850008 - Soap dispenser BARTSCHER - Free user manual and instructions

USER MANUAL 850008 BARTSCHER

Wall-mounted soap dispenser Article number:

Housing: aluminum; tank: plastic Capacity:

wall holder and fastening materials

Properties o Perfect for public toilets in food service, hotels, airports, etc. o Hygienic dispensing of common liquid soaps by hand or elbow. o Manual pump system requires no cartridge o Plastic tank with fill level indicator o Easy to maintain

Installation o Unpack the soap dispenser and fastening materials, and remove all packing materials. o Mount the soap dispenser near a sink for easy accessibility. Follow the instructions below:

1 Press the soap tank up and pull it to the front of the housing. Fill the tank with commercially available liquid soap. 2 Free the wall mount on the housing by pressing it in then down. 3 Disconnect the wall mount from the soap dispenser.

4 Mark and drill 3 holes in the wall at the desired height. 5 Place the supplied spring pins in the holes. Fix the wall mount using the supplied screws. 6 Next, hang the housing of the soap dispenser on the wall mount. 7 Insert the hose into the soap and slide the tank up until it rests securely on the lower support.

• To fill the dispenser, press the tank up and pull it forward. Fill it, then replace it in the housing.

• Soap can be dispensed by pressing the pump either by hand or elbow.- 8 - Cleaning

• Clean the soap dispenser with a soft, moist cloth.

• Never use harsh cleaning substances that could scratch the surface.

• After cleaning, dry and polish the surface with a dry cloth.

5. Colocar as buchas que