BOOST GAB 12V6V10A - Battery charger Güde - Free user manual and instructions

USER MANUAL BOOST GAB 12V6V10A Güde

Translation of the original instructions Automatic battery charger

8:88 (95%) Power Volume BOOST GAE 100-15A QQ

GAB 12V-15A

85143

GÜDE GmbH & Co. KG

Birkichstrasse 6

74549 Wolpertshausen

Deutschland

ENGLISH Please read the instructions carefully before starting the machine.

Scanned document page with placeholder text and a button labeled 'SUB' in the bottom right corner.

GAB 12V/6V-10A

85142

8.8.8 8.8.8 BOOST GAS G9

GAB 12V-15A

85143

8.8.8 8.8.8 Q9 BOOST GAS 15A Q9

DE	Batterie laden	PL Ładowanie akumulatora	START
EN	Charging
FR	Fonction chargement
IT	Funzione caricamento	GAB 12V/6V-10A	1
NL	Laadfunctie
CZ	Funkce nabíjení
SK	Funkcia nabíjania
HU	Töltés

DE	Batterie laden	PL Ładowanie akumulatora
EN	Charging
FR	Fonction chargement
IT	Funzione caricamento	GAB 12V-15A
NL	Laadfunctie
CZ	Funkce nabíjení
SK	Funkcia nabíjania
HU	Töltés
1	DE Batterie laden	PL Ładowanie akumulatora
	EN Charging
	FR Fonction chargement
	IT Funzione caricamento
	NL Laadfunctie
	CZ Funkce nabíjení
	SK Funkcia nabíjania
	HU Töltés

GAB 12V/6V-10A 85142

1 + - 2 888 888 888 888 888 888 888 888 888 888 888 888 888 888 888 888 888 888 888 888 888 888 888 888 888 88B

2 P 5 sec

graph TD
    A["Ar"] --> B["Amp 10A"]
    B --> C["Ar"]
    C --> D["05A"]
    D --> E["Ar"]
    E --> F["02A"]
    F --> G["Ar"]
    G --> H["05A"]

START 1 STOP

4

06V Vo 12V

5 max 10 h + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

6

on/off

8 2 + - 1

7

Electrical plug with a curved cable and a wall-mounted power outlet, shown with an arrow indicating direction (no text or symbols)

	DE	Batterie laden	PL	Ładowanie akumulatora
	EN	Charging
	FR	Fonction chargement
	IT	Funzione caricamento
	NL	Laadfunctie
	CZ	Funkce nabíjení
	SK	Funkcia nabíjania
	HU	Töltés

GAB 12V-15A 85143

1 12 V BOOST

2 P 5 sec

graph TD
    A["06A"] --> B["Amp"]
    B --> C["10A"]
    C --> D["Amp"]
    D --> E["15A"]
    E --> F["Amp"]
    F --> G["02A"]
    G --> H["Amp"]
    H --> I["02A"]
    I --> J["Amp"]
    J --> K["02A"]
    K --> L["Amp"]
    L --> M["02A"]
    M --> N["Amp"]

DE Batterie laden

START STOP

5 max 10 h BOOST + - B

6 on/off

8 2 + - 1 BOOST GQ

Electrical plug with a cable and a wall socket, shown with an arrow indicating direction (no text or symbols)

[×H6W]	DE	Batterie laden	PL	Ładowanie akumulatora
	EN	Charging
	FR	Fonction chargement
	IT	Funzione caricamento
	NL	Laadfunctie
	CZ	Funkce nabíjení
	SK	Funkcia nabíjania
	HU	Töltés

GAB 12V-15A 85143

GAB 12V-15A-BOOST + 20kV/400 PZ + 12kV/500V/15A/15A - 10 V + 10kV / 15A/15A/15A/15A - 1.2V A Gude® Cable Cable Cable Cable Cable Cable Cable Cable Cable Cable Cable Cable Cable Cable Cable Cable Cable Cable Cable Cable Cable Cable Cable Cable Cable Cable Cable Cable Cable Cable Cable Cable Cable Cable

2 P 5 sec

3

4 on/off

Electrical plug with a black terminal and a wall-mounted power outlet, shown with an arrow indicating direction (no text or symbols)

START 2 STOP

1

12 V 888 800V Q9

2

P 5 sec

3

200% BODST 5 min

STEP 1 DIAGNOSIS	Check that the battery is connected to the charger and check the battery voltage.
STEP 2 SOFT START Charging with Echelon constant current
STEP 3 BULK	Charging with constant maximum current until the battery voltage has reached the threshold value
STEP 4 ABSORPTION	Gradually decreasing current charge for maximum battery voltage.
STEP 5 ANALYSE Test - whether the battery can hold the charge.
STEP 6 MAINTENANCE	Continuous monitoring of the battery and intelligent adaptation of the charging current to the variable battery voltage.

ERROR CODES

E01 The temperature in the charger is too high

E02 No-load or the battery voltage is rather low

E03 Choose 6V charging modes for 12V batteries

E04 Battery cannot hold charge - dead battery

E05 Battery cannot reach to the threshold after charging for a period - dead battery

E06 Reverse connection + -

P12 Cigarette lighter active

Technical Data

BATTERY CHARGER GAB 12V/6V-10A GAB 12V-15A
Art. No	85142	85143
Mains voltage / Mains frequency 230 V ~ 50 Hz 230 V ~ 50 Hz
Rated input 250 W 320 W
Output voltage 6 V / 12 V	---	12 V ---
Weight	1,0 kg	1,75 kg
Safety class II II
Rated capacity 2-150 Ah (6V)	2-300 Ah (12V)	2-400 Ah
Charging rms current 2/5 A (6V)	2/5/10 A (12V)	2/6/10/15 A
Number of cells in the battery to charge	3 / 6 6

Read and understand the operating instructions before using the appliance. Familiarise with the

control elements and how to use the appliance properly. Abide by all the safety measures stated in the service manual. Act responsibly toward third parties.

The operator is responsible for accidents or risks to third parties.

In case of any doubts about connection and operation refer please to our customer center

Safety Instructions

WARNING

Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference.

The product is designed for use by persons aged 16 or older.

This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance.

Cleaning and user maintenance shall not be made by children without supervision. To avoid danger, a damaged mains supply pipe must be replaced by the manufacturer.

WARNING! Electric shock! There is a risk of ry caused by electric shock!

Never operate the apparatus if a cable, the mains cord or plug are damaged. Damaged mains cords pose a hazard of electrocution.

Risk of fire! Risk of explosion!

A highly-explosive oxyhydrogen mixture occurs when batteries are charged.

• Fire, sparks, naked flames and smoking are forbidden.
• Provide adequate ventilation.
• Do not use the device in rooms in which easily flammable material or gases may be present.

Never use the charger in moist or wet conditions. Suitable for indoor areas only.

Make sure the cooling function is not limited by covering the cooling slots. Do not operate the appliance near heat sources or on a flammable surface.

Only connect or disconnect the battery connection cable if the charger is not connected to the mains.

Also pay attention to the instructions and information provided by the battery and vehicle manufacturer.

Ensure that the vehicle is switched off if the battery is mounted fixed in the vehicle! Switch off the ignition. Park the vehicle and secure it.

1. First connect the red battery clip to the positive terminal of the battery.
2. Then connect the black battery clip with the negative terminal of the battery (Mounted in the chassis, away from the battery and fuel line).
3. Plug the charger into a mains socket.
4. After charging: Disconnect the charger from the mains socket.
5. First remove the black clip from the chassis and then the red clip from the battery.

This sequence must be followed!

Danger of short circuit! Make sure that the two clips of the pole connecting cables do not touch or are connected by a conductive object, such as a tool. Handle the terminal connecting cable (“−” and “+”) only by the insulated sections!

Never hold both clips at the same time when the device is running.

Specified Conditions Of Use

The battery charger is only to be used for charging and starting of vehicles taking all technical data into consideration.

Types of batteries:

• Lead acid batteries (liquid electrolyte) (PB)
• Gel battery (GEL)
• Absorbent glass mat battery (AGM))
• Wet-cell batteries (WET)
• Maintenance-free lead acid batteries (MF)

WARNING

It is not suitable for charging Li-ion, NiCad or NiMH batteries and other non-rechargeable batteries, for example.

Please note that our equipment has not been designed for commercial, craft or industrial use. If the equipment is used in commercial, craft or industrial operation or for similar activities, we cannot assume any liability.

Do not use this product in any other way as stated for normal use. Not observing general regulations in force and instructions from this manual does not make the manufacturer liable for damages.

Residual risks

Even when the device is used properly and all safety regulations are complied with, there still may be some residual risks.

WARNING!

Wear eye protective goggles! Wear gloves! Keep childrenaway from acids and filled batteries.

Corrosion Hazard!

Battery acid is highly caustic.

First Aid

Rinse out any acid splashed into the eyes immediately using clear water for several minutes. Consult a doctor immediately.

Neutralise acid splashes on skin or clothes immediately using acid neutraliser or soap suds and rinse with plenty of water. If acid is consumed, consult a doctor immediately.

Emergency procedure

Conduct a first-aid procedure adequate to the injury and summon qualified medical attendance as quickly as possible. Protect the injured person from further harm and calm them down. If you seek help, state the following pieces of information: 1. Accident site, 2. Accident type, 3. Number of injured persons, 4. Injury type(s)

Mains Connection

Operation is only allowed with a safety switch against stray current (RCD max. stray current of 30mA).

Before putting into operation, a qualified electrician must check whether electric safety measures required are in place. Any national regulations in this regard must be complied with.

Electric connection to a socket.

It is necessary to make sure the connecting socket was not near water and humidity and the plug was protected against humidity.

Check the voltage. Technical data given on the type label must correspond with electric network voltage. Only use splash proof extension cables approved for outdoor purposes.

Check the cable and/or socket for damages before the appliance putting into operation.

Never use the charger when the cable, plug or the machine is damaged by external influences. In case damage let repaired in authorized workshop

To avoid danger, a damaged mains supply pipe must be replaced by the manufacturer. Do not under any circumstances attempt any repair yourself.

Cable connections to be separated by pulling the plug only. Pulling the cable could damage both the cable and plug. As a result, electric safety would no longer be guaranteed.

Over-temperature protection

The power will automatically be reduced should the apparatus heat up too much during charging. This will protect the apparatus.

Symbols

WARNING/Caution!

Warning against dangerous electric voltage

Read the operating instructions to reduce the risk of injury.

Wear eye protective goggles!

Wear gloves!

Unplug the machine before any work on it.

Charger to be used in closed spaces only.

\~

AC Current

Plus - positive terminal

-

Minus - negative terminal

This equipment is in safety class II.

三

Direct Current

CE marking

Any damaged or disposed electric or electronic devices must be delivered to appropriate collection centres.

Maintenance

Unplug the machine before any work on it.

The connection clamps, clips and the upper surface of the battery must be kept clean; if necessary clean the battery clips with a wire brush.

Repairs and works specified in these Instructions may only be performed by qualified authorised staff.

Use only original accessories and original spare parts.

Before using the appliance, perform a visual inspection at all times to make sure the power cord and the plug, in particular, are not damaged on the charger.

Clean only with dry cloth. Certain cleaning agents and solvents are harmful to plastics and other insulated parts. Keep the apparatus handle clean, dry and free of oil or grease.

Only a regularly maintained and treated appliance can serve as a satisfactory aid. Insufficient maintenance and care can lead to unforeseen accidents and injuries.

If necessary, a list of spare parts can be found at www.guede.com.

Disposal

Do not dispose of electric tools together with household waste material.

Pursuant to European Directive 2002 / 96 / EC on Electrical and Electronic waste and to national legislation, electrical and electronic waste must be collected separately and delivered to a recycling facility for environmentally responsible disposal.

Check with your local authority or retailer for recycling advice and collection point.

Battery disposal

Pursuant to the Battery Ordinance you, as the end user, will be obligated to return all used batteries/rechargeable batteries.

Flat batteries must not be disposed of with household waste. Care for the environment and take them to the collection points provided in accordance with national or local regulations. Please contact your local authority or your dealer for how to dispose of batteries properly.

Guarantee

Warranty period of 12 months applies to commercial use and 24 months applies to private use and commences on the day of purchase of the device.

The guarantee solely covers inadequacies caused by material defect or manufacturing defect. Original payment voucher with the sales date needs to be submitted for any claim in the guarantee period.

The guarantee does not cover any unauthorised use such as appliance overloading, use of violence, damage as a result of any unauthorised interference or caused by foreign items. Failing to follow the operating and assembly instructions and common wear are also not included in the guarantee.

Important information for the customer

Please be sure to know that returning the product in or after the warranty period must be made in the original packaging.

Service

Do you have any technical questions? Any claim? Do you need any spare parts or operating instructions? We will quickly help you and without needles bureaucracy at our web pages at www.guede.com in the Servicing part. Please help us be able to help you. In order to identify your device in case of claim we need the serial No., product No. and year of production. All this data can be found on the type label.

Tel.: [phone] / 700-360

Fax: [phone]

E-Mail: [e-mail]

Protection anti-surchauffe

WAARSCHUWING/Opgelet!

Translation of the EC-Declaration of Conformity

We, hereby declare the conception and construction of the below mentioned appliances correspond - at the type of construction being launched - to appropriate basic safety and hygienic requirements of EC Directives.

In case of any change to the appliance not discussed with us the Declaration expires.

GAB 12V/6V-10A-BOOST

Notified Body Name: No: Adress:

Type Ex. Cert.-No.:

97/68/EC_&2016/1628/EU

Emission No.:

2000/14/EC_2005/88/EC