Mr. Frost - Décoration de Noël gonflable OneConcept - Free user manual and instructions

USER MANUAL Mr. Frost OneConcept

Congratulations on purchasing this product. Please read and follow these instructions, in order to avoid damaging the item. We do not cover any damages that may arise from improper use of the item or the disregard of the safety instructions.

Important Safety Advice

• Read all instructions before using.
• To protect against a fire, electric shock or personal injury, do not immerse cord, electric plugs or device in water or other liquids.
• Do not expose the appliance to extreme temperatures. The appliance shall be used in moderate climates.
• The use of attachments that are not recommended by the appliance manufacturer may result in fire, electric shock or personal injury.
• Do not open the unit by removing any cover parts. Do not attempt to repair the unit. Any repairs or servicing should be done by qualified personell only.
• Only qualified persons may perform technical work on the product. The product may not be opened or changed. The components cannot be serviced by the user. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications.
• The appliance is not a toy. Do not let children play with it. Never let children insert foreign objects into the appliance.
• Never clean the surface of the device with solvents, paint thinners, cleansers or other chemical products. Instead, use a soft, dry cloth or soft brush.
• Save these instructions.

Small objects

Keep small objects (i.e. screws, mounting material, memory cards etc.) and packaging out of the range of children. Do not let Children play with foil. Choking hazard!

Transporting the device

Please keep the original packaging. To gain sufficient protection of the device while shipment or transportation, make sure to put it back in its original packaging.

Cleaning the surface

Do not use any volatile liquids, detergents or the like. Use a clean dry cloth.

Assembly

• Remove the item from the packaging and place it in a clean, open area free from obstruction or debris. Roll out fabric and lay out the item.
• Make sure the zip on the bottom of the item is closed.
• Make sure the fan located on the bottom of the unit is clear of fabric and free of obstruction.
• Connect the cable of product with the power adapter and screw firmly, then plug transformer into the socket with correct power to inflate the item.

• Secure the stakes into the ground and fasten the nylon tethers to the stakes or other things and the item.
• To replace broken bulb, open the zip and take out the broken bulb and replace new same specification bulb, then close the zip again. Make sure when replace the bulb, it must disconnect with the power.

Technical Data

10029230	Height: 240cm, power input: 12V, lamps: 4
10029231	Height: 240cm, power input: 12V, lamps: 4
10029232	Height: 240cm, power input: 12V, lamps: 3
10029233	Height: 250cm, power input: 12V, lamps: 5
10029234	Height: 120cm, power input: 12V, lamps: 1
10029235	Height: 180cm, power input: 12V, lamps: 1

Environment Concerns

According to the European waste regulation 2002/96/EG this symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will hep prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local council or your household waste disposal service.

Declaration of Conformity

Manufacturer: Chal-Tec GmbH, Wallstraße 16, 10179 Berlin, Germany.

This product is conform to the following European directives:

2014/30/EU (EMC)

2011/65/EU (RoHS)

Chere cliente, cher client,