TL49UHD19NS - TV Tucson - Free user manual and instructions

USER MANUAL TL49UHD19NS Tucson

1920x1080 þEnglish - 1 - Contents

• The power cord plug should be easily accessible. Do not place the TV, furniture, etc. on the power cord. Adamagedpowercord/plugcancause re or give you an electric shock. Handle the power cord by the plug, do not unplug the TV by pulling the power cord. Never touch the power cord/plug with wet hands as this could cause a short circuit or electric shock. Never make aknot in the power cord or tie it with other cords. When damaged it must be replaced, this shouldonlybedonebyqualiedpersonnel.

• Do not expose the TV to dripping or splashing of liquids anddonotplaceobjects lledwithliquids,suchas vases,cups,etc.onorovertheTV(e.g.,onshelves abovetheunit).

• Do not expose the TV to direct sunlight or do not placeopenamessuchaslitcandlesonthetopof or near the TV.

• Do not place any heat sources such as electric heaters, radiators, etc. near the TV set.

DonotplacetheTVontheoorandinclinedsurfaces.

• Toavoiddangerofsu󰀨ocation,keepplasticbagsoutof the reach of the babies, children and domestic animals.

• Carefully attach the stand to the TV. If the stand is provided with screws, tighten the screws rmly to prevent the TV from tilting. Do not over-tighten the screws and mount the stand rubbers properly.

heatsuchassunshine,reorthelike. Caution Serious injury or death risk Risk of electric shock Dangerousvoltagerisk Safety Information CAUTION

setfromthemains. The mains plug is used to disconnect TV set from the mains and therefore it must remain readily operable. If the TV set is notdisconnectedelectricallyfromthemains,thedevicewill still

modeorswitchedo󰀨. IMPORTANT - Please read these instructions fully before installing or operating

WARNING: Never let people (including children)

with reduced physical, sensory or mental capabilities or lack of experience and / or knowledge use electrical devices unsupervised.

• Use this TV set at an altitude of less than 2000 meters abovethesealevel,indrylocationsandinregionswith moderate or tropical climates.

• The TV set is intended for household and similar general use but may also be used in public places.

Forventilationpurposes,leaveatleast5cmoffree space around the TV.

Theventilationshouldnotbeimpededbycoveringor blockingtheventilationopeningswithitems,suchas newspapers, table-cloths, curtains, etc. Watching Recorded Programmes

General TV Operation

Using the Channel List

AV and HDMI Signal Compatibility

Supported Video File Formats for USB Mode

Supported Picture File Formats for USB Mode

Supported Audio File Formats for USB Mode

Supported Subtitle File Formats for USB Mode

Supported DVI Resolutions

Instant Recording ...................................................8English - 2 - Maintenance Important maintenance component Markings on the Product The following symbols are used on the product as a marker for restrictions and precautions and safety instructions.

Note such information for security reasons. Class II Equipment: This appliance is designed in such a way that it does not require a safety connection to electrical earth. Class II Equipment With Functional Earthing: This appliance is designed in such a way that it does not require a safety connection to electrical earth, the earth connection is used for functional purposes. Protective Earth Connection: The marked terminal is intended for connection of the

the supply wiring. Hazardous Live Terminal: The marked

operating conditions. Caution, See Operating Instructions: The

coin or button cell batteries. Class 1 Laser Product: This product contains Class 1 laser source that is safe under reasonably foreseeable conditions of operation. WARNING

WALL MOUNTING WARNINGS

Read the instructions before mounting your TV on the wall. The wall mount kit is optional. You can obtain from your local dealer, if not supplied with your TV. Do not install the TV on a ceiling or on an inclined wall.

CLASS 1 LASER PRODUCT WARNING

If the battery compartment does not close secu-

Using cabinets or stands recommended by the

Only using furniture that can safely support the

edge of the supporting furniture.

to a suitable support.

supporting furniture. Educating children about the dangers of climbing

retained and relocated, the same considerations

Environmental Information

To reduce energy consumption, you can follow these steps: If you set the Energy Saving to Minimum, Medium, Maximum or Auto the TV will reduce the energy consumption accordingly. If you like to set the Backlight Custom and adjust the Backlight Energy Saving

remote. Set as O󰀨󰀨 Note: Available Energy Saving options may dier depending on the selected Mode in the System>Picture menu.English - 3 - The Energy Saving settings can be found in the Sys- tem>Picture menu. Note that some picture settings

If pressed Right button while Auto option is selected or Left button while Custom option is selected, “Screen

on the screen. Select Proceed and press OK to turn 󰀨 If you don’t press any 󰀨. Press any button on the remote or on the TV to turn the screen on again. Note: Screen O option is not available if the Mode is set to Game. When the TV is not in use, please switch off or disconnect the TV from the mains plug. This will also reduce energy consumption. Features

HD TV by doubling the pixel count of the Full HD TV

and DVB-S2 broadcasts. Remote controlled colour TV

sockets USB input OSD menu system Stereo sound system Teletext Headphone connection Automatic programming system Manual tuning Automatic power down after up to eight hours. Sleep timer Child lock Automatic sound mute when no transmission. NTSC playback

Programme recording Programme timeshifting Accessories Included Remote Control Batteries not included Instruction Book

into standby. When you next switch-on, the following message will be displayed: “TV switched to stand-by mode automatically because there was no signal for a long time.” Press OK to continue. The Auto TV OFF System>Settings>More

by default. If this setting is not set as 󰀨 and the TV has been left on and not been operated during the set time, it will switch into standby mode after the set time has expired. When you next switch-on the TV, the following message will be displayed. “TV switched to stand-by mode automatically because no operation was made for a long time.” Press OK to continue. TV Control Switch & Operation

The Control button allows you to control the Volume / Programme / Source and Standby-On functions of the TV. To change volume:

button down. To change channel: Press the middle of the button in, the information banner will appear on the screen. Scroll through the stored channels by pushing the button up or down. To change source: Press the middle of the button

sources by pushing the button up or down.English - 4 - To turn the TV o󰀨: Press the middle of the button in and hold it down for a few seconds, the TV will turn into standby mode. To turn on the TV: Press the middle of the button in, the TV will turn on. Notes:

• If you turn the TV off, this circle starts again beginningwiththevolumesetting.

• MainmenuOSDcannotbedisplayedviacontrol button. Operation with the Remote Control Press the Menu button on your remote control to display main menu screen. Use the directional buttons to select a menu tab and press OK to enter. Use the directional buttons again to select or set an item. Press Return/Back or Menu button to quit a menu screen. Input Selection Onceyouhaveconnectedexternalsystemstoyour TV,youcanswitchtodi󰀨erentinputsources.Pressthe Sourcebuttononyourremotecontrolconsecutively toselectthedi󰀨erentsources. Changing Channels and Volume Youcanchangethechannelandadjustthevolume by using the Volume +/- and Programme +/- buttons on the remote. Inserting the Batteries into the Remote Remove the back cover to reveal the battery compartment.Insert twosizeAAA batteries. Make sure the (+) and (-) signs match (observe correct polarity).Donotmixoldandnewbatteries.Replace onlywithsameorequivalenttype.Placethecover back on. Connect Power IMPORTANT: The TV set is designed to operate on 220-240V AC, 50 Hz socket. After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the mains. Plug the power cable to the mains socket outlet. Antenna Connection Connect the aerial or cable TV plug to the AERIAL INPUT(ANT)socketlocatedontherearsideoftheTV. Rear side of the TV License Notication ThetermsHDMIandHDMIHigh-DenitionMultimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries. Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio and the double-D symbol are trademarks of Dolby Laboratories. The “CI Plus” Logo is a trademark of CI Plus LLP. This product is protected by certain intellectual property rights of Microsoft Corporation. Use or distribution of such technology outside of this product is prohibited without a license from Microsoft or an authorizedMicrosoftsubsidiary. Information for Users on Disposal of Old Equipment and Batteries [European Union only] Equipment bearing these symbols should not be disposed as general household waste. You should look for appropriate recycling facilities and systems for the disposal of these products. Notice: The sign Pb below the symbol for batteries indicates that this battery contains lead. Products BatteryEnglish-5- Remote Control BACK LANG. EXIT LANG.

2. Numeric buttons: Switches the channel, enters a

number or a letter in the text box on the screen.

3. Language:Switchesbetweensoundmodes(analogue

10. Back/Return: Returns to previous screen, previous

13. Coloured Buttons: Follow the on-screen instructions

for coloured button functions

14. Play: Starts to play selected media

15. Stop: Stops the media being played

16. Fast Forward: Moves frames forward in media such

17. Pause: Pauses the media being played, starts timeshift

19. Info: Displays information about on-screen content,

21. Text: Displaysteletext(whereavailable),pressagain

to superimpose the teletext over a normal broadcast picture(mix)

22. Source:ShowsavailablebroadcastandcontentsourcesEnglish - 6 -

Connections Connector Type Cables (not supplied) Device VGA Connection (back) AUDIO IN PC/YPbPr Audio Connection (back) YPbPr/PC Audio Cable HDMI Connection (side&back) SPDIF SPDIF (Optical Out) Connection (back) BACK AV Back AV (Audio/Video) Connection (back) Audio Video Cable HEADPHONE Headphone Connection (side) YPBPR YPbPr Video Connection (back) PC to YPbPr Connection Cable USB Connection (side)

Connection (side) CAM module NOTE: When connecting a device via the YPbPr or Back AV inputs, you must use the connection cables to enable connection. See the illustrations on the left side. | You can use YPbPr to VGA cable to enable YPbPr signal via VGA input. | You cannot use VGA and YPbPr at the same time. | To enable PC/ YPbPr audio, you will need to use the back audio inputs with a YPbPr/PC audio cable for audio connection. | When using the wall mounting kit (available from third party in the market, if not supplied), we recommend that you plug all your cables into the back of the TV before mounting on the wall. | Insert or remove the CI module only when the TV is SWITCHED OFF. You should refer to the module instruction manual for details of the settings. | The/Each USB input of your TV supports devices up to 500mA. Connecting devices that have current value above 500mA may damage your TV. | By connecting an HDMI cable to your TV, you have to use only a shielded (high grade) HDMI cable to guarantee a sufficient immunity against parasitic frequency radiation. And make sure to use a High-Speed HDMI cable that can transmit high denition signals, such as 4K contents, for trouble-free transmission. IfyouwanttoconnectadevicetotheTV,makesurethatboththeTVandthedeviceareturnedo󰀨beforemaking any connection. After the connection is done, you can turn on the units and use them.English - 7 - Switching On/O󰀨 To Switch the TV On Connect the power cord to a power source such as a wallsocket(220-240VAC,50Hz). To switch on the TV from standby mode either:

• Press the Standby button, Programme +/- or a numeric button on the remote control.

• Press the middle of the side function switch on the TV in. To Switch the TV O󰀨 Press the Standby button on the remote control or press the middle of the side function switch on the TV in and hold it down for a few seconds, the TV will switch into standby mode. To power down the TV completely, unplug the power cord from the mains socket. Note: When the TV is switched into standby mode, the standby LED can blink to indicate that features such as Standby Search, Over Air Download or Timer is active. The LED can also blink when you switch on the TV from standby mode. First Time Installation When turned on for the first time, the language selection screen is displayed. Select the desired language and press OK. On the next screen, set your preferences using the directional buttons. Note: Depending on the Country selection you may be asked to set and conrm a PIN at this point. The selected PIN cannot be 0000. You have to enter it if you are asked to enter a PIN for any menu operation later. About Selecting Broadcast Type Digital Aerial: If Digital Aerial broadcast search option is turned on, the TV will search for digital terrestrial broadcasts after other initial settings are completed. Digital Cable: If Digital Cable broadcast search option is turned on, the TV will search for digital cable broadcasts after other initial settings are completed. Accordingtoyourotherpreferencesaconrmation message may be displayed before starting to search. Select YES and press OK to proceed. To cancel operation, select NO and press OK. You can select NetworkorsetvaluessuchasFrequency, Network ID and Search Step.Whennished,pressOK button. Note: Searching duration will change depending on the selected Search Step. Analogue: If Analogue broadcast search option is turned on, the TV will search for analogue broadcasts after other initial settings are completed. Additionally you can set a broadcast type as your favouriteone. Priority will be givento the selected broadcast type during the search process and the channels of it will be listed on the top of the Channel List .Whennished,pressOK to continue. Youcan activate Store Mode option at this point. ThisoptionwillcongureyourTV’ssettingsforstore environmentanddependingontheTVmodelbeing used, the supported features of it may be displayed on the top of the screen as an info banner. This option is intended only for store use. It is recommended to select Home Mode for home use. This option will be availableinSystem>Settings>More menu and can beturnedo󰀨/onlater. Press OK button on the remote control to continue. After the initial settings are completed TV will start tosearch for available broadcastsof the selected broadcast types. Afteralltheavailablestationsarestored,scanresults will be displayed. Press OK to continue. The Edit Channel List menu will be displayed next. You can edit the channel list according to your preferences or press the Menu button to quit and watch TV. While the search continues a message may appear, asking whether you want to sort channels according to the LCN(*). Select Yes and press OK toconrm. (*) LCN is the Logical Channel Number system that organizes available broadcasts in accordance with a recognizable channel number sequence (if available). Note: Do not turn off the TV while initializing first time installation. Note that, some options may not be available depending on the country selection. Media Playback via USB Input You can connect 2.5” and 3.5” inch (hdd with external power supply) external hard disk drives or USB memory stick to your TV by using the USB inputs of the TV. IMPORTANT!Backupthelesonyourstoragedevices before connecting them to the TV. Manufacturer will notberesponsibleforanyledamageordataloss. Certaintypes of USB devices (e.g. MP3 Players) orUSBharddiskdrives/memorysticksmaynotbe compatible with this TV. The TV supports FAT32 and NTFS disk formatting but recording will not be availablewithNTFSformatteddisks. Whileformatting USB hard drives which have morethan1TB(TeraByte)storagespaceyoumay experience some problems in the formatting process. Wait a little while before each plugging and unplugging as theplayermaystillbereadingles.Failuretodosomay cause physical damage to the USB player and the USB deviceitself.Donotpulloutyourdrivewhileplayingale. You can use USB hubs with your TV’s USB inputs. External power supplied USB hubs are recommended in such a case. Itis recommended to usetheTV’sUSBinput(s) directly, if you are going to connect a USB hard disk.English - 8 - Note: When viewing image les the Media Browser menu can only display 1000 image les stored on the connected USB device. Recording a Programme IMPORTANT: When using a new USB hard disk drive,itisrecommendedthatyourstformatthedisk using your TV’s Format Disk option in the Media Browser>Settings>Recording Settings menu. Torecordaprogramme,youshouldrstconnecta USBdisktoyourTVwhiletheTVisswitchedo󰀨.You should then switch on the TV to enable the recording feature. TouserecordingyourUSBdriveshouldhave2GB free space and be USB 2.0 compatible. If the USB drive is not compatible an error message will be displayed. Torecordlongdurationprogrammessuchasmovies, it is recommended to use USB Hard disk drives (HDD’s). Recordedprogrammesaresavedintotheconnected USB disk. If desired, you can store/copy recordings onto a computer; however,these les will not be availabletobeplayedonacomputer.Youcanplay therecordingsonlyviayourTV. Lip Sync delay may occur during the timeshifting. Radio record is supported. The TV can record programmes up to ten hours. Recorded programmes are split into 4GB partitions. If the writing speed of the connected USB disk is not su󰀩cient,therecordingmayfailandthetimeshifting featuremaynotbeavailable. ItisrecommendedtouseUSBharddiskdrivesfor recording HD programmes. Do not pull out the USB/HDD during a recording. This may harm the connected USB/HDD. IftheACcordisunpluggedwhilethereisanactive USB-recording timer setting, it will be cancelled. Multipartitionsupportisavailable.Amaximumoftwo di󰀨erentpartitionsaresupported.Therstpartitionof the USB disk is used for PVR ready features. It also must be formatted as the primary partition to be used for the PVR ready features. Some stream packets may not be recorded because ofsignalproblems,asaresultsometimesvideosmay freezeduringplayback. Record,Play,Pause,Display(forPlayListDialog)keys can not be used when teletext is on. If a recording starts from timer when teletext is on, teletext is automatically turnedo󰀨.Alsoteletextusageisdisabledwhenthere is an ongoing recording playback. Timeshift Recording Press Pause button while watching a broadcast to activatetimeshiftingmode.Intimeshiftingmode,the programme is paused and simultaneously recorded to the connected USB disk. Press Play button again to resume the paused programme from where you stopped. Press the Stop button to stop timeshift recording and return to the livebroadcast. Timeshift cannot be used while in radio mode. Youcannotusethetimeshiftfastreversefeaturebefore advancingtheplaybackwiththefastforwardoption. Instant Recording Press Record buttontostartrecordinganeventinstantly while watching a programme. You can press Record button on the remote control again to record the next eventafterselectingthenext programmefromwithin the EPG. Press Stop button to cancel instant recording. You can not switch broadcasts or view the media browser during the recording mode. While recording a programme or during the timeshifting, a warning messageappears on the screen if your USB device speedisnotsu󰀩cient. Watching Recorded Programmes Select Recordings from the Media Browser menu. Selecta recordeditem from the list (if previously recorded).Press theOK button to view the Play Options. Select an option then press OK button. Note: Viewing main menu and menu items will not be available during the playback. Press the Stop button to stop a playback and return to the Recordings. Slow Forward If you press Pause button while watching recorded programmes, the slow forward feature will be available.You can use Rapid advance button to slow forward. Pressing Rapid advance button consecutivelywillchangeslowforwardingspeed. Recording Conguration Select the Recording Settings item in the Media Browser>Settings menutoconguretherecording settings. Format Disk: You can use the Format Disk feature for formatting the connected USB disk. Your PIN is required to use the Format Disk feature. Note: Default PIN can be set to 0000 or 1234. If you have dened the PIN(is requested depending on the country selection) during the First Time Installation use the PIN that you have dened. IMPORTANT:FormattingyourUSBdrivewillerase ALLthedataonitandit’slesystemwillbeconverted toFAT32.Inmostcasesoperationerrorswillbexed after a format but you will lose ALL your data. If “USB disk writing speed too slow to record” message is displayed on the screen while starting a recording, try restarting the recording. If you still get the same error, it is possible that your USB disk does not meet the speed requirements. Try connecting another USB disk.English - 9 - Media Browser Menu Youcanplayphoto,musicandmovielesstoredona USB disk by connecting it to your TV. Connect a USB disk to one of the USB inputs located on the side of the TV. Pressing the Menu button while in the Media Browser mode will access the Picture, Sound and Settings menu options. Pressing the Menu button again will exit from this screen. You can set your Media Browser preferences by using the Settings menu. Loop/Shue Mode Operation Start playback with the Play buttonandactivate Alllesinthelistwillbe continuously played in original order Start playback with the OK buttonandactivate Thesamelewillbeplayed continuously(repeat) Start playback with the Play buttonandactivate Alllesinthelistwillbe played once in random order Start playback with the Play buttonandactivate , Alllesinthelistwillbe continuously played in the same random order. CEC and CEC RC Passthrough This function allows to control the CEC-enabled devices,thatareconnectedthroughHDMIportsby using the remote control of the TV. The CEC option in the System>Settings>More menu should be set as Enabled atrst.PresstheSource button and select the HDMI input of the connected CEC device from the Sources List menu. When newCECsourcedeviceisconnected,itwillbelisted in source menu with its own name instead of the connectedHDMIports name(such as DVD Player, Recorder1etc.). The TV remote is automatically able to perform the main functions after the connected HDMI source has been selected. Toterminate this operation and control theTVvia the remote again, press Quick Menu button on the remote, highlight the CEC RC Passthrough and set as O󰀨 by pressing Left or Right button. This feature can also be enabled or disabled under the System>Settings>More menu. TheTVsupports alsoARC(Audio ReturnChannel) feature. This feature is an audio link meant to replace other cables between the TV and the audio system (A/Vreceiverorspeakersystem). WhenARCisactive,TVdoesnotmuteitsotheraudio outputs automatically. So you need to decrease TV volumetozeromanually,ifyouwanttohearaudio fromconnectedaudiodevice only (same as other opticalorco-axialdigitalaudiooutputs).Ifyouwant to changeconnecteddevice’svolume level, you shouldselectthatdevicefromthesourcelist.Inthat casevolumecontrolkeysaredirectedtoconnected audiodevice. Note: ARC is supported only via the HDMI2 input. System Audio Control AllowsanAudioAmplier/Receivertobeusedwith theTV. The volume can be controlled using the remotecontroloftheTV.Toactivatethisfeatureset the Speakers option in the System>Settings>More menu as Amplier. The TV speakers will be muted andthesoundofthewatchedsourcewillbeprovided from the connected sound system. Note: The audio device should support System Audio Control feature and CEC option should be set as Enabled.English - 10 - TV Menu Contents System - Picture Menu Contents Mode You can change the picture mode to suit your preference or requirements. Picture mode can be set to one of these options: Cinema, Game (optional),Sports, Dynamic and Natural. Contrast Adjuststhelightanddarkvaluesonthescreen. Brightness Adjuststhebrightnessvaluesonthescreen. Sharpness Setsthesharpnessvaluefortheobjectsdisplayedonthescreen. Colour Setsthecolourvalue,adjustingthecolours. Energy Saving For setting the Energy Saving to Custom, Minimum, Medium, Maximum, Auto, Screen O󰀨 or O󰀨. Note: Available options may dier depending on the selected Mode. Backlight Thissettingcontrolsthebacklightlevel.ThebacklightfunctionwillbeinactiveiftheEnergy Saving is set to an option other then Custom. Advanced Settings Dynamic Contrast Youcanchangethedynamiccontrastratiotodesiredvalue. Noise Reduction If the signal is weak and the picture is noisy, use the Noise Reduction setting to reduce the amount of noise. Colour Temp Setsthedesiredcolourtemperaturevalue.Cool, Normal, Warm and Customoptionsareavailable. White Point If the Colour Temp option is set as Custom,thissettingwillbeavailable.Increase the ‘warmth’ or ‘coolness’ of the picture by pressing Left or Right buttons. Picture Zoom Setsthedesiredimagesizeformat. Film Mode Filmsarerecordedatadi󰀨erentnumberofframespersecondtonormaltelevisionprogrammes.Turnthisfeatureonwhenyouarewatchinglmstoseethefastmotionscenesclearly. Skin Tone Skintonecanbechangedbetween-5and5. Colour Shift Adjust the desired colour tone. HDMI Full Range WhilewatchingfromaHDMIsource,thisfeaturewillbevisible.Youcanusethisfeaturetoenhance blackness in the picture. PC Position Appears only when the input source is set to VGA/PC. Autoposition Automaticallyoptimizesthedisplay.PressOKtooptimize. H Position Thisitemshiftstheimagehorizontallytotherighthandsideorlefthandsideofthescreen. V Position Thisitemshiftstheimageverticallytowardsthetoporbottomofthescreen. Dot Clock DotClockadjustmentscorrecttheinterferencethatappearasverticalbandingindotintensivepresentationslikespreadsheetsorparagraphsortextinsmallerfonts. Phase Dependingontheinputsource(computeretc.)youmayseeahazyornoisypictureonthescreen. You can use phase to get a clearer picture by trial and error. Reset Resetsthepicturesettingstofactorydefaultsettings(exceptGamemode). While in VGA (PC) mode, some items in Picture menu will be unavailable. Instead, VGA mode settings will be added to the Picture Settings while in PC mode. System - Sound Menu Contents Volume Adjuststhevolumelevel. Equalizer Selectstheequalizermode.CustomsettingscanbemadeonlywheninUser mode. Balance Adjusts whether the sound comes from the left or right speaker.HeadphoneSetsheadphonevolume.Pleaseensurebeforeusingheadphonesthattheheadphonevolumeissettoalowlevel,topreventdamagetoyourhearing.Sound Mode Youcanselectasoundmode(Iftheviewedchannelsupports).English - 11 - AVL (Automatic Volume Limiting) Setsthesoundtoobtainxedoutputlevelbetweenprogrammes. Headphone/Lineout WhenyouconnectanexternalampliertoyourTVusingtheheadphonejack,youcanselectthis option as Lineout.IfyouhaveconnectedheadphonestotheTV,setthisoptionasHeadphone. Please ensure before using headphones that this menu item is set to Headphone. If it is set to Lineout, the output from the headphone socket will be set to maximum which could damage your hearing. Dynamic Bass Enables or disables the Dynamic Bass. Surround sound Surround sound mode can be changed as On or O󰀨. Digital Out Sets digital out audio type. System - Settings Menu Contents Conditional Access Controlsconditionalaccessmoduleswhenavailable. Language Youmaysetadi󰀨erentlanguagedependingonthebroadcasterandthecountry. Parental Enter correct password to change parental settings. You can easily adjust Menu Lock, Maturity Lock, Child Lock or Guidance in this menu. You can also set a new PIN or change the Default CICAM PIN using the related options. Note: Some menu options may not be available depending on the country selection in the First Time Installation. Default PIN can be set to 0000 or 1234. If you have dened the PIN(is requested depending on the country selection) during the First Time Installation use the PIN that you have dened. Timers Setssleeptimertoturno󰀨theTVafteracertaintime.Setstimersforselectedprogrammes. Date/Time Sets date and time. Sources Enables or disables selected source options. There are Regular, Enhanced and Disabledoptions available for HDMI sources.Regular and Enhanced options are a󰀨ectingthecoloursettingsoftheselectedHDMIsource.Tobeabletowatch4Kimages from a HDMI source related source setting should be set as Enhanced if the connected deviceisHDMI2.0compatible.SetasRegulariftheconnecteddeviceisHDMI1.4 compatible. Set acoordingly or disable the related HDMI source by setting as Disabled. Accessibility Displays accessibility options of the TV. Hard of Hearing Enables any special feature sent from the broadcaster. Audio Description A narrationtrackwillbe playedfortheblind orvisuallyimpairedaudience. PressOK to see all availableAudio Descriptionmenuoptions.Thisfeatureisavailableonlyifthebroadcastersupportsit. Note: Audio description sound feature is not available in recording or time shifting mode. More Displays other setting options of the TV. Menu Timeout Changes timeout duration for menu screens. Standby LED If set as O󰀨 the standby LED will not light up when the TV is in standby mode. Software Upgrade EnsuresthatyourTVhasthelatestrmware.PressOK to see the menu options. Application Version Displayscurrentsoftwareversion. Subtitle Mode Thisoptionisusedtoselectwhichsubtitlemodewillbeonthescreen(DVB subtitle / Teletext subtitle)ifbothisavailable.DefaultvalueisDVB subtitle. Thisfeatureisavailableonlyforthe country option of Norway. Auto TV OFF Sets the desired time for the TV to automatically go into standby mode when not being operated. Store Mode Select this mode for store display purposes. Whilst Store Mode is enabled, some items in theTVmenumaynotbeavailable. Power Up Mode Thissettingconguresthepowerupmodepreference.Last State and Standby options are available. CEC With this setting you can enable and disable CEC functionality completely. Press Left or Right button to enable or disable the feature. CEC Auto Power On ThisfunctionallowstheconnectedHDMI-CECcompatibledevicetoturnontheTVandswitch to its input source automatically. Press Left or Right button to enable or disable the feature.English - 12 - Speakers ToheartheTVaudiofromtheconnectedcompatibleaudiodevicesetasAmplier. You can usetheremotecontroloftheTVtocontrolthevolumeoftheaudiodevice. OSS Displays Open Source Software license information. Installation Menu Contents Automatic channel scan (Retune) Displays automatic tuning options. Digital Aerial: Searches and stores aerial DVB stations. Digital Cable: Searches and stores cable DVB stations. Analogue: Searches and stores analogue stations. Manual channel scan This feature can be used for direct broadcast entry. Network channel scan Searches for the linked channels in the broadcast system. Digital Aerial: Searches for aerial network channels. Digital Cable: Searches for cable network channels. Analogue ne tune Youcanusethissettingfornetuninganaloguechannels.Thisfeatureisnotavailableifno analogue channels are stored. Installation Settings Displays installation settings menu. Standby Search (Optional): Your TV will search for new or missing channels while in standby. Any new found broadcasts will be shown. Clear Service List Usethissettingtoclearchannelsstored.ThissettingisvisibleonlywhentheCountry option is set to Denmark, Sweden, Norway or Finland. Select Active Network This setting allows you to select only the broadcasts within the selected network to be listed in the channellist.ThisfeatureisavailableonlyforthecountryoptionofNorway. First time installation Deletes all stored channels and settings, resets TV to factory settings. General TV Operation Using the Channel List The TV sorts all stored stations in the Channel List. Youcaneditthischannellist,setfavouritesorset activestationstobelistedbyusingtheChannel List options. Press the OK button to open the Channel List .Youcanlterthelistedchannelsbypressingthe Blue button or open the Edit Channel List menu by pressing the Greenbuttoninordertomakeadvanced changes in the current list. Managing the Favourite Lists You can create four di󰀨erent lists of your favourite channels. Enter the Channel List in the main menu or press the Green button while the Channel List is displayed on the screen in order to open the Edit Channel List menu. Select the desired channel on the list. You can make multiple choices by pressing the Yellow button. Then press the OK button to open the Channel Edit Options menu and select Add/ Remove Favourites option. Press the OK button again. Set the desired list option to On. The selected channel/swillbeaddedtothelist.Inordertoremove achannelorchannelsfromafavouritelistfollowthe same steps and set the desired list option to O󰀨. You can use the Filter function in the Edit Channel List menutolterthechannelsintheChannel list permanently according to your preferences. Using this Filteroption,youcansetoneofyourfourfavourite liststobedisplayedeverytimetheChannel list is opened.The ltering function in the Channel list menuwillonlylterthecurrentlydisplayedChannel listinordertondachannelandtuneintoit.These changes will not remain the next time the Channel list isopenedifyoudon’tsavethem.Tosavethechanges on the list press the Redbuttonafterlteringwhilethe Channel list is displayed on the screen. Conguring Parental Settings The Parental Settings menu options can be used to prohibitusersfromviewingofcertainprogrammes, channels and using of menus. These settings are located in the System>Settings>Parental menu. To display parental lock menu options, a PIN number should be entered. After coding the correct PIN number, Parental Settings menu will be displayed. Menu Lock: This setting enables or disables access to all menus or installation menus of the TV. Maturity Lock: If this option is set, TV gets the maturity information from the broadcast and if this maturitylevel is disabled, disables access to the broadcast. Note: If the country option in the First Time Installation is set as France, Italy or Austria, Maturity Lock’s value will be set to 18 as default. Child Lock: If this option is set to ON, the TV can only be controlled by the remote control. In this case the control buttons on the TV will not work. Set PIN: DenesanewPINnumber.English - 13 - Default CICAM PIN: This option will appear as greyed out if no CI module is inserted into the CI slot of the TV. You can change the default PIN of the CI CAM using this option. Note: 0000 or 1234. If you have

selection) during the First Time Installation

Some options may not be available depending on the country selection in the First Time Installation. Electronic Programme Guide (EPG) Some channels send information about their broadcast schedules. Press the Epg buttontoview the Programme Guide menu. There are 3 different types of schedule layouts available,Timeline Schedule, List Schedule and Now/Next Schedule. To switch between them follow the instructions on the bottom of the screen. Timeline Schedule Zoom (Yellow button): Press the Yellow button to seeeventsinawidertimeinterval. Filter (Blue button): Viewslteringoptions. Highlight Genre (Subtitles button): Displays Highlight Genre menu. Using this feature, you can search the programme guide database in accordance withthegenre.Infoavailableintheprogrammeguide will be searched and results matching your criteria will be highlighted. Options (OK button): Displayseventoptions. Event Details (Info button): Displays detailed information about selected programmes. Next/Prev Day (Programme +/- buttons): Displays theprogrammesofpreviousornextday. Search (Text button): Displays Guide Search menu. Now (Source button):Displayscurrenteventofthe highlighted channel. Rec./Stop (Record button): The TV will start to record the selected programme. You can press again to stop the recording. List Schedule(*) (*) In this layout option, only

Prev. Time Slice (Red button): Displays the programmesofprevioustimeslice. Next/Prev Day (Programme +/- buttons): Displays theprogrammesofpreviousornextday. Event Details (Info button): Displays detailed information about selected programmes. Filter (Text button): Viewslteringoptions. Next Time Slice (Green button): Displays the programmes of next time slice. Options (OK button):Displayseventoptions. Rec./Stop (Record button): The TV will start to re- cord the selected programme. You can press again to stop the recording. Now/Next Schedule Options (OK button):Displayseventoptions. Event Details (Info button): Displays detailed information about selected programmes. Filter (Blue button): Viewslteringoptions. Rec./Stop (Record button): The TV will start to record the selected programme. You can press again to stop the recording. Programme Options Use the directional buttons to highlight a programme and press OK button to display Event Options menu. Thefollowingoptionsareavailable. Select Channel: Using this option, you can switch to the selected channel. Record / Delete Rec. Timer: Select the Record option and press the OK button. If the programme is going to be broadcasted at a future time, it will be added to Timers list to be recorded. If the selected programme is being broadcasted at the moment, recording will start immediately. To cancel an already set recording, highlight that programme and press the OK button and select the option Delete Rec. Timer. The recording will be cancelled. Set Timer on Event / Delete Timer on Event: After you haveselecteda programme intheEPG menu, press the OK button. Select Set Timer on Event option and press the OK button. You can set a timer for future programmes. To cancel an already set timer, highlight that programme and press the OK button. Then select Delete Timer on Event option. The timer will be cancelled. IMPORTANT: Connect a USB disk to your TV while the TV

the recording feature. Notes: You cannot switch to any other channel while there is an active recording or timer on the current channel. It is not possible to set timer or record timer for two or more individual events at the same time interval. Teletext Services Press the Textbuttontoenter.Pressagaintoactivate mix mode, which allows you to see the teletext page and the TV broadcast at the same time. Press once more to exit.If available, sectionsin the teletextpages will become colour-coded and can be selected by pressing the coloured buttons. Follow the instructions displayed on the screen. Digital Teletext Press the Textbuttontoviewdigitalteletextinformation. Operate it with the coloured buttons, cursor buttons and the OKbutton. Theoperation methodmaydi󰀨er depending on the contents of the digital teletext. Follow the instructions displayed on the digital teletext screen. When the Text button is pressed again, the TV returns totelevisionbroadcast.English - 14 - Software Upgrade YourTViscapableofndingandupdatingthermware automaticallyviathebroadcastsignal. Software upgrade search via user interface On the main menu select System>Settings and then More.NavigatetoSoftware upgrade and press the OK button. In Upgrade options menu select Scan for upgrade and press OK button to check for a new software upgrade. If a new upgrade is found, it starts to download the upgrade. After the download is completed confirm the question asking about rebooting the TV by pressing the OK to continue with the reboot operation. 3 AM search and upgrade mode Your TV will search for new upgrades at 3:00 o’clock if Automatic scanning option in the Upgrade options menu is set to Enabled and if the TV is connected to an aerial signal. If a new software is found and downloaded successfully, it will be installed at the next power on. Note: Do not unplug the power cord while led is blinking during the reboot process. If the TV fails to come on after the upgrade, unplug, wait for two minutes then plug it back in. Troubleshooting & Tips Tv will not turn on Make sure the power cord is plugged in securely to wall outlet. Check if batteries are exhausted. Press the Power button on the TV. Poor picture

• CheckifyouhaveselectedthecorrectTVsystem.

• Lowsignallevelcancausepicturedistortion.Please check antenna access.

• Thepicturequalitymaydegradewhentwodevices are connected to the TV at the same time. In such acase,disconnectoneofthedevices. No picture

• ThismeansyourTVisnotreceivinganytransmission. Make sure the correct source has been selected.

• Is the antenna connected properly?

• Is the antenna cable damaged?

• Are suitable plugs used to connect the antenna?

• If you are in doubt, consult your dealer. No sound

• Check if the TV is muted. Press the Mute button or increasethevolumetocheck.

• Sound may be coming from only one speaker. Check the balance settings from Sound menu. Remote control - no operation

• The batteries may be exhausted. Replace the batteries. Input sources - can not be selected

• If you cannot select an input source, it is possible thatnodeviceisconnected.Ifnot;

• ChecktheAVcablesandconnectionsifyouhave triedtoconnectadevice.

• Check the AV cables and connections if you are trying to switch to the input source dedicated to the connecteddevice. Recording unavailable Torecordaprogramme,youshouldrstconnecta USBdisk to yourTVwhiletheTV is switched o󰀨. You should then switch on the TV to enable recording feature.Ifyoucannotrecord,tryswitchingo󰀨theTV andthenre-insertingtheUSBdevice. USB is too slow If a “USB disk writing speed too slow to record” message is displayed on the screen while starting a recording, try restarting the recording. If you still get the same error, it is possible that your USB disk does not meet the speed requirements. Try connecting another USB disk.English-15- PC Input Typical Display Modes The following table is an illustration of some of the typicalvideodisplaymodes.YourTVmaynotsupport all resolutions. Index Resolution Frequency 1 640x350 85Hz 2 640x480 60Hz 3 640x480 72Hz 4 640x480 75Hz 5 800x600 56Hz 6 800x600 60Hz 7 800x600 72Hz 8 800x600 75Hz 9 1024x768 60Hz 10 1024x768 70Hz 11 1024x768 75Hz 12 1024x768 85Hz 13 1152x864 75Hz 14 1280x768 60Hz 15 1280x768 75Hz 16 1280x960 60Hz 17 1280x960 75Hz 18 1280x1024 60Hz 19 1280x1024 75Hz 20 1360x768 60Hz 21 1366x768 60Hz 22 1400x1050 59Hz 23 1400x1050 60Hz 24 1400x1050 75Hz 25 1440x900 60Hz 26 1440x900 75Hz 27 1600x1200 60Hz 28 1680x1050 59Hz 29 1680x1050 60Hz 30 1920x1080 60Hz AV and HDMI Signal Compatibility Source Supported Signals Available EXT (SCART) PAL O SECAM O NTSC4.43 O NTSC3.58 RGB50/60 O Side AV PAL O SECAM O NTSC4.43 O NTSC3.58 O YPbPr 480i, 480p 60Hz O 576i,576p 50Hz O 720p 50Hz,60Hz O 1080i 50Hz,60Hz O HDMI 480i 60Hz O 480p 60Hz O 576i,576p 50Hz O 720p 50Hz,60Hz O 1080i 50Hz,60Hz O 1080p 24Hz, 25Hz, 30Hz, 50Hz, 60Hz

SubViewer 1.0 & 2.0 Only .txt TMPlayer Supported DVI Resolutions

VESA WALL MOUNT MEASUREMENTS

Hole Paern Sizes (mm) W H

VESA WALL MOUNT MEASUREMENTS