HCN6202BK - Fridge HOOVER - Free user manual and instructions

USER MANUAL HCN6202BK HOOVER

EN18EN control of storage temperatures is to be stored, it is possible that it will deterio- rate or an uncontrolled reaction may occur that can cause risks. or in the built-in structure, free of obstruction. he top of the appliance.

ed solely by qualified personnel. This appliance can be used by children aged from 8 years and ab persons with reduced physical, sensory or mental capabilities or with a lack of equate in a safe way

Children should not play with the appliance. Cleaning and user maintenance

urning the knob fully counterclockwise, you will hear a click which correspo- nds to the switch-of f of the product. When the appliance is installed, the electrical cord and the current socket must be easily reached. The socket is compatible with the plug of the appliance. If not, request replac- ement of the plug by an authorized technician; do not use extension cords

t hands as it can cause burns. ces, such as heaters, steam cleaners, candles, oil lamps and the like to accelerate the defrosting phase. ce present. These can damage the refrigerant circuit, the leakage of which can cause a fi re or damage your eyes.

This appliance contains a UV emitter. Do not stare directly at the light source.

his appliance is marked according to the European directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE). WEEE contains both polluting substances (which can cause negative consequences for the environment) and basic components (which can be re-used). It is important to have WEEE subjected to specific treatments, in order to remove and dispose properly all pollutants, and recover and recycle all materials. Individuals can play an important role in ensuring that WEEE does not become an environmental issue; it is essential to follow some basic rules:

result in leakage. Furthermore, condensation could accumulate on the exterior of the appliance. insulation and

ARNINGS: ces of heat or exposed to direct sunlight. The appliance operates properly within the range of environmental temperatures indicated: +10 +32’C for the climatic class SN +16 +32’C for the climatic class N +16 +38’C for the climatic class ST +16 +43’C for the climatic class T (See the nameplate of the product)

1 Make sure that the space around the refrigerator is adequate for ventilation. shows the minimum space required for the installation of the refrigerator. Maintaining a wider space from the wall, results in reduced electrical energy consumption. The use of the refrigerator in a space the size less than those

WEEE should be handed over to the relevant collection points managed by the municipality or by registered companies. In many countries, for large WEEE, home collection could be present. In many countries, when you buy a new appliance, the old one may be returned to the retailer who has to collect it free of charge on a one-to-one basis, as long as the equipment is of equivalent type and has the same functions as the supplied equipment.

placing the mark on this product, we are confirming compliance to all relevant European safety, health and environmental requirements which are applicable in legislation for this product.

WEEE should not be treated as household waste;:LWK,QWHUQDO7XUQLQJ.QRE

ou can't use it on other appliances, andthe exposed wires could be dangerous if Electrical connection (for U.K. only) Plug your appliance into the power socket. If the plug we supply does not fit :

AND DESTROY IT! anyone plugged it in. Fit a suitable plug, as follows:Green and yellow wireMarked with the letter E,OR marked with the Earth symbol, OR coloured green,OR coloured green and yellow. Blue wire Brown wireMarked N,OR coloured black.Marked L,OR coloured red.Connect to the terminal in the plug Do not use sharp objects to remove this protection as it could damage it. authorised The fan is preset to OFF. To activate, press the switch (fig. 6) To optimize energy consumption, it is recommended that you turn the fan on only when the ambient air temperature exceeds 28/30 °C.

EN214. One Touch buttonTo turn it o, simply close the door or press button 2.If the door is left open for longer than 90 seconds, an alarm is sounded.

:LWK,QWHUQDO8VHULQWHUIDFHDQG1)&

ON/OFF buttonPress the button for setting the temperature until you reach the level you want where level 1 is the warmest and level 4 is the coldest. Under normal operating conditions, we recommend using an intermediate setting (level 2)If you do not press the button (2) for more than 5 seconds, the settings will be saved.The temperature levels in advanced settings are set from warmest to coldest e.g. 2/2.1/2.3/2.4 which means there are 4 sub-levels for every main level.Door open alarm On/O 1 2 3 4 Press button (2) for less than 2 seconds to change the temperature level. On/O 12 3 4 Advanced settings menu:Use this menu to set an intermediate level. On/O 1 2 34 Press button (2) for more than 2 seconds. When you release it, LED 2 will flash On/O 1 2 3 4 The next time you press button (2) for less than 2 seconds, the intermediate level will be set. This operation works in cycles every time you press the button.On/O 1 2 3 4On/O 1 2 3 4 Setting the temperature Control panel Temperature indicator LED2. Temperature controlTurning the appliance ON:Plug the appliance in, if all the temperature indicators LEDs are off, press ON/OFF (3) for 1 second. When you release the ON/OFF button (3) a temperature light will come on and the appliance will beep.Turning the appliance OFF:Press the ON/OFF button (3) for 1 second, when you release it, the temperature light will go out and the appliance will beep. In the event of a power failure, when the power comes back on, the appliance will run using the last saved setting.

EN22 This appliance is equipped with One Touch technology that allows you to interact, via the App, with smartphones based on Android operating system and equipped with NFC (Near Field Communication) function. This appliance is equipped with One Touch technology that allows you to interact, via the App, with smartphones based on Android operating system and equipped with NFC (Near Field Communication) function. Download on your smartphone the Hoover Wizard App. The Hoover Wizard App is available for devices running both Android and iOS, both for tablets and for smartphones. However, you can interact with the machine and take advantage of the potential offered by Smart Touch only with Android smartphones equipped with NFC technology, according to following functional scheme: Android smartphone with NFC technology Interaction with the machine + contents Android smartphone without NFC technology Contents only Android Tablet Contents only Apple iPhone Contents only Apple iPad Contents only ONE TOUCH FUNCTIONS The main functions available using the App are: Fine Temperature Level Setting – To set temperature level also by intermediate steps (0,5; 1; 1,5; 2; 2,5; 3; 3,5; 4; 4,5) Super Boost – To activate an additional boost to cool down quickly both fridge and freezer. Eco Mode – Automatically the entire refrigerator is settled on level 2 (+5°, -18°) Reports – Cooling statistics and tips for a more efficient use of your machine. Clever Care – Direct link to User Manual and help on line. Get all the details of the Smart Touch functions, browsing the App in DEMO mode or go to:www.hooveronetouch.com

HOW TO USE ONE TOUCH

FIRST TIME - Machine registration Enter the "Settings" menu of your Android smartphone and activate the NFC function inside the "Wireless & Networks" menu.Press th is button to set running temperature of fridge :LWK,QWHUQDO8VHUIDFHIRU)LGJHDQG.QREIRU)UHH]HU

A) Super Freezing: LED’s on means starting supper freezing. Reversely, supper freezing is off. B) Setting Temperature of Fridge compartment. The number under which LED is on is the setting temperature.

4. OPERATING CONDITION

After power on, all LED lights on panel are lit up for 1

EN23 This version doesn’t any setting on interface to switch on or switch off the appliance. The only way to switch on/ off the appliance is by plug in / off. NOTES: Turn on the One Touch button on the User Interface by pressing 2 seconds to enable the NFC antenna on the Sky Led. The One Touch label switches on. Depending on the smartphone model and its Android OS version, the process of the NFC activation may be different. Refer to the smartphone manual for more details. Open the App, create the user profile and register the appliance following the instructions on the phone display or the "Quick Guide" attached on the machine. More information, F.A.Q. and the video for an easy registration are available on: www.hooveronetouch.com/how-to NEXT TIME – Regular usage Every time you want to manage the machine through the App, first you have to enable the One Touch mode by turning on the One Touch button. Make sure you have unlocked your phone (from stand-by mode) and you have activated the NFC function; then, follow the steps mentioned earlier. If you want to activate a function (e.g. Super Boost cycle), select it in the App. Follow the instructions on the phone display, KEEPING IT ON the One Touch logo on the Sky Led, when requested to do so by the App. Place your smartphone so that the NFC antenna on its back matches the position of the One Touch logo

the appliance (as illustrated below). Thick cases or metallic stickers on your smartphone could affect or prevent the transmission of data between machine and telephone. If necessary, remove them. If you do not know the position of your NFC antenna, slightly move the smartphone in a circular motion over the One Touch logo until the App confirms the connection. In order for the data transfer to be successful, it is essential TO KEEP THE SMARTPHONE ON THE DASHBOARD DURING THESE THE FEW SECONDS OF THE PROCEDURE; a message on the device will inform about the correct outcome of the operation and advise you when it is possible to move the smartphone away. The management and the control of the machine via App is only possible "by proximity": it is therefore not possible to perform remote operations (e.g.: from another room ; outside of the house). The replacement of some components of the smartphone (e.g. back cover, battery, etc...) with non-original ones, could result in the NFC antenna removal, preventing the full use of the App. 9d) Ki ndly advice the user to move the buttnm C, setting temperature w der super freezing mode , you can’t change setting freezing mode can be activated. LED in the left will be apply super freezing mode.

1) Enter into super freezing mode

freezing fuction for 24 hours. In order to get max freezing capacity, please put fresh foot into freezer compartment after starting super

:LWK'LJLWDO([WHUQDO8VHULQWHUIDFH

hen you want to freeze food in a short time, you can Constantly press Key C for over 3 seconds, super switched on.

2) Quit from Super Freezing mode

Quit from Super Freezing mode by below conditions: x Press key C for over 3 seconds to choose other setting. x Running time of Super Freezing mode is more than 50 hours.

3) After exit super freezing mode, the appliance will run

with same setting before you start super freezing mode. The left LED light will be switched off.

temperature of fridge compartment by pressing button C. when you try to do so, the left LED light will flickering for 3 seconds to remind you of wrong operation.

6. Temperature setting of Fridge Compartment

Under non-supper freezing mode, repeatedly press ill be changed in a circle of “2ćˈ3ćˈ4ćˈ6ćˈ8ć”. If you press one time, the temperature is changed once; the number under which LED is lighted on is the setting temperature. Useful hints: Please follow the below table to choose setting temperature of fridges. Ambient Temperature Recommended Temperature Sum mer (>32ć) 4ćˈ6ćˈ8ć Normal

ory function after Power off The settings at the moment that power is off will be remembered, appliance will automatically re-start to run with setting of the moment that power is off when the power supply is restored.

8. Delay protection function

The appliance has a function that delay to start compressor resulting in protecting compressor, once compressor is stopped, the time from this stop of compressor to next start of compressor must be at least 5 minutes.

9. Troubleshooting tips

1). If temperature sensor of fridge compartment is flawed, LED light under number 2 will be flickering continuously. 2). Defrost sensor is flawed, LED Light under number 3 will be flickering continuously. 3). Ambien t temperature sensor flawed, light under number 4 will be flickering continuously. 4). If communication between user interface and mainboard is flawed, all lights in display will be flickering continuously.

10. Temperature Control of Freezer Compartment

1). freezer temperature setting knob: 2). set freezer temperature The freezer temperature can be adjusted by changing the knob to change the air distribution between freezer and fridge. 3). the freezer temperature adjustment a) Freezer compartment temperature can be adjusted by the know, the temperature rises gradually when the knob is moved from left to right b) Wh en knob is moved to right end, air flow from freezer to fri dge will increase to max level; the temperature of freezer wi ll increase. Kindly recommend that this mode onl y is used when freezer is empty or rarely food is preserved in freezer compartment. c) W hen knob is move to left end, air flow from freezer to fridge will decrease to min level, the temperature of freezer wi ll decrease. Kindly recommend that this mode

only used when mounts of food is stored in freezer compartmen t. The lasting time is no more than 8 hours. tem perature knob

to the middle position at normal conditions, however,

er can also adjust the temperature range according to the f ood storage situation.

EN24 secon d, and the appliance will run with same setting (mode and temperature) as last time the appliance was set. If it is switched on first time, it runs with default setting.

11:LWK'LJLWDO([WHUQDO8VHULQWHUIDFHDQG:L)L

For all products, with the exception of T otal No Frost, the temperature bet- ween the refrigerator and freezer is set simultaneously, if you increase/de- crease the refrigerator temperature by 2 or more degrees, then the freezer temperature will automatically increase/decrease by the same value. If the temperature change is less than 2 degrees, then the automatic temperatu- re adjustment will not occur. EN25

-Fi Usage: You can activate/deactivate this function remotely by pressing "Eco Mode" button on the APP.

x Wi-F i Usage: To prevent accidental activations, it is not possible to set the Stand-by mode remotely via the APP as this could result in the deterioration of food. You can however disable this function via the APP (pressing "Wake-Up" button) enabling the refrigerator to return to ECO temperature within 24 hours, ready for your return home.”:LWK/('([WHUQDO8VHULQWHUIDFH For detailed information about HOW TO CONNECT your simply-Fi appliance and HOW TO USE it at its best, go to http://www.candysimplyfi.com or visit the dedicated simply-Fi Customer Service website http://simplyfiservice.candy-hoover.com

Thi s version doesn’t any setting on interface to switch on or switch off the appliance. The only way to switch on/ off the appliance is by plug in / off. EN26

-Fi Usage: You can activate/deactivate this function remotely by pressing "Fast Freeze" button on the APP. Wi-Fi Usage: You can activate/deactivate this function remotely by pressing "Iced Drink" button on the APP. A push-notification will advise you when the drink is ready.

-Fi Usage: To prevent accidental activations, it is not possible to operate the Holiday Function remotely via the APP as this could result in the deterioration of food.

u can however disable this function via the APP (pressing "Cool Ready" button) enabl ing the refrigerator to return to ECO temperature within 24 hours, ready for your return home. Wi-Fi Usage: You can activate/deactivate this function remotely by pressing "Display Lock" button on the APP. Wi-Fi Usage: A push-notification will show you the alarm on your App.16

PRODUCTS WITH SETTING KNOB

Once defrosted, consume food promptly. Do not ever refreeze foods. If you find excessive cooling of the products contained in the refrigerator compartment, gently turn the thermostat knob EN28

8to switch off the products. Please follow the instruction in the chapter of " Turning on /off"

PRODUCTS WITH USER INTERFACE

11) Products with knob: Products with user interface

x To tal no frost Audy( with display on door): remove all the baskets in freezer compartment; x Total no frost ( with internal user interface for fridge and knob for freezer): remove other baskets in freezer compartment but keep bottom drawer in its position. x Frost free model: remove other baskets in freezer compartment but keep bottom drawer in its position. x All normal static models: remove all drawers in freezer compartment.REVERSIBILITY OF THE DOOR (MECHANICAL) REVERSIBILITY OF THE DOOR (ELECTRONIC) so the appliance is level. receptacles. away EN30EN

31cotton-bud Check that there is no obstruction on the glass shelf which will prevent air circulation. Place fruit and vegetables in plastic, such as films, bags or containers. EN32ES33