PRO-JECT Speaker Box 10 DS2 - Speaker

Speaker Box 10 DS2 - Speaker PRO-JECT - Free user manual and instructions

Find the device manual for free Speaker Box 10 DS2 PRO-JECT in PDF.

English EN ⬇ Download 💬 AI Question ❓ 10 questions ⚙️ Specs
📄

Document temporarily unavailable

The manual is currently being transferred to our new server. It will be accessible again in a few hours. Thank you for your patience.

View the manual : Français FR English EN
Pick your language and provide your email: we'll send you a specifically translated version.
BrandPro-Ject
ModelSpeaker Box 10 DS2
CategoryLoudspeaker
Product typePassive hi-fi speaker
Nominal impedance4 - 8 ohms
ConnectionsScrew terminals (red/black)
Amplifier compatibilityGood quality amplifier, 4 to 8 ohms
Positioning - Distance from back wall50 cm minimum
Positioning - Distance from side walls1 m minimum
Positioning - Spacing between speakers2 to 4 meters
Positioning - Listener distanceAt least equal to spacing between speakers
ConnectionRespect polarity: red to red, black to black
MaintenanceNo regular inspection required
After-sales serviceContact the dealer
SafetyAvoid high volume with a low-power amplifier
UsageIndoor use only
FunctionsStereo sound reproduction

Frequently Asked Questions - Speaker Box 10 DS2 PRO-JECT

How to connect the Speaker Box 10 DS2 speakers?
Before connecting, make sure the amplifier is turned off. Connect the red terminal of the speaker to the red terminal of the amplifier, and the black terminal to the black terminal. Repeat for the left side. Only connect one speaker per terminal.
What amplifier to use with these speakers?
These speakers are compatible with any good quality amplifier with an impedance of 4 to 8 ohms. Avoid low-power amplifiers driven to high volume, as they can damage the speakers.
How to position the speakers for best sound?
Place the speakers at least 50 cm from the back wall and 1 m from the side walls. The spacing between the two speakers should be 2 to 4 meters. The distance between the listener and the speakers should be at least equal to the spacing between the speakers.
What distance between the speakers is recommended?
A spacing of 2 to 4 meters generally gives good stereo results. Adjust according to your room and perform listening tests.
Do the speakers require regular maintenance?
No, the parts making up the speakers do not require any regular inspection. In case of problem, contact your dealer.
What to do in case of distortion or abnormal noise?
Immediately reduce the volume. A low-power amplifier pushed too hard can damage the speakers. If the problem persists, check the connections and consult your dealer.
Can I use more than one speaker per amplifier terminal?
No, never connect more than one speaker to each amplifier terminal. This could damage the amplifier or the speakers.
How to get a good stereo image?
Follow the recommended placement distances: 50 cm from the back wall, 1 m from the side walls, spacing of 2 to 4 m between the speakers, and a listening distance at least equal to the spacing. Test different locations.
Are the speakers magnetically shielded?
The manual does not mention magnetic shielding. Avoid placing the speakers near CRT screens or sensitive magnetic media.
Where to find spare parts for these speakers?
Contact your Pro-Ject dealer for any spare parts or repair requests. The parts do not require regular replacement.

User questions about Speaker Box 10 DS2 PRO-JECT

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Speaker in PDF format for free! Find your manual Speaker Box 10 DS2 - PRO-JECT and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Speaker Box 10 DS2 by PRO-JECT.

USER MANUAL Speaker Box 10 DS2 PRO-JECT

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : PRO-JECT

Model : Speaker Box 10 DS2

Category : Speaker