Arthur 085240130 - Lamp Lucide - Free user manual and instructions

Product type	Indoor light fixture
Brand	Lucide
Model	Arthur 085240130
Use	Indoor only
Protection rating (IP)	IP20
Electrical class	Class I (with earth grounding) or II (double insulation) - check the product
Supply voltage	220-240 V ~ 50/60 Hz
Bulb max wattage	Refer to product label (usually 40 W or 60 W)
Base type	E27 or E14 (depending on model) - check the product
Materials	Metal and glass
Installation	By a qualified electrician, with power off
Warranty	2 years against material and workmanship defects
Maintenance	Clean with a dry cloth; do not use flammable products
Bulb replacement	Allow to cool before touching; observe max wattage
Safety distance	Follow the minimum distance indicated on the lamp from flammable materials
Spare parts	Broken glass parts are covered 14 days after purchase; for others, contact the manufacturer
Recycling	Do not dispose of with household waste; take to an appropriate collection point

Frequently Asked Questions - Arthur 085240130 Lucide

How to correctly install the Arthur 085240130 lamp?

Installation should be performed by a qualified electrician. Turn off the power before any intervention. Connect the wires according to the instructions: ground wire (green-yellow) for Class I models, or without ground for Class II. Follow safety distances from flammable materials.

What type of bulb to use for this lamp?

Use a bulb compatible with the base indicated on the product (usually E27 or E14). The maximum wattage is specified on the lamp label. Never exceed this wattage to avoid any risk of overheating.

Can I use this lamp in a bathroom?

No, this lamp is designed for indoor use only and its IP20 protection rating makes it unsuitable for damp rooms like bathrooms, unless otherwise stated in the manual.

How to clean the Arthur lamp?

Always unplug the lamp before cleaning. Use a soft, dry cloth. Never use liquid or flammable products that could damage electrical components.

What to do if the protective glass is broken?

Immediately replace the damaged protective glass to avoid risk of injury. Glass parts are covered by warranty for 14 days from the date of purchase. For later replacements, contact the manufacturer or an authorized retailer.

Does the 2-year warranty cover all defects?

The warranty covers material and workmanship defects for 2 years provided the unit is installed and used according to instructions. Glass parts are warranted for 14 days. Normal wear, discoloration, and damage caused by misuse or external factors (fire, water) are excluded.

How to know if my lamp is Class I or II?

The electrical class is indicated on the product label. Class I requires an earth connection (symbol ⏚). Class II is double insulated and does not require earth. Never modify the original wiring.

What does the IP20 symbol mean?

IP20 means the lamp is protected against solids larger than 12.5 mm (like a finger), but not against water. Therefore it should not be installed in damp places or exposed to water splashes.

Can I use an LED bulb in this lamp?

Yes, as long as the LED bulb has the correct base and a wattage equivalent to the maximum wattage indicated on the lamp. LED bulbs produce less heat, which can be beneficial.

Where can I find the manual in French?

You can download the manual for free in PDF format on notice-facile.com. If the manual is not available in your language, you can request a translation by providing your email on the product page.

USER MANUAL Arthur 085240130 Lucide

Thank you for purchasing a Lucide original!

This manual will hopefully guide you easily through the installation process. We aim to inspire and illuminate our clients by offering trendy, high-quality and affordable lighting.

Welcome to the community of #illuminatesyourworld

DISCOVER OUR COLLECTION!

Visit our website and discover our entire collection

CURIOUS ABOUT OUR BRAND?

Our brand video gives you a glimpse behind the scenes at Lucide

ILLUMINATESYOURWORLD

Take a look at how others around the world use Lucide products

Item number: 08524/01/30

EAN code: 5411212082763

ARTHUR

RECOMMENDED LUCIDE LIGHT SOURCE

49082/07/60

Dimmable: No

Included: No

General

Color: Black and Copper

Style: Vintage

Shape: Square

Weight: 1,20kg

Warranty: 2 Years

Specifications

Dimmable: No

Light direction: Around (Diffuse)

Adjustable in height: Not In Height Adjustable

Directional: Not Directional

Cable: Yes, Cable With Plug On Product

Cable length: 150cm

Sensor: Without Sensor

Control: On/Off Switch - In The Cord

Power supply: Adapter/Power Grid

IP-Class: 20

Electric Class:1

Number of light sources: 1

Lamp socket: E27

Wattage: 1 × 60W

Power requirements: 220 - 240V 50Hz

ARTHUR

Item number: 08524/01/30

EAN code: 5411212082763

LUCIDE

ARTHUR

Item number: 08524/01/30

EAN code: 5411212082763

Veiligheidsinstructures

Please read this notice carefully and keep it during the lifetime of this product. Follow the instructions for a safe and correct installation and functioning of the light fixture. The manufacturer does not accept any responsibility for damage caused by improper installation and service. Installation should always be done by a qualified electrician.

Always isolate the power before commencing installation, maintenance or repair.

In case of doubts, please contact a qualified electrician.

Please pay attention to locations where the item can be installed (indoor, outdoor, bathroom (for outdoor and bathroom installation, please see further). Indoor items cannot be used in humid places. Do not put the item in contact with water or any liquids or inflammable products. Always respect the minimal distance (indicated on the light) to inflammable products.

During installation, make sure that the cables will not be squeezed or damaged by sharp edges. If the external flexible cable is damaged, it needs to be replaced exclusively by the manufacturer, his service agent, or a qualified electrician.

This is to avoid all risks.

Because the temperature of the item and the bulbs can get very high, they must cool down before being touched. Always use the correct bulb (respect type and maximal wattage as indicated on the product).

Explanation of the symbols which can appear on the fixture

This item is only suitable for indoor use, exclusive bathroom

(except if a higher IP degree permits that the item can be used in the bathroom).

Legislation requires that all electrical and electronic equipment must be collected for reuse and recycling. Electrical and electronic equipment marked with this symbol indicating separate collection of such equipment must be returned to a municipal waste collection point.

Class I: The item has an earth connection. The earth wire (green-yellow) needs to be connected to the earth connection (marked with this symbol).

Class II: The item is double insulated and must not be connected to the earth wire.

Class III: The item is only suitable for lower voltage supply and must not be connected to the earth wire.

IP 20: Protection against contact with a finger

If the protection glass is damaged or broken, it needs to be replaced immediately.

Please respect the minimum distance from the bulb to inflammable objects.

Warranty declaration:

Lucide NV warrants that the products supplied will be free from defects in material and workmanship for a period of 2 years from the date of purchase by the end user, if the item is installed and maintained properly as mentioned in the user manual.

Exclusions for the warranty:

1. Broken glass parts of the fixture will only be replaced within 14 days after purchasing by the end user.
2. Normal wear and tear, discoloring as a result from normal use.
3. Damage caused by external causes like fire, water, wrong use/ installation or maintenance of the product.

For warranty claims the customer needs to hand over defective fixture/part and the original purchase ticket.

Garantieverklaring:

Further explanations can be found on our website.

L U C

D E

ILLUMINATES YOUR WORLD

LUCIDE NV

LUCIDE NV BISSCHOPPENHOFLAAN 145, 2100 DEURNE, BELGIUM

[e-mail] tel: [phone]

www.lucide.com