MILWAUKEE 298020 - Grinder

298020 - Grinder MILWAUKEE - Free user manual and instructions

Find the device manual for free 298020 MILWAUKEE in PDF.

English EN ⬇ Download 💬 AI Question ❓ 10 questions ⚙️ Specs
📄

Document temporarily unavailable

The manual is currently being transferred to our new server. It will be accessible again in a few hours. Thank you for your patience.

View the manual : Français FR English EN Español ES
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Brushless Angle Grinder
Brand Milwaukee
Model 2980-20 / 2981-20
Power Source M18™ lithium-ion battery, 18 V DC
No Load Speed 9,000 RPM
Max. Wheel Capacity 150 mm (6 in) × 6 mm (1/4 in)
Spindle Thread 5/8 in - 11
Guard Diameter 114 mm (4-1/2 in) or 150 mm (6 in)
Switch Type (2980-20) Paddle trigger with lock-on button
Switch Type (2981-20) Slide switch with lock-on
Electronic Brake Yes, stops disc in approximately 3 seconds
Soft Start Yes, reduces reaction torque at start-up
Operating Temperature -18 °C to 50 °C (0 °F to 125 °F)
Side Handle Yes, removable, 3 mounting positions
Protective Guard Tool-free adjustable, 5 positions
Dust Screen Removable, improves motor life
Applications Grinding, sanding, wire brushing, cutting
Maintenance Clean vents regularly, keep dry
Warranty 5 years (tool), subject to conditions

Frequently Asked Questions - 298020 MILWAUKEE

What types of batteries can I use with the Milwaukee 298020?
Use only Milwaukee M18™ series batteries. The charger must also be M18™ type.
How to install the protective guard?
Remove the battery. Align the guard tabs with the tool notches, press the locking lever and push the guard until it clicks. Adjust position by pressing the lever and turning the guard.
Can I use 115 mm wheels on this model?
Yes, but only with a 114 mm (4-1/2 in) guard. 150 mm wheels require a 150 mm guard. Always use the appropriate guard.
How does the electronic brake work?
The brake activates automatically when you release the trigger or switch. It stops the disc in approximately 3 seconds. If braking time increases, have the tool repaired.
What regular maintenance is required?
Clean the air vents regularly with compressed air. Keep the tool clean and dry. Inspect accessories before each use. Replace worn parts.
How to change the wheel?
Remove the battery. Use the spindle lock. Unscrew the FIXTEC nut counterclockwise. Replace the wheel, then screw the nut back on, tightening firmly with the tab.
Is this model suitable for sanding?
Yes, you can use abrasive discs with a backing pad. Remove the guard for sanding. Hold the tool at an angle of 5° to 15°.
What to do if the tool does not start?
Check that the battery is charged and properly inserted. Clean the contacts. If the problem persists, contact an authorized Milwaukee service center.
What accessories are recommended?
Use Milwaukee wheels, discs and brushes designed for this tool. Respect the maximum dimensions and rated speeds indicated on the tool.
Where can I get the tool repaired under warranty?
Go to an authorized Milwaukee service center. Visit www.milwaukeetool.com or call 1-800-SAWDUST.

User questions about 298020 MILWAUKEE

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Grinder in PDF format for free! Find your manual 298020 - MILWAUKEE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 298020 by MILWAUKEE.

USER MANUAL 298020 MILWAUKEE

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : MILWAUKEE

Model : 298020

Category : Grinder