FG117320.1 - Detector Emerio - Free user manual and instructions

Product type	Electric convection frost protection heater
Brand	Emerio
Model	FG117320.1
Supply voltage	220-240 V ~ 50-60 Hz
Rated power	450-520 W
Temperature control type	Rotatory mechanical thermostat
Frost protection function	Yes, maintains a minimum temperature to prevent frost
Operation indicator	Indicator light switches on during operation
Overheat protection	Temperature threshold detector with automatic cut-off and reset
Intended use	Well-insulated indoor rooms, frost protection
Mounting	Removable screw-on feet (included)
Cleaning	Damp cloth, without abrasive cleaners
Warranty	2 years from date of purchase
Standards and compliance	European Directive 2012/19/EU (WEEE) and EU Regulation 2015/1188
Included accessories	Feet and mounting screws
Heating type	Natural convection
Child safety	Use by children aged 8 years and above under supervision
Prohibitions	Do not cover, do not use near water, do not connect to timer

Frequently Asked Questions - FG117320.1 Emerio

How to install the feet of the frost protection heater?

Place the two feet at the bottom of the device, aligning the protrusions and grooves on each side. Tighten the two supplied screws to secure the feet firmly.

How to set the desired temperature?

Turn the rotary knob fully to the right until it stops. Wait until the desired room temperature is reached, then slowly turn the knob to the left until the control light switches off. The knob position then corresponds to the required temperature.

What are the essential safety instructions?

Do not cover the device. Do not use it near a bathtub, shower, or swimming pool. Do not connect to a timer or remote control system. Keep flammable materials away. Unplug before cleaning.

What to do if the heater is not heating?

Check that the device is plugged into a working socket and the thermostat is set above room temperature. If the indicator does not light up, the overheat detector may have cut the power: wait for cooling then press reset. If the problem persists, contact customer service.

Can I use this heater in a bathroom?

No, it is forbidden to use the device near a bathtub, shower, or swimming pool due to the risk of splashes and humidity. Use it only in dry rooms.

How to clean the device?

First unplug the device and let it cool. Clean the housing with a damp cloth and mild detergent. Do not use abrasive cleaners and avoid any water penetration inside.

What is the electrical power of the heater?

The power is between 450 and 520 watts, for a voltage of 220-240 V ~ 50-60 Hz.

What is the warranty period?

The warranty is 2 years from the date of purchase, subject to presentation of the receipt. It does not cover damage due to improper use or repairs by unauthorized third parties.

Is this device suitable for outdoor use?

No, the frost protection heater is designed for indoor household use only. Do not use it outdoors or in vehicles or machinery.

What does the indicator light mean?

The control light switches on when the heater is heating. It switches off when the set temperature is reached or when the heating is in standby mode. It does not light up in frost protection mode if the temperature is sufficient.

USER MANUAL FG117320.1 Emerio

White electric heater with ventilation slots and a brand logo (no visible text or symbols on the device body)

Frost guard (EN)

Frostwächter (DE)

Instruction manual – English ...... - 2 -

Many thanks for choosing our product.

Please read the following information carefully before using the appliance for the first time for your own safety and to ensure correct use.

This product is only suitable for well insulated spaces or occasional use.

SAFETY INFORMATION

The appliance must only be used as described in the instructions for use. Use for any other purpose is inadmissible! Any damage attributed to incorrect operation, improper use or non-observance of the safety information will invalidate all liability and the warranty!

1. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.

2. Children shall not play with the appliance.

3. Cleaning and user maintenance shall not be made by children without supervision.

4. Children of less than 3 years should be kept away unless continuously supervised.

5. Children aged from 3 years and less than 8 years shall only switch on/off the appliance provided that it has been placed or installed in its intended normal operating position and they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children aged from 3 years and less than 8 years shall not plug in, regulate and clean the appliance or perform user maintenance.

6. CAUTION — Some parts of this product can become very hot and cause burns. Particular attention has to be given where children and vulnerable people are present.

7. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
8. This appliance is intended to be used in household and similar applications such as: staff kitchen areas in shops, offices and other working environments; farm houses; by clients in hotels, motels and other residential type environments; bed and breakfast type environments.
9. Warning: in order to avoid overheating, do not cover the heater.

1. means "DO NOT COVER".

2. The heater must not be located directly below a power outlet.

3. Don't use this heater in the immediate surroundings of a bath, a shower or a swimming pool.
4. CAUTION: In order to avoid a hazard due to inadvertent resetting of the thermal cutout, this appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by the utility.
5. Only connect the appliance to A.C. mains as specified on the rating plate! Ensure that the plugs and cord allow high power.
6. The frost protector should not be installed in areas with fire hazards, such as garages, stables, or wooden shed. This also applies to rooms in which highly inflammable gases or dust can develop. Danger of fire!
7. The room to be heated should not contain any easily inflammable materials (e.g. petrol, solvent, spray canisters etc.) or other easily combustible materials (e.g. wood or

paper). Keep such materials away from the equipment. Danger of fire!

1. The surface of the heater becomes hot. Do not install directly below an electrical socket.
2. Do not use the frost protector when the unit or power cable is defective. Repairs are only to be carried out by a specialist.
3. Never operate the appliance with wet hands! Danger to life!
4. The unit is ready for use even when at the lowest setting level. In order to switch off the frost protector, pull out the power supply plug or turn off the permanently installed disconnecting switch (e.g. automatic cut-out, installation switch etc.)
5. This heater is mainly used as frost guard.
6. The appliance should not be operated by means of an external timer-switch or by means of a separate system with remote control not originally belonging to this appliance.
7. This heating device is not suitable for assembling in vehicles and machines.
8. Regarding the information pertaining to the installation, please refer to the below paragraph of the manual.

These instructions for use belong to the appliance and must be kept in a safe place. When changing owners, these instructions must be handed over to the new owner!

USAGE

The frost protector with thermostat is for keeping small rooms free from frost. It can only be used within the home and for the purposes described. It is not for outdoor use.

DESCRIPTION

The frost protector is an electrical convector heater. It is fitted with a thermostat for maintaining the desired temperature. A control lamp lights up when the frost protector starts to heat up. The thermostat controls the room temperature and switches the heater on or off as necessary. The built-in temperature-monitor switches the unit off if it is too hot and switches it on again after cooling down. The heater is always ready for use. To switch off the frost protector, pull out the plug at the mains. In its minimum (fully anti-clockwise) position, the thermostat provides a frost guard position. In this position (depending on the size of the room) the heater will maintain the temperature above freezing.

ASSEMBLY OF THE HEATER

Before using the heater, the feet must be fitted onto the unit.

1. Place the two feet at the bottom of the appliance.
2. Match the bulge and groove at each side to fit the two feet.
3. Tighten the two screws provided to fix the two feet at the bottom of the appliance.

Illustration of a hand using a tool to lift a rectangular object, no text or symbols present

OPERATING INSTRUCTIONS

The rotary knob and the marking on the casing show the setting of the thermostat.

To set the required room temperature: turn the knob to the right fully and wait until the required temperature has been reached. Turn the knob slowly back again until the control lamp goes off. Now the position of the knob corresponds to the required temperature.

TAKING CARE OF YOUR FROST PROTECTOR

Before cleaning the appliance disconnect the plug from the power supply and let it cool down completely. Clean the casing occasionally with a damp cloth. Do not use any strong cleaning materials and do not allow water to penetrate the appliance.

TECHNICAL DATA

Operating voltage: 220-240V \~ 50-60Hz

Power consumption: 450-520W

GUARANTEE AND CUSTOMER SERVICE

Before delivery our devices are subjected to rigorous quality control. If, despite all care, damage has occurred during production or transportation, please return the device to your dealer. In addition to statutory legal rights, the purchaser has an option to claim under the terms of the following guarantee:

For the purchased device we provide 2 years guarantee, commencing from the day of sale. If you have a

defective product, you can directly go back to the point of purchase.

Defects which arise due to improper handling of the device and malfunctions due to interventions and repairs by third parties or the fitting of non-original parts are not covered by this guarantee. Always keep your receipt, without the receipt you can't claim any form of warranty. Damage caused by not following the instruction manual, will lead to a void of warranty, if this results in consequential damages then we will not be liable.

Neither can we hold responsible for material damage or personal injury caused by improper use if the instruction manual is not properly executed. Damage to accessories does not mean free replacement of the whole appliance. In such case please contact our service department. Broken glass or breakage of plastic parts is always subject to a charge. Defects to consumables or parts subjected to wearing, as well as cleaning, maintenance, replacement of said parts or shipping and transportation costs to and from any place of repair are not covered by the warranty and are to be paid.

ENVIRONMENT FRIENDLY DISPOSAL

Recycling – European Directive 2012/19/EU

This marking indicates that this product should not be disposed with other household wastes. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was

purchased. They can take this product for environmental safe recycling.

Declare that the product detailed below:

Information requirements for electric local space heaters

Model identifier(s):
Item	Symbol	Value	Unit	Item	Unit
Heat output				Type of heat input, for electric storage local space heaters only (select one)
Nominal heat output	P_nom	0.45-0.52	kW	manual heat charge control, with integrated thermostat	No
Minimum heat output (indicative)	P_min	0.45	kW	manual heat charge control with room and/or outdoor temperature feedback	No
Maximum continuous heat output	P_max,c	0.52	kW	electronic heat charge control with room and/or outdoor temperature feedback	No
Auxiliary electricity consumption				fan assisted heat output	No
At nominal heat output	el_max	N/A	kW	Type of heat output/room temperature control (select one)
At minimum heat output	el_min	N/A	kW	single stage heat output and no room temperature control	No
In standby mode	el_SB	0	kW	Two or more manual stages, no room temperature control	No
				with mechanic thermostat room temperature control	Yes
				with electronic room temperature control	No
				electronic room temperature control plus day timer	No
				electronic room temperature control plus week timer	No
				Other control options (multiple selections possible)
				room temperature control, with presence detection	No
				room temperature control, with open window detection	No
				with distance control option	No
				with adaptive start control	No
				with working time limitation	No
				with black bulb sensor	No

Contact details

Migros-Genossenschafts-BundLimmatstrasse 152CH-8031 Zürich

Satisfies the requirement of the Council Directives:

COMMISSION REGULATION (EU) No 2015/1188 of 28 April 2015 and Amending COMMISSION REGULATION (EU) 2016/2282 implementing Directive 2009/125/EC of the European Parliament and of the Council with regard to ecodesign requirements for local space heaters

Regarding information for consumers on how to install, use and maintain the product, WEEE information, please check the instruction manual provided with packaging.

Illustration of a hand using a tool to lift a rectangular object, with no visible text or symbols.

Illustration of a hand using a tool to lift a rectangular object with a curved arrow, no text or symbols present

INSTRUCTIONS D'EXPLOITATION

Illustration of a hand using a tool to lift a rectangular object, with no visible text or symbols.