GYE22HSKSS - Fridge GE - Free user manual and instructions
Find the device manual for free GYE22HSKSS GE in PDF.
📄
Document temporarily unavailable
The manual is currently being transferred to our new server. It will be accessible again in a few hours. Thank you for your patience.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | GE |
| Model | GYE22HSKSS |
| Product Type | Built-in Counter Depth Refrigerator (PC) |
| Overall Height | 69 7/8 po (177,5 cm) |
| Overall Width | 35 3/4 po (90,8 cm) |
| Overall Depth (with doors and handles) | 31 1/4 po (79,4 cm) |
| Power Supply | 115 V AC, 60 Hz, 15-20 A, grounded outlet |
| Required Water Pressure | 40-120 psi (275-827 kPa) |
| Water Filter Capacity | 170 gallons (643,5 L) or 6 months |
| Main Functions | Water and ice dispenser, automatic ice maker, LED lighting, temperature-controlled drawer, QuickSpace™ shelf, K-Cup® brewer (select models), WiFi Connect (select models) |
| Refrigeration | Temperature setting: refrigerator 37°F (3°C), freezer 0°F (-18°C); Turbo Cool and Turbo Freeze |
| Care and Cleaning | Clean exterior with mild detergent; interior with baking soda solution; do not use abrasive cleaners; wash glass shelves at room temperature |
| Safety | Anti-tip system by floor mounting; grounding required; hot water dispenser with safety button; control lock; Sabbath mode |
| Replacement Parts and Accessories | RPWFE filter cartridge; bypass plug (free on request); water connection kit |
| Warranty | 1 year parts and labor; 5 years sealed system (Profile models) |
| Country of Origin | Not specified in the manual |
Frequently Asked Questions - GYE22HSKSS GE
How to install the water filter?
The water filter is located on the left interior wall of the refrigerator. To install, align the cartridge (or bypass plug) with the cartridge holder with the word FRONT facing up. Push it in fully, then turn it a quarter turn clockwise until the red indicators are no longer visible. Purge the air by running 2 gallons of cold water for about 5 minutes before using the hot water dispenser.
Why is the ice maker not producing ice?
The ice maker may take 12 to 24 hours to produce the first ice cubes after installation. Check that the water supply is connected and the pressure is between 40 and 120 psi. Make sure the ice maker is turned on via the control panel. If the bin is full, the sensing arm stops production. Discard the first batches of ice.
How to adjust the refrigerator and freezer temperature?
Use the Fridge and Freezer buttons on the control panel. Press and release to display the current temperature, then press again to change it. The default settings are 37°F (3°C) for the refrigerator and 0°F (-18°C) for the freezer. Wait 24 hours for stabilization.
What to do if the water dispenser is not working?
After installation, there may be air in the lines. Press the dispenser paddle for at least 5 minutes to purge the air. Discard the first six glasses of water. If the problem persists, check that the water filter or bypass plug is properly installed and that the water supply is on.
How to clean the inside of the refrigerator?
Unplug the appliance. Use a solution of warm water and baking soda (1 tablespoon per liter of water). Rinse and dry. Do not clean glass shelves with warm water when they are cold to prevent breakage. Do not wash any plastic parts in the dishwasher.
How to activate Sabbath mode?
For models with style A controls, press and hold the Alarm and Light buttons simultaneously for 3 seconds. For styles B and C, press and hold Lock and Light for 3 seconds. Sabbath mode turns off interior lights and disables advanced features while maintaining cooling.
How to use the hot water dispenser safely?
The hot water dispenser can heat water up to 185°F (85°C). To avoid burns, use an insulated container (ceramic or foam). Never let a child use the dispenser. The button must be pivoted and pressed simultaneously. Always purge the air from the system with cold water before first using hot water.
How to remove and reinstall the refrigerator doors?
Unplug the appliance. Remove the hinge covers and disconnect the electrical connectors and water line (for the left door). Use a 3/8 in. ratcheting screwdriver to remove the top hinge screws, then lift the door to 90°. To reinstall, reverse the steps. Align the marks on the closing mechanism to ensure proper closure.
What is the recommended water pressure for the refrigerator?
Water pressure should be between 40 and 120 psi (275-827 kPa). If pressure exceeds 80 psi, install a pressure regulator. Too low or too high pressure can affect the operation of the dispenser and ice maker.
How to replace the refrigerator LED bulb?
The refrigerator compartment uses LED lighting that must be replaced by an authorized technician. If the lighting is not working, contact GE Appliances service at 1-800-432-2737 (United States) or 1-800-561-3344 (Canada). Do not attempt to replace the LEDs yourself.
User questions about GYE22HSKSS GE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Fridge in PDF format for free! Find your manual GYE22HSKSS - GE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. GYE22HSKSS by GE.