X65165BV10 - Fridge AEG - Free user manual and instructions

USER MANUAL X65165BV10 AEG

Modern kitchen interior with white cabinetry and large refrigerator (no visible text or symbols)

FOR PERFECT RESULTS

Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.

Visit our website to:

Get usage advice, brochures, trouble shooter, service information: www.aeg.com

Register your product for better service: www.aeg.com/productregistration

Buy Accessories, Consumables and Original spare parts for your appliance: www.aeg.com/shop

ENVIRONMENT CONCERNS

Recycle the materials with the symbol 📁 Put the packaging in applicable containers to recycle it. Help protect the environment and human health and to recycle waste of electrical and electronic appliances. Do not dispose appliances marked with the symbol 📋 with the household waste. Return the product to your local recycling facility or contact your municipal office department for household waste or the shop where you purchased this product.

CUSTOMER CARE AND SERVICE

We recommend the use of original spare parts.

When contacting Service, ensure that you have the following data available.

The information can be found on the rating plate. Model, PNC, Serial Number.

Warning / Caution-Safety information.

General information and tips

Environmental information.

Subject to change without notice.

1! SAFETY INSTRUCTIONS

Caution! Closely follow the instructions set out in this manual. All responsibility, for any eventual inconveniences, damages or fires caused by not complying with the instructions in this manual, is declined. The extractor hood has been designed exclusively for domestic use.

Caution! Do not connect the appliance to the mains until the installation is fully complete. Before any cleaning or maintenance operation, disconnect hood from the mains by removing the plug or disconnecting the mains electrical supply.

Always wear work gloves during the maintenance, installation and lighting operations. The appliance is not intended for use by children or persons with impaired physical, sensorial or mental faculties, or if lacking in experience or knowledge, unless they are under supervision or have been trained in the use of the appliance by a person responsible for their safety. This appliance is designed to be operated by adults, children should be monitored to ensure that they do not play with the appliance. This appliance is designed to be operated by adults. Children should not be allowed to tamper with the controls or play with the appliance. Never use the hood without effectively mounted grating! The hood must NEVER be used as a support surface unless specifically indicated. The premises where the appliance is stalled must be sufficiently ventilated, when the kitchen hood is used together with other gas combustion devices or other fuels. The ducting system for this appliance must not be connected to any existing ventilation system which is being used for any other purpose such as discharging exhaust fumes from appliances burning gas or other fuels. The flaming of foods beneath the hood itself is severely prohibited. The use of exposed flames is detrimental to the filters and may cause a fire risk, and must therefore be avoided in all circumstances. Any frying must be done with care in order to make sure that the oil does not overheat and ignite.

Caution! Accessible parts of the hood may become hot when used with cooking appliance.

With regards to the technical and safety measures to be adopted for fume discharging it is important to closely follow the regulations provided by the local authorities. The hood must be regularly cleaned on both the inside and outside (AT LEAST ONCE A MONTH).

This must be completed in accordance with the maintenance instructions provided in this manual). Failure to follow the instructions provided in this user guide regarding the cleaning of the hood and filters will lead to the risk of fires. Do not use or leave the hood without the lamp correctly mounted due to the possible risk of electric shocks. We will not accept any responsibility for any faults, damage or fires caused to the appliance as a result of the non-observance of the instructions included in this manual.

Warning! Failure to install the screws or fixing device in accordance with these instructions may result in electrical hazards.

2. USE

The hood serves to aspirate the fumes and vapors resulting from cooking.

The attached installation manual indicates the version to be used depending on the model you have, the suction version with

external evacuation of filtering with

internal recirculation

3. INSTALLATION

The mains power supply must correspond to the rating indicated on the plate situated inside the hood. If provided with a plug connect the hood to a socket in compliance with current regulations and positioned in an accessible area, after installation. If it not fitted with a plug (direct mains connection) or if the plug is not located in an accessible area, after installation, apply a double pole switch in accordance with standards which assures the complete disconnection of the mains under conditions relating to over-current category III in accordance with installation instructions.

⚠ Warning! Before re-connecting the hood circuit to the mains supply and checking the efficient function, always check that the mains cable is correctly assembled.

The minimum distance between the supporting surface for the cooking equipment on the hob and the lowest part of the range hood must be not less than 45cm from electric cookers and 50cm from gas or mixed cookers. If the instructions for installation for the gas hob specify a greater distance, this must be adhered to.

4. MAINTENANCE

ATTENTION! Before performing any maintenance operation, isolate the hood from the electrical supply by switching off at the connector and removing the connector fuse.

Or if the appliance has been connected through a plug and socket, then the plug must be removed from the socket. The cooker hood should be cleaned regularly (at least with the same frequency with which you carry out maintenance of the fat filters) internally and externally. Clean using the cloth dampened with neutral liquid detergent. Do not use abrasive products. DO NOT USE ALCOHOL!

Warning! Failure to carry out the basic cleaning recommendations of the cooker hood and replacement of the filters may cause fire risks. Therefore, we recommend observing these instructions.

The manufacturer declines all responsibility for any damage to the motor or any fire damage linked to inappropriate maintenance or failure to observe the above safety recommendations.

4.1 Grease filter - The grease filter must be cleaned once a month using non aggressive detergents, either by hand or in the dishwasher, which must be set to a low temperature and a short cycle. When washed in a dishwasher, the grease filter may discolour slightly, but this does not affect its filtering capacity.

Illustration of a hand using a flatboard to lift a panel, with an inset showing the same component (no text or symbols present)

4.2 NON-washable activated charcoal filter - The saturation of the charcoal filter occurs after more or less prolonged use, depending on the type of cooking and the regularity of cleaning of the grease filter. In any case it is necessary to replace the cartridge at least every four mounths. The charcoal filter may NOT be washed or regenerated.

Diagram of a mechanical fan assembly with two blades and internal components, showing motion direction (no text or labels)

5. CONTROLS

The hood is fitted with a control panel with aspiration speed selection control and a light switch to control cooking area lights. Use the high suction speed in cases of concentrated kitchen vapours. It is recommended that the cooker hood suction is switched on for 5 minutes prior to cooking and to leave in operation during cooking and for another 15 minutes approximately after terminating cooking.

graph TD
    A["1"] --> B["2"]
    B --> C["3"]
    C --> D["4"]
    D --> E["5"]

1 ON/OFF lights
2 OFF motors
3 Minimum suction power
4 Medium suction power
5 Maximum suction power

6. LIGHTING

Disconnect the hood from the electricity.

Warning! Prior to touching the light bulbs ensure they are cooled down.

Replace with a new 12 Volt, 20 Watt (Maximum) halogen light made for a G-4 base SUITABLE FOR USE IN OPEN LUMINAIRES. Follow package directions and do not touch new light with bare hands.

Illustration of a hand holding a screwdriver, a circular component with a blue arc, and a circular dial with arrows indicating rotation (no text or symbols)

X08155BV-X

The hood is equipped with a lighting system based on LED technology.

The LEDs guarantee an optimum lighting, a duration up to 10 times as long as the traditional lamps and allow to save 90% electrical energy.

Caution! Do not look directly into the LED light.

To replace lights, contact authorised spare part center.

Illustration of a hand using a flatboard to lift a blank sheet, with an inset showing the same process (no text or symbols)

Diagram of a mechanical fan assembly with two blades and internal components, showing airflow direction (no text or labels)

5. BEDIENELEMENTE

Illustration of a hand holding a screwdriver, a close-up of the dial, and a circular device with arrows indicating motion (no text or symbols)

X08155BV-X

Illustration of a hand using a flatboard to lift a blank sheet, with an inset showing a hand holding a small object (no text or symbols present)

Diagram of a mechanical fan assembly with two blades and internal components, showing motion direction (no text or labels)

5. COMMANDES

Illustration of a hand holding a circular device with a screwdriver and a compass-like dial (no text or symbols)

X08155BV-X

1! VEILIGHEIDSVOOR- SCHRIFTEN

Illustration of a hand using a flatboard to lift a panel, with an inset showing the same component (no text or symbols present)

Diagram of a mechanical fan assembly with two blades and internal components, showing motion direction (no text or labels)

5. BEDIENINGSELEMENTEN

Illustration of a hand holding a screwdriver, a magnifying glass with arrows indicating rotation (no text or symbols)

X08155BV-X

Illustration of a hand using a flatboard to lift a panel, with an inset showing the same component (no text or symbols present)

Diagram of a mechanical fan assembly with internal blades and fan blades, showing motion direction (no text or labels)

5. MANDOS

Illustration of a hand holding a circular device with a screwdriver and a dial indicator (no text or symbols)

X08155BV-X

www.aeg.com/productregistration

Illustration of a hand using a flatboard to lift a blank sheet, with an inset showing a hand holding a tool (no text or symbols present)

Diagram of a mechanical fan assembly with two blades and internal components, showing airflow direction (no text or labels)

5. COMANDOS

Illustration of a hand holding a screwdriver, a magnifying glass, and a circular dial (no text or symbols)

X08155BV-X

www.aeg.com/productregistration

Illustration of a person using a flatboard to lift a chair, with an inset showing the chair's seat and arm (no text or symbols)

Diagram of a mechanical fan assembly with two blades and internal components, no text or symbols present

5. COMANDI

Illustration of a hand holding a screwdriver, a magnifying glass with arrows indicating rotation (no text or symbols)

X08155BV-X

Illustration of a hand using a flatboard to lift a blank sheet, with an inset showing the same object being inserted (no text or symbols present)

Diagram of a mechanical fan assembly with two blades and internal components, showing motion direction (no text or labels)

5. KOMMANDON

Illustration of a hand holding a screwdriver, a close-up of the dial, and a circular compass with arrows indicating direction (no text or symbols)

X08155BV-X

Illustration of a hand using a flatboard to lift a blank sheet, with an inset showing a hand holding a small object (no text or symbols present)

4.2 KKE vaskbart aktivt kullfilter

Diagram of a mechanical fan assembly with two wheels and internal blades, showing motion direction (no text or labels)

5. KONTROLLER

Illustration of a hand holding a screwdriver, a magnifying glass with arrows indicating direction (no text or symbols)

X08155BV-X

Ventilatoren er utstyrt med et belysningssystem basert på LED-teknologi. LED-lysene garanterer optimal belysning, har opptil 10 ganger lengre varighet enn tradisjonelle lyspærer og tillater en strømsparing på 90 %.

! Forsiktig! Ikke se direkte på LED-lyset.

Illustration of a person using a flatboard to lift a chair, with an inset showing the same hand and chair (no text or symbols)

Diagram of a mechanical fan assembly with two blades and internal blades, showing directional arrows indicating motion (no text or labels)

5. OHJAIMET

Illustration of a hand holding a screwdriver, a magnifying glass with arrows indicating direction (no text or symbols)

X08155BV-X

www.aeg.com/productregistration

Illustration of a hand using a flatboard to lift a blank sheet, with an inset showing a close-up of the process (no text or symbols)

Diagram of a mechanical fan assembly with two blades and internal blades, showing directional arrows (no text or labels)

5. BETJENING

Illustration of a hand holding a circular device with a screwdriver and a magnifying glass (no text or symbols)

X08155BV-X

Illustration of a hand using a flatboard to lift a blank sheet, with an inset showing the same process (no text or symbols)

Diagram of a mechanical fan assembly with two blades and internal components, no text or symbols present

Illustration of a hand holding a circular component with a screwdriver and a dial indicator (no text or symbols)

X08155BV-X

Illustration of a hand pressing down an easel with arrows indicating motion, showing a mechanical component inside (no text or symbols)

4.2 MITTEPESTAV aktiivsöefilter

Diagram of a mechanical fan assembly with two blades and internal components, showing airflow direction (no text or labels)

5. JUHIKUD

Illustration of a hand holding a screwdriver, a magnifying glass with arrows indicating direction (no text or symbols)

X08155BV-X

Illustration of a hand using a stand to lift a flatboard, with an inset showing the same hand performing a tool (no text or symbols present)

Diagram of a mechanical fan assembly with two blades and internal blades, showing airflow direction (no text or labels)

5. VADĪBAS ELEMENTI

Illustration of a hand holding a screwdriver, a magnifying glass, and a circular dial (no text or symbols)

X08155BV-X

Illustration of a hand using a flatboard to lift a panel, with an inset showing a close-up of the component (no text or symbols)

4.2 Neplaunamas aktyviosios anglies filtras

Diagram of a fan assembly with two blades and internal blades, showing airflow direction (no text or labels)

5. VALDYMAS

Illustration of a hand holding a screwdriver, a magnifying glass with arrows indicating rotation (no text or symbols)

X08155BV-X

www.aeg.com/productregistration

Illustration of a hand using a flatboard to lift a blank sheet, with an inset showing the same process (no text or symbols)

Diagram of a mechanical fan assembly with two blades and internal components, showing airflow direction (no text or labels)

Illustration of a hand holding a circular component with a screwdriver, and a compass showing the direction (no text or symbols)

X08155BV-X

www.aeg.com/productregistration

Illustration of a hand using a stand to lift a flatboard, with an inset showing a close-up of the handle (no text or symbols)

Diagram of a mechanical fan assembly with two blades and internal components, showing motion direction (no text or labels)

5. KEZELŐSZERVEK

Illustration of a hand holding a screwdriver, a magnifying glass with arrows indicating direction (no text or symbols)

X08155BV-X

Illustration of a hand using a flatboard to lift a blank sheet, with an inset showing a close-up of the process (no text or symbols)

Diagram of a turbine or fan assembly showing internal components and airflow direction (no text or labels)

5. PŘÍKAZY

Illustration of a hand holding a circular device with a screwdriver and a compass-like dial (no text or symbols)

X08155BV-X

1! BEZPEČNOSTNÉ POKYNY

Illustration of a hand using a flatboard to lift a board, with an inset showing a hand holding a small object (no text or symbols present)

Diagram of a fan assembly showing internal components and airflow direction (no text or labels)

5. OVLÁDAČE

Illustration of a hand holding a circular device with a screwdriver and a compass-like dial (no text or symbols)

X08155BV-X

Illustration of a hand using a stand to lift a flatboard, with an inset showing a close-up of the handle (no text or symbols)

4.2 Filtru cu carbon activ NElavabil

Diagram of a mechanical fan assembly with two blades and internal components, showing motion direction (no text or labels)

5. COMENZI

Illustration of a hand holding a circular device with a screwdriver and a dial indicator (no text or symbols)

X08155BV-X

www.aeg.com/productregistration

Illustration of a hand using a flatboard to lift a blank sheet, with an inset showing a hand holding a small object (no text or symbols present)

Diagram of a mechanical fan assembly with two blades and internal components, showing airflow direction (no text or labels)

5. STEROWANIE

Illustration of a hand holding a circular device with a pointer and a magnified view of the screen (no text or symbols)

X08155BV-X

Illustration of a hand using a flatboard to lift a blank sheet, with an inset showing the same process (no text or symbols)

4.2 Aktivni karbonski filtar koji se NE može oprati.

Zasićenje karbonskog filtra se pojavljuje poslije manje-više produljene uporabe s obzirom na tip kuhinje i na urednost u čišćenju filtera za uklanjanje masnoće. U svakom slučaju je potrebno zamijeniti kartušu barem svaka četiri mjeseca. NE može se niti oprati, niti obnoviti.

Diagram of a mechanical fan assembly with two wheels and internal blades, showing motion direction (no text or labels)

5. NAREDBI

Illustration of a hand holding a screwdriver, a magnifying glass with arrows indicating rotation (no text or symbols)

X08155BV-X

Kuhinjska napa je opremljena sustavom rasvjete koji se bazira na tehnologiji INDIKACIONIH SVJETALA. INDIKACIONA SVJETLA garantiraju optimalnu rasvjetu te trajnost 10 puta veću od tradicionalnih lampi a omogućuju i uštedu od 90% električne energije.

Illustration of a hand using a flatboard to lift a blank sheet, with an inset showing the same object being inserted (no text or symbols present)

4.2 Nepralni filter z aktivnim ogljem

Diagram of a mechanical fan assembly with two blades and internal components, showing airflow direction (no text or labels)

5. UPRAVLJALNI GUMBI

Illustration of a hand holding a screwdriver, a magnifying glass with arrows indicating direction (no text or symbols)

X08155BV-X

Napa ima sistem osvetlitve, ki temelji na LED tehnologiji.

Illustration of a hand using a flatboard to lift a blank sheet, with an inset showing the same object being inserted (no text or symbols present)

Diagram of a fan assembly with two blades and a central fan, showing internal components and directional arrows (no text or labels)

5. XEIPISTHPIA

Illustration of a hand holding a screwdriver, with a magnifying glass hovering around it (no text or symbols)

X08155BV-X

Illustration of a hand holding a circular component with a screwdriver, alongside a circular dial indicator (no text or symbols)

X08155BV-X

www.aeg.com/productregistration

Illustration of a hand using a flatboard to lift a blank sheet, with an inset showing a hand holding a tool (no text or symbols present)

Diagram of a mechanical fan assembly with two blades and internal components, no text or symbols present

5. УПРАВЛЕНИЯ

Illustration of a hand holding a circular component with a screwdriver and a magnified view showing the screen (no text or symbols)

X08155BV-X

www.aeg.com/productregistration

Illustration of a hand using a flatboard to lift a blank sheet, with an inset showing the same process (no text or symbols)

Diagram of a mechanical fan assembly with two blades and internal components, showing motion direction (no text or labels)

Illustration of a hand holding a screwdriver, a magnifying glass with arrows indicating rotation (no text or symbols)

X08155BV-X

Illustration of a hand using a flatboard to lift a blank sheet, with an inset showing the same object being inserted (no text or symbols present)

Diagram of a mechanical fan assembly with two wheels and internal blades, showing motion direction (no text or labels)

5. КОНТРОЛИ

Illustration of a hand holding a circular device with a screwdriver and a compass-like dial (no text or symbols)

X08155BV-X

www.aeg.com/productregistration

Illustration of a hand using a flatboard to lift a blank sheet, with an inset showing a hand holding a small object (no text or symbols present)

Illustration of a hand holding a small object, with a screwdriver and a circular compass-like device nearby (no text or symbols)

X08155BV-X

www.aeg.com/productregistration

Illustration of a hand using a flatboard to lift a blank sheet, with an inset showing the same object being inserted (no text or symbols present)

Diagram of a mechanical fan assembly with two blades and internal components, showing airflow direction (no text or labels)

5. КОМАНДЕ

Illustration of a hand holding a circular object with a screwdriver and a magnifying glass, no text or symbols present.

X08155BV-X

Illustration of a hand holding a screwdriver, a magnifying glass with arrows indicating direction (no text or symbols)

X08155BV-X

Illustration of a hand using a flatboard to lift a blank sheet, with an inset showing the same object (no text or symbols present)

Diagram of a fan assembly showing internal components and airflow direction (no text or labels)

www.aeg.com/productregistration