Light Tab 2 - Tablet ZTE - Free user manual and instructions

USER MANUAL Light Tab 2 ZTE

(may already be inserted)

3. Install the battery

Notes: microSD logo is a trademark of the SD Card Association.

4. Replace the cover 5. Charge up7

1. To power on your device, hold Power Key.

2. To power off your device, hold Power Key to get the phone options, select

the Power off option, and then tap OK. Switching Your V9A to Sleep Mode Sleep Mode suspends your device to a low-power-consumption state while the display is off to save battery power. Your device also goes into Sleep Mode automatically when you leave it idle after a certain period of time. Press Power Key. Waking Up Your V9A from Sleep Mode

1. Press Power Key to activate your screen display.

2. Drag the unlock icon to the right.8

Product Safety Information Read the Safety Information section on this page. Do not use while re-fuelling. Do not use hand-held while driving. This device may produce a bright or ashing light. Small parts may cause a choking hazard. Do not dispose of it in a re. This device may produce a loud sound. Avoid contact with magnetic media. Keep away from pacemakers and other personal medical devices. Avoid Extreme Temperatures. Switch off when instructed in hospitals and medical facilities. Avoid any contact with liquid, keep it dry.9 Switch off when instructed in aircrafts and airports. Do not attempt to disassemble. Switch off in explosive environments. Do not rely on this device for emergency communications. Only use approved accessories.10 V9A 快速指南11

EC DECLARATION OF CONFORMITY

It is hereby declared that following designated product: Product Type: TABLET Model No: V9A Complies with the essential protection requirements of the Radio and Telecommunication Terminal Equipment Directive (EC Directive 1999/5/EC) and the Electromagnetic Compatibility Directive (2004/108/EC). This declaration applies to all specimens manufactured identical to the samples submitted for testing/evaluation. Assessment of compliance of the product with the requirements relating to the Radio and Telecommunication Terminal Equipment Directive (EC Directive 1999/5/EC) was performed by American TCB (Notied Body No.1588), based on the following standards:158 Safety EN 60950-1:2006/A11:2009 EMC EN 301 489-1 V1.8.1; EN 301 489-3 V1.4.1; EN 301 489-7 V1.3.1; EN 301 489-17 V2.1.1; EN 301 489-24 V1.5.1; EN 55013:2001+A2:2006; EN 55020:2007; Radio EN 301 511 V9.0.2; EN 301 908-1 V4.2.1; EN 301 908-2 V4.2.1; EN 300 328 V1.7.1; EN 300 440-1 V1.6.1; EN 300 440-2 V1.4.1; Health EN 62311:2008; EN 62209-2:2010 EN 50332-1:2000; EN 50332-2:2003 This declaration is the responsibility of the manufacturer: ZTE Corporation ZTE Plaza, Keji Road South, Hi-Tech, Industrial Park, Nanshan District,Shenzhen, Guangdong, 518057, P.R.China Authorised person signing for the company: Xu feng Quality Director Of ZTE Corporation Name in block letters & position in the company Shenzhen, 4

August 2011 Place & date Legally valid signature