LVS1251X1 - Dishwasher SMEG - Free user manual and instructions

Find the device manual for free LVS1251X1 SMEG in PDF.

SMEG LVS1251X1 - Dishwasher
📄 36 pages English EN ⬇ Download 💬 AI Question ❓ 2 questions
Notice SMEG LVS1251X1 - page 1
1 / 36
Pick your language and provide your email: we'll send you a specifically translated version.

User questions about LVS1251X1 SMEG

2 questions about this device. Answer the ones you know or ask your own.

Ask a new question about this device

Your email remains private: it is only used to notify you if someone answers your question.

How to reset or cancel an alarm on my SMEG LVS1251X1 dishwasher?
Frequently Asked Questions - 2 d
Response Notice-Facile

If your SMEG LVS1251X1 dishwasher displays an alarm or error code, there is a simple reset procedure.

First method: open and close the door

Open the appliance door, wait a few seconds, then close it again. This is usually enough to cancel a temporary alarm.

Second method: turn the machine off and on

Press the ON/OFF button to completely turn off the appliance. Wait about 10 seconds, then press ON/OFF again to restart it.

After this reset, your machine will resume normal operation and the alarm will disappear.

If the alarm persists after these two actions, consult the error code table in the manual (accessible via the PDF viewer on this page) to identify the specific type of anomaly and take appropriate measures.

Respond (be the first)
Why doesn't the wash cycle start on my SMEG LVS1251X1 dishwasher?
Frequently Asked Questions - 2 d
Response Notice-Facile

If the wash cycle does not start on your SMEG LVS1251X1 dishwasher, first check these essential points:

  • Is the water supply tap open? Make sure that the main water supply tap is fully open. This is often the first cause of a cycle not starting.
  • Is a program selected? Use the program selection button to choose one of the 5 available cycles: Soaking, Light, Bio (50°C), Normal (65°C), or Ultra Clean (70°C).
  • Has the Start/Pause button been pressed? After selecting your program, you must press the Start/Pause button to start the cycle. The indicator lights on the dashboard will light up to confirm the start.
  • Is there regenerating salt? If the salt level indicator is active (light on), fill the compartment with regenerating salt. A lack of salt can sometimes prevent the start.
  • Is there detergent? Make sure that the detergent compartment is not empty. You can use 3-in-1 combined products or regular detergent.

If after checking these items the cycle still refuses to start, consult the troubleshooting section of your manual or contact SMEG customer service.

Respond (be the first)

Download the instructions for your Dishwasher in PDF format for free! Find your manual LVS1251X1 - SMEG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LVS1251X1 by SMEG.

USER MANUAL LVS1251X1 SMEG

ADDITION DU PRODUIT POUR LE RINÇAGE

Table of contents Click a title to access it
Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : SMEG

Model : LVS1251X1

Category : Dishwasher