SWJ698E - Saw Sun Joe - Free user manual and instructions
Find the device manual for free SWJ698E Sun Joe in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Electric Chain Saw |
| Brand | Sun Joe |
| Model | SWJ698E |
| Power Supply | Electric Corded (230 V / 50 Hz) |
| Nominal Power | 1200 W |
| Guide Bar Length | 35 cm (14 inches) |
| Max Cutting Capacity | 30 cm diameter |
| Chain Speed at No Load | 12 m/s |
| Weight | 4.5 kg |
| Dimensions (L × W × H) | 45 × 25 × 25 cm |
| Oil Tank Capacity | 200 ml |
| Sound Pressure Level | 105 dB(A) |
| Main Functions | Wood cutting, pruning, bucking |
| Safety Devices | Chain brake, trigger lock, emergency stop |
| Maintenance and Cleaning | Clean after each use, oil the chain regularly, check tension |
| Available Spare Parts | Chain, guide bar, protective cover |
| Repairability | Repairability score: 7.5/10 (estimate) |
| Warranty | 2 years manufacturer's warranty |
| Manual Contents | 72 pages, detailed instructions in French |
Frequently Asked Questions - SWJ698E Sun Joe
How to start the Sun Joe SWJ698E saw?
Make sure the saw is plugged in and the chain brake is disengaged. Press the trigger lock, then the trigger to start. Refer to the manual for details.
What oil to use for the chain?
Use a special chain saw oil, preferably biodegradable. Do not use used motor oil.
How to adjust the chain tension?
Loosen the guide bar nuts, turn the tensioning screw to adjust the chain until it touches the bottom of the bar, then tighten the nuts. The chain should not sag.
What to do if the chain jams?
Release the trigger, unplug the saw, then carefully remove the stuck wood with a non-metal tool. Check the chain sharpness.
How to clean the saw after use?
Unplug the saw, remove the chain and bar. Clean debris with a soft brush. Wipe the body with a damp cloth. Do not use solvents.
What is the maximum cutting capacity?
The saw can cut branches or logs up to 30 cm in diameter with a 35 cm bar.
How to replace the chain?
Unplug the saw. Remove the protective cover, loosen the guide bar nuts, remove the old chain, place the new one with teeth facing forward, then adjust tension.
The chain brake does not work, what to do?
Check if the brake is dirty. Clean it with a dry cloth. If the problem persists, contact Sun Joe customer service.
Can I use an extension cord?
Yes, use an extension cord suitable for the saw's power (minimum 1.5 mm² section for 15 m, 2.5 mm² beyond). Avoid coiled extension cords.
Where to find spare parts?
Spare parts (chain, bar, cover) are available at authorized Sun Joe dealers or on the official website. Use the references indicated in the manual.
User questions about SWJ698E Sun Joe
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Saw in PDF format for free! Find your manual SWJ698E - Sun Joe and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SWJ698E by Sun Joe.
USER MANUAL SWJ698E Sun Joe
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Sun Joe
Model : SWJ698E
Category : Saw