Tripp Lite PS615HG20AOEM - Power strip

PS615HG20AOEM - Power strip Tripp Lite - Free user manual and instructions

Find the device manual for free PS615HG20AOEM Tripp Lite in PDF.

📄 8 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Tripp Lite PS615HG20AOEM - page 1
View the manual : Français FR English EN
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Power Strip
Brand Tripp Lite
Model PS615HG20AOEM
Input Voltage 120 V AC
Frequency 60 Hz
Rated Amperage 15 A
Number of Outlets 6
Power Cord Length Approximately 1.8 m
Housing Material ABS Plastic
Intended Use Indoor Only
Protection Resettable Circuit Breaker
Grounding 3-Wire Grounded Plug
Warranty Limited Lifetime Warranty
Maintenance and Cleaning Unplug and wipe with a damp cloth (all-purpose cleaner)
Safety Do not use with extension cords or adapters that defeat grounding; do not overload
Spare Parts and Repairability Not user serviceable; contact Tripp Lite for replacement
General Information Complies with safety standards; annual inspection recommended

Frequently Asked Questions - PS615HG20AOEM Tripp Lite

How to reset the circuit breaker on the power strip?
Unplug excess equipment, then press the circuit breaker button to reset it. If the breaker trips again, reduce the load.
Can I use an extension cord or adapter with this power strip?
No, it is prohibited to use extension cords or adapters that eliminate grounding. Plug the power strip directly into a grounded outlet.
Does this power strip offer surge protection?
No, this model does not have surge protection. It is a standard power strip with a circuit breaker.
What is the maximum load supported by the power strip?
The total load must not exceed 15 A (rated amperage). Each outlet can handle up to 15 A, but the sum of all outlets must not exceed 15 A.
Can I use this power strip outdoors?
No, the power strip is designed for indoor use only. Do not expose it to moisture or conductive contaminants.
How to clean the power strip?
Unplug it and wipe it with a clean cloth slightly dampened with an all-purpose cleaner. Do not spray liquid directly.
What to do if the power cord is damaged?
Do not use the power strip. Contact Tripp Lite for a warranty replacement or purchase a new product.
Is this power strip suitable for medical equipment?
It is not recommended for life support equipment. Consult the safety instructions in the manual.
What to do in case of a thunderstorm?
Never plug or unplug electrical equipment during a thunderstorm. Unplug the power strip from the wall outlet if possible.
How to obtain warranty service?
Contact Tripp Lite at 1111 W. 35th Street, Chicago, IL 60609 or visit www.tripplite.com/support before sending the device. You are responsible for shipping to Tripp Lite; return shipping is free.

User questions about PS615HG20AOEM Tripp Lite

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Power strip in PDF format for free! Find your manual PS615HG20AOEM - Tripp Lite and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PS615HG20AOEM by Tripp Lite.

USER MANUAL PS615HG20AOEM Tripp Lite

Register your product for quicker service and ultimate peace of mind.

You could also win an ISOBAR6ULTRA surge protector— a \$100 value!

Tripp Lite PS615HG20AOEM - 1

Tripp Lite PS615HG20AOEM - 2

text_image QR code image containing encoded data, no visible human-readable text

www.tripplite.com/warranty

Tripp Lite PS615HG20AOEM - 3

text_image TRIPP·LITE

Tripp Lite PS615HG20AOEM - 4

Manufacturing Excellence.

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

Copyright © 2017 Tripp Lite. All rights reserved.

Tripp Lite PS615HG20AOEM - 5

IMPORTANT SAFETY INSTRUCTIONS. SAVE THESE INSTRUCTIONS.

WARNING

Use of this equipment in life support applications where failure of this equipment can reasonably be expected to cause the failure of the life support equipment or to significantly affect its safety or effectiveness is not recommended. Do not use this equipment within oxygen-enriched atmospheres, or within 0.3 m of a point at which an oxygen-enriched atmosphere is intentionally vented.

CAUTION

DO NOT connect to an ungrounded outlet. DO NOT use with extension cords or adapters that eliminate the connection to ground. The power strip is designed for indoor use only. Install the power strip away from heat emitting appliances such as radiators or heat registers. Do not install where excessive moisture or other conductive contaminants are present. Never install electrical wiring during a lightning storm.

Installation

1 Connect Your Power Strip to Your AC Power Line

Plug the power cord into a utility outlet. The power strip's power cord should only be connected to a standard 3-wire grounded 120V AC 60 Hz outlet.

2 Connect AC Equipment to Your Power Strip

Plug the AC power cords of your equipment into your power strip. Do not use extension cords or adapters that eliminate the connection to ground. DO NOT OVERLOAD your power strip. Each outlet can handle a load of up to the model's amp rating, but do not exceed a total load of more than the model's amp rating for all outlets. If the circuit breaker trips, outlets will cease to provide power. Reduce the load on the power strip down to your unit's amp rating by unplugging excess equipment, then depress the circuit breaker button to reset and restore power.

Power Strip Care and Maintenance

Warning: Do not spray with liquid cleaning products.

  • To clean, unplug unit and wipe with a clean cloth. Cloth may be dampened with all-purpose cleaner.
  • Check Circuit Breaker (CB) status. Normal operation requires CB be depressed.
  • Ensure mechanical integrity of case.
  • Ensure mechanical integrity of power cord. It should be free of cuts, frays, and exposed wires/conductors.
  • Tripp Lite recommends annual inspection of its products when they are used in a typical hospital/medical/healthcare/assisted living environment.

Warranty and Product Registration

Limited Lifetime Warranty

Seller warrants this product, if used in accordance with all applicable instructions, to be free from original defects in material and workmanship for its lifetime. If the product should prove defective in material or workmanship within that period, Seller will repair or replace the product, at its sole discretion. Service under this Warranty can only be obtained by Buyer delivering or shipping the product (with all shipping or delivery charges prepaid) to: Tripp Lite, 1111 W. 35th Street, Chicago, IL 60609. Seller will pay return shipping charges. The warranties of all TRIPP LITE surge protectors are null and void if they have been connected to the output of any UPS system. The warranties of all TRIPP LITE UPS Systems are null and void if a surge protector has been connected to its output receptacles. Visit www.triplite.com/support before sending any equipment back for repair.

THIS WARRANTY DOES NOT APPLY TO NORMAL WEAR OR TO DAMAGE RESULTING FROM ACCIDENT, MISUSE, ABUSE OR NEGLECT. SELLER MAKES NO EXPRESS WARRANTIES OTHER THAN THE WARRANTY EXPRESSLY SET FORTH HEREIN. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ALL IMPLIED WARRANTIES, INCLUDING ALL WARRANTIES OF MERCHANTABILITY OR FITNESS, ARE LIMITED IN DURATION TO THE WARRANTY PERIOD SET FORTH ABOVE; THIS WARRANTY EXPRESSLY EXCLUDES ALL INCIDENTAL AND CONSEQUENTIAL DAMAGES. (Some states do not allow limitations on how long an implied warranty lasts, and some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This Warranty gives you specific legal rights, and you may have other rights which vary from jurisdiction to jurisdiction).

WARNING: The individual user should take care to determine prior to use whether this device is suitable, adequate or safe for the use intended. Since individual applications are subject to great variation, the manufacturer makes no representation or warranty as to the suitability or fitness of these devices for any specific application.

Product Registration

Visit www.tripplite.com/warranty today to register your new Tripp Lite product. You'll be automatically entered into a drawing for a chance to win a FREE Tripp Lite product!*

* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.

Regulatory Compliance Identification Numbers

For the purpose of regulatory compliance certifications and identification, your Tripp Lite product has been assigned a unique series number. The series number can be found on the product nameplate label, along with all required approval markings and information. When requesting compliance information for this product, always refer to the series number. The series number should not be confused with the marketing name or model number of the product.

Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice.

Tripp Lite PS615HG20AOEM - Regulatory Compliance Identification Numbers - 1

text_image TRIPP·LITE

Tripp Lite PS615HG20AOEM - Regulatory Compliance Identification Numbers - 2
Manufacturing Excellence.

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

Manufacturing Excellence.

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Tripp Lite

Model : PS615HG20AOEM

Category : Power strip