F4WV708P2BA - Washing machine LG - Free user manual and instructions

Product type	Front-loading washing machine
Brand	LG
Model	F4WV708P2BA
Washing capacity	8 kg
Maximum spin speed	1400 rpm
Dimensions (H×W×D)	850 × 600 × 550 mm
Net weight	70 kg
Power supply	220-240 V~, 50 Hz
Required water pressure	50 - 800 kPa
Wash programs	Cotton, Eco 40-60, TurboWash 39, Mix, Synthetics, Ultra silent, Allergy care, Delicate, Hand/Wool, Sports wear, Quick 14, Duvet, Drum clean, Downloaded program
Special options	Steam, TurboWash, Pre-wash, Intensive, Extra rinse, Delay finish, Add laundry
Smart functions	Wi-Fi, LG ThinQ, Remote start, Smart diagnosis
Safety	Child lock, door safety, leak prevention
Noise level (wash/spin)	Approx 54/74 dB(A)
Energy consumption (Eco 40-60 cycle)	0.839 kWh (full load)
Water consumption (Eco 40-60 cycle)	70 L (full load)
Maintenance and cleaning	Drum clean, pump filter, water inlet filter, detergent drawer
Availability of spare parts	Minimum 10 years after end of marketing
Energy class (EU 2019/2014)	A (scale A to G)

Frequently Asked Questions - F4WV708P2BA LG

How to install the LG F4WV708P2BA washing machine?

Remove the transport bolts at the back using the provided wrench, then level the appliance by adjusting the feet. Connect the water inlet hose to the tap (pressure between 50 and 800 kPa) and the drain hose to a drain located less than 100 cm from the floor. Plug the appliance into a grounded outlet.

How to use the Eco 40-60 program?

Select the Eco 40-60 program to wash normally soiled cotton laundry declared washable at 40°C or 60°C. This cycle is optimized for energy efficiency and allows handling different loads. Load up to 8 kg and add detergent as per instructions.

What to do if error code IE appears?

The IE code indicates a water supply problem. Check that the tap is open, the inlet hose is not kinked, and the inlet filter is not blocked. If the Aqua Stop hose is damaged (red indicator), replace it.

How to activate child lock?

Press the Delay finish and Add laundry buttons simultaneously for 3 seconds. CL appears on the screen. To deactivate, repeat the same operation.

How to clean the drain pump filter?

Unplug the appliance and open the hatch at the bottom right. Pull out the drain hose, remove the cap, and drain the water. Then unscrew the filter, clean it under running water, and reassemble. Perform this operation every 6 months.

Can laundry be added during a cycle?

Yes, thanks to the Add laundry function. Press the corresponding button after starting, wait for the door to unlock (the lock icon disappears), open, add or remove laundry, close, and press Start/Pause. Note: the door remains locked if the temperature or water level is high.

How to use the TurboWash 39 function?

Select the TurboWash 39 program (max load 5 kg). Press the TurboWash button to activate the option. This program washes a half load of lightly soiled clothes in about 39 minutes thanks to 4 water jets.

What to do if the appliance vibrates or makes noise?

Check that the transport bolts have been removed and that the appliance is level. Make sure the load is balanced (mix of small and large items). If the noise persists, clean the drain filter and check that no foreign objects are in the drum.

How to connect the appliance to the LG ThinQ app?

Download the LG ThinQ app on your smartphone. Turn on the appliance, then press and hold the Wi-Fi button (or Delay finish for 3 seconds) until the Wi-Fi indicator blinks. Follow the instructions in the app to connect your appliance to your 2.4 GHz Wi-Fi network.

What detergent to use and how much?

Use a detergent suitable for front-loading washing machines. Follow the detergent manufacturer's recommendations based on load: full load (100%), half load (1/2), minimum load (1/3). For liquid detergents, pour directly into the main dispenser only if you start immediately; avoid for Delay finish or Pre-wash function.

USER MANUAL F4WV708P2BA LG

Pure geometric lines and shapes without any text, numbers, or symbols

Pure geometric diagram with intersecting lines and shapes, no text or symbols present

Pure geometric lines and shapes without any text, numbers, or symbols

Pure geometric diagram with intersecting lines and shapes, no text or symbols present

Pure geometric lines and shapes without any text, numbers, or symbols

Pure geometric diagram with intersecting lines and shapes, no text or symbols present

Pure geometric lines and shapes without any text, numbers, or symbols

Pure geometric diagram with intersecting lines and shapes, no text or symbols present

Pure geometric lines and crosshair symbols without any text or labels

Pure geometric diagram with intersecting lines and shapes, no text or symbols present

Pure geometric lines and shapes without any text, numbers, or symbols

Pure geometric diagram with intersecting lines and shapes, no text or symbols present

Pure geometric lines and crosshair symbols without any text or labels

Pure geometric diagram with intersecting lines and shapes, no text or symbols present

Technical diagram of a mechanical device with numbered components and an inset close-up view labeled 6-7.

Technical diagram of a mechanical or electrical component with labeled parts 1, 2, and 3

Pure geometric lines and crosshair symbols without any text or labels

Pure geometric diagram with intersecting lines and shapes, no text or symbols present

Zubehör

Pure electrical circuit lines without any symbols

de_main.book.book Page 14 Monday, September 27, 2021 3:00 PM

Pure geometric diagram with intersecting lines and circles, no text or symbols present

14 AUFSTELLEN

Abmessungen(mm)

W H D'' D' D

W 600	D 565 D" 1100
H	8	5	0	D	' 6

2

Pure geometric lines and crosshair symbols without any text or labels

Pure geometric diagram with intersecting lines and shapes, no text or symbols present

Cross-sectional diagram of a rectangular frame with hatched sides and dimension line labeled A (no text or symbols beyond label)

B C C

DEUTSCH

Index Abstand (mm)
A	100
B	5
C	20

WARNUNG

Technical illustration of two mechanical components: a circular component with internal grooves and a hexagonal bolt (no text or symbols)

Diagram showing a device component with labeled parts and directional arrows indicating movement or assembly.

Pure geometric lines and shapes without any text, numbers, or symbols

Pure geometric diagram with intersecting lines and shapes, no text or symbols present

Technical diagram showing a wrench interacting with a mechanical component, with an inset close-up highlighting the mechanism.

Diagram illustrating a mechanical or fluid system with labeled components and directional arrows, including a magnified inset showing a circular component.

HINWEIS

Pure geometric lines and crosshair symbols without any text or labels

Pure geometric diagram with intersecting lines and shapes, no text or symbols present

18 AUFSTELLEN

HINWEIS

Technical diagram illustrating mechanical assembly steps with labeled components and directional arrows indicating motion.

HINWEIS

Line drawing of a washing machine with control panel and door (no text or symbols)

Diagram illustrating a mechanical assembly with labeled components and directional arrows indicating motion or force.

Illustration of a hand holding a card with a triangular ruler and a numbered marker (1), no text or symbols present.

Pure geometric lines and shapes without any text, numbers, or symbols

Pure geometric diagram with intersecting lines and shapes, no text or symbols present

20 AUFSTELLEN

Technical diagram showing two mechanical or fluidic components connected by a pipe fitting, with labeled connection point 1.

Technical diagram showing mechanical assembly with labeled component 1 and connection point

Diagram of a faucet with a valve inserted into a pipe fitting (no text or symbols)

HINWEIS

Illustration showing a hand using a tool to measure eye area, with magnified inset (no text or symbols)

≤145 cm ≤100 cm ≤100 cm ≤105 cm

100 cm VI 100 cm VI

Line drawing of a kitchen sink with faucet and plate (no text or symbols)

Pure geometric lines and shapes without any text, numbers, or symbols

Pure geometric diagram with intersecting lines and shapes, no text or symbols present

22 BETRIEB

BETRIEB

Diagram of a washing machine with a circular dial and handle, showing internal components and a checkmark indicating action (no text or symbols present)

Line drawing of a hand holding a tool over a curved surface with motion lines (no text or symbols)

Simple line drawing of a hand pressing on a button with a play button icon (no text or symbols)

Simple circular diagram with two curved arrows indicating rotational or bidirectional motion (no text or symbols)

Pure geometric lines and shapes without any text, numbers, or symbols

Pure geometric diagram with intersecting lines and shapes, no text or symbols present

24 BETRIEB

Bedienfeld

Pure geometric lines and shapes without any text, numbers, or symbols

Pure geometric diagram with intersecting lines and shapes, no text or symbols present

Pure geometric lines and shapes without any text, numbers, or symbols

Pure geometric diagram with intersecting lines and shapes, no text or symbols present

Diagram illustrating the process of clothing turnover, showing steps from pocket to edge with corresponding icons for key, pen, and card.

Pure geometric diagram with intersecting lines and shapes, no text or symbols present

28 BETRIEB

Technical diagram of a sewing machine with numbered parts labeled 1, 2, and 3

Pure geometric lines and shapes without any text, numbers, or symbols

Pure geometric diagram with intersecting lines and shapes, no text or symbols present

30 BETRIEB

Programmtabelle

Waschprogramm

Pure geometric lines and shapes without any text, numbers, or symbols

Pure geometric diagram with intersecting lines and shapes, no text or symbols present

Pure geometric lines and symbols without any text, numbers, or labels

Pure geometric lines and shapes without any text, numbers, or symbols

Pure geometric lines and symbols without any text, numbers, or labels

Pure electrical circuit lines without any symbols

34 BETRIEB

Programm	kg	h:mm	kWh	°C	Litern	U/Min.	%
Kurz 14	20:14	0,051 21 41	0 400 106,0
Koch-/Buntwäsche + Intensiv	10,5 4:26	0,806 30	102,0 1350 50,0
Eco 40-60 (Voll)* ^1	10,5 4:00	0,839 36	70,0 1360 43,2
Eco 40-60 (Halb)* ^1	5,25 3:00	0,570 31	53,0 1360 41,9
Eco 40-60 (Viertel)* ^1	2,5 2:25	0,310 26 43	0 1360 46,6

Modell: F4WV709P2BA / F4WV709P1E

Programm	kg	h:mm	kWh	°C	Litern	U/Min.	%
Koch-/Buntwäsche 20 °C	9 2:59	0,298 26 69	0 1350 50,0
Koch-/Buntwäsche 60 °C	9 3:59	1,553 48 70	0 1350 50,0
Mix	4 1:21	0,603 35 54	0 1000 67,0
Kurz 14	2 0:14	0,051 21 41	0 400 106,0
Koch-/Buntwäsche + Intensiv	9 4:26	0,805 31 95	0 1350 50,0
Eco 40-60 (Voll)*1	9 3:48	0,755 35 61	0 1360 44,8
Eco 40-60 (Halb)*1	4,5 2:45	0,460 29 46	0 1360 41,4
Eco 40-60 (Viertel)*1	2,5 2:25	0,295 27 42	0 1360 46,0

Modell: F4WV708P2BA / F4WV708P1E / F4WV708P1R

Programm	kg	h:mm	kWh	°C	Litern	U/Min.	%
Koch-/Buntwäsche 20 °C	8 2:59	0,196 26 61	0 1350 50,0
Koch-/Buntwäsche 60 °C	8 3:59	1,552 52 61	0 1350 50,0
Mix	4 1:21	0,603 35 54	0 1000 67,0
Kurz 14	2 0:14	0,051 21 54	0 400 106,0
Koch-/Buntwäsche + Intensiv	8 4:26	0,804 33 80	0 1350 50,0
Eco 40-60 (Voll)*1	8 3:38	0,750 32 64	0 1360 44,9

Pure geometric lines and crosshair symbols without any text or labels

Pure electrical circuit lines without any symbols

Programm	kg	h:mm	kWh	°C	Litern	U/Min.	%
Eco 40-60 (Halb)*1	4 2:35	0,360 25 40	0 1360 43,7
Eco 40-60 (Viertel)*1	2 1:50	0,260 27 36	0 1360 44,6

Pure geometric lines and crosshair symbols without any text or labels

Pure geometric diagram with intersecting lines and shapes, no text or symbols present

36 BETRIEB

Pure geometric lines and crosshair symbols without any text or labels

Pure geometric diagram with intersecting lines and shapes, no text or symbols present

38 BETRIEB

HINWEIS

Pure geometric lines and crosshair symbols without any text or labels

Pure geometric diagram with intersecting lines and shapes, no text or symbols present

INTELLIGENTE FUNKTIONEN

LG ThinQ-App

Pure geometric lines and shapes without any text, numbers, or symbols

Pure geometric diagram with intersecting lines and shapes, no text or symbols present

40 INTELLIGENTE FUNKTIONEN

Diagram showing hand finger pressing up and down arrows, indicating press or navigation process

Diagram showing a hand interacting with a Wi-Fi icon to interact with a Wi-Fi symbol, indicating wireless signal interaction.

Pure geometric lines and shapes without any text, numbers, or symbols

Pure geometric diagram with intersecting lines and shapes, no text or symbols present

INTELLIGENTE FUNKTIONEN

Illustration of hands cleaning a circular object with arrows indicating direction (no text or symbols)

⚠️ WARNING

Diagram of a pipe valve with a rotating knob, showing airflow direction (no text or symbols)

Pure geometric lines and crosshair symbols without any text or labels

Pure geometric diagram with intersecting lines and shapes, no text or symbols present

Diagram illustrating the process of a mechanical tool with labeled parts and directional arrows indicating movement.

Diagram illustrating food preparation steps: adding a pulley to a bowl, adding 30g weights to a bowl, and adding 1g weights to a bowl.

Illustration of a hand holding a folder with a tool, showing a curved arrow indicating rotation (no text or symbols present)

Pure electrical circuit lines without any symbols

Pure geometric diagram with intersecting lines and circles, no text or symbols present

46 WARTUNG

Pure geometric lines and shapes without any text, numbers, or symbols

Pure geometric diagram with intersecting lines and shapes, no text or symbols present

FEHLERBEHEBUNG

Pure geometric lines and shapes without any text, numbers, or symbols

Pure geometric diagram with intersecting lines and shapes, no text or symbols present

48 FEHLERBEHEBUNG

Pure geometric lines and shapes without any text, numbers, or symbols

Pure geometric diagram with intersecting lines and shapes, no text or symbols present

50 FEHLERBEHEBUNG

Betrieb

Pure geometric lines and shapes without any text, numbers, or symbols

Pure geometric diagram with intersecting lines and shapes, no text or symbols present

Pure geometric lines and shapes without any text, numbers, or symbols

Pure geometric diagram with intersecting lines and shapes, no text or symbols present

54 FEHLERBEHEBUNG

Geruch

Pure geometric lines and shapes without any text, numbers, or symbols

Pure geometric diagram with intersecting lines and shapes, no text or symbols present

Pure geometric lines and crosshair symbols without any text or labels

Pure geometric diagram with intersecting lines and shapes, no text or symbols present

Anmerkung

MANUEL DU PROPRIÉTAIRE

LAVE-LINGE

Smart Diagnosis (Diagnostic intelligent)....41

MAINTENANCE

Pure geometric lines and crosshair symbols without any text or labels

Pure geometric diagram with intersecting lines and shapes, no text or symbols present

CONSIGNES DE SÉCURITÉ

LISEZ TOUTES LES INSTRUCTIONS AVANT UTILISATION

Pure geometric lines and shapes without any text, numbers, or symbols

Pure geometric diagram with intersecting lines and shapes, no text or symbols present

6 CONSIGNES DE SÉCURITÉ

Pure geometric lines and crosshair symbols without any text or labels

Pure geometric diagram with intersecting lines and shapes, no text or symbols present

CONSIGNES DE SÉCURITÉ

7

Pure geometric lines and crosshair symbols without any text or labels

Pure geometric diagram with intersecting lines and shapes, no text or symbols present

8 CONSIGNES DE SÉCURITÉ

Pure geometric lines and shapes without any text, numbers, or symbols

Pure geometric diagram with intersecting lines and shapes, no text or symbols present

CONSIGNES DE SÉCURITÉ

9

Pure geometric lines and circular shapes without any text, numbers, or symbols

Pure geometric diagram with intersecting lines and shapes, no text or symbols present

10 CONSIGNES DE SÉCURITÉ

Technical diagram of a mechanical device with numbered components and an inset close-up view labeled 6-7.

Technical diagram of a mechanical or electrical component with labeled parts 1, 2, and 3

Pure geometric lines and crosshair symbols without any text or labels

Pure geometric diagram with intersecting lines and shapes, no text or symbols present

12 INSTALLATION

Accessoires

Pure electrical circuit lines without any symbols

fr_main.book.book Page 13 Monday, September 27, 2021 4:00 PM

INSTALLATION

13

Dimensions (mm)

W H D'' D' D

W 600	D 565 D" 1100
H	8	5	0	D	' 6

FRANÇAIS

2

Pure geometric lines and crosshair symbols without any text or labels

Pure geometric diagram with intersecting lines and shapes, no text or symbols present

14 INSTALLATION

Pure technical diagram of a rectangular frame with hatched sides and dimension arrows, no text or symbols present.

A

Cross-sectional diagram of a washing machine with circular vent and side arm, enclosed in a hatched border (no text or symbols)

|||
C
||
C

Index Dégagement (mm)
A	100
B	5
C	20

AVERTISSEMENT

Technical illustration of two mechanical components: a circular component with a pin and a hexagonal bolt (no text or symbols)

Diagram showing a device component with labeled parts and directional arrows indicating movement or assembly.

Pure geometric lines and shapes without any text, numbers, or symbols

Pure geometric diagram with intersecting lines and shapes, no text or symbols present

16 INSTALLATION

Technical diagram showing a pipe wrench inside a housing with directional arrows indicating rotation and movement, alongside a close-up of the component.

Diagram illustrating a mechanical or fluid system with labeled components and directional arrows, including a magnified inset showing a circular component.

REMARQUE

Technical diagram illustrating mechanical assembly steps with labeled components and directional arrows

REMARQUE

Line drawing of a washing machine with a top-mounted control panel and labeled component (no text or symbols)

Diagram illustrating a mechanical assembly with labeled parts and directional arrows indicating motion or force

FRANÇAIS

Illustration of a hand holding a card with a triangular ruler and a numbered label (1), no text or symbols present.

Technical diagram showing two mechanical assembly steps with labeled component 1

Diagram showing a mechanical assembly with labeled component 1, likely illustrating a valve or pump mechanism.

Diagram of a faucet with a valve inserted into a pipe fitting (no text or symbols)

REMARQUE

Illustration showing a hand using a device to inspect a small object, with magnified detail view (no text or symbols)

Pure geometric lines and shapes without any text, numbers, or symbols

Pure geometric diagram with intersecting lines and shapes, no text or symbols present

Pure electrical circuit lines without any symbols

Pure geometric diagram with intersecting lines and circles, no text or symbols present

20 INSTALLATION

≤ 145 cm ≤ 100 cm ≤ 100 cm ≤ 105 cm

100 cm VI 100 cm VI

Line drawing of a kitchen sink with faucet and plate (no text or symbols)

Pure geometric lines and shapes without any text, numbers, or symbols

Pure geometric diagram with intersecting lines and shapes, no text or symbols present

UTILISATION

Diagram of a washing machine with a circular vent and attached bracket, showing internal components (no text or symbols)

3 Fermer la porte.

ATTENTION

Line drawing of a hand holding a small mechanical component, with no visible text or symbols

Line drawing of a refrigerator interior with labeled compartments (no text or symbols)

Hand pressing a button with an icon for playback (no text or symbols)

Pure geometric lines and shapes without any text, numbers, or symbols

Pure geometric diagram with intersecting lines and shapes, no text or symbols present

Pure electrical circuit lines without any symbols

Pure geometric diagram with intersecting lines and circles, no text or symbols present

22 UTILISATION

Diagram of a circular mechanical component with two curved arrows indicating rotational or bidirectional motion (no text or symbols)

7 Commencez programme.

Pure geometric lines and crosshair symbols without any text or labels

Pure geometric diagram with intersecting lines and shapes, no text or symbols present

Panneau de commande

Pure geometric lines and shapes without any text, numbers, or symbols

Pure geometric diagram with intersecting lines and shapes, no text or symbols present

24 UTILISATION

Pure geometric lines and shapes without any text, numbers, or symbols

Pure geometric lines and shapes without any text, numbers, or symbols

Pure geometric lines and shapes without any text, numbers, or symbols

Pure geometric diagram with intersecting lines and shapes, no text or symbols present

26 UTILISATION

Diagram illustrating the process of clothing turnover with labeled parts including key, pen, and envelope.

Pure geometric lines and shapes without any text, numbers, or symbols

Pure geometric diagram with intersecting lines and shapes, no text or symbols present

Technical diagram of a device interior with numbered labels pointing to key components

Pure geometric lines and shapes without any text, numbers, or symbols

Pure electrical circuit lines without any symbols

28 UTILISATION

Pure geometric lines and shapes without any text, numbers, or symbols

Pure geometric diagram with intersecting lines and shapes, no text or symbols present

Pure geometric lines and shapes without any text, numbers, or symbols

Pure geometric diagram with intersecting lines and shapes, no text or symbols present

30 UTILISATION

Pure geometric lines and shapes without any text, numbers, or symbols

Pure geometric diagram with intersecting lines and shapes, no text or symbols present

Pure geometric lines and shapes without any text, numbers, or symbols

Pure geometric diagram with intersecting lines and shapes, no text or symbols present

32 UTILISATION

Pure geometric lines and shapes without any text, numbers, or symbols

Pure geometric diagram with intersecting lines and shapes, no text or symbols present

34 UTILISATION

Programme	kg	h:mm	kWh	°C	Litres	tr/min	%
Koch-/Buntwäsche (Coton) 60 °C	8 3:59	1,552 52 61	0 1350 50,0
Mix (Mix 40°C)	4 1:21	0,603 35 54	0 1000 67,0
Kurz 14 (Rapide 14)	2 0:14	0,051 21 54	0 400 106,0
Koch-/Buntwäsche (Coton) + Intensiv (Intensif)	8 4:26	0,804 33 80	0 1350 50,0
Eco 40-60 (Pleine)*1	8 3:38	0,750 32 64	0 1360 44,9
Eco 40-60 (Moitié)*1	4 2:35	0,360 25 40	0 1360 43,7
Eco 40-60 (Quart)*1	2 1:50	0,260 27 36	0 1360 44,6

Pure geometric lines and shapes without any text, numbers, or symbols

Pure geometric diagram with intersecting lines and shapes, no text or symbols present

Pure geometric lines and crosshair symbols without any text or labels

Pure geometric diagram with intersecting lines and shapes, no text or symbols present

36 UTILISATION

Dampf (Vapeur)

Ton An/Aus (Son On/Off)

Pure geometric lines and shapes without any text, numbers, or symbols

Pure geometric diagram with intersecting lines and shapes, no text or symbols present

38 FONCTIONS SMART

FONCTIONS SMART

Application LG ThinQ

Smart Diagnosis (Diagnostic intelligent)

Diagram showing hand finger pressing up and down arrows, indicating press or navigation process

Diagram showing a hand interacting with a Wi-Fi icon to interact with a Wi-Fi symbol, indicating wireless signal interaction.

Pure electrical circuit lines without any symbols

Pure geometric diagram with intersecting lines and shapes, no text or symbols present

40 FONCTIONS SMART

Smart Diagnosis (Diagnostic intelligent)

Illustration of hands cleaning a circular object with arrows indicating direction (no text or symbols)

Diagram of a valve mechanism with rotating arrow (no text or symbols)

Pure geometric lines and crosshair symbols without any text or labels

Pure geometric diagram with intersecting lines and shapes, no text or symbols present

44 MAINTENANCE

Illustration of mechanical components including a spool, pliers, and a tool (no text or symbols)

Illustration of a hand holding a folder with a scroll, showing a rotation arrow (no text or symbols)

Diagram illustrating food preparation steps with labeled components and a magnified view of raw food items.

Pure geometric lines and crosshair symbols without any text or labels

Pure geometric diagram with intersecting lines and shapes, no text or symbols present

Pure geometric lines and shapes without any text, numbers, or symbols

Pure geometric diagram with intersecting lines and shapes, no text or symbols present

46 DÉPANNAGE

DÉPANNAGE

Pure geometric lines and shapes without any text, numbers, or symbols

Pure geometric diagram with intersecting lines and shapes, no text or symbols present

Pure geometric lines and shapes without any text, numbers, or symbols

Pure geometric diagram with intersecting lines and shapes, no text or symbols present

Utilisation

Pure geometric lines and shapes without any text, numbers, or symbols

Pure geometric diagram with intersecting lines and shapes, no text or symbols present

50 DÉPANNAGE

Pure geometric lines and crosshair symbols without any text or labels

Pure geometric diagram with intersecting lines and shapes, no text or symbols present

Wi-Fi

fr_main.book.book Page 54 Monday. September 27, 2021 4:00 PM Note

MANUALE D'USO

LAVATRICE

Smart Diagnosis ....40

MANUTENZIONE

Pure geometric lines and shapes without any text, numbers, or symbols

Pure geometric diagram with intersecting lines and shapes, no text or symbols present

ISTRUZIONI PER LA SICUREZZA

LEGGERE TUTTE LE ISTRUZIONI PRIMA DELL'USO

Pure geometric lines and circular shapes without any text, numbers, or symbols

Pure geometric diagram with intersecting lines and shapes, no text or symbols present

6 ISTRUZIONI PER LA SICUREZZA

Pure geometric lines and crosshair symbols without any text or labels

Pure geometric diagram with intersecting lines and circles, no text or symbols present

Pure geometric diagram with intersecting lines and shapes, no text or symbols present

ISTRUZIONI PER LA SICUREZZA

7

Pure geometric lines and shapes without any text, numbers, or symbols

Pure geometric diagram with intersecting lines and shapes, no text or symbols present

8 ISTRUZIONI PER LA SICUREZZA

Pure geometric lines and crosshair symbols without any text or labels

Pure geometric diagram with intersecting lines and shapes, no text or symbols present

ISTRUZIONI PER LA SICUREZZA

9

Detersivo

Pure geometric lines and circular shapes without any text, numbers, or symbols

Pure geometric diagram with intersecting lines and shapes, no text or symbols present

10 ISTRUZIONI PER LA SICUREZZA

Pure geometric lines and crosshair symbols without any text or labels

Pure geometric diagram with intersecting lines and shapes, no text or symbols present

INSTALLAZIONE

Parti e specifiche

NOTA

Technical diagram of a mechanical device with numbered components and an inset close-up view

Technical diagram of a mechanical or electrical component with labeled parts 1, 2, and 3

Pure geometric lines and shapes without any text, numbers, or symbols

Pure geometric diagram with intersecting lines and shapes, no text or symbols present

12 INSTALLAZIONE

Accessori

Pure geometric lines and shapes without any text, numbers, or symbols

Pure geometric diagram with intersecting lines and shapes, no text or symbols present

Pure electrical circuit lines without any symbols

it_main.book.book Page 13 Monday, September 27, 2021 3:49 PM

INSTALLAZIONE 13

Pure geometric diagram with intersecting lines and circles, no text or symbols present

W 600	D 565 D" 1100
H	8	5	0	D	' 6

ITALIANO

Pure geometric lines and shapes without any text, numbers, or symbols

Pure geometric diagram with intersecting lines and shapes, no text or symbols present

14 INSTALLAZIONE

Pure technical diagram of a rectangular frame with hatched sides and dimension arrows (no text or symbols)

A

Technical diagram of a mechanical component with labeled dimension B and internal circular feature

C
C

Technical illustration of two mechanical components: a circular component with internal grooves and a hexagonal bolt (no text or symbols)

Diagram showing a device component with labeled parts and directional arrows indicating movement or assembly.

Pure geometric lines and crosshair symbols without any text or labels

Pure geometric diagram with intersecting lines and shapes, no text or symbols present

16 INSTALLAZIONE

Technical diagram showing a pipe wrench inside a mechanical component with directional arrows indicating motion or force, and a close-up view of the component's internal structure.

Diagram illustrating a mechanical or electrical component with labeled parts and directional arrows, including a magnified inset showing the joint detail.

NOTA

Pure geometric lines and crosshair symbols without any text or labels

Pure geometric diagram with intersecting lines and shapes, no text or symbols present

Technical diagram illustrating mechanical assembly steps with labeled components and directional arrows

NOTA

Line drawing of a washing machine with a door and top panel (no text or symbols)

Technical diagram showing mechanical assembly with labeled component 2 and directional arrow indicating motion

Illustration of a hand holding a card with a numbered label (1) on the cover, no text or symbols present.

Technical diagram showing two mechanical assembly steps with labeled component 1

Pure geometric lines and crosshair symbols without any text or labels

Pure geometric diagram with intersecting lines and shapes, no text or symbols present

Diagram showing a mechanical assembly with labeled component 1, likely illustrating a valve or pump mechanism.

Diagram of a faucet with a valve inserted into a pipe fitting (no text or symbols)

NOTA

Illustration showing a hand holding a device with an inset magnified view of the device (no text or symbols present)

Pure geometric lines and shapes without any text, numbers, or symbols

Pure geometric diagram with intersecting lines and shapes, no text or symbols present

20 INSTALLAZIONE

≤ 145 cm ≤ 100 cm ≤ 100 cm ≤ 105 cm

100 cm MI 100 cm VI

Line drawing of a kitchen sink with faucet and plate (no text or symbols)

Pure geometric lines and shapes without any text, numbers, or symbols

Pure geometric diagram with intersecting lines and circles, no text or symbols present

Pure geometric diagram with intersecting lines and shapes, no text or symbols present

USO

Diagram of a washing machine with a circular vent and attached bracket (no text or symbols)

Line drawing of a hand holding a tool interacting with a device, surrounded by motion lines and circular patterns (no text or symbols)

Line drawing of a refrigerator interior with labeled compartments (no text or symbols)

Hand pressing a button with an icon for playback (no text or symbols)

Pure geometric lines and shapes without any text, numbers, or symbols

Pure geometric diagram with intersecting lines and shapes, no text or symbols present

Pure electrical circuit lines without any symbols

Pure geometric diagram with intersecting lines and circles, no text or symbols present

22 USO

Diagram of a circular mechanical component with two curved arrows indicating rotational or bidirectional motion (no text or symbols)

Pure geometric lines and crosshair symbols without any text or labels

Pure geometric diagram with intersecting lines and shapes, no text or symbols present

Pure geometric lines and shapes without any text, numbers, or symbols

Pure geometric diagram with intersecting lines and shapes, no text or symbols present

24 USO

Pure electrical circuit lines without any symbols

Pure geometric diagram with intersecting lines and circles, no text or symbols present

Pure geometric lines and shapes without any text, numbers, or symbols

Pure geometric lines and shapes without any text, numbers, or symbols

Pure geometric lines and shapes without any text, numbers, or symbols

Pure geometric diagram with intersecting lines and shapes, no text or symbols present

26 USO

Diagram illustrating a garment front with labeled parts including a key, magnifying glass, and a card.

Technical diagram of a sewing machine with numbered parts labeled 1, 2, and 3

Pure geometric lines and shapes without any text, numbers, or symbols

Pure geometric diagram with intersecting lines and shapes, no text or symbols present

28 USO

Scomparto ammorbidente

Pure geometric lines and shapes without any text, numbers, or symbols

Pure geometric diagram with intersecting lines and shapes, no text or symbols present

30 USO

Pure geometric lines and shapes without any text, numbers, or symbols

Pure geometric diagram with intersecting lines and shapes, no text or symbols present

32 USO

Pure geometric lines and shapes without any text, numbers, or symbols

Pure geometric diagram with intersecting lines and shapes, no text or symbols present

34 USO

Programma	kg	h:mm	kWh	°C	Litri	giri al minuto	%
Koch-/Buntwäsche (Cotone) 20 °C	8 2:59	0,196 26 61	0 1350 50,0
Koch-/Buntwäsche (Cotone) 60 °C	8 3:59	1,552 52 61	0 1350 50,0
Mix (Misti)	4 1:21	0,603 35 54	0 1000 67,0
Kurz 14 (Rapido 14)	2 0:14	0,051 21 54	0 400 106,0
Koch-/Buntwäsche (Cotone) + Intensiv (Intensivo)	8 4:26	0,804 33 80	0 1350 50,0
Eco 40-60 (Pieno)*1	8 3:38	0,750 32 64	0 1360 44,9
Eco 40-60 (Metà)*1	4 2:35	0,360 25 40	0 1360 43,7
Eco 40-60 (Un quarto)*1	2 1:50	0,260 27 36	0 1360 44,6

Pure geometric lines and shapes without any text, numbers, or symbols

Pure geometric diagram with intersecting lines and circles, no text or symbols present

36 USO

Pure geometric lines and shapes without any text, numbers, or symbols

Pure geometric diagram with intersecting lines and shapes, no text or symbols present

NOTA

Ton An/Aus (Suono On/Off)

Pure geometric lines and shapes without any text, numbers, or symbols

Pure geometric diagram with intersecting lines and shapes, no text or symbols present

38 FUNZIONI SMART

FUNZIONI SMART

Diagram showing hand press icon pointing to two directional arrows with up/down bidirectional arrows

3 Collegare lo smartphone al router wireless.

Diagram showing a hand interacting with a Wi-Fi icon to interact with a Wi-Fi symbol, indicating wireless signal interaction.

Pure geometric lines and shapes without any text, numbers, or symbols

Pure geometric diagram with intersecting lines and shapes, no text or symbols present

40 FUNZIONI SMART

Pure geometric lines and shapes without any text, numbers, or symbols

Pure geometric diagram with intersecting lines and shapes, no text or symbols present

42 MANUTENZIONE

MANUTENZIONE

AVVERTENZA

Illustration of hands cleaning a circular object with a lid and cloth, showing motion arrows (no text or symbols)

Pure geometric lines and shapes without any text, numbers, or symbols

Pure geometric diagram with intersecting lines and shapes, no text or symbols present

Diagram of a pipe valve with directional arrow indicating rotation (no text or symbols)

Pure geometric lines and shapes without any text, numbers, or symbols

Pure geometric diagram with intersecting lines and shapes, no text or symbols present

44 MANUTENZIONE

Illustration of mechanical components including a threaded component, pliers, and a tool (no text or symbols)

Illustration of a hand holding a folder with a scroll, showing a scroll being inserted (no text or symbols present)

Diagram illustrating food preparation steps with labeled components and a magnified view of raw food items.

Pure electrical circuit lines without any symbols

Pure geometric lines and crosshair symbols without any text or labels

Pure geometric diagram with intersecting lines and shapes, no text or symbols present

Pure geometric lines and shapes without any text, numbers, or symbols

Pure geometric diagram with intersecting lines and shapes, no text or symbols present

Pure geometric lines and shapes without any text, numbers, or symbols

Pure geometric diagram with intersecting lines and shapes, no text or symbols present

Uso

Pure geometric lines and shapes without any text, numbers, or symbols

Pure geometric diagram with intersecting lines and shapes, no text or symbols present

Pure geometric lines and shapes without any text, numbers, or symbols

Pure geometric diagram with intersecting lines and shapes, no text or symbols present

Odore

Pure electrical circuit lines without any symbols

it_main.book.book Page 54 Monday, September 27, 2021 3:49 PM

Pure geometric diagram with intersecting lines and dots, no text or symbols present

Pure geometric lines and crosshair symbols without any text or labels

Pure geometric diagram with intersecting lines and shapes, no text or symbols present

Promemoria

Promemoria

Promemoria

Promemoria

Promemoria

Promemoria

Promemoria

it_main.book.book Page 55 Monday, September 27, 2021 3:49 PM

LG

Life's Good