HOCE4T618EWK - Refrigerator HOOVER - Free user manual and instructions

Product type	Fridge-freezer
Brand	Hoover
Model	HOCE4T618EWK
Dimensions (space required)	Width: 920 mm, Depth: 1137 mm
Capacity	Not specified
Climate class	Not specified
Noise level	Not specified
Power supply	230 V, 50 Hz (standard)
Energy class	Not specified
Refrigerant	Not specified
Main functions	Super Cool, Super Freeze, Eco Mode, Holiday Mode, Fine adjustment, Built-in Wi-Fi, Automatic defrost
Refrigerator temperature	2 °C to 8 °C (adjustable by 1 °C via app, default 4 °C)
Freezer temperature	-25 °C (Super Freeze) to -18 °C (default)
Control panel	Touch LED screen with SET and On/Off buttons
Wi-Fi	Yes, 2.4 GHz, max power 100 mW, compatible with hOn app
Door reversibility	Yes, reversible (tools required)
Defrost	Automatic (no action required)
Vegetable drawer humidity control	Yes, adjustable slider
Maintenance	Regular cleaning of interior and door seals
Error codes	Flashing 6 °C LED = fan error

Frequently Asked Questions - HOCE4T618EWK HOOVER

How to adjust the refrigerator temperature?

Open the refrigerator door and press the SET button. The temperature changes in steps: 2 °C, 4 °C, 6 °C, 8 °C. A beep confirms the change. You can also adjust the temperature in 1 °C steps via the hOn app.

How to activate Super Cool mode?

Press the SET button repeatedly until the Super Cool light turns on. The refrigerator temperature goes to 2 °C. The function stops automatically after 30 minutes. You can also activate it via the app.

How to activate Super Freeze?

This function can only be activated via the hOn app. Select Super Freeze in the app; the freezer temperature goes to -25 °C. It automatically deactivates after 50 hours.

How to activate Eco Mode?

Eco Mode can only be activated via the hOn app. It sets the refrigerator to 5 °C and the freezer to -18 °C to optimize storage. To exit, deactivate it in the app or change a function on the panel.

How to use Holiday Mode?

Activate it in the hOn app. The refrigerator goes into low energy mode (lights off) but the freezer remains normal. To exit, deactivate it in the app or select another function on the panel.

What to do in case of an error code?

If the 6 °C light flashes, it indicates a fan error. Please contact Hoover technical support to resolve the issue.

How to reverse the door opening direction?

The door is reversible. You will need a screwdriver. Follow the steps in the manual: remove the top, middle, and bottom hinges, then reassemble them on the other side. The reversibility kit is included.

How to connect the refrigerator to Wi-Fi?

Download the hOn app and create an account. Press and hold the SET button (2 seconds) to activate Wi-Fi: the icon flashes. Follow the instructions in the app for pairing. The Wi-Fi then connects automatically.

How to adjust the vegetable drawer humidity?

Near the vegetable drawer there is a slider. Push it to the left to increase humidity, to the right to decrease it. This adapts the storage of fruits and vegetables.

How to perform manual defrosting?

No manual defrosting is necessary. The refrigerator and freezer compartments defrost automatically. Condensation water drains through an opening and evaporates.

USER MANUAL HOCE4T618EWK HOOVER

PRODUCT DESCRIPTION....2

Space requirements....2

USE 3

Use....3

Customized temperature....3

Fine Tuning....4

Super Cool function .... 4

Super Freeze function....4

Eco mode....5

Holiday function....5

Defrosting....5

Demo mode....5

Error codes 5

APP CONNECTION (Content only) 6

IN APP PAIRING PROCEDURE 6

Step 1....6

Step 2....6

Step 3....6

WiFi Use 7

DOOR REVERSIBILITY 8

PRODUCT DESCRIPTION

1. Control panel and light
2. Movable Shelves
3. Crisper
4. Freezer drawers
5. Balconies
6. Levelling feet

* The most energy-saving configuration requires drawers, food box and shelves to be positioned in the product, please refer to the above pictures. ** The pictures above are only for reference. The actual configuration will depend on the physical product or statement by the distributor.

Space requirements

The unit's door must be able to fully open as shown. Spare enough space for convenient opening of the doors and drawers.

Keep a distance of at least 50 mm between the side walls of the product and adjacent parts.

Width: min. 920 mm

Depth: min. 1137 mm

USE

① ON/OFF key, used to switch on/off the appliance. ② SET key, used to select the fridge temperature or the special functions like. ③ WiFi Icon, shows if the appliance is connected to the app. ④ Super Cool Icon, shows if the function is activated. ⑤ Temperature levels, show which is the selected temperature.

Use

• Plug on the appliance. The appliance will turn on automatically.
• The temperature will automatically set at 4 °C in the fridge and -18 °C in the freezer.
• To change the temperature, with the fridge door open, press the SET key. When the setting increases, the corresponding LED light will turn on. An acoustic signal is made every time the SET key is pressed and the temperature is changed. • In case of power loss, the last cooling level set will be restored.
• To restore the default setting, at the screen lit, keep pressed the TEMP button, and then press ON/OFF button 5 times in 5 seconds.
• Under the normal operating condition (in spring and autumn), it is recommended to set the temperature at 4 °C. In summer when the ambient temperature is high, it is recommended to set temperature at 6~8 °C, so as to guarantee the fridge and freezer temperatures and reduce the refrigerator continuous running time; and in winter when the ambient temperature is low, it is recommended to set temperature at 2~4 °C to avoid frequent start/stop of the refrigerator.

Customized temperature

From the app, it is possible to customize the temperature of the fridge compartment. The temperature can be set with 1 °C sensitivity and it is possible to select a temperature from 2 °C to 8 °C in the fridge. An acoustic signal is made every time the temperature is changed. When the temperature is selected by the app, there is no indication on the control panel, all the temperature LED lights are turned off, while only the WiFi icon is turned on.

Fine Tuning

The fine tuning selection SET gives to possibility to set the temperatures by sublevels; each temperature level has three sublevels.

How to use the fine tuning function:

• Press the SET key for 8 seconds to enter fine tuning selection mode. When the appliance enters the mode, an acoustic signal is made and the LED of currently selected cooling level blinks.
• By short pressing the SET key within 5 seconds, the fine tuning setting increases and, at each pressing, an acoustic signal is made.
• During fine tuning, the LED of the selected cooling level is fixed, while the LED of the selected sublevel blinks.
• If no key is pressed for 5 seconds, the system automatically exits from fine tuning selection mode. The fine tuning setting is saved and the LED of the selected fridge temperature is fixed.
• If the fine tuning is activated again, the setting will start from the previously stored level.

Super Cool function

It is suggested to switch on the Super Cool function if a large quantity of food should be stored (for example after the purchase). The Super-Cool function accelerates the cooling of fresh food and protects the goods already stored from undesirable warming. When the function is activated, the temperature of the fridge is automatically set at 2 °C.

How to use the Super Cool function:

• The function can be activated by pressing many times the SET key until the Super Cool LED is turned ON or by selecting it from the app. If the function is activated, the corresponding icon on the control panel will be turned on. • To exit the Super Cool function, press the SET key again.
• The Super Cool function automatically ends after 30 hours running.
• When the Super Cool ends, the corresponding icon of the control panel turns off and the previously set cooling level is restored.

Super Freeze function

The super freezing function accelerates the freezing of fresh food and protects the goods already stored from undesirable warming. If a large amount of food has to be freeze, it is recommended to set the Super Freeze function on 24h before the usage. When the function is activated, the temperature is automatically set at -25 °C.

How to use the Super Freeze function:

• The function can be launched only by selecting it from the app. If the function is activated, it will be shown by the app; there is no indication on the control panel. To exit the Super Freeze function, turn it off from the app.
• The Super Freeze function automatically ends when the function has lasted for more than 50 hours.

Eco mode

The Eco mode can be activated to optimize the performance of the appliance, while obtaining the best food storage. When the function is activated, the temperature is automatically set at 5 °C in the fridge, and at -18 °C in the freezer.

How to use the Eco mode:

• The function can be activated only by selecting it from the app. If the function is activated, it will be shown by the app; there is no indication on the control panel.
• To exit the Eco mode, turn it off from the app; the previously selected temperature will be restored.
• The Eco mode automatically ends when another function is chosen from the control panel.

Holiday function

The Holiday function can be used to reduce the energy consumption of the appliance, when it is not used regularly. When the function is on, the LED lights will be off (even if the door is open) and the fridge will work on low power consumption mode, whereas the freezer will keep working normally. How to use the Holiday function:

• The function can be activated only by selecting it from the app. If the function is activated, it will be shown by the app; there is no indication on the control panel.
• To exit the Holiday function, turn it off from the app; the previously selected temperature will be restored.
• The Holiday function automatically ends when another function is chosen from the control panel.

Defrosting

The defrosting of the refrigerator and freezer compartments is done automatically: no manual operation is needed.

Slider

Near the vegetable basket there is a slider that allows you to adjust the humidity inside it: moving it to the right decreases the humidity, moving it to the left increases the humidity.

Demo mode

Keep the refrigerated door open, press and hold the on / off key, and click the set key five times. The refrigerator will enter the Demo mode. To exit the mode, keep pressed the door switch and press again the mode key for 5s.

Error codes

If - 6 °C LED light is flashing, it means there has been a fan error. Please, contact the technical assistance to help solve the problem

APP CONNECTION (Content only)

IN APP PAIRING PROCEDURE

Step 1

• Download the hOn app on the stores

Step 2

- Create your account on the hOn App or log in if you already have an account

Step 3

- Follow pairing instructions in the hOn App

WiFi Use

To activate the Wi-Fi, long press the set key for 2 seconds. The Wi-Fi icon will turn on and an acoustic signal is made.

If the Wi-Fi has not been configured yet, when the refrigerator turns on, it will automatically enter the configuration mode and keep this status for 30 minutes. To use the configuration mode:

• Press the set key for 2s but less than 8s. The refrigerator enters the Wi-Fi configuration mode and an acoustic signal is made. The Wi-Fi icon starts blinking.
• Follow the instructions in the app to configure the Wi-Fi (see above).
• Once the Wi-Fi is configured and the connection established, the Wi-Fi icon is on and fixed.
• After 30 minutes without performing any operation, the Wi-Fi will automatically exit the configuration mode.
• If the Wi-Fi has already been configured, it will automatically reconnect according to the configuration information.

Radio-module - Technical data

Frequency rate (OFR)	2400 MHz-2843.5 MHz
Channel frequencies	2412...2472 MHz(step size 5 MHz)
Maximum power(EIRP)	100 mW

Radio equipment type is in compliance with Directive 2014/53/EU.

DOOR REVERSIBILITY

Tools needed: screwdriver

1. Remove the top hinge cover
2. Unscrew the top hinge
3. Remove the top hinge cover (left)
4. Remove middle hinge

1. Remove lower hinge
2. Mount hinge foot
3. Mount middle hinge
4. Mount the upper hinge plate
5. Mount the upper hinge cover

Summary

PRODUCT DESCRIPTION.... 10

Space requirements....10

USE....11

Use....11

Custom temperature....11

Step 2

Step 3

Summary

PRODUCT DESCRIPTION 19

PAIRING PROCEDURE WITH THE APP

Step 1

Step 2

Step 3

Overview

PRODUCT DESCRIPTION....27

Area requirements 27

USE 28

Use 28

Adjusted temperature 28

Fine-tuning....29

PAIRING PROCEDURE IN THE APP 31

Step 1....31

Step 2....31

Step 3....31

Wi-Fi connection....32

CHANGING THE DOOR HINGE SIDE 33

PRODUCT DESCRIPTION

PROCEDURE FOR PAIRING IN THE APP

Step 1

• Download the hOn app from the app stores

Step 2

Step 3

Summary

Step 2

Step 3

Summary

USE

Step 2

Step 3

Summary

USE

Step 2

Step 3

Summary

PRODUCT DESCRIPTION 60

Space required....60

USE....61

Use....61

Step 2

Step 3

Summary

PRODUCT DESCRIPTION....68

Space required 68

USE....69

Use....69

Step 2

Step 3

Summary

PRODUCT DESCRIPTION....76

Space requirements 76

USE....77

Use 77

Adjusted temperature 77

Fine adjustment 78

Super cool function 78

Super freeze function....78

Eco mode....79

Holiday function 79

Defrosting....79

Step 2

Step 3

- Follow the pairing instructions in the hOn app

Using the Wi-Fi network

To activate the Wi-Fi network, press and hold the SET button for 2 seconds; the Wi-Fi network icon turns on and an audible signal is emitted.

If the Wi-Fi network has not been configured when the refrigerator is turned on, it automatically enters configuration mode and remains in this status for 30 minutes. To use configuration mode:

• Press the SET button for 2 seconds, but not longer than 8 seconds; the refrigerator enters Wi-Fi network configuration mode and an audible signal is emitted. The Wi-Fi network icon starts blinking.
• Follow the instructions in the app to configure the Wi-Fi network (see above).
• Once the Wi-Fi network is configured and the connection is established, the Wi-Fi network icon turns on and remains steadily lit.
• After 30 minutes without any action, the Wi-Fi network automatically exits configuration mode.
• If the Wi-Fi network has already been configured, it automatically reconnects according to the configuration information.

Radio module - Technical data

Učestalost (OFR)	2400 MHz-2843.5 MHz
Frekvencije kanala	2412...2472 MHz(veličina koraka 5 MHz)
Maksimalna snaga(EIRP)	100 mW

1. Remove the lower hinge
2. Install the hinge base
3. Install the middle hinge
4. Install the upper hinge plate
5. Install the upper hinge cover

Summary

PRODUCT DESCRIPTION....84

SPACE REQUIREMENTS....84

USE 85

Use 85

Step 2

Step 3

Index

USE

Step 2

Step 3

Summary

PRODUCT DESCRIPTION....100

USE

Step 2

Step 3

Summary

PRODUCT DESCRIPTION....108

Space requirements 108

USE 109

Use 109

Custom temperature 109

Fine-tuning....110

USE

Step 2

- Create your account on the hOn app, or log in if you already have an account

Step 3

Summary

PRODUCT DESCRIPTION 116

Step 2

Step 3

Summary

Width: min. 920 mm

Depth: min. 1137 mm

USE

Step 2

Step 3

Table of contents

PRODUCT DESCRIPTION 132

USE

Step 2

Step 3

Table of contents

War 2

War 3

Summary

PRODUCT DESCRIPTION....149

USE

Step 2

Step 3

Summary

PRODUCT DESCRIPTION 157

Space requirements....157

USE....158

Use 158

Custom temperature 158

Fine adjustment 159

Super Cool function 159

Super Freeze function 159

ECO mode 160

Holiday function....160

Defrosting....160

Demonstration mode....160

Error codes 160

CONNECTION WITH THE APP (content only)....161

PAIRING PROCEDURE IN THE APP 161

1. step....161
2. step....161
3. step....161

Using Wi-Fi....162

REVERSIBLE DOORS....163

PRODUCT DESCRIPTION

USE

Step 2

Step 3

Summary

PRODUCT DESCRIPTION....165

Space requirements....165

USE....166

Use 166

Adjusted temperature 166

USE

① The ON/OFF button is used to turn the appliance on/off. ② The SET button is used to select the refrigerator temperature or special functions. ③ The Wi-Fi icon shows whether the appliance is connected to the app. ④ The Super Cool icon shows whether the function is activated. ⑤ The temperature levels show which temperature is selected.

Use

• Turn on the appliance. The appliance will turn on automatically. • The temperature will be automatically set to 4 °C in the refrigerator and -18 °C in the freezer.
• To change the temperature, with the refrigerator door open, press the SET button. As the setting increases, the corresponding LED light will turn on. An acoustic signal is emitted each time the SET button is pressed and when the temperature changes.
• In the event of a power failure, the refrigerator will return to the last set cooling level.
• To restore the standard setting, while the display is lit, hold down the TEMP button and then press the ON/OFF button 5 times within 5 seconds.
• In normal operating conditions (in spring and autumn), it is recommended to set the temperature to 4 °C. In summer or when the ambient temperature is high, it is recommended to set the temperature to 6 – 8 °C, to guarantee refrigerator and freezer temperatures and reduce the continuous operating time of the refrigerator; and in winter or when the ambient temperature is low, it is recommended to set the temperature to 2 – 4 °C to avoid frequent on/off cycling of the refrigerator.

Custom temperature

From the app, it is possible to customize the temperature of the refrigerator compartment. The temperature can be adjusted with a sensitivity of 1 °C, and in the refrigerator it is possible to select a temperature from 2 °C to 8 °C. An audible signal is emitted with each temperature change. When the app selects a temperature, there is no indication on the control panel, all temperature LED lights are off, and only the Wi-Fi icon is on.

Step 2

Step 3

• Follow the pairing instructions in the hOn app

1. Remove the middle hinge
2. Remove the lower hinge
3. Install the hinge foot
4. Install the middle hinge
5. Install the upper hinge plate
6. Install the upper hinge cover

Summary

PRODUCT DESCRIPTION 173

IN APP CONNECTION MODE....177

Step 1....177

Step 2....177

Step 3....177

USAGE

Step 2

Step 3

Summary

PRODUCT DESCRIPTION 181

Step 2

Step 3

Summary

PRODUCT DESCRIPTION....189

USAGE

Step 2

Step 3