ERES35800X - Fridge ELECTROLUX - Free user manual and instructions

USER MANUAL ERES35800X ELECTROLUX

User manual Benutzerinformation Notice d'utilisation Gebruiksaanwijzing r efrigerator kühlgeräte r éfrigérateur koelkast ERES35800We were thinking of you when we made this product3 Welcome to the world of Electrolux Thank you for choosing a first class product from Electrolux, which hopefully will provide you with lots of pleasure in the future. The Electrolux ambition is to offer a wide variety of quality products that make your life more comfortable. You fin d some examples on the cover in this man u al. Please take a few minu tes to study this manual so that you can take advantage of the benefits of your new machine. We promise that it will provide a superior User Experience delivering Ease-of-Mind. Good luck!4 The following symbols are used in this manual: Important information concerning your personal safety and information on how to avoid damaging the appliance General information and tips Environmental information Scrapping old appliances

he symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the en vironment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local council, your household waste disposal service or the shop where you purchased the product. This appliance is n ot intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concernin g use of the appliance by a person responsible for their safety.5 Safety instructions Your new fridge may have other functions compared to your previous one. Carefully read these instructions

learn how the appliance works and how to care for it. Keep th e instru ction booklet. It will come in handy if you later sell the cabinet or give it

somebody else. These warnings are provided in the interests of your safety. Ensure th at you understand them all before installing or using the appliance. Your safety is of paramount importance. If you are unsure about any of the meanings or warnings contact the Customer Care Department. For the User

• The refrigerator is intended for th e storage of foodstuffs and the production of cold water, with or withou t carbon dioxide, for normal household use in accordance with these instructions.

• If the gas cylinder is used for other purposes th an that inten ded or if it is filled by an un au thorised person , all guarantees automatically become null andvoid.Inordertoensurereliable functioning, only an Electrolux Cylinder may be used.

• Do not keep explosive gases or liquids in the refrigerator or freezer compartment. They may explode and cause injury and material damage.

• Do not let sharp objects come into contact with the refrigeratin g system on th e back of and in side the cabinet. If the refrigerating system is punctured, the cabinet will be damaged and foodstu ff inside may spoil.

• Do not keep carbonised drinks or bottles in the freezer compartment. The glass bottles may break.

• Th e cabinet is heavy. Th e edges and projectin g parts of the cabinet may be sharp. Be careful when moving the cabinet and always use gloves. Child Safety

• Pay attention so that small children do not gain access to the operating controls or the inside of the cabinet. WARNING Keep ventilation openings, in the appliance en closure or in the built- in structure, clear of obstruction . WARNING Do n ot use mechan ical devices or oth er means to accelerate the defrosting process, other than those recommended by the manufacturer. WARNING Do n ot damage the refrigerant circu it. WARNING Do n ot use electrical appliance inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer. WARNING Connect to potable water supply only.6 Contents Welcome to the world of Electrolux 3. Scrapping old cabinets 4........... Safety instructions 5............ Contents 6...................... USE 7........................... Control Panel 7................... DISPLAY 7....................... Functions Menu 8................. Select /Switch off /Switch on 8...... Temperature regulation 8........... Switchin g off 8.................... Ambient Temperature Function 8..... Child Lock Function 9.............. Shopping Function 9............... Eco mode Function 9.............. Drinks Chill Function 9............. Use of the fridge compartment 9..... Temperature regulation 9........... Holiday Function "H" 10............ Door open acoustic alarm 10........ Control Panel (water dispenser) 10... Cabinet interior 12................. HINT and TIPS 13................. Saving energy 13.................. Food Storage 13.................. Protect the environment 13......... MAINTENANCE and CLEANING 14.. Removing the ventilation grille 14.... Cleaning 14...................... Servicing and cleanin g the water dispenser. 14.................. Service during operation 15......... To change the lamp 15............. Change of carbon filter 15.......... Defrosting the fridge 16............. When the appliance is not in use 16.. SOMETHING NOT WORKING 16.... TECHNICAL SPECIFICATION 18.... Permissible water pr essur e (to ensure reliable function). 18............ INSTALLATION 19................. Unpacking 19..................... Remove the transport supports 19... Cleaning 19...................... Connecting the water h ose. 19...... Electrical cord 20.................. Installation of carbon filter 20........ Installin g the cabinet 20............ When th e water system is started for the first time 22................... Electrical connection 23............7 USE Position and clean the cabinet as explained in the section "Installation". Check that the drain hose at the rear of the cabinet discharges into the drip tray. Before inserting the power plug into the outlet and switching on the cabinet for the first time, leave it standing upright for about 2 hours. Otherwise the compressor may sustain damage. This time will allow the oil sufficient time to return to the compressor. Control Panel

A - Appliance button ON/OFF B - Temperatu re regulation button C - Temperature and function indicator D - Function button E - Confirmation button DISPLAY Excessive temperature alarm and Door open acoustic alarm Indicator (if foreseen) If on the temperature in dicated is the ambient temperature Positive

emperatu re indicator Temperatu re indicator If on the Child Lock function is on If on the Shopping function is on If on the Drink Chill mode function is on If on the Eco Mode function is on8 First switch on After plugging the plug into the power outlet, if the display is not illuminated, press key (A), appliance on. For a correct storage of the food select the Eco mode function that guarantee the following temperature is set: +5°C in the fridge

• To select a different temperature see "Temperature regulation". Functions Menu By activating the key D the fu n ctions menu is operating. Each function could be confirmed by pressing button E. If there is n o confirmation after some seconds the display will go out from the menu and return in normal condi-tion. The following functions are indicated: Ambient Temperature Child Lock function Shopping function Eco Mode function Drinks Chill function Select /Switch off /Switch on Temperature regulation The temperature may be regulated by pressing the key (B) to set the desired temperature. By pressing the key B the curren t tem- perature setting flashes on the indica- tor and by pressing the key B again it is possible to change it. Youconfirmthechoiceofthetempe- rature either by pressing the key E, (you will hear the buzzer) or by waiting for some seconds (you will not hear the buzzer). Then the indicator shows the inside compartment temperature again. The newly selected-temperature mu st be reached after 24 hours. It is not necessary to set the tempera- ture again after long periods of non use as the temperature remains stor ed. Attention! During the stability period by the first starting the temperature displayed can not correspond to the setting tempe- rature. During this time it is possible that the temperature displayed is differen t than the setti n g temperature. Switching off The appliance is shut off by pressing key (A) for more than 1 second. After this, a countdown of the temperature from -3 -2 -1 will be shown. Ambient Temperature Function The ambient temperature function is activated by pressing key D (several times if necessary) until the corres- ponding icon appears

In this condition the selected tempera- ture is the ambient temperature. You must confirm the choice by pr essing key E within few seconds. You will hear the buzzer and the icon remains lighted. It is pos sib le to de-activ at e the functio n atanytimebypressingkeyDuntilthe correspo nding icon will flash and then key E.9 Child Lock Function The Child Lock function is activ at ed by pr es sing key D (s ev eral times if neces s a r y) until the co rre s p ond ing ico n appears

You must confi r m the choice by pr e s - sing key E within few seconds . You will hear the buzz er and the icon remains light ed. In this condition any possible operation through the keys does not cause any change as long as this function is activated. It is possible to de-activate the fu n ction atanytimebypressingkeyDuntilthe corresponding icon flashes and then key E. Shopping Function If you need to insert a large amount of warm food, for example after doing the grocery shopping, we suggest you act i v a te the Shopping funct ion t o chill the products more rapidly and to avo id warming the other food which is alr eady in the refr ig erat o r. The Shopping function is activated by pressing key D (several times if neces- sary) until the corresponding icon appears . You must confirm the choice by pressing key E within a few seconds. You will hear the buzzer and the icon will remain lit. The Shopping function shuts off auto- matically after approximately 6 hours. It is possible to de-activate the function atanytimebypressingkeyDuntilthe corresponding icon will flashes and then key E. Eco mode Function The Eco mode function is activated by pressing key D (several times if neces- sary) until the corresponding icon appears . You must confirm the choice by pressing key E within few seconds. You will hear the buzzer and the icon remains lighted. In this condition the chosen tempera- tures are automatically set (+ 5°C and - 18°C), in the best conditions for storing food. It is possible to de-activate the function at any time by ch an ging the selected temperature in one of the compart- ments. Drinks Chill Function The Quick Chill function permits the rapid cooling of cans an d bottles taking forced cold air into them. Put the drinks on the Quick Chill shelf and open the air lever to the maximum. The Quick Chill function is activated by pressing key D (several times if necessary) until the corresponding icon appears

When the cooling is finished de-acti- vate the function by pressing key D until the corresponding icon will flash, then key E an d reset the air lever to the minimum . Use of the fridge compartment Temperature regulation The temperature of this compartment may be regulated between +2°C and +8°C. During normal functioning the indicator shows the temperature inside the fridge.10 Attention! Difference between the temperature displayed and temperature setting is normal. Especially when: - a new setting has recently been selected - the door has been left open for a long time - warm food has been placed in the compartment. Holiday Function " H" The holiday function sets the tempera- ture at + 15°C. This fu n ction allows you to keep the refrigerator shu t an d empty during a long holiday period ( e. g. the summer holidays) without the formation of a bad smell. The Holiday Function H may be regu- lated by pr essing the key B. By pres- sing the key B the cu rrent temperature setting flashes on the indicator. Press the key B again. When the letter H appears on the display, confirm the choice of the temperature or by pressing the key E, (you will hear the buzzer) or by waiting for some seconds (you will not hear the buzzer). Now the refrigerator is in the Holiday function in the energy saving mode and the indicator shows the letter H. It is possible to de-activate the function at an y time by changing the selected temperature in the compartment. Attention! The fridge compartment must be empty whilst the Holiday function is on. Door open acoustic alarm An acoustic alarm will sound when t he do or is left op e n for ar ound 5 minut es. The door open alarm conditions are indicated by: - flashing of the icon

H. Yellow indicator lamp Lights up when the locking function has been activated.

I. Button for carbonated water.

-Usedforthechoiceofcarbonated water. - For the engagement a n d disengagement of the locking fu n ction. J. Button for ordinary water. - Used for the ch oice of ordinary water. - Switches the background lighting on and off.11 - Switches of f the indicator lamp for water filter replacement. K. Yellow indicator lamp Lights up when the water filter must be changed. L. Water out-feed Activated when a glass or something similar is pressed upwards against the flap. M. Flap N. Lighting The functions o f the water- dispenser The locking function: The locking function is activated by the production plant. For temporary unlocking: Keep the button (I) pressed in for about three seconds until the yellow indicator lamp (H) goes out. The locking function is re-activated automatically after about three seconds. For permanent unlocking: Keep the buttons (I) and (J) pressed in at the same time for about three seconds. The button (I) or (J) lights up to indicate unlocking. To activate the locking function: Keep the buttons (I) and (J) pressed in at the same time for about three seconds. Activation is indicated by the yellow in dicator lamp (H) lighting up. Selecting and obtaining water: Before obtaining water, selection is carried out either by pressing the button for carbonated water (I) or the button for ordinary water (J). The actual ch oice is indicated by the button which lights u p. The selection of water can be changed while the water is running. Water is obtained by pressing a glass or other container against the opening (M). Stop the water flow by moving the glass or container downwards away from the opening (M). Any water that drips or is spilled is collected in the drip bowl below the water dispenser. When the carbonated water is being obtained, there is a slight afterflow when the glass is removed. The drip bowl can be detached and emptied when necessary. Lighting: The water dispenser lighting (N) illumi- nates automatically when water is obtained. For continuous lighting:

1. Make sure that the water dispenser

water (J) pressed in for about three seconds u n til the illuminates. The lighting then illu minates with about 50 % of its full intensity. To switch off the lighting:

1. En sure that the water dispenser i s

water (J) pressed in for about three seconds until the lighting goes out.12 Indicator lamp for the water filter: The water dispenser is fitted with an indicator lamp (K) which shows when it is time to ch an ge the water filter. When the indicator lamp stays on, then the water filter has been utilised to about 80 % of its expected lifetime. In this situation, it is recommended that you buy a replacement filter. When the indicator lamp starts flashing, the water filter has been u tilised to 100% of its lifetime. Replace the filter without delay. After replacing the filter cartridge, see the section "Service during operation". The indicator lamp can be switched off by holding the button for ordinary water (J) pressed in for about three seconds until the indicator lamp goes out. Carbon filter's function: The built-in carbon filter means that strong smelling groceries can be placed near oth er groceries without affecting their taste or aroma. Cabinet interior The shelves and door compartments are removable an d can easily be re-arranged. Certain shelves must be lifted up by the rear edge to en able them to be removed. The lower door compartment and the glass shelf above the vegetable drawer must not be moved. They are fitted to ensure air circulation in side the cabinet. Shelves with a raised edge should be placed with the raised edge facing the rear wall of the cabinet. The vegetable drawer has a ventilation edging to increase the circulation of air and reduce the risk of condensation. Quick chill shelf: The lower Quick ch ill shelf can be placed in one of the u pper grooves. To maintain the best performance the shelf should be placed in the second groove from the top.13 Bottleholder Thesideofthebottleholderis moveable to enable a more flexible placement of bottles in front of the grid. During chilling of bottles the article should be centrally placed in front of the grid to obtain the best chilling effect. The bottle support can be pulled out when chilling larger bottles. For a description of this functions start and stop, see u n der heading Quick Chill. Dismantling of the bottleholder. To loosen the holder from the shelf. HINT and TIPS Saving en ergy

• Pay careful attention to where the cabinet is placed. See the section "Installation". When installed correctly, the cabinet will consume less energy.

• Try to avoid keeping the door open for long periods, or opening the door too frequently as warm air will en ter the cabinet, an d cau se the compressor to switch on unnecessarily often.

• Ensure there are no obstructions preventing the door from closing properly.

• Thaw frozen food in the fridge. This will ensure safer defrosting of foods and reduce the work of the refrigeration unit

• It is advisable to periodically clean the refrigeration system at the back of the appliance with a duster or vacuum cleaner.

• Always leave warm food to cool down to room temperature before placing in the fridge.

• Make sure the door gasket is complete and always clean. Food Storage

• To obtain the best results from your appliance, neither h ot foods nor liquids which may evaporate, should be placed in the l arder compartment.

• Avoid buying frozen food if you can not store it straight away. The use of an insulated container is advisable. When you arrive home place the frozen food in the freezer immediately.

• Ensure that food placed in the freezer is dated and labelled an d u sed in date order to ensure that food is consumed at its best. Remove suspect food from you appliance and clean, refer to cleaning and maintenance. Protect the environment

• Hand over the cabinet packaging and discarded fridges an d freezers to a recycling station. C ontact your local council or En vironmental Health office for more information.

• Keep foodstuff in re-usable containers. Cut down on disposable material as much as possible.

• When cleanin g the cabinet, use a mild washing-up detergent.

• Follow the advice in the section "Saving energy"

• The door gasket and coolant used in this cabinet will not harm the ozone layer.

• All parts in the packaging can be recycled.

• The cabinet has been designed for easy dismantling and subsequent recycling.14 MAINTENANCE and CLEANING Removing the ventilation grille The ventilation grille can be removed, e.g. to wash the grille. Make sure the door is open when removing the ventilation grille. Unsnap the upper edge of the grille by pulling outward/downward. Then pull the grille straight out to completely remove it. Cleaning Clean the cabinet at regular intervals. Internal C lean in g Disconnect the appliance from electricity supply. Clean the inside an d accessories with warm water and bicarbonate of soda (5ml to 0,5 litre water) Rinse and dry thoroughly. Regularly check the door seals and wipe clean to ensure they are clean and free from debris. External C l ean in g Use water/neutral soap emulsion for cleaning the surface of stainless steel, anti-finger-print coated. Do NOT use abrasive paste. Wash the outer cabinet with warm soapy water. Remove the ventilation grille (see the section "Removing the ventilation grille") and vacuum-clean under the cabinet. Once or twice a year dust the condenser (black grille) and the compressor at the back of the appliance, with a brush or vacuum cleaner, as an accumulation of dust will affect the performance of the appliance and cause excessive electricity consumption. When moving the cabinet, lift it by the front edge to avoid scratching the floor. Servicing and cleaning the water dispenser. Never use clean in g agents with a grinding or aggressive effect. When necessary, clean the surfaces of the dispenser and the water container that are accessible from the outside, using only a soft cloth and warm water. The dispenser drip bowl can be cleaned with a tepid solution of washing up liquid. If the system is not be used for a long period turn off the water connection to the refrigerator. A filter that has been in service shall not be exposed to temperatures below 0 °C as cracking of the filter body may occur due to freezing expansion. If the filter still is to be preserved for later reuse, suitable storage temperature will be +5 °C.15 When the refrigerator is to be u sed again, rinse the system through thoroughly by draining off at least thr ee litres (5 pints) of water. If necessary, all systems containing water must be sanitized by orderin g the necessary sanitizing kit through Electrolux Service Force Centre (tel: +44 8705 929 929) or thr ough our website www.electrolux.co.uk. Service during operation The water filter is replaced as follows: Place a piece of kitchen tissue or a dishcloth in the space u n der the filter. Remove the filter by turning it clockwise. A small amount of water will run out. Dry off and fit the new filter. See the section "When starting the water system for the first time". The water connection does not need to be switched off when changing the filter. Replacement filters can be ordered from Electrolux Service Force Centre. See the section "Service and replacement parts". The gas cylinder is replaced as follows: remove the gas cylinder and transfer the adapter to the new cylinder. The replacemen t gas cylinder is obtained through your local dealer. To change the lamp The light is switched on automatically when the door is opened. Before replacing the light bulb, disconnect the power plug from the outlet. Disassemble the lamp by using a screwdriver in the recess on the lamp insert. To prise it out of its location. Assemble a new lamp by guiding it into a centred position an d press un til it snaps into place. Use a halogen bulb of the same type, maximum rating of 20 W. Change of carbon filter To maintain the best performance the carbon filter should be ch an ged once a year with n ormal usage. New carbon filters can be purch ased from your local dealer. The filter is placed behind the grill and can be reached by opening the cover. The cover can be opened by turnin g the cover outward. The carbon filter is pulled out of its slot. The new carbon filter is placed in the existing slot - The filter should be handled carefully so fragments do not loosen from the surface.

Defrosting the fridge The fridge is defrosted automatically every time the compressor stops. Frost formation can be prevented by:

• not putting warm foodstuff inside the cabinet.

• avoiding frequently opening the door or keeping it open too long. When the appliance is not in use Disconnect the appliance from electricity supply. Empty all foods and clean the appliance, leaving the doors ajar to prevent unpleasant smells. If the cabinet is to be kept on, ask somebody to check it once in a while to prevent the food inside from spoiling in case of a power failure.

SOMETHING NOT WORKING

Before contacting your local Service Force Centre ch eck the following point: Problem Possible cause / Remedy ”” is displayed in the temperature display. An error h as occurred in measuring the temperature. C all your service representative. (The cooling system will continue to keep food products cold, but temperature adjustment will n ot be possible.) It is too cold inside the refrigerator. Set a warmer temperature. It is too warm inside the refrigerator. Set a lower temperature. Put food products in the right place in side the refrigerator. See the chapter "Temperatu re inside the refrigerator". Distribute the food products to allow cold air to circulate around them. Make sure that the door is completely closed and that the insulating strip is complete and clean. Water comes out on the floor. Place the drain hose at the back of the cabinet above the drain bowl. See the chapter "Before using the cabinet the first time". The compressor operates continuously. Set a warmer temperature. Make sure that the door is completely closed and that the insulating strip is complete and clean.17 Sound level in cabinet is too high. The refrigerating system will always produce some sounds. A pulsing sound is heard when coolant is pumped inside the cooling pipes. A ticking sound from the thermostat can be heard when the compressor switches on and off. The sound level varies depending on the operation of the cabinet. If you feel the sound level is incorrect: Make sure the pipes at the back of the cabinet do not touch each other. Carefully bend them if they do. If the cushion spacers (between the cabinet wall an d pipes) come loose, put them back in place again. Carefully follow the instructions in the chapter "Installing the cabinet". The cabinet does not operate at all. Cooling or in terior light does not operate. No indicator lamps light. Power does n ot reach the cabinet. (Try connecting another electrical device to the power outlet.) The cabinet is not switched on. Thefusehasblown. The power plug is n ot properly connected. Not enough carbon dioxide in the water Incoming water pressure too low. The carbon dioxide is running out. Replace the gas cylinder. Too much carbon dioxide in the water Dilute with ordinary water. (See the section "The water dispenser functions") No carbon dioxide. The gas cylinder is empty. Replace the gas cylinder. Drain off a large amount of carbonated water (about 1 litre) Incoming water pressure too low. Water flow very low Remove and clean the strainer in the connecting valve. Sediment in the water. Replace the filter or install a pre-filter.18 Only gas comes out when opening Incoming water pressure too high. Install a pressure-limiting device. Capacity temporarily exceeded. Wait for ten minutes. The water dispenser lamp and the yellow indicator lamp flashes Leakage at the water connection. Internal leakage, please contact your local Electrolux Service Force Centr e. Indicator lamp for the water filter flashes. The filter h as been totally utilised. Replace the filter. The indicator lamp stays on and shows yellow 80 % of the filter capacity expended. Buy a new filter. Delivery is interrupted after a short time The maximum time of two minutes is attained. Continue with delivery. If after above checks there is still a fau lt call your local Service Force Centre. In-guarantee customers should ensure that the above checks have been made as the engineer will make a charge if the fau lt is not a mechan ical or electrical breakdown. Please n ote that proof of purchase is required for in- guarantee service calls. TECHNICAL SPECIFICATION Model ERES35800W/ERES35800X Net capacity Refrigerator l 324 Energy consumption kWh/y 175 Dimension mm Height 1800 Width 595 Depth 650 Permissible water pressure (to ensure reliable function). The total flow in the system can vary, depending on local water conditions and/or water pressure. Lowest permissible water pressure. 2,5 bar (250kPa) Consult your installer if water pressure is less than 2,5 bar. Highest permissible water pressure. 5 bar (500kPa) If water pressure exceeds 5 bar, than a reduction valve must be fitted (available from your specialist shop).19 Do not connect the appliance i n spaces where ambient temperature can decrease to below freezing. The appliance may only be connected to drinking water supplies. The appliance may only be connected to cold water supplies. INSTALLATION Unpacking Unpack the cabinet and check that it is in good condition and free of any transport damage. Notify the dealer immediately of any damage. Han d the packaging over for recycling. For more information, contact your local council or the dealer. Do not allow children to play with the packaging. The plastic film can cause suffocation. Remove the transport supports Removethetapeandthetransport supports from

• theshelves Remove the transport support on the glass shelf by pushing the support forwardalongtheedgeoftheshelf until it stops. Take hold of the rear edge of the glass shelf and pull the shelf and transport support forward until the shelf tilts and the transport support can be removed. Some models are fitted with a silencing pad under the cabinet. Do not remove this pad. Cleaning Wash the inside of the cabinet using lukewarm water, a mild washing-up detergentandasoftcloth. Connecting the water hose. The water coupling is connected to a water tap with an external 3/4 inch thread. This work is to be carried out by a skilled plumbing installation technician. The refrigerator is to be connected with a shut-off cock. There are different type-approved taps and tap assemblies on the market. The water h ose must not be cracked, squeezed or be in tight bends.20 Before the refrigerator is taken into use in its final location, ensure that the water connection has been correctly carried out, that there is no leakage at the connection to the water tap, and that the four spacers are properly in position, see the illu stration. We recommen d that the appliance is placed on a "run-off" mat intended for refrigerators and freezers, which makes it easier to detect possible leakage. Electrical cord Do not remove the power cord by pulling on its lead, particulary when the product is being pulled out of its niche.

• Damage to the cord may cause a short-circuit, fire and/or electric shock.

• In the event of damage to the appliance's main cable, only an authorised service company recommended by the manufacturer or a similarly qualified person may adjust it in order to avoid shock hazard for the user. Installation of carbon filter On delivery the carbon filter is placed in a plastic bag to secure the len gth of the carbon filter life. The filter should be placed behind the grill before the cabinet is turned on. The cover can be opened by turnin g the cover outward. The carbon filter is then mounted in the slot found in the back, see the illu stration. The filter should be handled carefully so fragments do not loosen from the surface.

Installing the cabinet When two appliances are placed beside each other, the spacers enclosed in the plastic wrapping should be glued between the appliances. As shown in the illustration.21 Make sure that the power plug is not squashed or damaged by the back of the product.

• A damaged power plug may overheat and cause a fire. Do not place heavy articles or the product itself on the power cord.

• there is a risk of a short circuit and fire. If the power plug socket is loose, do not insert the power plug.

• there is a risk of electric shock or fire. To obtain the best performance from the cabinet, ensure:

• the cabinet is placed in a dry, cool place and is not exposed to direct sunlight.

• the cabinet is n ot placed close to a source of heat, e.g. a cooker or dishwasher.

• the cabinet is level. The cabinet should not lean against any wall. If necessary adjust the feet using the adjustment spanner supplied.

• there is good air circulation around the cabinet and that the air ch an nels below and behind the cabinet are not blocked. The ventilation space above the cabinet must be at least 4 cm. The ventilation space can either be a) directly above the cabinet, or b) behind and above the top cupboard. In this case, the space behind the cupboard must be at least 50 mm deep. 50mm

Cabinet is placed at a location where the ambient temperatur e corresponds to the climate classification*, for which the appliance is design ed.

• See on the rating plate on the inside of the appliance. The following table shows which ambient temperature is correct for each climate classification. Climate classifi- cation for an ambient temperature of +10°C to +32°C +16°C to +32°C +18°C to +38°C +18°C to +43°C

Check that the drain hose at the rear of the cabinet discharges into the drip tray.22 If the cabinet is placed in a corner an d the side with the hinges facing the wall, the distance between the wall and the cabinet mu st be at least 230 mm to allow the door to open enough so that the shelves can be removed. The power plug must be accessible after installation of the cabinet. When the water system is started for the first time. The following should be carried out when the appliance is correctly connected to th e water supply in the building: Open the tap on the water connection and start up the refrigerator. The water system main valve opens and the system starts to fill up. W ait for five minutes. Unpack the filter provided and connect it as follows: - Remove the filter protective cap and insert th e filter connector into th e filter seat and turn as shown in the illustration (2) until the filter engages and the projection on the filter cartridge is opposite the mark on the plastic cover. See also the illustration and the instructions on the inside of the service hatch.

- Unlock the water dispenser. See the section "The water dispenser functions" Select carbonated water and drain off about 1.5 litres (2.5 pints) of water. There may be some air to start with. Connect the gas cylinder provided as follows: - Take out the gas cylinder from plastic bag and screw the gas cylinder into the adapter (3) for this purpose, which is located in the cabinet, doing this by hand without tools.

- Place the gas cylinder with adapter in the valve and ensure that the valve bracket hooks are under the counterhold on the adapter (5). Then turn up the bracket lever (6) in one continuous movement. See the illustration and the instru ctions on the inside of the service hatch.