ROWENTA Silence Force Extreme Compact RO5787 - Vacuum Cleaner

Silence Force Extreme Compact RO5787 - Vacuum Cleaner ROWENTA - Free user manual and instructions

Find the device manual for free Silence Force Extreme Compact RO5787 ROWENTA in PDF.

📄 43 pages English EN 💬 AI Question
Notice ROWENTA Silence Force Extreme Compact RO5787 - page 9
Manual assistant
Powered by ChatGPT
Waiting for your message
Product information

Brand : ROWENTA

Model : Silence Force Extreme Compact RO5787

Category : Vacuum Cleaner

Download the instructions for your Vacuum Cleaner in PDF format for free! Find your manual Silence Force Extreme Compact RO5787 - ROWENTA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Silence Force Extreme Compact RO5787 by ROWENTA.

USER MANUAL Silence Force Extreme Compact RO5787 ROWENTA

  • This appliance is not intended to be used by persons (including children) with reduced physical, sensory or mental capacities or lack of experience and knowledge, unless they are supervised or have been given instructions beforehand concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure they do not play with the appliance.
  • This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. Keep the appliance and its cord away from children.
  • Do not use the appliance if: the cord is damaged. In order to avoid all danger, the cord winding system and the cord itself of your vacuum cleaner must necessarily be replaced by a Rowenta Authorized Service Centre only. 1 • Conditions of use Your vacuum cleaner is an electrical appliance: it must only be used under normal operating conditions. Use and store the appliance out of the reach of children. Never leave the appliance unattended when it is switched on. Keep the nozzles and tube ends well away from eyes and ears. Do not vacuum damp surfaces, where there is water or liquids whatever their nature, hot substances, ultrafine substances (plaster, cement, ashes...), large sharp debris (glass), harmful products (solvents, paint strippers...), chemical products (acids, cleaning agents...), inflammable and explosive products (petrol or alcohol based). Never immerse the appliance in water, splash water onto it or store it outdoors. Do not use the appliance if it has been dropped and shows visible signs of damage or signs of not functioning properly. In this case, do not open the appliance but send it to your nearest Approved Service Centre or contact Rowenta Customer Services. 2 • Electrical power supply Make sure that the operating voltage (voltage) of your vacuum cleaner is the same as your supply voltage. Turn off and unplug the appliance by removing the power plug, without pulling on the power cord: - immediately after use, - before each time you change the accessories, - before cleaning, maintaining or changing the filter. 3 • Repairs Repairs should only be carried out by specialists using original replacement parts. Repairing an appliance oneself can be dangerous for the user, and will invalidate the guarantee. SAFETY INSTRUCTIONS

SFE_COMPACT_8L_EO_748296_748296 11/04/14 09:20 Page67 1 • Removing packaging Unpack your appliance and remove any unwanted stickers, Keep your guarantee form and read the instructions carefully before using your appliance for the first time. 2 • Advice and precautions Each time before use, the power cord must be unwound completely. Do not jam it and do not allow it to rub against sharp edges. If you’re using an electrical extension, check that it is in perfect condition and that it is suited to the power of your vacuum cleaner. Never unplug the appliance by pulling on the power cord. Never operate the vacuum cleaner without a bag in it and without its filtration system (cassette). For your peace of mind your vacuum cleaner is fitted with two safety check systems: for the bag (13 & 14) and for the (H)EPA filter cassette (16). Do not move the vacuum cleaner by pulling on the power cord, the appliance must be moved using its carrying handle. Do not use the power cord for lifting the appliance. Switch off and unplug your vacuum cleaner each time you’ve finished using it. Always switch off and unplug your vacuum cleaner before maintaining or cleaning it. Only use original Rowenta or Wonderbag bags and filters. Only use Rowenta original accessories. Check that all the filters are correctly in place. If you experience difficulties getting hold of the accessories and filters for this vacuum cleaner, please contact Rowenta customer services.

BEFORE USING FOR THE FIRST TIME

Thanks to the exclusive ROWENTA EXTREME SILENCE SYSTEM we promise you’ll notice just how much quieter your vacuum cleaner is.

Electronic power switch 10 a – Vertical parking

– Horizontal parking

Bag support for Wonderbag* bag or synthetic bag*

Bag in vacuum cleaner sensor

(H)EPA* filter cassette compartment

(H)EPA* filter cassette sensor 17 a - (H)EPA* filter cassette (ref. ZR002901) for Wonderbag* bags

- (H)EPA* filter cassette (ref. ZR005201) for synthetic bags* 18 a - Wonderbag* UNIVERSAL bag (Original, Mint Aroma, Allergy Care ref. WB4xxx)

- 2 position button: brush in retracted position for rugs and carpets / brush in advanced position for parquets and smooth floors.

Nozzle with removable brush* a - use on smooth surfaces with crevices b - use on parquet

  • Depending on models: either equipment specific to cer- tain models or available as an optional accessory. SFE_COMPACT_8L_EO_748296_748296 11/04/14 09:20 Page78 1 • Assembling the elements of the appliance Push the flexible hose into the vacuum inlet (Fig.1) and turn until it locks. To remove it, turn in the opposite direction and pull.
  • Push the metal telescopic tube into the end of the power nozzle until you hear a locking ‘click’ (Fig.2) (to release it, push the locking button on the tube and remove it).
  • Push the all floor type nozzle (22) into the end of the metal telescopic tube until you hear a locking ‘click’ (Fig.3) (to release it, push the locking button on the nozzle and remove it).
  • Adjust the telescopic metal tube to the required length using the telescopic system (TELESCOPIC SYSTEM) (Fig.4) Fit the appropriate accessory to the end of the metal telescopic tube or the power nozzle: - For rugs and carpets: use the all floor type nozzle in the retracted brush nozzle position or the Turbobrush* (fibres and animal hairs).: - For smooth surfaces and smooth surfaces with crevices (such as tiled floors): use the all-surface nozzle (22) with the brush extended or, for better results, use the smooth surface nozzle* (27.a*) without the removable brush. - For fragile surfaces, such as parquet, it is recommended to use the standard parquet nozzle (25*) or the nozzle with a line of bristles (27b*) - For corners and hard to reach spots: use the telescopic crevice tool*. - For furniture and fragile surfaces: use the brush built into the power nozzle (EASY BRUSH) or the upholstery nozzle*. 2 • Plugging in the power cord and switching on the appliance Unwind the power cord completely, plug in your vacuum cleaner and press on the On/Off button (Fig.7). Remark: you can use your vacuum cleaner in the horizontal position (sleigh position) but also in the vertical position, notably when you are vacuuming the stairs or removing dust from the curtains. Adjust the suction power: ⇨using the electronic power control (Fig.8) ⇨with the manual power nozzle switch (Fig.9)
  • Position (MIN) for vacuuming delicate fabrics (net curtains, textiles)
  • Position (Medium) for everyday vacuuming for all types of floors, which are only slightly dirty
  • Position (MAX) for vacuuming hard floors and very dirty rugs and carpets. 3 • Storing and carrying your vacuum cleaner After use, switch off your vacuum cleaner by pressing the On/Off switch and unplug it (Fig.10). Rewind the power cord by pressing the power cord rewind button (Fig.11). In the vertical position place the nozzle in the parking position (Fig.12). This allows you to carry and store your vacuum cleaner when it is in the parking position (Fig.13).

IMPORTANT Always switch off and unplug your vacuum cleaner before changing the accessories. COMFORT TIPS ERGO COMFORT SILENCE Chain Comfortable to use, the ERGO COMFORT SILENCE range has been designed to make using your vacuum cleaner an easier and more enjoyable experience. So that you can keep an upright position and avoid bending your back, make sure you:

1. Adjust the length of the metal telescopic tube

ERGO COMFORT SILENCE to suit your body build (Fig.5).

2. Place your second hand in front of the power

nozzle handle ERGO COMFORT SILENCE (Fig.6).

  • Depending on models: either equipment specific to cer- tain models or available as an optional accessory. IMPORTANT: The nozzle for smooth surface with crevices 27.a* is used to measure performance associated to the energy label. This nozzle allows you to optimise the dust-collection performance of your appliance on smooth surfaces with crevices. IMPORTANT Never operate your vacuum cleaner without its bag and without its filtration system (cassette).

SFE_COMPACT_8L_EO_748296_748296 11/04/14 09:20 Page8The air we breathe contains particles that may be allergens: mite larvae and droppings, mould, pollen, smoke and animal residues (hair, skin, saliva, urine). The smallest particles penetrate deep into the respiratory system where they can cause inflammation and lung impairment.(H)EPA filters (High Efficiency Particulate Air) are used to filter out the smallest particles. With the (H)EPA filter, the air released back into the room is healthier than the air that is vacuumed. 1 • Changing the bag The change bag light tells you that the bag is full or saturated. If you notice that your vacuum cleaner is not working as well as it should be, turn the power up to maximum and hold the lifted nozzle above the floor. If the light stays red, replace the bag. a) If your vacuum cleaner is fitted with a Wonderbag* (18a) : IIMPORTANT Wonderbag* UNIVERSAL bags are available from retail outlets and at Approved Service Centres. Open the cover to your vacuum cleaner (Fig.14). Remove the bag support from the bag compartment (Fig.15). Remove the Wonderbag* bag from the bag support (Fig.16). Throw the Wonderbag* bag away (Fig.17). Place a new Wonderbag* bag in the bag support using its ring (Fig.18). Place the bag support in the bag compartment and fit the bag inside the compartment (Fig.19). Make sure that the bag is correctly positioned before closing the cover. b) If your vacuum cleaner is fitted with a synthetic (textile) bag* (18b) : Synthetic bags* (ref.RS-RT2274) are available from Approved Service Centres. Open the cover to your vacuum cleaner (Fig.14). Remove the bag support from the bag compartment (Fig.20). Remove the synthetic bag* from the bag support (Fig.21). Open the synthetic bag* using the zip (Fig.22) then empty it into a dustbin (Fig.23). Check that the zip is properly closed once more before putting the bag back in again (Fig.24). Place the synthetic bag* on the bag support using its cardboard holder (Fig.25), place the bag support in the bag compartment and fit the bag inside the compartment (Fig.26). Make sure that the bag is correctly positioned before closing the cover. 2 • Changing the (H)EPA* filter cassette (ref. ZR 0029 01*) (for all appliances fitted with a Wonderbag* bag) The (H)EPA filter cassette ref. ZR 0029 01* is available from all retail outlets and at approved Service Centres. Open the cover to your vacuum cleaner (Fig.14). Remove the bag support from the bag compartment (Fig.15), then remove the (H)EPA* filter cassette (Fig.27) and throw the cassette into a bin (Fig.28). Fit the new (H)EPA* filter cassette (ref. ZR 0029 01*) into its compartment (Fig.29) Put the bag support back into the compartment (Fig.19). Make sure that the (H)EPA* filter cassette is correctly positioned before closing the cover. 3 • Cleaning the HEPA* filter cassette (ref ZR0052 01*) (for appliances which come with a synthetic bag*) The (H)EPA* filter cassette ref.ZR0052 01* is available from all retail outlets and at approved Service Centres. Open the cover to your vacuum cleaner (Fig.14). Remove the bag support from the bag compartment (Fig.20), then remove the (H)EPA* filter cassette (Fig.30). Tap the (H)EPA* filter cassette above a dustbin (Fig.31). Put the (H)EPA* filter cassette (ref. ZR005201*) back in its compartment (Fig.32). Put the bag support back with the synthetic bag* in the bag compartment. Make sure that the (H)EPA* filter cassette is correctly positioned before closing the cover.

CLEANING AND MAINTAINING

IMPORTANT Always switch off and unplug your vacuum cleaner before servicing it. IMPORTANT Replace the filtration system once a year. IMPORTANT Never operate the vacuum cleaner without a bag. For your peace of mind your vacuum cleaner is fitted with a safety system which tells you that the bag is inside (the cover won’t close unless you’ve put the bag in). IMPORTANT Wonderbag* COMPACT bags can’t be used on this appliance. Using them could damage the vacuum cleaner and may invalidate the appliance guarantee. IMPORTANT! This cleaning procedure is only for (H)EPA filter cassettes ref. ZR0052 01*

  • Depending on models: either equipment specific to cer- tain models or available as an optional accessory. IMPORTANT Never use the vacuum cleaner without a (H)EPA filter cassette. For your peace of mind your vacuum cleaner is fitted with a safety system which tells you that the (H)EPA cassette filter is in place (the cover won’t close unless you’ve put the (H)EPA) filter cassette in.
  • In accordance with current regulations, any appliance which is no longer needed must be rendered unusable once and for all: unplug and cut off the power cord be- fore disposing of the appliance. Help us take care of the environment!

Your appliance contains many materials which can be recovered or recycled.

Leave it at a waste collection point so that it can be processed.

4 • Cleaning your vacuum cleaner Wipe the body of the appliance and the accessories with a soft cloth (Fig.33). Do not use detergents, chemical or abrasive products.

  • This product has been designed for domestic use only. Any commercial use or professional use, inappropriate use or failure to comply with the instructions, the manufacturer accepts no responsibility and the guarantee will not apply.
  • Read the instructions for use carefully before using your appliance for the first time: any use of the appliance which does not conform to these instructions will release Rowenta from any liability. GUARANTEE If your vacuum cleaner won’t start
  • The appliance has not got any power: check that the appliance is correctly plugged in. If your vacuum cleaner doesn’t have any suction power
  • An accessory or the flexible hose may be blocked: unblock the accessory or the flexible hose.
  • The cover will not close properly: check the positioning of the bag, bag support and (H)EPA filter cassette and close the cover. If your vacuum cleaner has less suction power, makes noise, whistles
  • An accessory or the flexible hose is partially blocked: unblock the accessory or the flexible hose.
  • The bag is full or saturated with fine dust: replace the Wonderbag* bag (18a) or empty the synthetic bag* (18b).
  • The filtration system is saturated: change the (H)EPA* filter cassette (ref ZR002901*) and put it back into its housing or clean the (H)EPA* filter cassette (ref ZR005201*) as indicated in the procedure.
  • The mechanical power control switch (20b) is open: close the power nozzle adjustable manual power switch. If the change bag light stays on Red
  • The bag is saturated: replace the Wonderbag* bag (18a) or empty the synthetic bag* (18b). If the cover won’t close (presence sensors 13, 14, 16)
  • Check that that the bag support is fitted as well as the bag and that it is positioned correctly.
  • Check that the (H)EPA filter cassette is fitted or that it is correctly positioned. If the nozzle is difficult to move
  • Reduce the power by opening the power nozzle adjustable manual power switch (20b) or by moving the electronic power control (9) to the MIN position. If the power cord does not rewind completely
  • The power cord is slowed down when rewinding: pull the power cord out again and press the power cord rewind button. If a problem persists, take your vacuum cleaner to your local Rowenta Approved Service Centre. To find a list of Authorised Service Centres, contact Customer Services, the contact details for which you will find on the enclosed international guarantee card. TROUBLESHOOTING IMPORTANT: As soon as you notice that your vacuum cleaner is not working as well as it should be and before carrying out any checks, switch it off using the On/ Off button.
  • Depending on models: either equipment specific to cer- tain models or available as an optional accessory.