2042 - Detector FLUKE - Free user manual and instructions

Product type	Cable detector (cable locator)
Brand	Fluke
Model	2042
Power supply	6 batteries 1.5 V LR6 (AA)
Main functions	Detection of live and buried cables, circuit identification
Transmitter included	Yes, model 2042T
Compliance	EMC Directive 89/336/EEC, Low Voltage Directive 73/23/EEC
Safety	Follow warnings, danger zone identified
Package contents	1 detector, 1 transmitter 2042T, 6 batteries, 1 user manual
Dimensions (estimated)	200 x 80 x 40 mm
Weight (estimated)	500 g
Cleaning	Use a soft dry cloth
Repairability	Spare parts available from the manufacturer
Typical detection depth	Up to 2 meters
Display	Analog signal indicator
Protection	IP54 (estimated)
Operating temperature	0°C to 50°C
Warranty	1 year

Frequently Asked Questions - 2042 FLUKE

How to use the Fluke 2042 to locate a buried cable?

First connect the transmitter 2042T to the cable to be located, then turn on the receiver. Walk with the receiver over the suspected area. The audible signal and visual indicator will guide you to the cable.

What type of batteries to use?

Use 6 alkaline 1.5 V LR6 (AA) batteries. Do not use rechargeable batteries without consulting the manual.

What is the maximum detection depth?

The detection depth can reach up to 2 meters under ideal conditions, but it depends on the soil type and humidity.

Can the detector locate live cables?

Yes, the Fluke 2042 can detect live cables in passive mode. For active location, use the provided transmitter.

How to perform a function test?

Turn on the device and bring it near a known cable or use the transmitter nearby. The signal should be audible and the needle should move. If no signal, check the batteries.

What to do if the detector does not turn on?

First check that the batteries are correctly inserted and in good condition. Replace them if necessary. If the problem persists, contact Fluke after-sales service.

How to clean the device?

Use a soft dry cloth to clean the exterior. Do not use solvents or abrasive products.

Are there risks of electric shock?

Yes, if you work on live cables. Always follow safety instructions: wear insulating gloves and avoid direct contact with bare conductors.

How to interpret the audible signals?

A continuous and loud sound indicates direct proximity to the cable. An intermittent or weak sound means you are moving away. Use the visual indicator to confirm.

Where to find spare parts?

Spare parts are available from authorized Fluke dealers or directly on the manufacturer's website.

USER MANUAL 2042 FLUKE

© 2005 Fluke Corporation. All rights reserved. Printed in China.

References marked on instrument or in Users Manual

The description and operation of the additional transmitter 2042T is described in the 2042 Cable Locator Users Manual.
Warning of a potential danger, comply with Users Manual.
Caution! Dangerous voltage. Danger of electrical shock.
Conformity symbol, the instrument complies with the valid directives. It complies with the EMC Directive 89/336/EEC are fulfilled, it also complies with the Low Voltage Directive (73/23/EEC).
The Users Manual contains information and references, necessary for safe operation and maintenance of the instrument. Prior to using the instrument (commissioning / assembly) the user is kindly requested to thoroughly read the Users Manual and comply with it in all sections. Failure to read the Users Manual or to comply with the warnings and references contained herein can result in serious bodily injury or instrument damage.

Scope of supply

1 pc. FLUKE Cable Locator Transmitter
6 pc. Batteries 1,5V, IEC LR6
1 pc. Instruction Sheet

C 89/336/EEC 73/23/EEC

A 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27

2aunnaaunn

1 FLUKE

6 1.5 V, IEC LR03

1 nnnn 1 nnnnnae

Fluke Corporation

P.O.Box 9090

Everett WA

98206-9090

Fluke Europe B.V.

P.O.Box 1186

5602 B.D. Eindhoven

Netherlands