KM0624 - Earphones Krüger&Matz - Free user manual and instructions

USER MANUAL KM0624 Krüger&Matz

Wireless headphones KM0624 KM0625

Safety Instructions Read the instruction manual before rst use and keep it for future reference.

• Minimize the volume on your audio device before connecting the headphones in order to avoid hearing damage from sudden exposure to excessive volume. Keep the volume at a reasonable level throughout entire time of using the earphones. To prevent damage to your hearing, do not raise the volume too high.

• Do not use the headphones in places where the inability to hear ambient sound presents a serious risk (such as at railroad crossings, train stations, construction sites or on roads where vehicles and bicycles are traveling). Never use the headphones while driving a car, riding a motorcycle or bicycle or operating any other vehicle, as it may cause potential risk to your safety.

• Stop using the headphones if you feel a tinnitus, hearing discomfort, irritation or have other adverse reactions.

• Do not attempt to repair this device yourself. In case of damage, contact with an authorized service point for check-up/repair.

• Do not subject the headphones to strong impact.

• Clean this device with soft, slightly damp cloth. Do not use any abrasives or chemical agents to clean this product.

• Protect this product from moisture, humidity, water and any other liquid. Avoid using/storing it in extreme temperatures. Do not expose it to direct sunlight and sources of heat.

• Never use this device if it is damaged.

• Use only authorized accessories. Product description

Operation Turning on/o: Switch the power switch to turn on the headphones. Switch again to turn o the headphones. Answering/Rejecting/Redialing/Ending a call: Press Phone button to answer an incoming call. Press Phone button again to end a call. Press and hold Phone button to reject a call. In standby mode or while playing music, press and hold Phone button to redial. Music playback: While playing music, press switch to play/pause music playback. Volume adjustment/ Music selection: Toggle to + to go to the next track; toggle and hold to increase the volume. Toggle to - to go to the previous track; toggle and hold to decrease the volume. Mode switch: Press and hold MF switch to change the mode (Bluetooth/microSD/FM radio). FM radio mode: Press and hold Phone button to search for and store available radio stations automatically. Bluetooth

1. Keep the devices in near distance (preferably within 1 meter).

2. Turn on the headphones.

3. The device will automatically enter Bluetooth pairing mode.

4. Turn on the Bluetooth on your phone (or other device), and search

for external devices.

5. Pair with the headphones (KM Wave). Enter password: “0000” if

necessary. The headphones will issue a sound signifying successful pairing.10 Owner’s manual

• Every time the headphones are switched on, they will connect to last connected device automatically. Please note, your device must be on with Bluetooth function turned on.

• When in Bluetooth mode, when there is an incoming call the headphones will switch to call automatically. MicroSD card mode

1. Insert microSD card into the slot.

2. The headphones will automatically enter microSD mode.

3. Start playing music from your microSD card.

Note: The producer does not guarantee compatibility with every microSD card. AUX Mode

1. Use 3,5 mm AUX cable and connect one end of the cable into the

3. Connect the other end into the 3,5 mm input of the device you

wish to play music from.

4. Start playing music from your device.

Charging Connect the headphones to AC charger or a computer USB port. Note:

• use only original accessories to charge the headphones.

• charge the headphones regularly to keep its battery in good condition.

• please turn o the headphones before charging.11 Owner’s manual

Operation LED Status Bluetooth pairing mode Bluetooth connection established AUX mode MicroSD mode Charging Red LED is on Radio mode Blue LED is on Automatic channel search Automatic channel search completed Blue LED is on Specication Speaker size: 40 mm Frequency Response: 20 Hz - 20 kHz

Sensitivity: 108 dB ± 3 dB microSD card player Bluetooth version: 2.1

Bluetooth range: up to 10 m Playback time: up to 5 h Standby time: up to 72 h Battery capacity: 220 mAh12 Owner’s manual

English Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or Its literature, indicates that It should not be disposed with other household wastes at the end of its working life. To prevent possible harm lo the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the

of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract This product should not be mixed with other commercial wastes for disposal.

LEARN MORE For more information on this product, go to www.krugermatz.com. Visit www.krugermatz.com website for more products and accessories. In case of any doubts or questions reach out to our Frequently Asked Questions section. “The LECHPOL ELECTRONICS Sp. z o.o. Sp.k. company declares that product KM0624 / KM0625 is consistent with the essential requirements and other relevant provisions of directive 2014/53/UE. The proper declaration for download from www.lechpol.eu”Mode d’emploi