated on the rating plate of the appliance:

• Extended temperate (SN): 'this refrigerating appliance is intended to be used at ambient temperatures ranging from 10 °C to 32 °C'
• Temperate (N): 'this refrigerating appliance is intended to be used at ambient temperatures ranging from 16 °C to 32 °C'
• Subtropical (ST): 'this refrigerating appliance is intended to be used at ambient temperatures ranging from 16 °C to 38 °C'
• Tropical (T): 'this refrigerating appliance is intended to be used at ambient temperatures ranging from 16 °C to 43 °C'

FOOD STORAGE

Position different food in different compartments according to be below table

Refrigerator compartment	Type of food
Door or balconies of fridge compartment	·Foods with natural preservatives, such as jams, juices, drinks, condiments.·Do not store perishable foods
Crisper drawers (salad drawer)	·Fruits, herbs and vegetables should be placed separately in the crisper bin·Do not store bananas, onions, potatoes, garlic in the refrigerator
Fridge shelf – middle	·Dairy products, eggs
Fridge shelf – top	·Foods that do not need to be cocked, such as ready-to- eat foods, deli meats, leftovers.
Freezer drawer(s)/tray	·Foods for long-term storage·Bottom drawer for raw meet, poultry, fish·Middle drawer for frozen vegetables, chips.·Top tray for ice cream, frozen fruit, frozen baked goods.

- For most food categories, the longest storage time in the fridge compartment is achieved with colder temperatures. Since some particular products (as fresh fruits and vegetables) may be damaged with colder temperatures, it is suggested to keep them in the crisper drawers, whenever present. If not present, maintain an average setting of the thermostat.

- It's suggested to set the temperature at 4°C in the fridge compartment, and, whether possible, at -18°C in the freezer compartment.

- For frozen food, refer to the storage time written on the food packaging. This storage time is achieved whenever the setting respects the reference temperatures of the compartment (one-star -6°C, two stars -12°C, three stars -18°

TECHNICAL ASSISTANCE

To contact the technical assistance, visit our website: https://corporate.haier-europe.com/en/

Under the section "website", choose the brand of your product and your country. You will be redirected to the specific website where you can find the telephone number and form to contact the technical assistance

For further information about the product, please consult https://eprel.ec.europa.eu/ or scan the QR on the energy label supplied with the appliance

0 2 3 4 6 8

The above image is the control panel, and only the buttons on left and right are functional to control the refrigerator. The left button is to switch on/off the refrigerator, while the right button is to adjust the temperature.

Press this button for 3 seconds to switch the appliance on or off.

This product has power-off or power failure memory function.

This button is used to adjust the temperature within the fridge. Press this sensor to make adjustment, the number starts to flash, and if the button stops, the lit number flashes, after 5 seconds stop flashing, and the temperature shift corresponding to the number is confirmed, and then as many times as necessary until the desired level is selected. The settings range from super cooling, 2°C, 3°C, 4°C, 6°C, 8°C, and it will represent the approximate fridge temperature.

Start super cooling: when super cooling selected, it means refrigerator will work at 2^ C for 24 hours, after that, the function will quit automatically, then back to the original temperature setting.

Position	Conditions
2&3	Summer or ambient temperature between 25-35 °C
4	Spring, autumn or ambient temperature between 15-25 °C
6&8	Winter, or ambient temperature between 5-15 °C

Please note: Where possible, avoid having the temperature setting on super cooling or 2^ C all of the time. This will help to alleviate strain on the compressor and refrigeration system. Press the for 15s,

key flickering, then access to the laboratory adjustable state

Diagram of a boat hull with directional arrows indicating movement or force (no text or symbols)

The lamp replacement operation instructions are as follows:

Replace the lights (lamp parameter: 12V/5W)

1, Unplug the power plug.
2. Remove the top light cover with a screwdriver, then replace the new LED light board.
3, Use the screwdriver install the light cover back to original place,

1. Make sure that the refrigerator is unplugged, remove the hinge cover on the right side of refrigerator.

Remove the screws on the upper hinge, and then remove the hinge and the fridge door.

Line drawing of a cabinet with a handle and a tool, showing motion direction (no text or symbols)

1. Remove the screws that on the center hinge.

Pure technical line drawing of a mechanical component or housing with no text, numbers, or symbols

1. Remove the screws that on the bottom of right side of refrigerator, then remove the lower hinge and adjustable feet.

Simple line drawing of a container with a handle and two small objects below, no text or symbols present.

1. Remove the stopper on the bottom of right side of fridge door 1-2, then get the opposite door stopper from the accessory bag, install it on the bottom of left side of fridge door, after that do the same for the freezer door. 2-3 Remove the pin shaft from the lower hinge, and install to other side.

Simple line drawing of a curved panel with directional arrows and a separate mechanical component with rotation arrow (no text or symbols)

1. Remove the hinge hole cover from right side of freezer door, then install to left side. Remove the center hinge screw cover on the left side of cabinet, then install its to right side of cabinet.

Two technical line drawings showing structural changes: one with downward arrows and a flat panel, the other with a curved panel and a rectangular opening (no text or symbols)

1. Install the lower hinge to the left side of cabinet, then install two adjustable feet on the current position, after that install the freezer door directly.

Line drawing of a cabinet with tools and components, no text or symbols present

1. Install the center hinge to the left side, then install the fridge door

Diagram showing a device interacting with a window and a separate panel, no text or symbols present

1. Remove the upper hinge hole cover from left of Cabinet, then install to the right side,

Use the screwdriver install the upper hinge to the left side of cabinet, then install hinge cover on the current position.

Simple line drawing of a table with a tool and arrows indicating movement or force (no text or symbols)

KASUTUSJUHEND

CITY COMBI

Two stacked rectangular blocks with no text or symbols

OHUTUSTEAVE

Technical diagram of a refrigerator with numbered parts for identification

Diagram of a boat hull with directional arrows indicating movement or force (no text or symbols)

Simple line drawing of a cabinet with an open door and tools, no text or symbols present

Pure technical line drawing of a mechanical component with no text or symbols

Simple line drawing of a container with a side panel and two small objects below, no text or symbols present.

Simple line drawing of a curved panel with directional arrows and a separate mechanical component with rotation arrow (no text or symbols)

Two technical diagrams showing structural changes under compression, with arrows indicating force direction (no text or symbols)

Diagram showing a folding panel with tools and a separate blank panel, no text or symbols present

Diagram showing a device interacting with a window and a blank panel, no text or symbols present

Simple line drawing of a table with an object on top and arrows indicating direction (no text or symbols)

NAUDOTOJO VADOVAS

„CITY COMBI“

Two stacked rectangular blocks with no text or symbols

SAUGOS INFORMACIJA

Technical diagram of a refrigerator with numbered parts for identification

Diagram of a boat with directional arrows indicating movement or force (no text or symbols)

Line drawing of a cabinet with tools and a curved door, no text or symbols present

Diagram of a mechanical device with arrows indicating motion or force, no text or symbols present

Simple line drawing of a container with a side panel and directional arrows indicating flow or movement (no text or symbols)

Diagram showing a curved panel with directional arrows and a mechanical component with rotational motion (no text or symbols)

Diagram showing two views of a folded panel with arrows indicating force or movement (no text or symbols)

Diagram showing a folding panel with tools and a separate blank panel, no text or symbols present

Simple line drawing of a window with a tool and a ruler inside, next to an open door (no text or symbols)

Simple line drawing of a table with a tool and a small object on top, no text or symbols present.

LIETOTĀJA ROKASGRĀMATA CITY COMBI

Two stacked rectangular blocks with no text or symbols

DROŠĪBAS INFORMĀCIJA

Technical diagram of a refrigerator with numbered parts for identification

Diagram of a boat hull with directional arrows indicating movement or force (no text or symbols)

Line drawing of a cabinet with tools and a curved base, no text or symbols present

Pure technical line drawing of a mechanical component with no text or symbols

Simple line drawing of a boat hull with a speedometer and directional arrows indicating speed (no text or symbols)

Diagram showing a curved panel with directional arrows and a mechanical component with rotational motion (no text or symbols)

Two technical diagrams showing structural changes under compression, with arrows indicating force direction (no text or symbols)

Diagram showing a cabinet with tools and a door, no text or symbols present

Diagram showing a device interacting with a window and a blank panel, no text or symbols present

Simple line drawing of a table with a ruler and a small object on top, no text or symbols present