IAN 280335 - Folding workbench PARKSIDE - Free user manual and instructions

Product Type	Folding Workbench
Brand	Parkside
Model	IAN 280335
Dimensions (H x W x D)	122 x 66 x 146 cm
Maximum load capacity of worktop	150 kg
Maximum load capacity of pegboard	25 kg
Maximum load capacity of hooks	1 kg (for hooks ≤50 mm and >50 mm)
Materials	Pegboard (metal?), solid wood top, metal frame
Intended use	Private indoor use, DIY and hobbies
Wall mounting required	Yes, screwed to wall. Suitable for concrete or solid brick walls. For lightweight partitions, special hardware required.
Number of hooks included	24 hooks: 4 standard, 10 T-type, 10 V-type
Folding	Yes, foldable according to figures E to H in the manual
Adjustable feet	Yes, 4 feet to compensate for uneven floor
Package contents	1 pegboard, left and right fixings, left and right frames, wooden top, connectors, screws, 4 hooks, 10 T-hooks, 10 V-hooks, 4 feet, manual
Warranty	3 years from purchase date
After-sales service	Tel. [phone] (from abroad)
Cleaning and maintenance	Clean with a damp cloth and mild detergent. Do not use alkaline, acidic or solvent-based products.
Safety instructions	Do not sit or lean on. Check condition before use. Secure to wall. Keep children away. Do not use hooks longer than 150 mm.

Frequently Asked Questions - IAN 280335 PARKSIDE

How to assemble the Parkside IAN 280335 folding workbench?

Assembly is done following figures A to D in the manual. It is recommended to have two people. You will need a Phillips screwdriver and two 10 mm wrenches. For wall mounting, a 10 mm drill bit and power tool are required for concrete or solid brick walls.

What is the maximum load of the worktop?

The maximum load of the worktop is approximately 150 kg. Respect this limit to avoid damage or accident.

Do I need to mount the workbench to the wall?

Yes, the workbench must be screwed to the wall before use. The supplied wall plugs are suitable for concrete or solid brick walls. For other wall types (lightweight partitions), purchase special fixing hardware from a store.

How to fold and store the workbench?

Folding is done according to figures E to H in the manual. After folding, store the workbench in a dry place. Make sure it is securely locked in the folded position.

What tools are included in the delivery?

The delivery includes all fixing and hardware elements: screws, springs, washers, caps, as well as 24 hooks (4 standard, 10 T-type, 10 V-type) and 4 adjustable feet. Tools required for assembly (screwdriver, wrenches) are not supplied.

How to clean the workbench?

Clean the workbench with a damp cloth and a mild cleaning product. Never use alkaline, acidic or solvent-based detergents as they may damage the surfaces.

What to do if a part is missing or damaged?

Before assembly, check that all listed parts are present. If a part is missing or damaged, do not use the product and contact the after-sales service at [phone]. Keep your receipt as proof of purchase.

What is the warranty on this Parkside workbench?

The workbench has a 3-year warranty from the date of purchase. The warranty covers material and manufacturing defects, but not normal wear or damage due to improper use.

Can I use the workbench outdoors?

No, the workbench is designed exclusively for private indoor use (garage, basement, workshop). Outdoor use is prohibited and could damage the product.

What are the essential safety instructions?

Never sit on the workbench. Before each use, check that it is not damaged and that the wall fixings are secure. Keep children and animals away. Do not use hooks longer than 150 mm. Compensate for uneven floor with the adjustable feet.

USER MANUAL IAN 280335 PARKSIDE

List of pictograms used
	Please read the operating instructions!		Maximumload
	Observe the warnings and safety notices!		Dispose of the packaging and the product in an environmentally friendly manner!
	Danger to life and risk of accident for infants and children!

Folding Workbench

- Introduction

Congratulations on the purchase of your new product. You have selected a high quality product. The assembly and operating instructions are part of this product. Please read these assembly and operating instructions thoroughly before assembly and observe all instructions. These instructions contain important assembly and care information. Please retain these assembly instructions and instructions for use and hand them on to any future owner.

Intendeduse

Please read all assembly and operating instructions before using the product. Please retain these assembly and operating instructions carefully and hand them on to any future owner. This workbench is primarily intended for use by handymen, for hobbies and craftwork i.e. in garages and basements. Your tools may be conveniently hung up on the pegboard using the hooks supplied. Please observe the specified maximum loads in doing so. It is possible to attach and store bulky tools on the work surface. This workbench is only intended for private use indoors. Any other use or product modification is prohibited and will result in damage. Doing so can further result in danger to life and injury. The

manufacturer is not liable for damages due to improper use.

Partsdescription

B1 Pegboard
B2L Left wall bracket
B2R Right wall bracket
B3L Left underframe
B3R Right underframe
B4 Solid wood board
B5L Left connector
B5R Right connector
B6 Hexagonal screw M6 x 60
B7 Spring for hexagonal screw B6
B8 Cross-head screw M6 x 37
B9 Screw M6 x 15
B10 Wood screw M5 x 16
B11 Anchor
B12 Wood screw M4 x 20
B13 Plastic washer
B14 Plastic plug
B15 Compensating foot (height-adjustable)
B16 T-hook
B17 V-hook

- TechnicalData

Dimensions: 122 cm x 66 cm x 146 cm (W x D x H) max. load weight of work surface: approx. 150 kg max. load weight of hook with total length under 50 mm: approx. 1 kg

Introduction / Safety Notices

max. load weight of hook with total length over 50 mm: approx. 1 kg

max. load weight of pegboard: approx. 25 kg

- Scope of delivery

1 pegboard

1 left wall bracket

1 right wall bracket

1 left underframe

1 right underframe

1 solid wood board

1 left connector

1 right connector

4 hexagonal screws M6 x 60

4 springs for hexagonal screws B6

4 cross-head screws M6 x 37

2 screws M6 x 15

6 wood screws M5 x 16

4 anchors

2 wood screws M4 x 20

2 plastic washers

4 plastic plugs

4 compensating feet (height-adjustable)

10 T-hooks

10 V-hooks

1 set of assembly instructions

Safety Notices

MIRONING!

LIFE AND RISK OF ACCIDENT FOR INFANTS AND CHIL-

DREN! Never leave children unsupervised with the packaging materials. The packaging material represents a suffocation hazard. Keep this product well away from children. This product is not a toy.

- Check the workbench for damage before every use.

Caution: Only use this workbench if it has been screwed/secured to a wall beforehand.

The bolt anchors supplied for the purpose of securing the product to the wall are only suitable for concrete or solid brick walls. All other

walls such as lightweight walls require a special fixing material (not included in the scope of delivery). If necessary, consult a specialist retailer.

Caution: Protruding work pieces may cause the workbench to tip!

- Do not stand or sit on the product. There is a risk of injury.

■ Never modify or convert any of the product. Otherwise, property damage or injuries may occur.

This product may be used by children aged 8 years and up, as well as by persons with reduced physical, sensory or mental capacities, or lacking experience and/or knowledge, so long as they are supervised or instructed in the safe use of the product and understand the associated risks. Do not allow children to play with the product. Cleaning and user maintenance should not be performed by children without supervision.

- Check before assembly that all parts listed are included in the scope of delivery. Do not assemble or use the product if any parts are missing or damaged. Failure to observe this advice could result in injury.

■ Ensure that you have sufficient space in the assembly area to construct the product. Only assemble the workbench on an even surface.

Take care that you do not trap or crush your fingers while assembling the product.

- Do not exert force during assembly, otherwise, the work bench parts may become deformed and pose a risk of injury.

- Keep children and pets away from the work area while you are assembling the product.

- Check regularly that the hooks are installed securely and retighten the screws if necessary.

■ Ensure while positioning the hooks on the pegboard that they are mounted properly to prevent them from falling out.

■ Never use hooks which are over 150 mm in length.

- Contact your retailer or the manufacturer if you wish to use hooks which differ from the hooks supplied in terms of shape and length.

... / Assembly / Cleaning and storage / Disposal / Warranty and Service

■ Balance the workbench on uneven ground with the aid of the adjustable feet.
- Check the load-bearing capacity of the wall before mounting to the wall.
The maximum load weight of the work surface amounts to approx. 150 kg.
The maximum load weight of a hook with a total length under 50 mm amounts to approx. 1 kg.
The maximum load weight of a hook with a total length over 50 mm amounts to approx. 1 kg. The maximum load weight of the pegboard amounts to approx. 25 kg.

Assembly

Note: Familiarise yourself with the product prior to assembly. Carefully read the following assembly instructions and safety advice.

Incorrect assembly will void any warranty, particularly with respect to consequential damages.

Caution: Only use this workbench if it has been screwed/secured to a wall beforehand.

The bolt anchors supplied to secure the workbench to the wall are only suitable for concrete or solid brick walls. All other walls such as lightweight walls require a special fixing material (not included in the scope of delivery). If necessary, consult a specialist retailer.

Required tools:

1 cross-tip screwdriver
2 combination wrenches 10 mm

Note: To mount to a concrete or solid brick wall you will need a 10 mm masonry drill and a suitable power tool.

We recommend assembling this product with 2 people.

- Constructing the workbench

☐ Construct the workbench as depicted in Diagrams A to D.

Option Diagram BII

☐ Using the screws B8 the pegboard B1 may be mounted at a height. Use the mounting holes located at a higher level in the wall bracket for this purpose.

- Folding up the workbench

☐ Fold up the workbench as depicted in Diagrams E to H.

- Cleaning and storage

Do not use any solvent-based, alkaline or acidic cleaning agents as these could damage the product.
□ Clean the workbench with a damp, soft cloth and, if necessary, a mild detergent.
☐ Only store the product in a dry location.

- Disposal

The packaging is made from environmentally friendly materials which can be disposed of through your local recycling facilities.

Contact your municipality for information on how to dispose of your worn-out product.

• Warranty and Service

The product has been manufactured to strict quality guidelines and meticulously examined before delivery. In the event of product defects you have legal rights against the retailer of this product. Your legal rights are not limited in any way by our warranty detailed below.

Warranty and Service

The warranty for this product is 3 years from the date of purchase. Should this product show any fault in materials or manufacture within 3 years from the date of purchase, we will repair or replace it - at our choice - free of charge to you.

The warranty period begins on the date of purchase. Please keep the original sales receipt in a safe location. This document is required as your proof of purchase. This warranty becomes void if the product has been damaged or improperly used or maintained.

The warranty applies to faults in material or manufacture. This warranty does not cover product parts subject to normal wear, thus possibly considered consumables (e.g. batteries) or for damage to fragile parts, e.g. switches, rechargeable batteries or glass parts.

Please retain the receipt and item number, e.g. IAN 12345 as proof of purchase.