CEQLED50SA21B7 - TV CONTINENTAL EDISON - Free user manual and instructions

USER MANUAL CEQLED50SA21B7 CONTINENTAL EDISON

We invite you to read this user manual carefully and completely before installing and using your device. It is important that this user manual be kept with the device for further consulta- tion. If this device is to be transferred to another person, make sure the user manual follows the device so that the new user can be informed of the operation of the device. The warning sign showing a lightning bolt in a triangle indicates that this product contains "dangerous electrical voltages". The warning sign showing an exclamation point in a triangle indicates that this point of the manual requires special attention. CAUTION

TROCUTION, DO NOT REMOVE THE

CAUTION:-TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR SERIOUS INJURY: ●This device must only be connected to a mains network whose charac- teristics are identical to those shown on the device identification plate. ●If it is a class I appliance, the user's protection is grounded. The appli- ance must be connected to a power supply base with a connection to the protective earth. ●This device bears the logo , it is a class II electrical device in which the protection against electric shock is not based solely on main insulation but on double insulation. It does not have protec-tive grounding ●The mains plug must always be easily accessible. It serves as a mains disconnecting switch of the device. ●To disconnect the device from the mains, the plug must be disconnect- ed.Hold the mains cable by its plug. Do not pull on the mains cable to disconnect the plug. ●The mains cables must be routed so that they are not trampled upon or pinched by objects placed on or against them. ●If the mains cable of the device is damaged, it must be replaced by the manufacturer, its after-sales service or a similarly qualified person to avoid any danger. ●The device must not be exposed to dripping or splashing water,moisture or liquids. ●Do not place the device near water, for example in a bathroom or near a sink. ●No objects filled with liquids such as vases should be placed on or above the device. ●Never touch the mains cable with wet hands, this could cause a short circuit or electric shock. ●To avoid the risk of fire, do not place sources of open flames, Such as lighted candles, or heat sources such as radiators, on or near the device.The device is intended for use only in a temperate climate. ●If smoke, an unusual odour or strange noise is emitted by the device: unplug the mains cable from the electrical outlet and consult the after-sales service or repair centre. Never attempt to make repairs your self, this could be potentially dangerous. ●Do not attempt to open or disassemble the device. This would expose you to dangerous voltages. ●The slots and openings of the device are intended for ventilation and to ensure its operation. To prevent overheating, these openings must not be obstructed or covered in any way, such as by newspapers, tablecloths or curtains. ●Always leave a minimum distance of 10 cm around the device for sufficient ventilation. ●Never push any object into the device through one of its openings, as it may come into contact with electrical components,which can cause an electric shock or fire. ●In case of thunderstorm or lightning, immediately unplug the mains cable from the wall outlet. ●Always turn off the device when not in use. Unplug the mains cable from the electrical outlet when the device will not be used for a long period of time. ●Unplug the device from the electrical outlet before cleaning. Do not use liquid or aerosol cleaners. Use a dry, soft cloth for cleaning.3 ●This device must only be connected to a mains network whose charac- teristics are identical to those shown on the device identification plate. ●If it is a class I appliance, the user's protection is grounded. The appli- ance must be connected to a power supply base with a connection to the protective earth. ●This device bears the logo , it is a class II electrical device in which the protection against electric shock is not based solely on main insulation but on double insulation. It does not have protec-tive grounding ●The mains plug must always be easily accessible. It serves as a mains disconnecting switch of the device. ●To disconnect the device from the mains, the plug must be disconnect- ed.Hold the mains cable by its plug. Do not pull on the mains cable to disconnect the plug. ●The mains cables must be routed so that they are not trampled upon or pinched by objects placed on or against them. ●If the mains cable of the device is damaged, it must be replaced by the manufacturer, its after-sales service or a similarly qualified person to avoid any danger. ●The device must not be exposed to dripping or splashing water,moisture or liquids. ●Do not place the device near water, for example in a bathroom or near a sink. ●No objects filled with liquids such as vases should be placed on or above the device. ●Never touch the mains cable with wet hands, this could cause a short circuit or electric shock. ●To avoid the risk of fire, do not place sources of open flames, Such as lighted candles, or heat sources such as radiators, on or near the device.The device is intended for use only in a temperate climate. ●If smoke, an unusual odour or strange noise is emitted by the device: unplug the mains cable from the electrical outlet and consult the after-sales service or repair centre. Never attempt to make repairs your self, this could be potentially dangerous. ●Do not attempt to open or disassemble the device. This would expose you to dangerous voltages. ●The slots and openings of the device are intended for ventilation and to ensure its operation. To prevent overheating, these openings must not be obstructed or covered in any way, such as by newspapers, tablecloths or curtains. ●Always leave a minimum distance of 10 cm around the device for sufficient ventilation. ●Never push any object into the device through one of its openings, as it may come into contact with electrical components,which can cause an electric shock or fire. ●In case of thunderstorm or lightning, immediately unplug the mains cable from the wall outlet. ●Always turn off the device when not in use. Unplug the mains cable from the electrical outlet when the device will not be used for a long period of time. ●Unplug the device from the electrical outlet before cleaning. Do not use liquid or aerosol cleaners. Use a dry, soft cloth for cleaning.4 CAUTION:TO AVOID RISK OF INJURY OR DAMAGE TO THE PRODUCT OR OTHER EQUIPMENT: ●This product is intended for household and personal use only. Do not use this product for commercial, industrial or other purposes. ●Do not subject the product to strong shocks, extreme temperatures or direct sunlight for prolonged periods. ●Keep the product away from magnetic objects, motors and transformers. ●Do not use the product outdoors, regardless of weaths conditions. ●Install the device only on a stand (furniture, wall..., that can support its weight safely. ●WARNING: Never place a TV in an unstable place. This can fall,causing i njuries or even the death of a person. Many injuries,especially in the case of children, can be avoided by taking simple precautions such as: －The use of furniture or stands recommended by the TV manufacturer. － The exclusive use of furniture that can support the weight of the TV safely. － Make sure that the device does not protrude from the edge of the furniture on which it is placed. －Never place the device on a tall piece of furniture (e.g. cabinets or bookcas- es) without attaching both the furniture and the device to a suitable stand. － Do not place the device on a trolley or on a stand that is not stable. Do not install the device on any fabric or other materials placed between its base and the supporting furniture. The device could fall and be damaged or seriously injure a person. －Do not use or watch the TV while driving. This is dangerous, and illegal in some countries. －Explain to children the dangers they face when climbing on the furniture to reach the device or its controls. － If you keep this device and change the location, you should apply the same considerations. －CAUTION: to avoid accidents, this device must be securely attached to the floor or wall according to the installation instructions.5 ●This product is intended for household and personal use only. Do not use this product for commercial, industrial or other purposes. ●Do not subject the product to strong shocks, extreme temperatures or direct sunlight for prolonged periods. ●Keep the product away from magnetic objects, motors and transformers. ●Do not use the product outdoors, regardless of weaths conditions. ●Install the device only on a stand (furniture, wall..., that can support its weight safely. ●WARNING: Never place a TV in an unstable place. This can fall,causing i njuries or even the death of a person. Many injuries,especially in the case of children, can be avoided by taking simple precautions such as: －The use of furniture or stands recommended by the TV manufacturer. － The exclusive use of furniture that can support the weight of the TV safely. － Make sure that the device does not protrude from the edge of the furniture on which it is placed. －Never place the device on a tall piece of furniture (e.g. cabinets or bookcas- es) without attaching both the furniture and the device to a suitable stand. － Do not place the device on a trolley or on a stand that is not stable. Do not install the device on any fabric or other materials placed between its base and the supporting furniture. The device could fall and be damaged or seriously injure a person. －Do not use or watch the TV while driving. This is dangerous, and illegal in some countries. －Explain to children the dangers they face when climbing on the furniture to reach the device or its controls. － If you keep this device and change the location, you should apply the same considerations. －CAUTION: to avoid accidents, this device must be securely attached to the floor or wall according to the installation instructions. CAUTION:TO AVOID EYE HAZARDS: USE AND HANDLING OF BATTERIES: ●It is best to have soft indirect lighting to watch TV. Avoid completely dark environments and any reflection on the screen, as these can cause eyestrain. ●CAUTION: danger of explosion if the batteries are not inserted correctly or if they are replaced by a non-similar or incompatible model. ●Replace the batteries only with batteries of the same type AAA/LR03. ● Batteries must not be exposed to excessive heat such as that from the sun, fire or similar origin. ●Never throw batteries into fire and never expose them to heat sources. ●Do not mix different types of batteries,or new and used batteries. ●The batteries must be inserted according to the polarities indicated on the battery and in the battery case of the remote control. ●Used batteries must be removed from the remote control. ●The batteries must be disposed of safely at the assigned specific collection points to preserve the environment.Follow the disposal instructions indicated on the batteries and at the collection points. ●Keep batteries out of the reach of children and animals. Only adults are capable of handling the batteries. For installation,handling,cleaning and disposal of the device, refer to the following chapters of the user manual.6 ●CAUTION: danger of explosion if the batteries are not inserted correctly or if they are replaced by a non-similar or incompatible model. ●Replace the batteries only with batteries of the same type AAA/LR03. ● Batteries must not be exposed to excessive heat such as that from the sun, fire or similar origin. ●Never throw batteries into fire and never expose them to heat sources. ●Do not mix different types of batteries,or new and used batteries. ●The batteries must be inserted according to the polarities indicated on the battery and in the battery case of the remote control. ●Used batteries must be removed from the remote control. ●The batteries must be disposed of safely at the assigned specific collection points to preserve the environment.Follow the disposal instructions indicated on the batteries and at the collection points. ●Keep batteries out of the reach of children and animals. Only adults are capable of handling the batteries. For installation,handling,cleaning and disposal of the device, refer to the following chapters of the user manual. To avoid possible hearing damage, do not listen at a high sound level for a long time. Cadmium free; concentration values of Cadmium (Cd) by weight in any homogeneous material part of the display do not exceed 0,01 % as defined in Directive 2011/65/EU. This symbol indicate direct current (DC). This symbl indicate alternative current (AC). This symbol indicate “Indoor use only”. EU Declaration of Confoemity: Market Miaker Brand Licensing hereby declares that the device complies with the essential requirements and other relevant provisions of Directive 2014/53/EU.The Declaration of Conformity can be viewed at the following address: http://www.mms-support.net/OTA/ECD_MMBL_CEQLED50SA21B7.pdf7 CONTENTS

This user guide, any updates or new versions are available on our website. 2011/65/EU (Restriction of the use of certain hazardous substances in electronic equipment) The CE marking indicates that the product meets the main requirements of the European Directives 2014/35/EU (Low Voltage), 2014/30/EU (Electromagnetic Compatibility), 2014/53/EU (Radio Equipment), 2011/65/EU (Restriction of the use of certain hazardous substances in electronic equipment).

4. Press to open the You Tube.

5. Subtitle: To turn on subtitles in DTV mode

6. (stop): Press to stop multimedia playback

7. To disable or enable the speaker sound output.

8. (Reverse):Reverse Playback rapidly.

9. (Forward):Advance playback rapidly.

10. (Play/Pause) :Start playback or Pause playback.

14. ARROWS: Navigate on-screen menu,OK to confirm

20. CH+/CH- : To access the next or previous channels

To access the next or previous Media pictures, videos, audios.

21. NUMBER KEY: For direct access to channels

22. INFO: Display channel information

23. : Jumps to last viewed channel

24. : Operations according to the

prompt within menu or while watching TV.12

II.THCHNICAL　SPECIFICATIONS

These specifications are subject to change without notice. The Adopted Trademarks HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries. Article number

Remote control power supply 3V (2 x LR03/AAA 1.5V batteries not included USB ports voltage and current 5V 0.5A Speaker Built-in 2 x 10W Inputs HDMIx4,ANT,CI,USBx3,RJ45,AV IN Outputs Optical,Headphones USB functions

Energy efficiency class

0.5W Power consumption in off-mode

86 kWh/1000h 86 kWh/1000h3840 px2160 px125 cm 49″ Continental EdisonCEQLED50SA21B714 III.INSTALLATION A.Unpacking Your TV should be unpacked and handled by 2 people, to avoid any risk of deformation or impact on the LED display. Start by preparing a flat surface covered with a soft, thick fabric (a blanket, for example). The prepared surface area must be larger than the size of the TV. This will allow the TV to be laid flat with the LED screen facing the floor. Before removing the TV from its packaging, read the sections "Wall Mounting" and "Stand Legs Installation" to prepare yourself for the installation operation you have chosen. Remove the TV from its packaging by lifting it vertically, then place the TV screen flat on the previously protected flat surface so that either the stand legs or a wall mounting bracket(not included) can be attached. Packaging materials - The packaging cardboard is recyclable. - The materials marked with the symbol are recyclable. - >PE<=polyethylene; >PS< = polystyrene; >PP< = polypropylene; ... This means that they can be recycled by disposing of them in appropriate collection containers. - Other packaging elements (adhesive,fasteners,etc.)should be disposed of with household waste. For more information:www.quefairedemesdechets.fr B. Wall mounting

• Contact a professional for assistance with the wall mounting of your TV set. We cannot be held liable for any damage or injury caused by the mounting of the TV set.

• The TV must be mounted on a vertical wall. This TV is not intended for installation on a sloped wall.

• The TV must be tumed off and disconnected from the power supply when you mount it to the wall. Failure to comply with these precautions may result in electric shock or electrocution.

• The mounting bracket must correspond to the centre distances indicated below. NOTE: The screws supplied are used for fixing the stand legs only. If you want to mount the TV on a wall, contact a professional to find out how to install a wall bracket. Rear view of your TV set15

C.Installing the stand legs Your TV set comes with uninstalled stand legs. Before using this TV as a free-standing unit on a furniture, install the stand legs as shown below. Step 1 Place the TV flat, with the screen facing down, on a flat surface covered with a soft, thick cloth to prevent damage. The bottom edge of the TV should protrude slightly from the edge of the flat surface, to allow the stand legs to be fixed without damaging the LED display. Step 2 Align the bottom of the TV with the stand legs until they are fully in place (aligned mounting holes). Step 3 Tighten the supplied screws with a screwdriver. NOTE：unplug the TV from the AC outlet when installing or removing the TV legs. Contact one of our distributors to learn more about how to install and remove the TV legs.Antenna Outdoor antenna amplifier Indoor antenna amplifier Power plug of antenna amplifier 75 OHM antenna plug To power outlet

D. Basic connections ● Ensure all the cables are disconnected from the main unit before connecting to AC power source. ● Read through the instructions before connecting other equipments.

Install external antenna into antenna jack for best picture.OPTICAL

HEADPHONE18 RJ 45 and HDMI

USB USB reticle The HDMI cable connects the computer to the TV, making the TV a monitor for the computer, capable of synchronizing images and sounds from the computer Connection cable or wireless antenna, watch TV DVD player Blu-ray disc player Digital Video Recorder,DVR computer ANT ANT

USB interface is used to and other USB devices (such as mobile hard disk, U disk, etc.), direct broadcast audio and video files in USB devices.Turn it also has a memory function, such as on a USB interface with the digital camera, another interface to connect mobile hard disk, you can easily move the photos from digital camera to hard disk.

OPTICALRJ 45 HDMI4 HDMI3 HDMI2AV IN

USB USB USB ANT Us RJ 45 that You can browse video on the Internet. Some TV sets can also download video on the Internet for watching at any time.19 This function is used for the remote control pair code. After the code is successful,you can use the Bluetooth remote control to operate the TV. If you don't need to use the Bluetooth remote control, you can press the BACK button to skip this step. Connect your Android phone to your TV, select Continue to continue the connection, and choose Skip to skip this step.

Press▼▲ to select the the Wifi to connect, press OK and enter the password to confirm the connection is successful. You can also try use Ethernet and skip select network. By accepting the Google Terms of Service to improve the product experience, select Accept to accept this condition.

Agree to Google to get the location information of your device to get more features,choose YES to accept." " By agreeing to automatically send diagnostic information to Google to improve discriminative power, choose YES to accept.

1.Your device is powered by Android TV and press the▶ button to select the browsing feature.

2. You can get more apps from Google

Play and press the▶button to go to the next screen.

3. Transfer photos and other content to the TV via the

built- in chromecast, press OK to complete the browsing. Press▼▲ to select the country of your device and press OK to confirm. Used to set your device' s password to ensure security and privacy. Press OK to pop up the soft keyboard, and use the remote control to enter the 4- digit password automacically jump to the next interface. IV．USE INITIAL SETUP The first you turn your TV, the setup wizard will guide you through setting up basic settings. Please according to the text tip to first time setup. Press▼▲ to select the system language and press OK to confirm the language.20 Confirm the password again and keep it consistent. Use the remote control to enter the password and complete the password confirmation. For selecting the mode, press key to select Home mode and press OK to confirm.

Confirm the selected mode again, select es to confirm the selected mode, and select o to return to the previous step. "Y " "N " P ▼▲to select whether to search, select can to search, select kip Scan to skip the search. ress "S " "S " P OK to complete the setup.ress P the OK button to agree to ( Disclaimer) . After setting is complete, You can watch TV. ress Let this device be detected as a Google Cast device and allow Google Assistant and other services to wake this device up to respond to Cast commands, even when on standby and the screen is off.

select the Tuner mode for searching, press ▼▲to select and press OK to confirm.21 HOME SCREEN Press the HOME button to go to the home page open the google assistant start a voice search or use keyboard search Among the applications installed on the TV, the icons for the favourite applications are shown inside here.(Favourite applications can be added/deleted/ changed its order by users.) Apps: Click to jump to Apps screen where all the installed applications are listed. Notification : Display the notifications. Inputs : Icon to select an input source. Network&Internet : Icon to Setup Network, Such as wifi. Settings : Various settings can be configured here. For details on the settings,see the next explanation. INPUT SOURCE 1.In the HOME interface,press▼▲◀▶to select th

. There are two ways to enter. First, in Live TV, press the menu button to display TV options, press▼▲ ◀▶select the settings menu and press OK to confirm. Second, in the HOME interface, press the ▶key to select the icon of the circular settings menu, press OK to confirm.

3. Press OK to enter setting.

. Press button to select what you want set.

2. Press OK button to adjust.

3. After finishing your adjustment, press OK button

to save and return to the previous menu.

③22 CHANNEL Channels :Display the scan sub- menu based on different Channel installation modes. Channel installati on mode:Select on- screen display channel sources. You can select the signal type.

automatic search platform interface of Antenna

Update Scan : Re- automatically search for frequency points outside the station. Analog Manual Scan : Manual ATV search station. After input the frequency point, you can select up or down search station. Sing le RF Scan : DTV manual search, left and right after selecting RF Channel,directly OK search. Cable

• Anten na:Set the signal type to antenna When set to Antenna, the TV can receive analog and digital (DVB-T/ DVB-T2)broadcasting signals.

• Cable :Set the signal type to cable When set to Cable, the TV can receive analog and QAM broadcasting signals

are the local operators,and the default Scan Mode is Advance;Others have Advance,Quick and Full Scan modes. Single RF Scan : manual search station.

Press UP/DOWN button to select Sign in or Skip. APPS In this menu,you can set the APP permissions,and read the app lists

1.Press button to select what you want set. 2.Press OK button to adjust. 3.After finishing your adjustment,Press BACK button to return to the previous menu.

DEVICE PREFERENCES In this menu,you can read the information and settings of TV. 1.Press▼▲button to select what you want set. 2.Press OK button to adjust. 3.After finishing your adjustment, Press BACK button to return to the previous menu. ABOUT24 DATE&TIME Automati c date&time -Press button to select the option then press OK button to enter the sub-menu. (Optional:Use network-provided time,Off)

TV auto power on :Press button to select the option then press OK button to choose ON/OFF.

Picture off :Press button to select the option then press OK button to turn off the TV.

Downmix Mode: Press button to select the option then press OK button to enter the sub-menu. (Optional:Stereo,Surround)

HOME SCREEN In this menu, you can set channels, apps, open source licenses.

▼▲button to select what you want set.

2. Press OK button to adjust.

3. After finishing your adjustment, Press BACK

button return to the previous menu. RETAIL MODE Retail mode: Press button to select the option then press OK button to choose ON/OFF. ▼▲27 GOOGLE In this menu, you can set searchable apps,safe search filter,block offensive words,open source licenses. 1.Press ▼▲button to select what you want set. 2.Press ok button to adjust. 3.After finishing your adjustment,Press BACK button return to the previous menu. CHROMECAST BUILT-IN In this menu, you can read the information and settings of Chromecast. 1.Press ▼▲button to select what you want set. 2.Press ok button to adjust. 3.After finishing your adjustment,Press BACK button return to the previous menu. SCREEN SAVER Screen saver : Press button to select the option then press OK button to enter the sub-menu.(Optional: Turn screen off, Backdrop,Colors).

Put device to sleep : Press button to select the

In this menu, you can pair Bluetooth devices. 1.Press the “ MENU ” and LEFT buttons at the bottom of the remote control for 5 seconds. 2.When the LED starts to flash, release it.The remote controller will send the pairing signal to the TV and display the information of the remote control on the right side of the screen. 3.Press the OK button to display the pairing.If the paired is displayed,the connection is successful. 4.If the couldn’t pair appears, the connection fails.Wait 30 seconds and then press the “ MENU ” and “ LEFT ” buttons at the bottom of the remote control for 5 seconds to repeat the previous steps 5.Press BACK button return to the previous menu.

USB flash drive, you can view the corresponding files in the USB fla sh drive. NOTE: The menu may be different depending on when you purchased the TV.29

V.MAINTENANCE AND CLEANING

Before servicing your TV, make sure it is turned off and the Power cable is disconnected. ●Wipe the TV with a soft, dry cloth. ●If the surface is very dirty, wipe it with a soft cloth slightly soaked in water. Then wipe again with a dry, soft cloth. ●Never insert objects or liquids into the ventilation openings of your TV. This could damage it , or even cause a short circuit or risk of electric shock. Never use alcohol, benzene, solvents or other chemicals .Do not compressed air to remove dust.30

VI.TROUBLESHOOTING TIPS

Some malfunction can be easily resolved. Before calling on the service department or a repair technician, consult the following information: Symptoms Solutions The TV does not tum on.

• Check the connection of the power supply cord.

• Carefully connect the power cord to another power outlet. No picture or picture of poor quality. Picture is not displayed in full screen.

• Make sure that the equipment is properly connected, especially the ANT antenna or cable from the source used.

• Try another channel.

• Check and adjust the image size option.

• Adjust the antenna or use another antenna.

• Check the contrast and brightness settings.

• Keep the TV away from potential sources of electromagne tic or radio interference.

• Perform a new automatic channel search. No sound, Its distorted, Poor sound quality.

• Disconnect the headphones.

• If audio equipment is connected, make sure it is properly connected.

• Check that the TV and stereo equipment is properly configured. Check the audio setting. Noise or other type of interference. Electronic equipment adjacent to the unit creates interference.

• Check the connections of the equipment cables.

• Move the TV or equipment concerned. The remote control does not work.

• Use the remote control at a distance of less than 6m.

• Remove any potential obstacles between the remote control and the IR receiver of the TV.

• Clean the lens of the remote control.

• Make sure the batteries are properly installed.

• The batteries may be dead. Replace them. Try again by pointing the remote control at the infrared receiver on the TV. The buttons do not work (TV or remote control).

• Disconnects the power cord and then carefully reconnect it （the TV may fail due to a storm, static electricity, etc.).31 Symptoms (continued) Solutions(continued) Only some channels are available.

• Check that your area is covered by the DTV broadcast.

• Check if channels are not blocked by the "Block program" settings.

• Checks to be performed in case of poor image quality. The USB stick does not work.

• Check the USB connection.

• The USB stick is not formatted.

• Make sure that the USB st ick is compatible and that multimedia data formats can be played back. The TV turns itself off.

• Check if the "Sleep Timer”, "Auto Standby” settings are not activated in the Time menu.

• If the TV is used as a PC monitor, check the PC's power and standby settings. Color dots appear on the screen.

• Although the LED display is manufactured with high- precision technology, black or colored dots (red, blue or green) may appear: this is a structural property of the display and not a malfunction.32

The warranty does not cover product wear parts, problem or damage resulting from:

1. Surface damage due to normal product wear and tear;

2. Defects or damage due to contact of the product with food or liquids and due

to corrosion caused by rust;

3. Any incident, misapplication, misuse, alteration, disassembly or unautho

4. Any improper maintenance operation, use not in accordance with the

instructions concerning the product or connection to an incorrect voltage;

5. Any use of accessories not supplied or approved by CONTINENTAL

EDISON. The warranty will be cancelled if the nameplate and/or product serial number is removed.33

This logo on the product means that it is an appliance whose treatment as waste falls within the framework of the European Directive 2012/19/EU on Waste Electrical and Electronic Equip- ment (WEEE), which requires that used rate and recycling of the materials they contain, and reduce the impact on the environment and human health. Thus, at the end of the life of this device, It must not be disposed of with unsorted household waste. It must be disposed of in the return and collection systems made available to you by local authorities (waste collection centres ) and distributors. As an end consumer , your role is essential in the reuse, recycling and other forms of recovery cycle of this Electrial and Electronic Equipment. You are required to use the selective collection systems available to you. Continental Edison-120-126 Quai de Bacalan-CS 11584-33000 Bordeaux Imported by: Market Maker Brand Licensing-79/81 Ancienne Route Nationale 7-69570 DARDILLY-Francewww.continentaledison.fr

CEQLED50SA21B7_IM_EN_042021_V1