Burg Wächter WS Office 821 E - Safe

WS Office 821 E - Safe Burg Wächter - Free user manual and instructions

Find the device manual for free WS Office 821 E Burg Wächter in PDF.

📄 32 pages English EN ⬇ Download 💬 AI Question ❓ 10 questions ⚙️ Specs
Notice Burg Wächter WS Office 821 E - page 9
9 / 32
View the manual : Français FR Deutsch DE English EN Nederlands NL
Pick your language and provide your email: we'll send you a specifically translated version.
Product type Electronic safe
Brand Burg Wächter
Model WS Office 821 E
Safety standard ECB class C, EN 1300:2018
Power supply 4 AA Mignon LR6 alkaline batteries (1.5 V)
Opening 6-digit PIN code, fingerprint, multiple combination
Max. number of user codes 9
Number of administrator codes 1
Max. number of storable fingerprints 20
Lockout time 5 minutes after 15 incorrect attempts
Display Backlit screen (not specified)
Menu languages 12 languages including French
Timer functions Time/date setting, automatic summer/winter time change, delay
Firmware update Yes, via microSD card (FAT32)
Event history 2,000 entries
Maintenance and cleaning Clean the keypad with a microfiber cloth
Spare parts AA batteries, Torx T8 screwdriver provided
Warranty 2 years
Manufacturer BURG-WÄCHTER KG

Frequently Asked Questions - WS Office 821 E Burg Wächter

How to open the safe with the default PIN code?
Press the On/Enter key to activate the keypad, then enter the factory code 1-2-3-4-5-6 and confirm with the same key. Then turn the handle.
How to change the administrator code?
Open the door, activate the keypad, press Func to access the main menu. Select Code change, choose Administrator, confirm, enter the old code, then the new 6-digit code twice. Confirm with On.
What to do if I forgot my code?
The factory code is only valid for the first use. If forgotten, you must contact customer service. It is not possible to reset the code without the old one.
How to register a fingerprint?
Go to the menu Administrator > User > Create > Register a fingerprint. Enter the administrator code, then swipe your finger from top to bottom on the sensor several times until confirmation.
How to open the safe with a fingerprint?
Activate the keypad, then swipe your registered finger on the sensor. If the fingerprint is recognized, the screen displays Please turn the handle; turn the handle.
What to do in case of lockout after several errors?
After 15 incorrect attempts, the safe locks for 5 minutes. A countdown is displayed. Wait for the delay to end before trying again.
How to replace the batteries?
Use a Torx T8 screwdriver (provided) to remove the screws under the electronics. Slide the cover, replace the 4 AA batteries with new ones respecting polarity, then screw back.
How to set the time and date?
In the menu Administrator > Timer functions, select Time entry or Date entry. Enter the administrator code, then the numbers in HH:MM or DD.MM.YY format.
How to activate the delay?
Go to Administrator > Timer functions > Delay time. Enter the administrator code, then enter a delay from 0 to 99 minutes. Confirm.
What to do if the fingerprint reader does not recognize my finger?
Clean the sensor with a soft cloth. Make sure your finger is clean and dry. Swipe it slowly and straight in the center. If the problem persists, re-register the fingerprint.

User questions about WS Office 821 E Burg Wächter

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Safe in PDF format for free! Find your manual WS Office 821 E - Burg Wächter and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WS Office 821 E by Burg Wächter.

USER MANUAL WS Office 821 E Burg Wächter

USER.0002 CD
Kombination: [ ]
FUNC: M

Operating instructions

Design
Burg Wächter WS Office 821 E - 1

text_image A BURG WACHTER G E B BURG WACHTER 1 2.245 67900 On C D

A Display

B Number keys

The numbers "1" - "0" are used for input e.g. when entering the code.

C 'Func' key

Multifunction key which adapts to perform several functions, including: Go back one menu level, delete a entered character, show the Main menu. The display shows the current function of the key (see section 3).

D "On/Enter" key

The "On/Enter" key starts the system or selects the current menu item.

E "1" key

The key can be used to scroll up if there are several menu options. If this is possible, the display shows this (see section 3).

E "2" key

The key can be used to scroll down if there are several menu options. If this is possible, the display shows this (see section 3).

G Fingerprint sensor

Fingerprints can be stored via the fingerprint sensor and used to open the safe.

Dear customer,

Thank you for choosing a safe with a BURG-WÄCHTER SecuTronic lock. This electronic lock is certified according to ECB Class A. You have purchased a product that meets extremely high security requirements and was developed and produced according to current technical standards. This lock is certified according to EN 1300: 2018. (Classification of high-security locks according to their resistance to unauthorised opening).

Important: Please read the entire instruction manual before programming and keep this manual safe so that you can revisit it at a later date.

We hope you enjoy your new BURG-WÄCHTER safe. Your Burg-Wächter KG

General information

Activation

The electronics are switched on using the or key on the keyboard. This then lights up. At the same time, the display shows the BURG WÄCHTER logo for a moment before the input graphic for the pin code or fingerprint appears.

Languages

The menu navigation in the display is available in twelve languages and can be set via the "Languages" menu. Please refer to chapter "Menu Language" for a detailed explanation.

Blocking times

To protect against tampering, the lock electronics block access to the safe for five minutes if an incorrect pin code or an incorrect fingerprint has been entered fifteen times in succession. During this blocking time, the remaining time on the display runs countdown. It is not possible to open the safe during this period, even with a valid user or administrator code.

Increasing burglary protection

Please take care to ensure codes do not fall into the wrong hands. Therefore, store the codes in a safe location so that they can only be accessed by authorised persons. In the event you lose a code, the lock must be set to a new code.

• The factory code must be changed as soon as the lock is commissioned
- Codes that are easy to guess (e.g. 1, -2, -3, -4, -5, -6) must not be used
• Personal data (e.g. birthdays) or other data that may be guessed with knowledge of the code owner must not be used as a code.
• After changing the code, the lock must be checked several times with the
safety door opened

Attention: All changes to the administrator code, the factory code and the user code must be carried out with the safe door open! After changing a code, the lock must be operated several times with the new code with the safe door open.

Input options

Number keys:

The numbers "1" - "0" are used for input e.g. when entering the code.

Burg Wächter WS Office 821 E - Input options - 1

"Func" key:

Multifunction key which adapts to perform several functions, including; Go back one menu level,

delete a entered character, show the Main menu. The display shows the current function of the key.

"On/Enter" key:

The "On/Enter" button starts the system or selects the current menu item.

Keys "1" and "2":

In menus, you can scroll up and down using these keys.

If this is possible, the display shows this with the corresponding arrows.

Fingerprint sensor:

Fingerprints can be stored via the fingerprint sensor or used to open the safe

Burg Wächter WS Office 821 E - Input options - 2

Display

A Specifies whether you can use the key to cancel the last entry (◀) or switch to the main menu (M).
B (2▼) appears when you can scroll down using the "2" key.
c (1:▲) appears when you can scroll up using the "1" key.
D (■) indicates the battery level.
E (☐/☐) Indicates whether the locking mechanism has released the lock and the safe can be opened.

Burg Wächter WS Office 821 E - Display - 1

Burg Wächter WS Office 821 E - Display - 2

Opening

Opening with PIN code

Burg Wächter WS Office 821 E - Opening with PIN code - 1

Burg Wächter WS Office 821 E - Opening with PIN code - 2

  • Switch on the lock using the On key.
  • Enter the 6-digit PIN code (factory setting "1-2-3-4-5-6").
    • "Please turn the knot" appears in the display
  • Switch on the lock using the On key.
  • Enter the 6-digit PIN code (factory setting "1-2-3-4-5-6").
    • "Please turn the knot" appears in the display

Opening with fingerprint (Convenient opening)

Burg Wächter WS Office 821 E - Opening with fingerprint (Convenient opening) - 1

Burg Wächter WS Office 821 E - Opening with fingerprint (Convenient opening) - 2

  • Switch on the lock using the 92 key.
  • Move a programmed finger from the top to bottom centrally over
    the sensor.
    • "Please turn the knob!" appears in the display
  • Turn the knob.

Opening with access combinations

Burg Wächter WS Office 821 E - Opening with access combinations - 1

Burg Wächter WS Office 821 E - Opening with access combinations - 2

Burg Wächter WS Office 821 E - Opening with access combinations - 3

  • Switch on the lock using the key.
  • Move a programmed finger from the top to bottom centrally over the sensor.
  • If an additional authorisation request (code or fingerprint) has been set up, the message "enter next authorisation" will appear on the display. Enter the requested additional authorisation (code or fingerprint).
  • If a threefold authorisation request (3 PIN codes) has been set up, the message "Enter next authorisation" will appear on the display. Enter the 6-digit PIN code.
    • "Please have the knob!" appears in the display
  • Turn the knob.

Closing

After the safe has been closed, it is essential that the rotary knob is moved manually to its initial position. Ensure that the rotary knob is in the same position as in the following illustration.

Burg Wächter WS Office 821 E - Closing - 1

Setting up the menu structure

  • Change code
  • Language
  • Administrator

User

Create

Create code

Create fingerprint

Assign

Assign code

Assign fingerprint

Delete

Time function

Set time
Set date
Automatic STAWT
Delay time

Programming

Database update
Firmware update
Reorganise

Processes

Display
Save

Setup

Register
FP reset
Generate AES key

* Info

System info
System check

Description of the menu functions

Code Change menu

Change the administrator code and the user codes. We would like to point out that, for security reasons, the factory set administrator code must be changed to an individually set code.

  • 5witch on the lock using the 20 - key.
  • Then press Farc.
  • The "Mannex" appears.
  • Confirm with
    • You can use the keys 1 or 2 to scroll until the administrator/user is displayed and you wish to change the code for.
  • Confirm with On
  • Enter the old or factory code that was previously valid using the keypad and press ^21 .
  • Enter the new code using the keypad and confirm with ^0+ .
  • Repeat your entry and confirm it again with
    • "Code change completed" is displayed after
    a correct entry.
  • Press any key.

Note: When a safe lock is first started up, additional information on the current date and time are requested;

• Enter the day (2 digits)
• Enter the month (2 digits)
• Enter the year (2 digits)
• Enter the hour (2 digits)
+ Enter the minutes (2 digits)

Burg Wächter WS Office 821 E - Code Change menu - 1

Burg Wächter WS Office 821 E - Code Change menu - 2

Burg Wächter WS Office 821 E - Code Change menu - 3

Language menu

Switch on the lock using thekey.
Then pressFunc.
The "Mat/ menu" appears.
Scroll with the 1 or 2 key until the "Language" menu item is highlighted.
Confirm with.
"Mat mmu / language" appears.
Use keys 1 or 2 to scroll until the desired language is marked.
Confirm with.
"Data has been saved" appears in the display
Press any key.
MAIN MENU
Code changeLanguage/SpracheAdministrator...Info
1:▲ 2:▼ FUNC: <
LANGUAGE
ČeštinaDeutschEnglishEspañol
1:▲ 2:▼ FUNC: <

Administrator menu

This menu has several sub-menus to group functions. The functions within this section can only be fully used with the administrator code.
MAIN MENU
Code changeLanguage/SpracheAdministrator ...Info
1:▲ 2:▼ FUNC: <

Menu Administrator / User
Menu Administrator / User / Create

Sub-menu Administrator / User / Create /Create code
Switch on the lock using the key.
Then press free.
The "Menu menu" appears.
Scroll with the 1 or 2 key until the "Administrator" menu item is highlighted.
Confirm with
"Main menu / Administrator" appears.
Confirm with
"Main menu / Administrator / User" appears.
Confirm with
"Main menu / Administrator / User / Create" appears.
Confirm with
Enter the administrator code to acquire the authorisation for programming.
USERCreateAssignDelete
2:▼ FUNC: <
USER.0001 CDCombination:[FP]FUNC:M
  • The next free memory entry is displayed (e.g. USER.0002 CD).
  • Enter the 6-digit code and confirm it with
  • Use key 1 or 2 to scroll through the possible combinations.
    The following options are available:
    [1] No combination
    [1/2] Combination of 3-order
    [1/2] Combination of 2 orders
    [175] Combination of 3 codes
    [FP] Combination With one fingerprint
  • If you have not selected a combination, confirm 3x with On.
  • If you have selected the combination "FP", you will create your fingerprint as described in the sub-menu "Administrator/User/Create/Create fingerprint".

- Switch on the lock using the key.

- Then press Furlc.

• The "Most men" appears.

- Scroll with the 1 or 2 key until the "Administrator"

menu item is highlighted

Confiary with

- Commi with

• 2017/12/20

- Confirm with

• "Main menu / Administrator / User" appears.

- Confirm with

• "Main menu /Administrator /User /Create frame" appears

- Scroll with the 1 or 2 key until the "Create

finerpoint* many items is highlighted

- Confirm with

- Enter the administrator code to acquire the authorisation for programming.

• "Колити Довер" appears.

- Move the finger from the top to bottom

centrally and a number of times over the sensor.

• The display will either prompt you to repeat

the process (for error messages, see page 15), or the message "USERXXXFP created" will appear.

- Use key 1 or 2 to scroll through the possible

combinations.

The following options are available:

[1] No combination

[CD]. Combination with one code

[50] Combination with an additional

FFI Combination

ing

- Press any key.

USER.0002 CD569425Kombination:[FP]
1:▲FUNC: <
USER
Create CodeCreate Finger
1:▲FUNC: <
USER,0003 FPcreated!
FUNC: <

Menu Administrator / User / Assign
Sub-menu Administrator / User / Assign / Create code

  • Switch on the lock using the On key.
  • Then press Eurs
  • The "Houses" appears
  • Send with the 1 on 2 key until the Administrator?
    • Scroll with the 1 of 2 key on
    menu item is hi
  • Confirm with
    • Main menu / Administrator appears.
  • Confirm with
  • "Make menu /Administrator /the" appears.
  • Scroll with the 1 or 2 key until the "assam"
    many item is highlighted
    Conform with On
    • Confirm with
  • Main menu / Administrator / User / Assign Finger appears.
  • Confirm with
  • Enter the administrator code to acquire the
    authorisation for programming.
  • You can use the keys 1 or 2 to scroll until
    the user is marked whose code is supposed
    to be assigned
    to be assigned.
  • Confirm with
  • Enter the 6-digit code and confirm it with
  • Use key 1 or 2 to scroll through the possible
    combinations.
    The following options are available:
    [-] No combination
    [1/2]. Combination of 2 codes
    [1/2] Combination of 3 orders
    [175] Combination of 3 codes
    [FF] Combination with one fingerprint
  • If you have not selected a combination, confirm 3x with ^28 .
USER
Create Assign Delete
1:2:2:7 FUNC: <
USER
Assign Code Assign Finger
2:7 FUNC: <
8
USER.0001
1:▲2:▼FUNC: M

- Switch on the lack using the key.

- Then press Func.

- The "Main menu" appears.

- Scroll with the 1 or 2 key until the menu

item "Administrator" is highlighted.

- Confirm with 01.

• "Main menu /Administrator" appears.

- Confirm with

• "Main menu / Administrative / user" appears.

- Scroll with the 1 or 2 key until the "Assir"

menu item is highlighted

- Confirm with

- Scroll with the 1 or 2 key until the

Assign Anger menu item is highlighted.

- Confirm with

- Enter the administrator code to acquire

the authorisation for programming.

• "Main menu / AdminShaker / Beer / Assige Finger" appears.

- You can use the keys 1 or 2 to scroll until

the user is marked whose fingerprint is supposed to be assigned.

supposed to be assigned. Confirm with

• Confirm with

- Obie Mepill appears. - Move the finger from th

• Move the finger from the top to bottom centrally and a number of times over t

Centrally and a number of times over the sensor. The display will either prompt you to repeat the

- The display will either prompt you to repeat the process (for error messages, see page 15), or the message "USER.XXX.FP created!" will appear.

- Use key 1 or 2 to scroll through the possible

combinations.

The following options are available:

[-] No combination

[CD] Combination with one code

[FP] Combination with an additional

fingerprint

- Press any key.

USER
Create Assign Delete
1:▲ 2:▼ FUNC: <
USER
Assign Code Assign Finger
1:▲FUNC: <
USER.0003 FPcreated!
FUNC: <

Deleted users no longer have access to the safe. However, these remain in the history.

- Switch on the lock using the On key.

- Then press Fum.

• The "Man menu" appears.

- Scroll with the 1 or 2 key until the menu

item "Administrator" is highlighted.

- Confirm with

• Mechanical Analysis appears. Confirm with

• Commun wits 2

• "Main menu / Administrator / User" appears.

- Confirm with On One

- "Main menu /Administrator /User /Delete" appears.

- Scroll with the 1 or 2 key until the menu

item "Delete" is highlighted.

- Confirm with

- Enter the administrator code to acquire the authorisation for programming.

- You can use the keys 1 or 2 to scroll until the

user is marked whose code is supposed to

be deleted.

- Confirm with

- "Data has been deleted" appears.

- Press any key.

USER
Create
Delete
1:▲FUNC: <
USER.0001 CD
1:▲2:▼FUNC: M
Dataset has been deleted!
FUNC: <

Time and date can be set, as well as whether the system should automatically switch between Central European Summer/Winter Time. The delay time prevents quick opening in the event of

time prevents quick opening in the event of a robbery.

a TUBBERY.

ADMIN
UserTimer functionsProgrammingProcesses
1:▲2:▼FUNC: <

+ Switch on the lock using the On key.

- Then press Type.

• The "Main menu" appears.

- Scroll with the 1 or 2 key until the menu

item "Administrator" is highlighted.

- Confirm with

• "Main menu / Administrator" appears.

+ Scroll with the 1 or 2 key until the menu

Item "Amerfunctions" is highlighted.

• Confirm with

- "Administrator /Time entry" appears.

- Confirm with On

- Enter the administrator code to acquire

the authorisation for programming.

• The time (24-hour format) can be set via

the keypad

+ Confirm with On

- "Data has been saved!" appears.

• Press any key.

TIMER FUN ...
Time entryDate entryAutom. ST/WTDelay time
2:▼FUNC: <
Time entryH.M ■0.00
FUNC: M
  • Switch on the lock using the On key.
  • Then press Func.
  • The "Bolamew" appears.
  • Scroll with the 1 or 2 key until the menu
    Item "Administrator" is highlighted.
  • Confirm with On
    • "Main menu / Administrator" appears.
  • Scroll with the 1 or 2 key until the menu
    item "Time functions" is highlighted
  • Confirm with 0+
    • "Power functions" appears.
  • Scroll with the 1 or 2 key until the "Date entry"
    menu item is highlighted
  • Confirm with
  • Enter the administrator code to acquire the
    authorisation for programming.
    • The date can be set via the keynac
  • The date can be set via the keypad.
  • Confirm with 0s
    • "Iota has these cases"
  • Всего ветримого appearance.
  • Press any key.
TIMER FUN ...
Time entryDate entryAutom. ST/WTDelay time
1:▲ 2:▼ FUNC: <
Date entryD.M.Y ■0.00.00
FUNC: M

Automatic update between Central European

Summer/Winter Time.

  • Switch on the lock using the 12 key.
  • Then press func.
    • The "Main menu" appears.
  • Scroll with the 1 or 2 key until the menu
    item "Administrator" is highlighted.
  • Confirm with
  • "Administrator" appears.
  • Scroll with the 1 or 2 key until the menu
    item "Time functions" is highlighted
  • Confirm with
  • "Base functions" appears.
  • Scroll with the 1 or 2 key until the
  • menu item "Autom. S1/W?" is highlighted
  • Confirm with
  • Enter the administrator code to acquire the
    authorisation for programming.
    • The automatic time changeover can be
    switched on or off via key 1 or 2.
  • Confirm with
  • "Data has been saved" appears.
  • Press any key.
TIMER FUN ...
Time entry
Date entry
Autom. ST/WT
Delay time
1:▲ 2:▼ FUNC: <
Autom. ST/WT
ON|
1:▲ FUNC: M

tor / Delay time

The delay time sets up a required waiting time before a function is performed and can consequently prevent quick opening in the event of a robbery. After the delay time has elapsed, a valid and fully authorised entry must be repeated in order to gain access.

  • Switch on the lock using the 0+ key.
  • The press Fun:
  • The "Main new" appears.
  • Scroll with the 1 or 2 key until the menu
    item "Administrator" is highlighted.
  • Confirm with
  • "Administrator" appears.

- Scroll with the 1 or 2 key until the menu item

"Time functions" is highlighted.

- Confirm with

- "true functions" appears.

- Scroll with the 1 or 2 key until the

- menu item "delay time" is highlighted.

- Confirm with

- Enter the administrator code to acquire the authorization for recommending. Where a delay

authorisation for programming. Where a delay time has already been set it must first be up

time has already been set, it must first be run through.

The delout

- The delay time (0-99 minutes) can be set via the keyboard.

- Confirm with

• "Data has been saved"

- Butriis betirals: appears. - Press any key.

- Press any key.

TIMER FUN ...
Time entryDate entryAutom. ST/WTDelay time
1:▲FUNC: <
Delay time[00] min

A firmware update installs the latest software version. Reorganise sorts the database.

ADMIN
User
Timer functions
Programming
Processes
1:▲2:▼FUNC: <

This function is not enabled at present.

PROGRAMMING
DatabaseUpdate
FirmwareUpdate
Restructure
2:▼FUNC: <
  • Please ensure that the batteries are full before updating the firmware.
  • Please copy the new firmware version to a FAT-32 formatted microSD card and insert it
    into the microSD card slot.
  • Switch on the lock using the On key.
    • The press Fund.
    • The "Main menu" appears.
  • Scroll with the 1 or 2 key until the menu
    item "Administrator" is highlighted.
  • Confirm with
  • "Administrator" appears
    • Scroll with the 1 or 2 key until the
    "Programming" menu item is highlighted.
    • Confirm with
    • Programming appears.
  • Scroll with the 1 or 2 key until the menu
    item "Hanswreapade" is highlighted.
    • Confirm with
  • Enter the administrator code to acquire the
    authorisation for programming.
    • The message "Custom current original manufacturer
    Anonware version using Enter" appears.
  • Confirm with . Thereafter there is no
    need to do anything further in the process.
    • The message does not mean power appears. • The message on the display disappears.
    • The message on the display disappears for some time.
  • When the update is complete, the message
    "Finwareruptile completed" appears.

PROGRAMMING

Databaseupdate
Firmwareupdate
Restructure
1:▲2:▼FUNC:
Confirm current original firmware version with Enter
FUNC: M
Firmwareupdate completed
FUNC: <

Reorganisation must be carried out cyclically in order to optimise the user database and restructure the user data records.

  • Switch on the lock using the _0s key.
    • The press func.
    • The "Main menu" appears.
  • Scroll with the 1 or 2 key until the menu
    item "Administrator" is highlighted.
  • Confirm with
  • "Administrator" appears.
  • Scroll with the 1 or 2 key until the
    "Programming" menu Item is highlighted.
  • Confirm with
  • "Programming" appears.
  • Scroll with the 1 or 2 key until the menu
    item "Restricting" is highlighted.
  • Confirm with
  • Enter the administrator code to acquire the authorisation for programming
    the authorisation for programming.
    • restructuring in progress' appears.
PROGRAMMING
Databaseupdate
Firmwareupdate
Restructure
1:▲FUNC: <
Restructuringin progress!

It is possible to store the history on an inserted microSD card or to output it directly on the display.

ADMIN
User
Timer functions
Programming
Processes

The system must be registered for communication within the device. FP-reset removes all fingerprints.

ADMIN
User
Restructure
Processes
Install
1:▲FUNC: <

This function is not enabled at present.

MAIN MENU
Code changeLanguage/SpracheAdministrator ...Info
1:▲FUNC: <
  • Switch on the lock using the key.
  • The press Furl
    • The 'Main menu' appears.
  • Scroll with the 1 or 2 key until the menu
    item "Administrator" is highlighted.
  • Confirm with
    • "Administrator" appears.
  • Scroll with the 1 or 2 key until the menu
    Item "Processes" is highlighted.
  • Confirm with
  • Enter the administrator code to acquire
    the authorisation for programming.
  • Scroll with the 1 or 2 key through the
    data records.
  • Confirm with
Processes
Display
Save
2:▼FUNC: <
#
Administrator
Code entry
1:▲ 2:▼ FUNC:M

In the event of a complete system failure, the electronic control panel may have to be registered again with the locking mechanism.

  • Switch on the lock using the B key.
  • The press Func.
  • The "Main menu" appears.
  • Scroll with the 1 or 2 key until the menu item
    "Administrator" is highlighted.
  • Confirm with
    • "Administrator" appears.
  • Scroll with the 1 or 2 key until the menu item
    "Setup" is highlighted.
  • Confirm with
  • Confirm "install" with
  • Enter the administrator code to acquire the
    authorisation for programming.
  • "Dataset has been stored" appears in the display
  • Press any key.
SETUP
InstallFP ResetGenerate AES-Key
2:▼FUNC: <
Dataset has been stored

In this menu, you can have several pieces of information of the system displayed.

  • Switch on the lock using the on key.
  • The press Func.
    • The "Main menu" appears.
  • Scroll with the 1 or 2 key until the menu
    item "000" is highlighted.
  • Confirm with
  • "info" appears
  • Confirm with On
  • Enter the administrator code to acquire
    the authorisation for programming.
    • The system information is displayed.
  • Scroll with key 1 or 2 to view the information.
  • Use the time key to return.
MAIN MENU
Code changeLanguage/SpracheAdministrator ...Info
1:▲FUNC: <
Info
LE-V1.0
SN:20.0A.00.00
2:▼FUNC: M
  • Please insert a FAT-32 formatted microSD card into the microSD card slot.
  • Switch on the lock using the key.
    • The press 19c.
    • The "Main menu" appears.
  • Scroll with the 1 or 2 key until the menu
    item "Administrator" is highlighted.
  • Confirm with Dr.
    • "Administrator" appears.
  • Scroll with the 1 or 2 key until the menu
    Item "Processes" is highlighted.
  • Confirm with On
    • "Access" appears.
  • Scroll with the 1 or 2 key until the menu
    Item "Say" is highlighted.
  • Confirm with Dr.
  • Enter the administrator code to acquire
    the authorisation for programming.
    • "Please me!" appears.
  • "Dataset has been stored!" appears.
  • Press any key.
Processes
DisplaySave
1:▲FUNC: <
Please wait!
Dataset has been stored!
FUNC: <
  • Switch on the lock using the 0 -key.
  • The press Func.
  • The "Mak men" appears.
  • Scroll with the 1 or 2 key until the menu
    item "Administrator" is highlighted.
  • Confirm with
    • "Administrator" appears.
  • Scroll with the 1 or 2 key until the menu
    item "Setup" is highlighted.
  • Confirm with
  • Scroll with the 1 or 2 key until the menu
    item "FP-Rest" is highlighted.
  • Confirm with
  • Enter the administrator code to acquire
    the authorisation for programming.
    • "Delete data with ENFKey" appears.
  • Confirm with 0m
    • "Please wait" appears.
  • Press any key.
SETUP
InstallFP-ResetGenerate AES-Key
2:▼FUNC: <
Delete data with ENTER key
FUNC: <

Info / system check menu

  • Switch on the lock using the On key.
    • The press
    • The "Mainew" appears.
  • Scroll with the 1 or 2 key until the menu item
    "info" is highlighted.
    • Confirm with
    • "info" appears
  • Scroll with the 1 or 2 key until the menu item
    "Systemcheck" is highlighted.
  • Confirm with
  • Enter the administrator code to acquire the
    authorisation for programming.
    • The system check information is displayed
  • Scroll with key 1 or 2 to view the information.
    • Use the time key to return.
INFO
System infoSystemcheck
1:▲2:▼FUNC: <
8
EE✓ ADC 5.43V✓ Flash✓ touch con..
2:▼FUNC: M

Error messages

The illustration below describes the error messages on the display when a fingerprint is created is or when the safe is opened.

Error message Solution

Too fast! Please repeatMove your finger slowly across the sensor.
Too tilted! Please repeatMove your finger flat across the sensor.
Too short! Please repeatMove your finger across the sensor so that more area of your fingerprint can be read.
Position in the middle and repeat!Position your finger in the middle of the sensor.
Wrong code! Enter a valid code.
No admittance! An unsaved fingerprint has been used. Repeat with a fingerprint that has already been created.

Burg Wächter WS Office 821 E - Error messages - 1

Burg Wächter WS Office 821 E - Error messages - 2

Burg Wächter WS Office 821 E - Error messages - 3

Technical details

Number of administrator codes:1
Number of user codes: 9 (max.)
Number of fingerprint codes:20 (max.)
Blocking times: After an incorrect code/FP is entered 15x, 5 minutes
Power supply: 4x AA MIGNON LR6 ALKALINE
Date/time:√
Updatable (firmware):√
History number: 2,000

Battery replacement

You can see the battery status at any time using the battery level indicator at the top right of the display. If the battery capacity is running low, a corresponding message appears on the display: When this notice appears, change the batteries as soon as possible.

Remove the screw on the underside of the lock electronics. This will require a Torx T B screw-driver. This is included in the scope of delivery.

Let the cover slide out together with the batteries.

Remove the old batteries and dispose of them according to the disposal instructions on page 15. Replace the batteries with four new 1.5 V AA Mignon batteries and according to the correct polarity. For this purpose, illustrations are shown on the battery holder. Please use branded batteries and no rechargeable batteries.

Push the cover and batteries back into the locking electronics and screw them tight.

Burg Wächter WS Office 821 E - Battery replacement - 1

Burg Wächter WS Office 821 E - Battery replacement - 2

Burg Wächter WS Office 821 E - Battery replacement - 3

Burg Wächter WS Office 821 E - Battery replacement - 4

Burg Wächter WS Office 821 E - Battery replacement - 5

Warranty

BURG-WACHTER products comply with the technical standards at the time of production and adhere to our own quality standards. The guarantee only covers defects which can be proved to have resulted from production or material defects at the time of purchase. The warranty ends after two years, further claims are excluded. Defects and damage caused by e.g. transport, incorrect operation, improper use, wear etc. are excluded from the warranty. The batteries are not included in the guarantee. A short description of any defects identified must be made in writing and the device returned to the place it was purchased, together with the original packaging. After the device has been tested, and within a appropriate period of time, the guarantor will decide whether or not to repair or exchange the item.

Attention:

In order to deliver a flawless and high quality product to you and to better assist you in case of service or repair, it is necessary that faulty or defective devices along with the valid administrator code be presented to your dealer together with the original documentation.

For returns, all undamaged device parts must furthermore be in the factory setting due to your right of revocation. Failure to comply with this will invalidate the warranty.

Disposal of the device

Dear customer.

please help us avoid unnecessary waste. Should you intend to dispose of this device at any time, please remember that many components of this device contain valuable materials that can be recycled.

Burg Wächter WS Office 821 E - Disposal of the device - 1

Please be aware that electrical and electronic equipment and batteries marked in this way must not be disposed of with house hold waste but collected separately. Please obtain information on the collecting points for electrical waste from the responsible authority of your city/municipality.

BURG-WÄCHTER KG hereby declares that this device complies with the Directives 2014/30/EU, (EMC) and 2011/65/EU (RoHS).

The complete text of the EU Declaration of Conformity is available at the following Internet address: www.burg.biz

Safety recommendation

Please clean the keyboard operating surface periodically with a microfibre cloth (e.g. glasses cleaning cloth for spectacles) to remove any fingerprints on the keyboard surface.

Printing and typesetting errors as well as technical changes reserved.

tr Mode d'emploi

Montage
Burg Wächter WS Office 821 E - Safety recommendation - 1

text_image BURG WACHTER 1 2345 67890 Dm C D E F G

A Écran

B Touchesnumériques

USER
Create
Assign
Delete
USER.0001 CD
Combination: [FP]
FUNC: M
Program finger
4.
FUNC: <
USER.0003 FPcreated!
FUNC: <
USER
Create Assign Delete
1:▲2:▼FUNC: <
USER
Assign Code Assign Finger
2:▼FUNC: <
USB:1.0001
1:▲2:▼FUNC: M
USER
Create Assign Delete
1:▲ 2:▼ FUNC: <
USER
Assign Code Assign Finger
1:▲FUNC: <
USER.0003 FPcreated!
FUNC: <
TIMER FUN ...
Time entry
Date entry
Autumn. ST/WT
Delay time
1:▲ 2:▼ FUNC: <
Autom. ST/WT[ON]
1:▲FUNC: M
ADMIN
User
Timer functions
Programming
Processes
1:▲ 2:▼ FUNC: <
PROGRAMMING
DatabaseupdateFirmwareupdateRestructure
2:▼FUNC: <
ADMIN
User
Timer functions
Programming
Processes
Dataset has been stored!
FUNC: <
ADMIN
User
Restructure
Processes
Install
1:▲FUNC: <
Dataset has been stored
FUNC: <
Delete data with ENTER key
FUNC: <
Info
UE-V1.0
SNE-20.0A.00.00
2:▼FUNC: M
USER
Create
Assign
Delete
2:▼FUNC: <
USER.0001 CD
Combination: [FP]
FUNC: M
USER
Create Assign Delete
1:▲ 2:▼ FUNC: <
USER
Assign Code Assign Finger
2:▼ FUNC: <
8
USER.0001
1:▲2:▼FUNC: M
USER
Create Assign Delete
1:▲ 2:▼ FUNC: <
USER
Assign Code Assign Finger
3:▲FUNC: <
USER.0003 FPcreated!
FUNC: <
USER
Create Delete
1:▲FUNC: <
USER.0001 CD
1:▲2:▼FUNC: M
Dataset has been deleted!
FUNC: <
ADMIN
UserTimer functionsProgrammingProcesses
1:▲2:▼FUNC: <
20172016
Sales of products and services3,845 3,905
Costs and expenses(1,247)(1,247)
Net sales1,000 1,000
Year Ended December 31,
20182017
(in millions)
Revenues1,4651,394
Costs and expenses(1,058)(1,038)
Net income1,4651,394
Year Ended December 31,
20182017
(in millions)
Revenues1,4651,395
Costs and expenses(1,048)(1,018)
Net income1,4651,395
20172016
Cost of sales3.43.5
Gross profit(1.8)(1.9)
20172016
Cost of sales3.43.5
Gross profit(1.8)(1.9)
Year Ended December 31,
20182017
(in millions)
Revenues1,4651,395
Costs and expenses(1,048)(1,018)
Net income1,4651,395
Year Ended December 31,
20182017
Revenues1,4691,350
Costs and expenses(1,000)(1,000)
Net income1,4691,350
20172016
Cost of sales3.43.5
Gross profit(1.8)(1.9)
20172016
Cost of sales3.43.5
Gross profit(1.8)(1.9)
Year Ended December 31,
20182017
(in millions)
Revenues1,4651,395
Costs and expenses(1,048)(1,018)
Net income1,4651,395
20172016
Cost of sales3.43.5
Gross profit(1.8)(1.9)
Year Ended December 31,
20182017
(in millions)
Revenues1,4651,395
Costs and expenses(1,048)(1,018)
Net income1,4651,395
20172016
Cost of sales3.43.5
Gross profit(1.8)(1.9)
20172016
Cost of sales3.43.5
Gross profit(1.8)(1.9)
Year Ended December 31,
20182017
(in millions)
Revenues1,4651,395
Costs and expenses(1,048)(1,018)
Net income1,4651,395
20172016
Cost of sales3.43.5
Gross profit(1.8)(1.9)
20172016
Cost of sales3.43.5
Gross profit(1.8)(1.9)
Year Ended December 31,
20182017
(in millions)
Revenues1,4651,395
Costs and expenses(1,048)(1,018)
Net income1,4651,395
(in millions)
20172016
Net earnings3,458 3,394
Earnings per share:
(人民币元)0.04 0.04
Weighted average of common stock0.04 0.04
ADMIN
User
Timer functions
Programming
Processes
1:▲2:▼FUNC: <

ase-update

PROGRAMMING
DatabaseupdateFirmwareupdateRestructure
2:▼FUNC: <
Confirm current original firmware version with Enter
本次发行前本公司尚未实施上述事项。

[NO TEXT]

Firmwareupdate complete!
###
FUNC:

PROGRAMMING

Databaseupdate
Firmwareupdate
Restructure
公司名称:华仪电气
1:▲FUNC:

0

Restructuringin progress
ADMIN
User
Timer functions
Programming
Processes
1:▲ 2:▼ FUNC: <
ADMIN
User
Restructure
Processes
Install
1:▲FUNC: <
SETUP
InstallFP ResetGenerate AFS-Key
2:▼FUNC: <
Dataset has been stored
Table of contents Click a title to access it
Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Burg Wächter

Model : WS Office 821 E

Category : Safe