BL109909 - Blender Emerio - Free user manual and instructions

USER MANUAL BL109909 Emerio

Content – Inhalt – Contenu – Contenuto Instruction manual – English ...................................................................... - 2 - Bedienungsanleitung – Deutsch ................................................................ - 6 - Mode d‘emploi – Français........................................................................ - 11 - Manuale d'istruzioni – Italiano ................................................................ - 16 -- 2 - Instruction manual – English SAFETY INSTRUCTIONS Before use make sure to read all of the below instructions in order to avoid injury or damage, and to get the best results from the appliance. Make sure to keep this manual in a safe place. If you give or transfer this appliance to someone else make sure to also include this manual. In case of damage caused by user failing to follow the instructions in this manual the warranty will be void. The manufacturer/importer accepts no liability for damages caused by failure to follow the manual, a negligent use or use not in accordance with the requirements of this manual.

1. Warning: Potential risk of injuries from misuse.

2. Always disconnect the appliance from the supply if it is left

unattended and before assembling, disassembling or cleaning.

3. This appliance shall not be used by children. Keep the

appliance and its cord out of reach of children.

4. Appliances can be used by persons with reduced physical,

sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and if they understand the hazards involved.

5. Children shall not play with the appliance.

6. If the supply cord is damaged, it must be replaced by the

manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

7. Switch off the appliance and disconnect from supply before

changing accessories or approaching parts that move in use.

8. Care shall be taken when handling the sharp cutting blades,

emptying the bowl and during cleaning.

9. Before inserting the plug into the mains socket, please

check that the voltage and frequency comply with the specifications on the rating label.- 3 -

10. If an extension cord is used it must be suited to the power

consumption of the appliance, otherwise overheating of the extension cord and/or plug may occur.

11. Disconnect the mains plug from the socket when the

appliance is not in use and before cleaning.

12. Ensure that the mains cable is not hung over sharp edges

and keep it away from hot objects and open flames.

13. Do not immerse the appliance or the mains plug in water or

other liquids. There is danger to life due to electric shock!

14. To remove the plug from the plug socket, pull the plug. Do

not pull the power cord.

15. Do not touch the appliance if it falls into water. Remove the

plug from its socket, turn off the appliance and send it to an authorized service center for repair.

16. Do not plug or unplug the appliance from the electrical

outlet with a wet hand.

17. Never attempt to open the housing of the appliance, or to

repair the appliance yourself. This could cause electric shock.

18. Children are unable to recognize the hazards associated

with incorrect handling of electrical appliances. Therefore, children should never use electric household appliances unsupervised.

19. Never leave the appliance unattended during use.

20. This appliance is not designed for commercial use.

21. Do not use the appliance for other than intended use.

22. Do not wind the cord around the appliance and do not bend

23. The use of accessory attachment not recommended by the

appliance manufacturer may cause injuries.

24. Do not allow children to use the blender without

25. Regarding the instructions for cleaning the surfaces which

come in contact with food, speed settings and operating times, please refer to the below paragraph of the manual.- 4 - BL-109909.2 EN

Switch speed setting

Caution: Make sure the motor base is unplugged from the power source and the control knob is set at the position 0.

1. Place the jug onto the motor base. Rotate the jug clockwise to have it locked on the motor base. The jug

must be placed as shown on the above picture.

2. Put the liquid and food, after dicing them, into the jug, making sure not to go over the maximum level marked

on the jug. Note: Never fill the jug with ingredients that are hotter than 80°C .

3. Put the lid onto the jug and put the measuring cap into the lid. Rotate the measuring cap to have it fixed

4. Put the plug into the wall socket. Switch on the appliance by rotating the control knob to choose the speed

1, 2 or pulse function.

5. After use, rotate the control knob to the position 0 and remove the plug from outlet.

The appliance is equipped with a safety switch; it only works when the jug has been placed correctly.

CLEANING AND MAINTENANCE

1. First remove the mains plug from the wall socket. Do not immerse the motor base in water. You can clean the

motor base with a humid cloth. Do not use abrasive cleaning materials.

2. Disassemble the other parts after each use and wash them in soapy water. Then rinse with clean water and

dry thoroughly. Glass jug, lid and measuring cap can be cleaned in a dishwasher.

3. It is easy to do the cleaning immediately after each use. Empty the jug and fill it with water. Turn the switch

several times at the “pulse” setting. CAUTION Never use boiling liquids. Never run the blender empty or with solids only. To reduce the risk of injury, never operate the appliance without the lid and measuring cap in place. Do not remove the jug from the motor base while the appliance is in operation. Do not use the appliance if blade assembly is bent or damaged. This appliance is designed for intermittent operation. After 1 minute continuously operation it is required to be switched off for 1 minute to prevent overheating. After 15 cycles, please switch it off for 1 hour.- 5 - TECHNICAL DATA Voltage: 220-240V ~ 50/60Hz Power: 500W

GUARANTEE AND CUSTOMER SERVICE

Before delivery our devices are subjected to rigorous quality control. If, despite all care, damage has occurred during production or transportation, please return the device to your dealer. In addition to statutory legal rights, the purchaser has an option to claim under the terms of the following guarantee: For the purchased device we provide 2 years guarantee, commencing from the day of sale. If you have a defective product, you can directly go back to the point of purchase. Defects which arise due to improper handling of the device and malfunctions due to interventions and repairs by third parties or the fitting of non-original parts are not covered by this guarantee. Always keep your receipt, without the receipt you can’t claim any form of warranty. Damage caused by not following the instruction manual, will lead to a void of warranty, if this results in consequential damages then we will not be liable. Neither can we hold responsible for material damage or personal injury caused by improper use if the instruction manual is not properly executed. Damage to accessories does not mean free replacement of the whole appliance. In such case please contact our service department. Broken glass or breakage of plastic parts is always subject to a charge. Defects to consumables or parts subjected to wearing, as well as cleaning, maintenance, replacement of said parts or shipping and transportation costs to and from any place of repair are not covered by the warranty and are to be paid.