SmartUPS SMTL1500RM3UC - Uninterruptible power supply APC - Free user manual and instructions
Find the device manual for free SmartUPS SMTL1500RM3UC APC in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Rack-mountable Uninterruptible Power Supply (UPS) |
| Brand | APC |
| Model | Smart-UPS SMTL1500RM3UC |
| Apparent Power | 1500 VA |
| Active Power | 1350 W |
| Input Voltage | 120 V |
| Output Voltage | 120 V |
| Waveform | Pure Sine Wave |
| Battery Technology | Lithium-ion |
| Number of Batteries | 4 |
| Dimensions (H x W x D) | 132 x 432 x 470 mm |
| Weight | 22 kg |
| Rack Mounting | Yes, 3U |
| Connectivity | SmartConnect (Ethernet) for remote monitoring |
| Key Features | Surge protection, automatic voltage regulation (AVR), intelligent battery management |
| Maintenance and Cleaning | Minimal maintenance, sealed battery; clean with a dry cloth |
| Safety | Compliant with UN38.3, short-circuit, overload, and deep discharge protection |
| Spare Parts and Repairability | Replacement battery cartridge (ref. 914-0001) |
| General Information | Designed for servers, networks, and critical equipment; 3-year warranty |
Frequently Asked Questions - SmartUPS SMTL1500RM3UC APC
How to install the APC Smart-UPS SMTL1500RM3UC in a rack?
Attach the provided mounting brackets to the sides of the UPS, then slide it into the rack ensuring it is well supported. Use the screws to secure it. Then plug in the power cord and equipment.
What is the battery runtime on this UPS?
The runtime depends on the connected load. For a 500 W load, expect about 10 to 15 minutes. At full load (1350 W), it is approximately 3 to 5 minutes. Consult the PowerChute software for accurate estimates.
How to replace the battery of the APC SMTL1500RM3UC?
The UPS uses a lithium-ion battery cartridge referenced 914-0001. To replace it, disconnect the UPS, remove the front panel, disconnect the cables, remove the old battery and insert the new one respecting polarities. Reconnect and power on.
What does the SmartConnect LED on the UPS mean?
The SmartConnect LED indicates the connection status to the APC cloud service. Solid green means the connection is active. Flashing or orange indicates a network or configuration issue.
Can I connect this UPS to my computer via USB?
No, this model does not have a USB port. It uses SmartConnect via Ethernet for communication. You can install PowerChute software on a server for advanced management.
What is the warranty of the APC Smart-UPS SMTL1500RM3UC?
APC offers a standard 3-year warranty for the UPS and 2 years for the lithium-ion battery. The warranty covers manufacturing defects and failures, but not damage from misuse.
How to test the proper operation of the UPS?
Press the 'Test' button on the front panel. The UPS will switch to battery mode and the test LED will illuminate. If the test fails, check the battery or contact technical support.
What to do in case of a prolonged power outage?
The UPS will provide limited runtime. If the battery discharges, the UPS will shut down automatically. To protect your equipment, configure an automatic shutdown via PowerChute. After power returns, the UPS will recharge.
How to clean the UPS and how often?
Disconnect the UPS before cleaning. Use a soft, dry cloth to remove dust from the casing and ventilation grilles. Avoid liquids. Cleaning every 6 months is recommended.
Where can I buy spare parts for this UPS?
Spare parts, including the battery (ref. 914-0001), are available from authorized APC resellers or on the official website. You can also contact customer service for references.
User questions about SmartUPS SMTL1500RM3UC APC
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uninterruptible power supply in PDF format for free! Find your manual SmartUPS SMTL1500RM3UC - APC and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SmartUPS SMTL1500RM3UC by APC.
USER MANUAL SmartUPS SMTL1500RM3UC APC
1.0 Products covered by this Test Summary
| Model Number | Description | Notes |
| SMTL1000RM2UC | APC Smart-UPS Lithium Ion, Short Depth 1000VA, 120V with SmartConnect | 3 x 914-0001 |
| SMTL1000RMI2U | APC Smart-UPS Lithium Ion, Short Depth 1000VA, 230V | 3 x 914-0001 |
| SMTL1000RMI2UC | APC Smart-UPS Lithium Ion, Short Depth 1000VA, 230V with SmartConnect | 3 x 914-0001 |
| SMTL1000RMI2UNC | APC Smart-UPS Lithium Ion, Short Depth 1000VA, 230V with Network Card | 3 x 914-0001 |
| SMTL1500RM3UC | APC Smart-UPS Lithium Ion, Short Depth 1500VA, 120V with SmartConnect | 4 x 914-0001 |
| SMTL1500RMI3U | APC Smart-UPS Lithium Ion, Short Depth 1500VA, 230V | 4 x 914-0001 |
| SMTL1500RMI3UC | APC Smart-UPS Lithium Ion, Short Depth 1500VA, 230V with SmartConnect | 4 x 914-0001 |
| SMTL1500RMI3UNC | APC Smart-UPS Lithium Ion, Short Depth 1500VA, 230V with Network Card | 4 x 914-0001 |
| SMTL1K5R3CX180 | APC SMART-UPS Li-ion Short Depth 1500VA 120V With SmartConnect and NMC | 4 x 914-0001 |
| SMTL750RM2UC | APC Smart-UPS Lithium Ion, Short Depth 750VA, 120V with SmartConnect | 2 x 914-0001 |
| SMTL750RMI2U | APC Smart-UPS Lithium Ion, Short Depth 750VA, 230V | 2 x 914-0001 |
| SMTL750RMI2UC | APC Smart-UPS Lithium Ion, Short Depth 750VA, 230V with SmartConnect | 2 x 914-0001 |
| SMTL750RMI2UNC | APC Smart-UPS Lithium Ion, Short Depth 750VA, 230V with Network Card | 2 x 914-0001 |
Physical Description of Products
Each product consists of an Uninterruptible Power Supply (UPS) that contains two or more lithium ion batteries (914-0001). Each lithium ion battery is less than 100 WH and contains individual cells that are each less than 10 WH.
1.1 Batteries in Products
| # | Model Number | Description | Notes |
| 1 | ALM000008-01,PSL000005,914-0001 | 12V, 5 AH LI-ION EMULATOR | |
| 2 | ZE18017,914-0001 | 12V, 5 AH LI-ION EMULATOR |
1.2 Cells in Batteries
| # | Model Number | Description | Notes |
| 3 | ANR26650M1-B | 3.3 Volts, 2.5 Ah Cylindrical Battery,LithiumWerks Nanophosphate | In 2018 LithiumWerks assumed the right to make A123 Batteries |
| 4 | 26650 P FS | Lithium ion Rechargeable cell, 3000 mAH,LiFePO4 series cathode |
2.0 Manufacturers of Cells/Batteries
2.1 Battery Maker #1
| Name | Address | Phone | Website |
| NEC Energy Solutions (AsteelFlash Suzhou Ltd) | No.8 Gutang Road, Wetdz, Wujiang District, Suzhou, JIANGSU 215200 | +86 512 6340 8000 | https://www.asteelflash.com/facility/asteelflash-suzhou/ |
| NOTES: | |||
2.1 Battery Maker #2
| Name | Address | Phone | Website |
| Shenzhen Ace Battery Co. Ltd. | 5^th Floor, No. 2 Lanjing Middle Road, Oongtian Street, Pingshan District, Shenzhen, Guandong, China | +86 755 8328 3710 | Email:info@cbakbattery.comNo Website |
| NOTES: | |||
2.1 Cell Maker #3
| Name | Address | Phone | Website |
| LithiumWerks | 18#, BeiHai Road, CZEPE Changzhou New District Jiangzu, PRC, 213031 | +1 512 527-2900 (U.S. Office) | https://lithiumwerks.com/ |
| NOTES: | |||
2.1 Cell Maker #4
| Name | Address | Phone | Website |
| DALIAN CBAKPOWERBATTERY COMPANYLIMITED | 11 Meigui Street (East),Huayuankou Economic Zone,Dalian, China, 116450 | 0411-39185999 | http://www.cbak.com.cn/ |
| NOTES: | |||
3.0 Test Laboratories of Cells / Batteries
3.1 Test for Battery #1
| Name | Address | Phone | Website | |
| Shanghai Research Institute of Chemical Industry Testing Co. Ltd. | East Yunling Road No. 345Building A Room 717,SHANGHAI, CHINA | +021 5281 53770102 | http://www.sricims.com/ | |
| Test ID No: | 1115120 333 | |||
| Date: | December 29, 2015 | |||
| NOTES: | ||||
| Lithium Ion Cell | |
| XXX | Lithium Ion Battery |
| Lithium Metal Cell | |
| Lithium Metal Battery |
3.1 Test for Battery #2
| Name | Address | Phone | Website | |
| GUANGDONG UTL CO., LTD. | Lianding Testing Building, No.18 Center Road of Yayuan Industrial Zone, Nancheng District, Dongguan, Guangdong, China | +86-769-3893 3228 | E-mail: sales@gdutl.com Website: http://www.gdutl.com | |
| Test ID No: | 19PNS050009 03001 | |||
| Date: | July 22, 2019 | |||
| NOTES: | ||||
| Lithium Ion Cell | |
| XXX | Lithium Ion Battery |
| Lithium Metal Cell | |
| Lithium Metal Battery |
3.1 Test for Battery #3
| Name | Address | Phone | Website | |
| Shanghai Research Institute of Chemical Industry Testing Co. Ltd. | East Yunling Road No. 345Building A Room 717,SHANGHAI, CHINA | +021 5281 53770102 | http://www.sricims.com/ | |
| Test ID No: | 1118070067 | |||
Date: August 8, 2018
NOTES: Retest of battery cell after change of ownership of battery maker.
| XXX | Lithium Ion Cell |
| Lithium Ion Battery |
| Lithium Metal Cell | |
| Lithium Metal Battery |
4.0 Parameters of Cells/Batteries
4.1 Test for Battery #1
| Parameters | Cell | Battery |
| Mass in gram (g) | 76 | 932 |
| Lithium ion Indicate watt-hour rating (Wh) | 0.73 | 66 |
| Lithium metal Indicate lithium metal content in gram (g) | N/A | N/A |
Physical Description of Cells / Batteries
914-0001 and Cell:
4.1 Test for Battery #2
| Parameters | Cell | Battery |
| Mass in gram (g) | 99.1 | 949 |
| Lithium ion Indicate watt-hour rating (Wh) | 3.0 | 76.8 |
| Lithium metal Indicate lithium metal content in gram (g) | N/A | N/A |
Physical Description of Cells / Batteries
914-0001 and Cell:
natural_image
Two battery components: a black battery with red label and a blue cylindrical battery on a ruler for scale (no visible text or symbols)5.0 List of tests conducted and results
| Test | Pass | Fail | N/A |
| T1 – Altitude simulation | X | ||
| T2 – Thermal Tests | X | ||
| T3 – Vibration | X | ||
| T4 – Shock | X | ||
| T5 – External Short Circuit | X | ||
| T6 – Impact - for cylindrical cells having a diameter of at least 18mm. See Section 6.0 | X | ||
| T6 – Crush - for prismatic cells, pouch cells, button cells and cylindrical cells having a diameter of less than 18mm. See Section 6.0 | X | ||
| T7 – Overcharge | X | ||
| T8 – Forced Discharge | X |
6.0 UN38.3 Test Conformation for the Cells inside the battery:
| Cell UN 38.3 Test Confirmed (Yes or No) | |
| When no separate document for the cells is provided, this confirms that the cells inside the battery have successfully passed the UN 38.3 test. In this case under section 5.0 the T6 and T8 must be marked as “passed” and here under section 6.0 “Cell UN 38.3 Test confirmed” needs to be Yes. | YES |
7.0 Reference to assembled battery testing requirements
| Not Applicable | |
| XXX |
8.0 Reference to the edition on the Manual of Tests and Criteria applied
ST/SG/AC.10/11/Rev.5/Amend.1
Recommendations on the Transport of Dangerous Goods:
Manual of Tests and Criteria, Part III, Sub-Section 38.3
Lithium metal and lithium ion batteries
United Nations
9.0 Manufacture of the cell / battery is in accordance with quality management system as required by the regulations:
Schneider Electric certifies that all articles described in this Test Survey are in compliance with all applicable Schneider Electric Product Specifications, Manufacturing Processes, Quality Control Testing, Quality Plan per ISO9001: 2008, and Environmental guidelines.
10.0 Certification
Company: Schneider Electric – Secure Power Division Signature:
Authorized representative:
Raymond P. Lizotte, Jr.
Director, Sustainability Office
EMAIL: raymond.lizotte@SE.com
Date of compilation: February 20, 2020
Place of expertise: Schneider Electric Andover R&D Center
Andover, MA 01810
United States