FITvigo AM1800 - Smartwatch ADE - Free user manual and instructions

USER MANUAL FITvigo AM1800 ADE

Aktivitätstracker AM 1800 | 1801 DeutschGeneral Information Activity Tracker AM 1800 | 1801 Dear Customer! You have chosen to purchase a product from the FITvigo program from ADE: Activity trackers, bathroom and analyser scales, as well as blood pressure monitors with Bluetooth functionality, which can be connected to the free FITvigo app. We hope you enjoy your FITvigo product. Your ADE Team General Information About this manual This operating manual describes how to safely use and care for your products. Keep this operating manual in a safe place in case you would like to refer to it later. If you pass this item on to someone else, pass on this manual as well. Failure to observe the recommendations in this operating manual can lead to injuries or damage to your product. Explanation of symbols This symbol, combined with the word DANGER, warns against serious injury. This symbol, combined with the word WARNING, warns against moderate and mild injuries. This symbol, combined with the word NOTE, warns against material damage. This symbol signifies additional information and general advice.Table of Contents

Activity Tracker AM 1800 | 1801 Intended Use The activity tracker is used to monitor your sporting activities. The activity tracker is designed exclusively for use in the private sphere and is not suitable for medical or sports medicine use. Persons with portable or implanted medical electronic devices such as a cardiac pacemaker should use the activity tracker only after consultation with the attending physician. Safety Children must not play with the item. Cleaning and user maintenance must not be carried out by children, unless they are 8 years of age or older and are being supervised. DANGER for children Keep children away from the item and packaging materials. Risk of choking if swallowed. Also beware that children do not pull the packaging material over their heads. BEWARE of material damage The activity tracker is water-proof according to protection type IP67. However, avoid warm water. Do not make any modications to the item. Only allow repairs to be carried out at a specialist workshop. Repairs carried out incorrectly can considerably endanger the user. Scope of Delivery Activity Tracker Quick start guide Detailed manual (for download) You can download the “FITvigo” app for free from the internet, see “Install A p p”.Overview

Symbol Function Symbol Function Switching off Training mode Time

Stop Day of the week Inactivity alert Number of steps Incoming call, caller ID, call rejection Calorie consumption Messages Distance Find your phone Pulse rate Time format Function setting Reset to factory settings Alarm Calendar / Reminders wWhat your activity tracker offers

Activity Tracker AM 1800 | 1801 What your activity tracker offers Your activity tracker offers you the following functions or indications: Time Date Daily activity with the following details: number of steps, distance covered (miles/km), calories burned (Kcal), heart rate The values are shown on the display and in the FITvigo app Sleep monitoring Alarm Reminder function Smart notications (message function) Sport modes Inactivity alert Smartphone search function using FITvigo app Start-up Charging the battery

1. Connect the charging cable to the activity

2. Insert the USB port of the charging cable

into the USB port of a computer (PC, tablet, notebook) or a USB charger. Check the contacts of the USB port and the charging indicator in the display. Charging time before first use: approx. 45 minutes. Downloading and installing the app Install app

1. Make sure that your smartphone is connected to the internet.

2. Download the “FITvigo” app in the Apple app store (iOS) or Google Play store

Activity Tracker AM 1800 | 1801 English Depending on the settings of your smartphone, additional costs may be incurred for the internet connection or data transfer. The FITvigo app itself is free. We recommend downloading over a wireless network. Connecting the device to the app (pairing)

1. Place your smartphone and activity tracker close together.

2. Activate Bluetooth on your smartphone.

3. Start the “FITvigo” app and follow the instructions.

Pay attention to the information and explanations displayed. The activity tracker will be connected to the FITvigo app after a short while. Use Wearing the activity tracker Wear the activity tracker as shown: Put on the strap in such a way that the activity tracker is comfortable to wear. Blood circulation must not be restricted. During movement, e.g. when running and especially during pulse measurement, the activity tracker must be well-tted. Activating the display Requirement: The tracker is already switched on. − Press on the display for about 3seconds to switch on the tracker. To activate the deactivated display: Touch the display or lift your arm or rotate the activity tracker on your wrist.Use

Activity Tracker AM 1800 | 1801 When the battery is weak, automatic activation of the display by "lifting the arm" or "rotating on the wrist" is inactive. Thereby, power is saved and battery life extended. In this case, activate the display by touching it. Navigation − Viewing display contents and functions: Swipe − to change the menu level Tap − to view the functions Note: Depending on the selected function, not all "motion axes" are available. Display actions Basic operation Switching on − Press the display for approx. 3 seconds. Switching off − Select , then tap and hold . Selecting the operating level − Swipe the display up or down. Viewing functions in an operating level − Tap the display. Going back one level − Swipe upwards on the display. Selecting a function/Confirming a setting − Press and hold the display. An additional vibration conrms the successful selection.Using functions

Activity Tracker AM 1800 | 1801 English Selecting time format − Select , then tap and hold . − Tap to select the desired time format and then press and hold the display to conrm the selection. Using functions Measuring activity data − Display the time and tap repeatedly. Data displayed in succession: - Number of steps - Calorie consumption - Distance covered Measuring heart rate The heart rate is automatically measured on a regular basis and average values are transferred to FITvigo app in 10 minute intervals. The activity tracker does not recognise if it isn‘t worn. Hence the automatic pulse measuring will be performed continuously. In order to avoid faulty pulse data, please switch o your activity tracker as soon as you stop wearing it (see „Basic operation“). To measure the heart rate manually: − Display the time and tap repeatedly until appears on the display. After a few seconds, the measured value will be displayed on the display. Sleep monitoring The sleep monitoring must not be activated manually. The activity tracker automatically detects whether you are sleeping in the period from 8 p.m. to 9 a.m. This does not mean that you cannot sleep longer than 9a.m., but you must go to sleep within this timeframe for sleep monitoring to begin. If you go to sleep outside of this time, it will not be registered.Using functions

Activity Tracker AM 1800 | 1801 Using smart notifications (message function) If access is granted to the FITvigo app, the tracker detects if you receive messages on your smartphone, e.g. on WhatsApp or Facebook messenger, and vibrates. In addition is indicated on the display above the time. To read messages: − Select , then scroll through the displayed messages by tapping. To delete a message: − Select the message to be deleted and press the display until the tracker vibrates. Pay attention to the following: Only text is displayed. Once you have read all messages, the symbol disappears. Whether and which messenger messages are displayed, depends on the settings of your smartphone and permissions in the FITvigo app. If access is granted to the FITvigo, phone calls will also appear on your tracker: Next to the call symbol a phone number of the caller appears and the tracker vibrates. Press and hold the display to reject the call on the tracker if needed. Using sport modes The tracker offers a variety of sport modes. Select the one that corresponds to your kind of sport or suits you the best.

, select the desired sport mode by tapping.

2. Press on the display for several seconds to start the measurement.

3. Begin the workout.

4. Press and hold the display to stop the measurement at the end of the workout.

After that you will be shown a summary of all fitness values (heart rate, calorie consumption etc.). If you swipe the display, the summary vanishes. By tapping the display you can view the different fitness values already in the course of the measurement.Using functions

2. Tap Show alarm in the lower right hand corner.

3. Tap Add alarm at the bottom edge.

4. Tap Set alarm time.

5. Specify the time and tap OK.

6. Tick to select the desired alarm day.

7. Tap Save alarm 1.

The data will be transferred to the tracker.

The tracker will wake you up at the set time on the selected day by vibration. In addition the time and alarm symbol will be shown on the display. − Tap the display to delete the indicated data. Setting reminders The reminder function is set via the FITvigo app. The reminder itself occurs by vibration of the tracker. In addition a text is displayed, which you can enter yourself.

1. Start the FITvigo app.

2. Tap the bell symbol in the upper left hand corner.

3. Tap Add new reminder.

4. Enter the desired reminder text into the input box in a brief and concise manner.

5. Set day and time.

6. Then tap again Add new reminder.

The tracker will vibrate and you will receive the entered text at the set time on the selected day. Inactivity alert If you make less than 100 steps within an hour in the period between 9 a.m. and 8 p.m., you will be reminded by the activity tracker about necessary movement: The tracker will vibrate and show the symbol of inactivity in the display.Cleaning

Activity Tracker AM 1800 | 1801 Find-your-phone-function This function will help you to find your smartphone. − Select , then tap and hold . Your smartphone starts ringing (depending on the settings of your smartphone manufacturer). Cleaning NOTE on material damage − Do not immerse the tracker in liquids other than water (water-tightness rating IP67). − Never use harsh or abrasive cleaning agents or the like to clean the tracker. If you do, the surface could be scratched. − Using a soft, lightly dampened cloth, wipe the tracker clean as needed. Fault/Remedy Fault Possible Cause No function/display indication. Activity tracker switches o. Is the battery completely charged? Apparently incorrect measurement results. Large dierence between the last measurements. You have gone fewer than 10 steps. You’re sliding across the oor or are wearing slippers on your feet. Error message on the display when pairing. Data transmission has failed. Has Bluetooth been activated on your smartphone? Is the FITvigo app active? Was the distance between the tracker and smartphone too large? Max. permitted distance for Bluetooth: approx. 10m. The tracker is shown as connected in the app, but no data transfer occurs for several minutes. Check whether the tracker is also displayed as connected in the Bluetooth settings of the smartphone. Manually conrm the pairing to the tracker via the smarthphone if needed.Technical Data

Activity Tracker AM 1800 | 1801 English You will find further questions and answers on the internet at www.fitvigo.de/support. Do you need help or do you have additional questions? Then please send us an e-mail to: [e-mail] Technical Data Battery: Lithium battery with 55 mAh Protection class: IP67 Temperature range: -20 to 60 °C Bluetooth-compatible: from version4.0 Transmission frequency: 2.4 GHz max. Transmission power: 0 dBm Distributor (no service address): Waagen-Schmitt GmbH Hammer Steindamm 27-29 22089 Hamburg, Germany Our products are constantly being refined and improved. For this reason, design and technical modifications are possible at any time. Declaration of Conformity Waagen-Schmitt GmbH hereby declares that the electronic activity trackers AM 1800 and AM 1801 comply with the directives 2014/53/EU and 2011/65/EU. The full text of the EU conformity declaration is available via the following Internet address: www.ade-germany.de/doc The declaration loses its validity if modifications have been made to the device without our approval. Hamburg, March 2018 Waagen-Schmitt GmbH Hammer Steindamm 27-29 22089 Hamburg, GermanyGuarantee

Activity Tracker AM 1800 | 1801 Guarantee The company Waagen-Schmitt GmbH guarantees for 2 years from the purchase date the cost-free rectification of defects on the basis of material or fabrication errors through repair or exchange. In the event of a guarantee claim, please return the product with the proof of purchase (stipulating the reason for claim) to your dealer. Disposal Disposing of the packaging Dispose of the packaging with similar materials. Put cardboard with waste paper, foil with recyclable materials. Disposing of the product Dispose of the product in accordance with the regulations that apply in your country. Devices must not be disposed of in normal household waste At the end of its life, the product must be disposed of in an appropriate way. In this way, valuable materials contained in the device will be recycled and the burden on the environment avoided. Hand in the old device at a collection point for electronic waste or at a recycling depot. For more information, contact your local waste disposal firm or your local administrative body. Recyclable and disposable batteries do not belong in household waste All batteries must be handed in at a collection point in your community, suburb, or at the retailer. Such batteries can thus be disposed of in an environmentally friendly way.Guarantee