Ramzi 475068136 - Lamp Lucide - Free user manual and instructions

Product type	Lamp
Brand	Lucide
Model	Ramzi 475068136
Category	Luminaire
Use	Indoor
Protection rating	IP20
Insulation class	Class II (double insulation)
Minimum distance from flammable materials	Respect the distance indicated on the product
Compatible bulb	Respect the type and maximum power indicated on the product
Power supply	Electrical network 220-240 V
Power cable	Flexible cable, replacement exclusively by a professional
Grounding	Not necessary (double insulation)
Glass material	Replaceable protective glass
Maintenance and cleaning	Clean with a dry cloth, do not use liquid products
Installation	By a qualified electrician, cut off the power before any intervention
Warranty	2 years from the date of purchase, glass parts 14 days
Repairability	Call a certified professional
Disposal	Do not dispose of with household waste, recycle at a waste disposal center
Operating temperature	Do not touch the bulb while operating (risk of burns)
Certifications	Compliant with CE standards

Frequently Asked Questions - Ramzi 475068136 Lucide

Where to install this lamp?

This lamp is intended for indoor use only (IP20). Do not install it in a humid room like a bathroom without appropriate IP rating.

What type of bulb to use?

Use the bulb corresponding to the type and maximum power indicated on the product. Do not exceed the indicated power.

How to install the lamp?

Installation must be carried out by a competent person (qualified electrician). Turn off the power before starting.

What to do if the protective glass is broken?

The glass must be replaced immediately by a professional. Do not use the lamp with damaged glass.

Is this lamp suitable for a bathroom?

No, because its protection rating is IP20, which does not protect against humidity. It is only suitable for dry rooms.

Can I touch the bulb when it is on?

No, the bulb becomes very hot. Wait for it to cool down before touching or replacing it.

How to clean the lamp?

Clean with a dry cloth. Never use water or liquid products, risk of electric shock.

What to do in case of malfunction?

First check the power supply. If the problem persists, contact a qualified electrician or customer service.

Is the lamp under warranty?

Yes, 2 years from the date of purchase against any material or workmanship defects. Glass parts are guaranteed for 14 days.

Can I replace the power cable myself?

No, the damaged cable must be replaced exclusively by the manufacturer or a certified electrician to avoid any risk.

USER MANUAL Ramzi 475068136 Lucide

Thank you for purchasing a Lucide original!

This manual will hopefully guide you easily through the installation process. We aim to inspire and illuminate our clients by offering trendy, high-quality and affordable lighting.

Welcome to the community of #illuminatesyourworld

DISCOVER OUR COLLECTION!

Visit our website and discover our entire collection

CURIOUS ABOUT OUR BRAND?

Our brand video gives you a glimpse behind the scenes at Lucide

ILLUMINATESYOURWORLD

Take a look at how others around the world use Lucide products

LUCIDE

Item number: 47506/81/36

EAN code: 5411212470164

RAMZI

RECOMMENDED LUCIDE LIGHT SOURCE

49022/04/67

Dimmable: Yes

Included: No

General

Dimensions LxW xH: 18cm × 18cm × 26cm

Main material: Ceramics

Color: Grey

Style: Cottage

Shape: Round

Weight: 0.50kg

Warranty: 2 Years

Specifications

Dimmable: No

Light direction: Uplight & Downlight

Adjustable in height: Not In Height Adjustable

Directional: Not Directional

Cable: Yes, Cable With Plug On Product

Cable length: 130cm

Sensor: Without Sensor

Control: On/Off Switch - In The Cord

Power supply: Adapter/Power Grid

IP-Class: 20

Electric Class:1

Number of light sources: 1

Lamp socket: E14

Wattage: 1 × 40W

Power requirements: 220-240 V~50 Hz

RAMZI

Item number: 47506/81/36

EAN code: 5411212470164

LUCIDE

RAMZI

Item number: 47506/81/36

EAN code: 5411212470164

Veiligheidsinstructures

Please read this notice carefully and keep it during the lifetime of this product. Follow the instructions for a safe and correct installation and functioning of the light fixture. The manufacturer does not accept any responsibility for damage caused by improper installation and service. Installation should always be done by a qualified electrician.

Always isolate the power before commencing installation, maintenance or repair.

In case of doubts, please contact a qualified electrician.

Please pay attention to locations where the item can be installed (indoor, outdoor, bathroom (for outdoor and bathroom installation, please see further). Indoor items cannot be used in humid places. Do not put the item in contact with water or any liquids or inflammable products. Always respect the minimal distance (indicated on the light) to inflammable products.

During installation, make sure that the cables will not be squeezed or damaged by sharp edges. If the external flexible cable is damaged, it needs to be replaced exclusively by the manufacturer, his service agent, or a qualified electrician.

This is to avoid all risks.

Because the temperature of the item and the bulbs can get very high, they must cool down before being touched. Always use the correct bulb (respect type and maximal wattage as indicated on the product).

Explanation of the symbols which can appear on the fixture

This item is only suitable for indoor use, exclusive bathroom

(except if a higher IP degree permits that the item can be used in the bathroom).

Legislation requires that all electrical and electronic equipment must be collected for reuse and recycling. Electrical and electronic equipment marked with this symbol indicating separate collection of such equipment must be returned to a municipal waste collection point.

Class I: The item has an earth connection. The earth wire (green-yellow) needs to be connected to the earth connection (marked with this symbol).

Class II: The item is double insulated and must not be connected to the earth wire.

Class III: The item is only suitable for lower voltage supply and must not be connected to the earth wire.

IP 20: Protection against contact with a finger

If the protection glass is damaged or broken, it needs to be replaced immediately.

Please respect the minimum distance from the bulb to inflammable objects.

Warranty declaration:

Lucide NV warrants that the products supplied will be free from defects in material and workmanship for a period of 2 years from the date of purchase by the end user, if the item is installed and maintained properly as mentioned in the user manual.

Exclusions for the warranty:

1. Broken glass parts of the fixture will only be replaced within 14 days after purchasing by the end user.
2. Normal wear and tear, discoloring as a result from normal use.
3. Damage caused by external causes like fire, water, wrong use/ installation or maintenance of the product.

For warranty claims the customer needs to hand over defective fixture/part and the original purchase ticket.

Garantieverklaring:

Further explanations can be found on our website.

L U C

D E

ILLUMINATES YOUR WORLD

LUCIDE NV

LUCIDE NV BISSCHOPPENHOFLAAN 145,2100 DEURNE,BELGIUM

[e-mail] tel: [phone]

www.lucide.com