EP100 - Cooker Campomatic - Free user manual and instructions

Features	Details
Product type	Cooker
Dimensions	To be defined according to the model
Cooking type	Gas/Electric
Number of burners	To be defined according to the model
Built-in oven	Yes/No depending on the model
Oven capacity	To be defined according to the model
Materials	Stainless steel, enameled
Energy consumption	To be defined according to the model
Safety system	Automatic shut-off, gas safety
Maintenance	Regular cleaning of surfaces, burner check
Warranty	To be defined according to the model
Included accessories	Grids, cooking tray depending on the model
Recommended use	For domestic cooking

Frequently Asked Questions - EP100 Campomatic

How to light the Campomatic EP100 cooker?

To light the cooker, turn the control knob corresponding to the cooking zone you want to use clockwise to the ignition position, then press the electronic ignition button.

What to do if the flame goes out during cooking?

If the flame goes out, immediately turn off the cooker, wait a few minutes, then try to light the flame again. Also make sure the gas is turned on.

How to clean the surface of the cooker?

To clean the surface of the cooker, use a soft, damp cloth with a mild detergent. Avoid abrasive products that could scratch the surface.

The cooker does not heat up, what to do?

Check that the gas is open and that the cooker is properly connected. If the problem persists, it may indicate an internal failure, and it is advisable to contact a professional.

How to adjust the cooking temperature?

To adjust the temperature, turn the control knob of the cooking zone to the desired position. Positions range from low to high temperature.

Is the Campomatic EP100 cooker compatible with cast iron pots?

Yes, the Campomatic EP100 cooker is compatible with cast iron pots, as well as other types of pots and pans.

Is there a warranty for the Campomatic EP100 cooker?

Yes, the cooker usually comes with a 2-year warranty. Please refer to the user manual for more details.

How to install the cooker correctly?

For correct installation, follow the instructions provided in the user manual and ensure the cooker is placed on a flat and stable surface.

How to know if the cooker needs maintenance?

If you notice gas leaks, ignition problems, or areas that do not heat properly, this may indicate that maintenance is needed.

How to contact Campomatic customer service?

You can contact Campomatic customer service by phone or email; contact details are usually available on the official Campomatic website.

USER MANUAL EP100 Campomatic

INSTRUCTION MANUAL Cauon: Read and follow all safety and operang instrucon before rst use of this product. Campomac S.R.L. Via Congliachi 5/B . 35031, Abano Terme (Padova), ITALIA

ep100/ep200 IMPORTANT SAFEGUARDS Please read these instrucons carefully before using the appliance. Important: People (including children) who are not able to use the appliance in a safe way, due to their physical, sensorial or mental capacity or their lack of experience or knowledge, must never use the appliance except if they are supervised by a person responsible for their safety or if they previously received instrucons concerning the safe use of the appliance. Close supervision is necessary to prevent children from using the appliance as a toy. Check that your mains voltage corresponds to that stated on the appliance. Never leave the appliance unsupervised when in use. From me to me check the appliance and its cord for damages. Never use the appliance if cord or appliance shows any signs of damage. All repairs should be made by a competent qualied electrician(*). Only use the appliance for domesc purposes and in the way indicated in these instrucons. Never immerse the appliance in water or any other liquid for any reason whatso- ever. Never place it into the dishwasher. Never use the appliance near hot surfaces. Before cleaning, always unplug the appliance from the power supply. Never use the appliance outside and always place it in a dry environment. Never use accessories which are not recommended by the producer. They could constute a danger to the user and risk to damage the appliance. Never move the appliance by pulling the cord. Make sure the cord cannot get caught in any way. Do not wind the cord around the appliance and do not bend it. Stand the appliance on a table or at surface. Make sure the appliance has cooled down before cleaning and storing it. Make sure the cord never comes into contact with the hot parts of the appliance. The temperature of the accessible surfaces may be very high when the appliance is in use. Never touch those surfaces during use, and only handle the buons. Should the symbol be indicated on a certain surface, you need to be careful when handling the product. This symbol means CAUTION, this surface may get very hot during use. Make sure the appliance never comes into contact with inammable materials, EN4 ep100 / ep200 such as curtains, cloth, etc… when it is in use, as a re might occur. Always unplug the appliance when it is not in use, especially since it is not equipped with an on/o switch. Be extremely careful, as oil or fat preparaons might catch re when overheated. When using the appliance under an extractor hood, make sure to observe the minimal distance advised by the producer. It is even wiser to double this distance. Only use the appliance for food that is supposed to be cooked. Your appliance must never be switched on through an external mer or any kind of sepa- rate remote control system. Immediately unplug the appliance if a crack appears and make sure it is controlled by a qualied competent electrician

Competent qualied electrician: aer sales department of the producer or importer or any person who is qualied, approved and competent to perform this kind of repairs in order to avoid all danger. In any case you should return the appliance to this electrician. USE

• First check that the voltage marked on the product is the same as your supply voltage.

• Select a suitable posion close to an electric socket, on a dry and even surface.

• Make sure the controls are in the OFF posion (MIN facing upwards). Plug in.

• The invisible protecve coang must be removed before you can use the appliance. To do this, set the controls to the maximum seng and leave switched on for approxi- mately 10 minutes. Smoke will develop, make sure that the room is venlated. Switch o the cooking plates and allow to cool down completely. The cooking plates are now ready for use.

• Always use at-boomed saucepans, which make good contact with the cooking plates. The saucepan bases should ideally be of the same size as the cooking plates.

• Select the temperature. The cooking plates have a range of temperatures.

• Due to the cooking plates’ construcon, residual heat will remain aer switching o. This may be used to keep food warm for a short period.

• Aer use, turn temperature dial to “MIN” and unplug the appliance from electrical outlet. EN5 ep100/ep200 CLEANING

• Before cleaning, unplug and wait for the appliance to cool down.

• Wipe with a moistened cloth.

• Do not clean with any abrasive scouring pad or steel wool, as this will damage the n- ish.

• Do not immerse in water or any other liquid.

PROTECTION OF THE ENVIRONMENT

In order to preserve our environment and protect human health, the waste electrical and electronic equipment should be disposed of in accordance with specic rules with the impli- caon of both suppliers and users. For this reason, as indicated by the symbol on the rat- ing label, your appliance should not be disposed of as unsorted municipal waste but should either be returned to the vendor, or disposed of in a separate collecon point performing waste recovery by means of reuse, recycling or use for other applicaons. EN6 ep100 / ep200